CISCO-IETF-MPLS-TE-EXT-STD-03-MIB

        Copyright (c) 2012 IETF Trust and the persons identified
as the document authors.  All rights reserved.
This MIB module contains generic object definitions for
MPLS Traffic Engineering in transport networks.This module is a
cisco-ized version of the IETF draft:
draft-ietf-mpls-tp-te-mib-03
    
Source file
CISCO-IETF-MPLS-TE-EXT-STD-03-MIB
Last revised
Identity
cmplsTeExtStdMIB
Base OID
1.3.6.1.4.1.9.10.146
Imported Objects
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-MPLS-TE-EXT-STD-03-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-MPLS-TE-EXT-STD-03-MIB::cmplsTeExtStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-MPLS-TE-EXT-STD-03-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MPLS-TE-EXT-STD-03-MIB::cmplsTeExtStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (37)
.1.3.6.1.4.1.9.10.146
.1.3.6.1.4.1.9.10.146.0
.1.3.6.1.4.1.9.10.146.1
.1.3.6.1.4.1.9.10.146.1.1
.1.3.6.1.4.1.9.10.146.1.1.1
.1.3.6.1.4.1.9.10.146.1.1.1.1
.1.3.6.1.4.1.9.10.146.1.1.1.2
.1.3.6.1.4.1.9.10.146.1.1.1.3
.1.3.6.1.4.1.9.10.146.1.1.1.4
.1.3.6.1.4.1.9.10.146.1.1.1.5
.1.3.6.1.4.1.9.10.146.1.1.1.6
.1.3.6.1.4.1.9.10.146.1.2
.1.3.6.1.4.1.9.10.146.1.2.1
.1.3.6.1.4.1.9.10.146.1.2.1.1
.1.3.6.1.4.1.9.10.146.1.2.1.2
.1.3.6.1.4.1.9.10.146.1.2.1.3
.1.3.6.1.4.1.9.10.146.1.3
.1.3.6.1.4.1.9.10.146.1.3.1
.1.3.6.1.4.1.9.10.146.1.3.1.1
.1.3.6.1.4.1.9.10.146.1.3.1.2
.1.3.6.1.4.1.9.10.146.1.4
.1.3.6.1.4.1.9.10.146.1.4.1
.1.3.6.1.4.1.9.10.146.1.4.1.1
.1.3.6.1.4.1.9.10.146.1.4.1.2
.1.3.6.1.4.1.9.10.146.1.4.1.3
.1.3.6.1.4.1.9.10.146.1.4.1.4
.1.3.6.1.4.1.9.10.146.1.4.1.5
.1.3.6.1.4.1.9.10.146.1.5
.1.3.6.1.4.1.9.10.146.1.5.1
.1.3.6.1.4.1.9.10.146.1.5.1.1
.1.3.6.1.4.1.9.10.146.1.5.1.2
.1.3.6.1.4.1.9.10.146.1.5.1.3
.1.3.6.1.4.1.9.10.146.1.5.1.4
.1.3.6.1.4.1.9.10.146.1.5.1.5
.1.3.6.1.4.1.9.10.146.2
.1.3.6.1.4.1.9.10.146.2.1
.1.3.6.1.4.1.9.10.146.2.2
Dependencies (15) 7 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.146.2.2.1
Compliance statement for agents that provide full
support the MPLS-TE-EXT-STD-MIB module.
Required groups
mandatory cmplsTunnelExtGroup
optional cmplsTunnelExtIpOperatorGroup This group is mandatory for devices which support
configuration of IP based identifier tunnels.
optional cmplsTunnelExtIccOperatorGroup This group is mandatory for devices which support
configuration of ICC based tunnels.

OID .1.3.6.1.4.1.9.10.146.2.2.2
Compliance statement for agents that provide full
support the MPLS-TE-EXT-STD-MIB module.
Required groups
mandatory cmplsTunnelExtGroup
optional cmplsTunnelExtIpOperatorGroup This group is mandatory for devices which support
configuration of IP based identifier tunnels.
optional cmplsTunnelExtIccOperatorGroup This group is mandatory for devices which support
configuration of ICC based tunnels.