CISCO-IETF-FRR-MIB Table View

This table shows detour setup constraints.

cmplsFrrConstEntry row .1.3.6.1.4.1.9.10.98.2.1.1.1

An entry in this table represents detour LSP or bypass tunnel
setup constraints for a tunnel instance to be protected by
detour LSPs or a tunnel. Agents must allow entries in this table
to be created only for tunnel …

Indexes

cmplsFrrConstIfIndex cmplsFrrConstTunnelIndex cmplsFrrConstTunnelInstance

Column	Syntax	OID
cmplsFrrConstIfIndex Uniquely identifies an interface for which fast reroute is configured. Tabular entries indexed with a 0 value apply to all interfaces on this device for which the FRR feature can operate on.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.98.2.1.1.1.1
cmplsFrrConstTunnelIndex Uniquely identifies a tunnel for which fast reroute is requested.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.98.2.1.1.1.2
cmplsFrrConstTunnelInstance Uniquely identifies an instance of this tunnel for which fast reroute is requested.	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.3
cmplsFrrConstSetupPrio Indicates the setup priority of detour LSP.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.10.98.2.1.1.1.4
cmplsFrrConstHoldingPrio Indicates the holding priority for detour LSP.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.10.98.2.1.1.1.5
cmplsFrrConstInclAnyAffinity A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common.	MPLS-TC-STD-MIBMplsTunnelAffinityr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.6
cmplsFrrConstInclAllAffinity A link satisfies the include-all constraint if and only if the link contains all of the administrative groups specified in the constraint.	MPLS-TC-STD-MIBMplsTunnelAffinityr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.7
cmplsFrrConstExclAllAffinity A link satisfies the exclude-all constraint if and only if the link contains none of the administrative groups specified in the constraint.	MPLS-TC-STD-MIBMplsTunnelAffinityr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.8
cmplsFrrConstHopLimit The maximum number of hops that the detour LSP may traverse.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.98.2.1.1.1.9
cmplsFrrConstBandwidth This variable represents the bandwidth for detour LSPs of this tunnel, in units of thousands of bits per second (Kbps).	MPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.10
cmplsFrrConstRowStatus This object is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.98.2.1.1.1.11
cmplsFrrConstNumProtectingTunOnIf The number of backup tunnels protecting the specified interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.12
cmplsFrrConstNumProtectedTunOnIf The number of tunnels protected on this interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.1.1.13

The fast reroute log table records fast reroute events such
as protected links going up or down or the FRR feature
kicking in.

cmplsFrrLogEntry row .1.3.6.1.4.1.9.10.98.2.1.2.1

An entry in this table is created to describe one fast
reroute event. Entries in this table are only created and
destroyed by the agent implementation. The maximum number
of entries in this log is governed by the scal…

Indexes

cmplsFrrLogIndex

Column	Syntax	OID
cmplsFrrLogIndex Uniquely identifies a fast reroute event entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.2.1.1
cmplsFrrLogEventTime This object provides the amount of time ticks since this event occured.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.98.2.1.2.1.2
cmplsFrrLogInterface This object indicates which interface was affected by this FRR event. This value may be set to 0 if mplsFrrConstProtectionMethod is set to oneToOneBackup(0).	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.98.2.1.2.1.3
cmplsFrrLogEventType This object describes what type of fast reroute event occured.	Enumeration Enumerated Values: 1 other 2 protected	.1.3.6.1.4.1.9.10.98.2.1.2.1.4
cmplsFrrLogEventDuration This object describes the duration of this event.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.1.2.1.5
cmplsFrrLogEventReasonString This object contains an implementation-specific explanation of the event.	OctetString Constraints: range: 128-128	.1.3.6.1.4.1.9.10.98.2.1.2.1.6

The mplsFrrFacRouteDBTable provides information about the 
fast reroute database.  Each entry belongs to an interface,
protecting backup tunnel and protected tunnel. MPLS 
interfaces defined on this node are protected by backup
tunnels and are indexed by mplsFrrFacRouteProtectedIndex.
Backup tunnels defined to protect the tunnels traversing an
interface, and are indexed by 
mplsFrrFacRouteProtectingTunIndex.  Note that the tunnel 
instance index is not required, since it is implied to be 0, 
which indicates the tunnel head interface for the protecting 
tunnel. The protecting tunnel is defined to exist on the PLR 
in the FRR specification.  Protected tunnels are the LSPs that 
traverse the protected link.  These LSPs are uniquely 
identified by mplsFrrFacRouteProtectedTunIndex,
mplsFrrFacRouteProtectedTunInstance, 
mplsFrrFacRouteProtectedTunIngressLSRId, and 
mplsFrrFacRouteProtectedTunEgressLSRId.

cmplsFrrFacRouteDBEntry row .1.3.6.1.4.1.9.10.98.2.3.1.1

An entry in the mplsFrrDBTable represents a single protected
LSP, protected by a backup tunnel and defined for a specific
protected interface. Note that for brevity, managers should
consult the mplsTunnelTable present i…

Indexes

cmplsFrrFacRouteProtectedIfIndex cmplsFrrFacRouteProtectingTunIndex cmplsFrrFacRouteProtectedTunIndex cmplsFrrFacRouteProtectedTunInstance cmplsFrrFacRouteProtectedTunIngressLSRId cmplsFrrFacRouteProtectedTunEgressLSRId

Column	Syntax	OID
cmplsFrrFacRouteProtectedIfIndex Uniquely identifies the interface configured for FRR protection.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.10.98.2.3.1.1.1
cmplsFrrFacRouteProtectingTunIndex Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacRouteIfProtectedIndex (and all of the tunnels using this interface).	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.98.2.3.1.1.2
cmplsFrrFacRouteProtectedTunIndex Uniquely identifies an mplsTunnelEntry that is being protected by FRR.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.98.2.3.1.1.3
cmplsFrrFacRouteProtectedTunInstance Uniquely identifies an mplsTunnelEntry that is being protected by FRR.	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.3.1.1.4
cmplsFrrFacRouteProtectedTunIngressLSRId Uniquely identifies an mplsTunnelEntry that is being protected by FRR.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.9.10.98.2.3.1.1.5
cmplsFrrFacRouteProtectedTunEgressLSRId Uniquely identifies an mplsTunnelEntry that is being protected by FRR.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.9.10.98.2.3.1.1.6
cmplsFrrFacRouteProtectedTunStatus Specifies the state of the protected tunnel. active This tunnel's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - This…	Enumeration Enumerated Values: 1 active 2 ready 3 partial	.1.3.6.1.4.1.9.10.98.2.3.1.1.7
cmplsFrrFacRouteProtectingTunResvBw Specifies the amount of bandwidth in megabytes per second that is actually reserved by the backup tunnel for facility backup. This value is repeated here from the MPLS- TE MIB because the tunnel entry will reveal the ba…	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.98.2.3.1.1.8
cmplsFrrFacRouteProtectingTunProtectionType Indicates type of the resource protection.	Enumerationr/w Enumerated Values: 0 linkProtection 1 nodeProtection	.1.3.6.1.4.1.9.10.98.2.3.1.1.9