CISCO-IETF-FRR-MIB

        This MIB module contains managed object definitions for MPLS
Fast Reroute (FRR) as defined in:Pan, P., Gan, D., Swallow, G.,
Vasseur, J.Ph., Cooper, D., Atlas, A., Jork, M., Fast Reroute
Techniques in RSVP-TE, draft-ietf-mpls-rsvp-lsp-fastreroute-
00.txt, January 2002.
    
Source file
CISCO-IETF-FRR-MIB
Last revised
Identity
cmplsFrrMIB
Base OID
1.3.6.1.4.1.9.10.98
Imported Objects
CISCO-SMI ciscoExperiment
IF-MIB InterfaceIndex InterfaceIndexOrZero
MPLS-TC-STD-MIB MplsBitRate MplsLsrIdentifier MplsTunnelAffinity MplsTunnelIndex MplsTunnelInstanceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-FRR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-FRR-MIB::cmplsFrrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-FRR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-FRR-MIB::cmplsFrrMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (58)
.1.3.6.1.4.1.9.10.98
.1.3.6.1.4.1.9.10.98.0
.1.3.6.1.4.1.9.10.98.1
.1.3.6.1.4.1.9.10.98.1.1
Enumeration
.1.3.6.1.4.1.9.10.98.1.10
.1.3.6.1.4.1.9.10.98.1.11
.1.3.6.1.4.1.9.10.98.1.12
.1.3.6.1.4.1.9.10.98.1.13
.1.3.6.1.4.1.9.10.98.1.14
.1.3.6.1.4.1.9.10.98.1.2
.1.3.6.1.4.1.9.10.98.1.3
.1.3.6.1.4.1.9.10.98.1.4
.1.3.6.1.4.1.9.10.98.1.5
.1.3.6.1.4.1.9.10.98.1.6
.1.3.6.1.4.1.9.10.98.1.7
.1.3.6.1.4.1.9.10.98.1.8
.1.3.6.1.4.1.9.10.98.1.9
.1.3.6.1.4.1.9.10.98.2
.1.3.6.1.4.1.9.10.98.2.1
.1.3.6.1.4.1.9.10.98.2.1.1
.1.3.6.1.4.1.9.10.98.2.1.1.1
.1.3.6.1.4.1.9.10.98.2.1.1.1.1
.1.3.6.1.4.1.9.10.98.2.1.1.1.10
.1.3.6.1.4.1.9.10.98.2.1.1.1.11
.1.3.6.1.4.1.9.10.98.2.1.1.1.12
.1.3.6.1.4.1.9.10.98.2.1.1.1.13
.1.3.6.1.4.1.9.10.98.2.1.1.1.2
.1.3.6.1.4.1.9.10.98.2.1.1.1.3
Unsigned32
.1.3.6.1.4.1.9.10.98.2.1.1.1.4
Unsigned32
.1.3.6.1.4.1.9.10.98.2.1.1.1.5
.1.3.6.1.4.1.9.10.98.2.1.1.1.6
.1.3.6.1.4.1.9.10.98.2.1.1.1.7
.1.3.6.1.4.1.9.10.98.2.1.1.1.8
Unsigned32
.1.3.6.1.4.1.9.10.98.2.1.1.1.9
.1.3.6.1.4.1.9.10.98.2.1.2
.1.3.6.1.4.1.9.10.98.2.1.2.1
.1.3.6.1.4.1.9.10.98.2.1.2.1.1
.1.3.6.1.4.1.9.10.98.2.1.2.1.2
.1.3.6.1.4.1.9.10.98.2.1.2.1.3
Enumeration
.1.3.6.1.4.1.9.10.98.2.1.2.1.4
.1.3.6.1.4.1.9.10.98.2.1.2.1.5
OctetString
.1.3.6.1.4.1.9.10.98.2.1.2.1.6
.1.3.6.1.4.1.9.10.98.2.2
.1.3.6.1.4.1.9.10.98.2.3
.1.3.6.1.4.1.9.10.98.2.3.1
.1.3.6.1.4.1.9.10.98.2.3.1.1
.1.3.6.1.4.1.9.10.98.2.3.1.1.1
.1.3.6.1.4.1.9.10.98.2.3.1.1.2
.1.3.6.1.4.1.9.10.98.2.3.1.1.3
.1.3.6.1.4.1.9.10.98.2.3.1.1.4
.1.3.6.1.4.1.9.10.98.2.3.1.1.5
.1.3.6.1.4.1.9.10.98.2.3.1.1.6
Enumeration
.1.3.6.1.4.1.9.10.98.2.3.1.1.7
.1.3.6.1.4.1.9.10.98.2.3.1.1.8
Enumeration
.1.3.6.1.4.1.9.10.98.2.3.1.1.9
.1.3.6.1.4.1.9.10.98.3
.1.3.6.1.4.1.9.10.98.3.1
.1.3.6.1.4.1.9.10.98.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. MPLS-TC-STD-MIBrfc
  9. CISCO-IETF-FRR-MIBciscoselected
Type Definitions (1)
Integer32 range: 1..65535
Conformance Groups (6)
Objects that are required to gather fast reroute statistics.
.1.3.6.1.4.1.9.10.98.3.1.1
Objects that are required to configure fast reroute constraints
at the ingress LSR of the tunnel that requires fast reroute
service.
.1.3.6.1.4.1.9.10.98.3.1.2
Objects that are required to represent FRR logging information
at the detour ingress, transit and egress LSRs.
.1.3.6.1.4.1.9.10.98.3.1.4
Objects that are required to represent the FRR
Facility Route Database information.
.1.3.6.1.4.1.9.10.98.3.1.6
Objects that are required to represent FRR notifications.
.1.3.6.1.4.1.9.10.98.3.1.7
Objects that are required to represent FRR notifications.
.1.3.6.1.4.1.9.10.98.3.1.8
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.98.3.2.1
Compliance statements for agents that support the MPLS FRR
MIB.
Required groups
mandatory cmplsFrrScalarGroup
mandatory cmplsFrrConstGroup
mandatory cmplsFrrLogGroup
optional cmplsFrrFacRouteDBGroup This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not.
optional cmplsFrrNotifGroup This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not.
Object refinements
ObjectAccessSyntaxDescription
cmplsFrrConstSetupPrio readonly
Write access is not required.
cmplsFrrConstHoldingPrio readonly
Write access is not required.
cmplsFrrConstInclAnyAffinity readonly
Write access is not required.
cmplsFrrConstInclAllAffinity readonly
Write access is not required.
cmplsFrrConstExclAllAffinity readonly
Write access is not required.
cmplsFrrConstHopLimit readonly
Write access is not required.
cmplsFrrConstBandwidth readonly
Write access is not required.
cmplsFrrConstRowStatus readonly
Write access is not required.
cmplsFrrConstNumProtectingTunOnIf readonly
Write access is not required.
cmplsFrrConstNumProtectedTunOnIf readonly
Write access is not required.

OID .1.3.6.1.4.1.9.10.98.3.2.2
Compliance statements for agents that support the MPLS FRR
MIB.
Required groups
mandatory cmplsFrrScalarGroup
mandatory cmplsFrrConstGroup
mandatory cmplsFrrLogGroup
optional cmplsFrrFacRouteDBGroup This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not.
optional cmplsFrrNotifGroupRev1 This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not.
Object refinements
ObjectAccessSyntaxDescription
cmplsFrrConstSetupPrio readonly
Write access is not required.
cmplsFrrConstHoldingPrio readonly
Write access is not required.
cmplsFrrConstInclAnyAffinity readonly
Write access is not required.
cmplsFrrConstInclAllAffinity readonly
Write access is not required.
cmplsFrrConstExclAllAffinity readonly
Write access is not required.
cmplsFrrConstHopLimit readonly
Write access is not required.
cmplsFrrConstBandwidth readonly
Write access is not required.
cmplsFrrConstRowStatus readonly
Write access is not required.
cmplsFrrConstNumProtectingTunOnIf readonly
Write access is not required.
cmplsFrrConstNumProtectedTunOnIf readonly
Write access is not required.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.9.10.98.0.1
This notification is generated when a tunnel running over an
interface as specified in the mplsFrrConstTable is initially
protected by the backup tunnel also specified in the
cmplsFrrConstTable. This notification should not be generated
for each subsequent tunnel that is backed up by the FRR feature
on this LSR, as this may result in potential scaling issues
with regard to LSR performance and network loading. Note also
that notifications MUST be generated in accordance with the
cmplsFrrNotifMaxRate.
.1.3.6.1.4.1.9.10.98.0.2
This notification is generated when the final tunnel that is
being protected by a backup tunnel as specified in the
cmplsFrrConstTable is restored to normal operation. This
notification should not be generated for each restored tunnel,
as this may result in potential scaling issues with regard to
LSR performance and network loading. Note also that
notifications MUST be generated in accordance with the
cmplsFrrNotifMaxRate.