CISCO-IETF-MPLS-TE-EXT-STD-03-MIB Table View

This table allows the administrator to map a node or
LSR Identifier (IP compatible [Global_Node_ID] or ICC)
with a local identifier.
          
          
This table is created to reuse the existing
mplsTunnelTable for MPLS based transport network
tunnels also.
Since the MPLS tunnel's Ingress/Egress LSR identifiers'
size (Unsigned32) value is not compatible for
MPLS-TP tunnel i.e. Global_Node_Id of size 8 bytes and
ICC of size 6 bytes, there exists a need to map the
Global_Node_ID or ICC with the local identifier of size
4 bytes (Unsigned32) value in order
to index (Ingress/Egress LSR identifier)
the existing mplsTunnelTable.

cmplsNodeConfigEntry row .1.3.6.1.4.1.9.10.146.1.1.1

An entry in this table represents a mapping
identification for the operator or service provider
with node or LSR.

As per [RFC6370], this mapping is

represented as Global_Node_ID or ICC.
…

Indexes

cmplsNodeConfigLocalId

Column	Syntax	OID
cmplsNodeConfigLocalId This object allows the administrator to assign a unique local identifier to map Global_Node_ID or ICC.	CISCO-MPLS-TC-EXT-STD-MIBCMplsLocalId Type Constraints: range: 1..16777215	.1.3.6.1.4.1.9.10.146.1.1.1.1
cmplsNodeConfigGlobalId This object indicates the Global Operator Identifier. This object value should be zero when mplsNodeConfigIccId is configured with non-null value.	CISCO-MPLS-TC-EXT-STD-MIBCMplsGlobalIdr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.10.146.1.1.1.2
cmplsNodeConfigNodeId This object indicates the Node_ID within the operator. This object value should be zero when mplsNodeConfigIccId is configured with non-null value.	CISCO-MPLS-TC-EXT-STD-MIBCMplsNodeIdr/w	.1.3.6.1.4.1.9.10.146.1.1.1.3
cmplsNodeConfigIccId This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when mplsNodeConfigGlobalId …	CISCO-MPLS-TC-EXT-STD-MIBCMplsIccIdr/w Type Constraints: range: 1..6	.1.3.6.1.4.1.9.10.146.1.1.1.4
cmplsNodeConfigRowStatus This object allows the administrator to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.146.1.1.1.5
cmplsNodeConfigStorageType This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.146.1.1.1.6

This read-only table allows the administrator to retrieve
the local identifier for a given Global_Node_ID in an IP
compatible operator environment.
          
This table MAY be used in on-demand and/or proactive
OAM operations to get the Ingress/Egress LSR identifier
(Local Identifier) from Src-Global_Node_ID
or Dst-Global_Node_ID and the Ingress and Egress LSR
identifiers are used to retrieve the tunnel entry.
          
This table returns nothing when the associated entry
is not defined in mplsNodeConfigTable.

cmplsNodeIpMapEntry row .1.3.6.1.4.1.9.10.146.1.2.1

An entry in this table represents a mapping of
Global_Node_ID with the local identifier.

An entry in this table is created automatically when
the Local identifier is associated with Global_ID and
Node_Id in…

Indexes

cmplsNodeIpMapGlobalId cmplsNodeIpMapNodeId

Column	Syntax	OID
cmplsNodeIpMapGlobalId This object indicates the Global_ID.	CISCO-MPLS-TC-EXT-STD-MIBCMplsGlobalId Type Constraints: range: 4	.1.3.6.1.4.1.9.10.146.1.2.1.1
cmplsNodeIpMapNodeId This object indicates the Node_ID within the operator.	CISCO-MPLS-TC-EXT-STD-MIBCMplsNodeId	.1.3.6.1.4.1.9.10.146.1.2.1.2
cmplsNodeIpMapLocalId This object contains an IP compatible local identifier which is defined in mplsNodeConfigTable.	CISCO-MPLS-TC-EXT-STD-MIBCMplsLocalId Type Constraints: range: 1..16777215	.1.3.6.1.4.1.9.10.146.1.2.1.3

This read-only table allows the administrator to retrieve
the local identifier for a given ICC operator in an ICC
operator environment.
          
This table MAY be used in on-demand and/or proactive
OAM operations to get the Ingress/Egress LSR
identifier (Local Identifier) from Src-ICC
or Dst-ICC and the Ingress and Egress LSR
identifiers are used to retrieve the tunnel entry.
This table returns nothing when the associated entry
is not defined in mplsNodeConfigTable.

cmplsNodeIccMapEntry row .1.3.6.1.4.1.9.10.146.1.3.1

An entry in this table represents a mapping of ICC with
the local identifier.

An entry in this table is created automatically when
the Local identifier is associated with ICC in
the mplsNodeConfigTable.

Indexes

cmplsNodeIccMapIccId

Column	Syntax	OID
cmplsNodeIccMapIccId This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress or Egress LSR ID. The ICC is a string of one to six characters, each character…	CISCO-MPLS-TC-EXT-STD-MIBCMplsIccId Type Constraints: range: 1..6	.1.3.6.1.4.1.9.10.146.1.3.1.1
cmplsNodeIccMapLocalId This object contains an ICC based local identifier which is defined in mplsNodeConfigTable.	CISCO-MPLS-TC-EXT-STD-MIBCMplsLocalId Type Constraints: range: 1..16777215	.1.3.6.1.4.1.9.10.146.1.3.1.2

This table represents MPLS-TP specific extensions to
mplsTunnelTable.
          
As per MPLS-TP Identifiers [RFC6370], LSP_ID for IP based
co-routed bidirectional tunnel,
          
A1-{Global_ID::Node_ID::Tunnel_Num}::Z9-{Global_ID::
Node_ID::Tunnel_Num}::LSP_Num
          
LSP_ID for IP based associated bidirectional tunnel,
A1-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}::
Z9-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}
          
mplsTunnelTable is reused for forming the LSP_ID
as follows,
          
Source Tunnel_Num is mapped with mplsTunnelIndex,
Source Node_ID is mapped with
mplsTunnelIngressLSRId, Destination Node_ID is
mapped with mplsTunnelEgressLSRId LSP_Num is mapped with
mplsTunnelInstance.
          
Source Global_Node_ID and/or ICC and Destination
Global_Node_ID and/or ICC are maintained in the
mplsNodeConfigTable and mplsNodeConfigLocalId is
used to create an entry in mplsTunnelTable.

cmplsTunnelExtEntry row .1.3.6.1.4.1.9.10.146.1.4.1

An entry in this table represents MPLS-TP
specific additional tunnel configurations.

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId

Column	Syntax	OID
cmplsTunnelOppositeDirPtr This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object holds the opposite direction tunnel entry if t…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.10.146.1.4.1.1
cmplsTunnelExtOppositeDirTnlValid Denotes whether or not this tunnel uses mplsTunnelOppositeDirPtr for identifying the opposite direction tunnel information. Note that if this variable is set to true then the mplsTunnelOppositeDirPtr should point to the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.146.1.4.1.2
cmplsTunnelExtDestTnlIndex This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object holds the same value as that of the mplsTunnel…	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.146.1.4.1.3
cmplsTunnelExtDestTnlLspIndex This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object should contain different value if both the for…	MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.146.1.4.1.4
cmplsTunnelExtDestTnlValid Denotes whether or not this tunnel uses mplsTunnelExtDestTnlIndex and mplsTunnelExtDestTnlLspIndex for identifying the opposite direction tunnel information. Note that if this variable is set to true then the mplsTunnel…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.146.1.4.1.5

This table extends the mplsTunnelTable to provide
per-tunnel packet performance information for the reverse
direction of a bidirectional tunnel.  It can be seen as
supplementing the mplsTunnelPerfTable, which augments the
mplsTunnelTable.
          
For links that do not transport packets, these packet
counters cannot be maintained.  For such links, attempts
to read the objects in this table will return
noSuchInstance.

cmplsTunnelReversePerfEntry row .1.3.6.1.4.1.9.10.146.1.5.1

An entry in this table is created by the LSR for every
bidirectional MPLS tunnel where packets are visible to the
LSR.

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId

Column	Syntax	OID
cmplsTunnelReversePerfPackets Number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part of the 64-bit value if both mplsTunnelRever…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.146.1.5.1.1
cmplsTunnelReversePerfHCPackets High-capacity counter for number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.146.1.5.1.2
cmplsTunnelReversePerfErrors Number of errored packets received on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For such links, this value will retu…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.146.1.5.1.3
cmplsTunnelReversePerfBytes Number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part of the 64-bit value if both mplsTunnelReverse…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.146.1.5.1.4
cmplsTunnelReversePerfHCBytes High-capacity counter for number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For s…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.146.1.5.1.5