CISCO-FLOW-MONITOR-MIB Table View

This table lists the flow monitors contained by the device.

cfmFlowMonitorEntry row .1.3.6.1.4.1.9.9.692.1.1.1.1

An entry describes a flow monitor, which represents a hardware
or software entity that classifies traffic flows, monitors flow
data, and periodically computes flow metrics.

A simple device may only support …

Indexes

cfmFlowMonitorId

Column	Syntax	OID
cfmFlowMonitorId This object indicates an arbitrary integer-value that uniquely identifies the flow monitor. Observe that the value assigned to a flow monitor does not necessarily persist across restarts or the removal-insertion of a p…	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.1
cfmFlowMonitorDescr This object indicates a human-readable description for the flow monitor.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.1.1.1.2
cfmFlowMonitorCaps This object indicates the capabilities of the flow monitor. Specifically, the value of this column indicates a '1' for each set of flow metrics the flow monitor is capable of measuring.	CISCO-FLOW-MONITOR-TC-MIBFlowMetrics Type Values: 0 mdi 1 rtp 2 ipCbr	.1.3.6.1.4.1.9.9.692.1.1.1.1.3
cfmFlowMonitorFlowCount This object indicates the number of traffic flows currently monitored by the flow monitor.	traffic flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.4
cfmFlowMonitorConditionsProfile This object indicates the conditions profile that contains the descriptions of the standing conditions monitored for the flow monitor. If the flow monitor does not have an associated conditions profile, t…	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionsProfileOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.5
cfmFlowMonitorConditions This object indicates the current standing conditions for the flow monitor. If the flow monitor does not have an associated conditions profile, then the value of this column must be the null string.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.1.1.1.6
cfmFlowMonitorAlarms This object indicates the current alarm conditions for the flow monitor. If the flow monitor does not have an associated conditions profile, then the value of this column must be the null string.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.1.1.1.7
cfmFlowMonitorAlarmSeverity This object indicates the high severity alarm condition currently raised by the flow monitor and the traffic flows monitored by the flow monitor. If no alarm is raised for the flow monitor and the traffic…	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.692.1.1.1.1.8
cfmFlowMonitorAlarmCriticalCount This object indicates the number of alarm conditions with a critical severity currently raised for traffic flows monitored by the flow monitor.	alarmsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.9
cfmFlowMonitorAlarmMajorCount This object indicates the number of alarm conditions with a major severity currently raised for traffic flows monitored by the flow monitor.	alarmsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.10
cfmFlowMonitorAlarmMinorCount This object indicates the number of alarm conditions with a minor severity currently raised for traffic flows monitored by the flow monitor.	alarmsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.11
cfmFlowMonitorAlarmWarningCount This object indicates the number of alarm conditions with a warning severity currently raised for traffic flows monitored by the flow monitor.	alarmsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.12
cfmFlowMonitorAlarmInfoCount This object indicates the number of alarm conditions with a informational severity currently raised for traffic flows monitored by the flow monitor.	alarmsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.1.1.1.13

This table lists the traffic flows monitored by each flow
monitor supported by the device.
          
This table has an expansion dependent relationship on the
cfmFlowMonitorTable, containing zero or more rows for each flow
monitor.

cfmFlowEntry row .1.3.6.1.4.1.9.9.692.1.2.1.1

An entry describes a traffic flow monitored by a flow monitor.

The device creates a row in the cfmFlowTable when a flow monitor
starts monitoring a traffic flow. Likewise, the device
destroys a row in the …

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowId This object indicates an arbitrary integer-value that uniquely identifies a traffic flow in the scope of the flow monitor that learned it. Observe that the value assigned to a flow does not necessarily persist across r…	CISCO-FLOW-MONITOR-TC-MIBFlowIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.2.1.1.1
cfmFlowDescr This object indicates a human-readable description of the traffic flow.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.2.1.1.2
cfmFlowNext This object indicates a reference to a row in another table containing additional data relating to the traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.1.1.3
cfmFlowCreateTime This object indicates the value of sysUpTime when the row was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.692.1.2.1.1.4
cfmFlowDiscontinuityTime This object indicates the value of sysUpTime on the most recent occasion at which any one or more of counters associated with the traffic flow suffered a discontinuity (e.g., process restart or failover event).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.692.1.2.1.1.5
cfmFlowExpirationTime This object indicates the expiration interval for the traffic flow. If the flow monitor receives no packets for the traffic flow in this interval, then it expires the flow; that is, it stops monitoring the traffic and …	secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.692.1.2.1.1.6
cfmFlowDirection This object indicates the direction of the traffic flow where the flow monitor collects data: 'unknown' The SNMP entity does not know the direction of the traffic flow at the point the…	Enumeration Enumerated Values: 1 unknown 2 ingress 3 egress	.1.3.6.1.4.1.9.9.692.1.2.1.1.7
cfmFlowAdminStatus This object specifies the desired state of the traffic flow: 'enabled' The corresponding flow monitor is collecting data and computing metrics for the traffic flow. 'disabled' T…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 expire	.1.3.6.1.4.1.9.9.692.1.2.1.1.8
cfmFlowOperStatus This object indicates the operational state of the traffic flow: 'enabled' The corresponding flow monitor is actively monitoring the traffic flow. 'disabled' …	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.9.692.1.2.1.1.9
cfmFlowIngressType This object indicates the type of port that receives the traffic for this traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowPointType Type Values: 1 other 2 unknown 3 none 4 interface 5 dot1qVlan	.1.3.6.1.4.1.9.9.692.1.2.1.1.10
cfmFlowIngress This object identifies the port that receives the traffic for this traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowPointIdentifier Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.2.1.1.11
cfmFlowEgressType This object indicates the type of port that transmits the traffic for this traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowPointType Type Values: 1 other 2 unknown 3 none 4 interface 5 dot1qVlan	.1.3.6.1.4.1.9.9.692.1.2.1.1.12
cfmFlowEgress This object identifies the port that transmits the traffic for this traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowPointIdentifier Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.2.1.1.13

This table contains additional data relating to the L2 VLAN
carrying traffic flows monitored by flow monitors.
          
This table has a sparse dependent relationship on the
cfmFlowTable.

cfmFlowL2VlanEntry row .1.3.6.1.4.1.9.9.692.1.2.3.1

An entry describes data relating to the L2 VLAN carrying the
corresponding traffic flow.

A device creates a row in the cfmFlowL2VlanTable when a flow
monitor has data relating to the L2 VLAN carrying a
corr…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowL2VlanNext This object indicates a reference to a row in another table containing additional data relating to the corresponding traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.3.1.1
cfmFlowL2VlanId This object indicates the tag associated with the VLAN carrying the corresponding traffic flow.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.692.1.2.3.1.2
cfmFlowL2VlanCos This object indicates the layer 2 COS assigned to the corresponding traffic flow.	CISCO-TCLayer2Cos Type Constraints: range: 0..7	.1.3.6.1.4.1.9.9.692.1.2.3.1.3

This table contains additional data relating to the IP carrying
the corresponding traffic flow.
          
This table has a sparse dependent relationship on the
cfmFlowTable.

cfmFlowIpEntry row .1.3.6.1.4.1.9.9.692.1.2.5.1

An entry describes data relating to the IP carrying the
corresponding traffic flow.

A device creates a row in the cfmFlowIpTable when the flow
monitor has data relating to the IP carrying the corresponding
…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowIpNext This object indicates a reference to a row in another table containing additional data relating to the corresponding traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.5.1.1
cfmFlowIpAddrType This object indicates the type of IP address indicated by the corresponding instances of cfmFlowIpAddrSrc and cfmFlowIpAddrDst.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.692.1.2.5.1.2
cfmFlowIpAddrSrc This object indicates the source IP address of the corresponding traffic flow.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.2.5.1.3
cfmFlowIpAddrDst This object indicates the destination IP address of the corresponding traffic flow.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.2.5.1.4
cfmFlowIpValid This object indicates whether the corresponding instances of cfmFlowIpTrafficClass and cfmFlowIpHopLimit are valid.	Bits Enumerated Values: 0 trafficClass 1 hopLimit	.1.3.6.1.4.1.9.9.692.1.2.5.1.5
cfmFlowIpTrafficClass This object indicates the traffic class of the corresponding traffic flow. If version 4 of the IP carries the traffic flow, then the value of this column corresponds to the 'Type of Service' field of the …	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.692.1.2.5.1.6
cfmFlowIpHopLimit This object indicates the hop limit of the corresponding traffic flow. If version 4 of the IP carries the traffic flow, then the value of this column corresponds to the 'Time to Live' field of the IP head…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.692.1.2.5.1.7

This table contains additional data relating to the UDP
carrying the corresponding traffic flow.
          
This table has a sparse dependent relationship on the
cfmFlowTable.

cfmFlowUdpEntry row .1.3.6.1.4.1.9.9.692.1.2.7.1

An entry describes data relating to the UDP carrying the
corresponding traffic flow.

A device creates a row in the cfmFlowUdpTable when the flow
monitor has data relating to the UDP carrying the correspondi…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowUdpNext This object indicates a reference to a row in another table containing additional data relating to the corresponding traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.7.1.1
cfmFlowUdpPortSrc This object indicates the source UDP port number of the corresponding traffic flow.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.692.1.2.7.1.2
cfmFlowUdpPortDst This object indicates the destination UDP port number of the corresponding traffic flow.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.692.1.2.7.1.3

This table contains additional data relating to the TCP
carrying the corresponding traffic flow.
          
This table has a sparse dependent relationship on the
cfmFlowTable.

cfmFlowTcpEntry row .1.3.6.1.4.1.9.9.692.1.2.9.1

An entry describes data relating to the TCP carrying the
corresponding traffic flow.

A device creates a row in the cfmFlowTcpTable when the flow
monitor has data relating to the TCP carrying the correspondi…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowTcpNext This object indicates a reference to a row in another table containing additional data relating to the corresponding traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.9.1.1
cfmFlowTcpPortSrc This object indicates the source TCP port number of the corresponding traffic flow.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.692.1.2.9.1.2
cfmFlowTcpPortDst This object indicates the destination TCP port number of the corresponding traffic flow.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.692.1.2.9.1.3

This table contains additional data relating to the RTP
carrying the corresponding traffic flow.
          
This table has a sparse dependent relationship on the
cfmFlowTable.

cfmFlowRtpEntry row .1.3.6.1.4.1.9.9.692.1.2.11.1

An entry describes data relating to the RTP carrying the
corresponding traffic flow.

A device creates a row in the cfmFlowRtpTable when the flow
monitor has data relating to the RTP carrying the correspondi…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowRtpNext This object indicates a reference to a row in another table containing additional data relating to the corresponding traffic flow.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.2.11.1.1
cfmFlowRtpVersion This object indicates the RTP version of the corresponding traffic flow.	Unsigned32 Constraints: range: 0-3	.1.3.6.1.4.1.9.9.692.1.2.11.1.2
cfmFlowRtpSsrc This object indicates the RTP synchronized source (SSRC) of the corresponding traffic flow.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.692.1.2.11.1.3
cfmFlowRtpPayloadType This object indicates the RTP payload type of the corresponding traffic flow.	Unsigned32 Constraints: range: 0-127	.1.3.6.1.4.1.9.9.692.1.2.11.1.4

This table contains aggregate metrics and data relating to the
collection of metrics for the traffic flows monitored by each of
the flow monitors supported by the device.
          
This table has a sparse dependent relationship on the
cfmFlowTable, containing a row for each row in the cfmFlowTable
for which the device is actively monitoring.

cfmFlowMetricsEntry row .1.3.6.1.4.1.9.9.692.1.3.1.1

An entry contains aggregate metrics and data relating to the
collection of metrics for a corresponding traffic flow.

The device creates a row in the cfmFlowMetricsTable when a flow
monitor starts monitoring…

Indexes

cfmFlowMonitorId cfmFlowId

Column	Syntax	OID
cfmFlowMetricsCollected This object indicates the metrics collected by the corresponding flow monitor for the corresponding traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowMetrics Type Values: 0 mdi 1 rtp 2 ipCbr	.1.3.6.1.4.1.9.9.692.1.3.1.1.1
cfmFlowMetricsIntervalTime This object indicates the length of the measurement interval for the corresponding traffic flow. The flow monitor computes the collected metrics for the corresponding traffic flow with a frequency equal to the inverse …	secondsUnsigned32 Constraints: range: 1-3600	.1.3.6.1.4.1.9.9.692.1.3.1.1.2
cfmFlowMetricsMaxIntervals This object indicates the maximum number of measurement intervals for which the corresponding flow monitor maintains metrics for the corresponding traffic flow. If the value of this column is '0', then th…	intervalsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.3
cfmFlowMetricsElapsedTime This object indicates the time that has elapsed since the beginning of the current measurement interval.	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.4
cfmFlowMetricsIntervals This object indicates the number of measurement intervals for which data has been collected.	intervalsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.5
cfmFlowMetricsInvalidIntervals This object indicates the number of measurement intervals in the set of collected measurement intervals that contain invalid data.	intervalsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.6
cfmFlowMetricsConditionsProfile This object indicates the conditions profile that contains the descriptions of the standing conditions monitored for the traffic flow. If the flow does not have an associated conditions profile, then the …	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionsProfileOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.7
cfmFlowMetricsConditions This object indicates the current standing conditions for the corresponding traffic flow. If the flow does not have an associated conditions profile, then the value of this column must be the null string.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.3.1.1.8
cfmFlowMetricsAlarms This object indicates the current alarm conditions for the corresponding traffic flow. If the flow does not have an associated conditions profile, then the value of this column must be the null string.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.3.1.1.9
cfmFlowMetricsAlarmSeverity This object indicates the highest severity alarm currently raised for the corresponding traffic flow. If no alarm is raised for the corresponding traffic flow, then the value of this column is 'cleared'.	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.692.1.3.1.1.10
cfmFlowMetricsPkts This object indicates the total number of packets processed by the corresponding flow monitor for the corresponding traffic flow.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.692.1.3.1.1.11
cfmFlowMetricsOctets This object indicates the total number of octets contained by the packets processed by the corresponding flow monitor for the corresponding traffic flow.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.692.1.3.1.1.12
cfmFlowMetricsBitRateUnits This object indicates the units for the corresponding instance of cfmFlowMetricsBitRate.	CISCO-FLOW-MONITOR-TC-MIBFlowBitRateUnits Type Values: 1 bps 2 kbps 3 mbps 4 gbps	.1.3.6.1.4.1.9.9.692.1.3.1.1.13
cfmFlowMetricsBitRate This object indicates the average bit rate at which the corresponding flow monitor is processing data for the corresponding traffic flow. This value is cumulative over the lifetime of the traffic flow.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.14
cfmFlowMetricsPktRate This object indicates the average packet rate at which the corresponding flow monitor is processing data for the corresponding traffic flow. This value is cumulative over the lifetime of the traffic flow.	packets per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.3.1.1.15

This table contains historic metrics for the traffic flows
monitored by each of the flow monitors supported by the device.
          
This table has an expansion dependent relationship on the
cfmFlowMetricsTable, containing zero or more rows for each
traffic flow.

cfmFlowMetricsIntEntry row .1.3.6.1.4.1.9.9.692.1.3.3.1

An entry describes metrics collected for a previous
measurement interval for a corresponding traffic flow.

Indexes

cfmFlowMonitorId cfmFlowId cfmFlowMetricsIntNumber

Column	Syntax	OID
cfmFlowMetricsIntNumber This object indicates the interval number identifying the measurement interval. The measurement interval identified by the value '1' represents the most recent measurement interval, and the interval identified by the v…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.692.1.3.3.1.1
cfmFlowMetricsIntValid This object indicates whether the data for the measurement interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.692.1.3.3.1.2
cfmFlowMetricsIntTime This object indicates the value of sysUpTime when the measurement interval was captured.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.692.1.3.3.1.3
cfmFlowMetricsIntConditions This object indicates which standing conditions were asserted at least once during the measurement interval for the corresponding traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.3.3.1.4
cfmFlowMetricsIntAlarms This object indicates which alarm conditions were raised at least once during the measurement interval for the corresponding traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditions Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.3.3.1.5
cfmFlowMetricsIntAlarmSeverity This object indicates the highest severity alarm raised during the measurement interval for the corresponding traffic flow. If no alarm was raised during the measurement interval for the corresponding tra…	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.692.1.3.3.1.6
cfmFlowMetricsIntPkts This object indicates the number of packets processed by the corresponding flow monitor for the corresponding traffic flow during the measurement interval.	packetsCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount	.1.3.6.1.4.1.9.9.692.1.3.3.1.7
cfmFlowMetricsIntOctets This object indicates the number of octets contained by the packets processed by the corresponding flow monitor for the corresponding traffic flow during the measurement interval.	octetsCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount	.1.3.6.1.4.1.9.9.692.1.3.3.1.8
cfmFlowMetricsIntBitRateUnits This object indicates the units for the corresponding instance of cfmFlowMetricsIntBitRate.	CISCO-FLOW-MONITOR-TC-MIBFlowBitRateUnits Type Values: 1 bps 2 kbps 3 mbps 4 gbps	.1.3.6.1.4.1.9.9.692.1.3.3.1.9
cfmFlowMetricsIntBitRate This object indicates the bit rate at which the corresponding flow monitor processed data for the corresponding traffic flow during the measurement interval.	CISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount	.1.3.6.1.4.1.9.9.692.1.3.3.1.10
cfmFlowMetricsIntPktRate This object indicates the packet rate at which the corresponding flow monitor processed data for the corresponding traffic flow during the measurement interval.	packets per secondCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount	.1.3.6.1.4.1.9.9.692.1.3.3.1.11

This table lists the standing conditions monitored by the
device.  The table groups descriptions for standing conditions
into condition profiles.
          
The figure below illustrates the relationship between a flow
monitor and a conditions profile.  Observe that a conditions
profile can contain the descriptions for the standing conditions
monitored for more than one flow monitor.  In this case, the
instance of cfmFlowMonitorConditionsProfile for each of these
flow monitors would reference the same conditions profile.
          
+------------------------------------------------+
| flow monitor 1                                 |
|                                                |
| cfmFlowMonitorConditionsProfile.1 = 42 -----+  |
|                                             |  |
| cfmFlowMonitorConditions.1                  |  |
|  N       2 1 0                              |  |
| +-+-...-+-+-+-+                             |  |
| | |     | | | |                             |  |
| +-+-...-+-+-+-+                             |  |
|  ^       ^ ^ ^                              |  |
|  |       | | |                              |  |
+--|-------|-|-|------------------------------|--+
   |       | | |                              |
   |       | | |                              V               
   |       | | |               +-----------------------------+
   |       | | |               | conditions profile 42       |
   |       | | |               | +-------------------------+ |
   |       | | +-----------------| cfmConditionsDescr.42.0 | |
   |       | |                 | +-------------------------+ |
   |       | |                 | +-------------------------+ |
   |       | +-------------------| cfmConditionsDescr.42.1 | |
   |       |                   | +-------------------------+ |
   |       |                   | +-------------------------+ |
   |       +---------------------| cfmConditionsDescr.42.2 | |
   |                           | +-------------------------+ |
   |                           |     :                       |
   |                           |     :                       |
   |                           | +-------------------------+ |
   +-----------------------------| cfmConditionsDescr.42.N | |
                               | +-------------------------+ |
                               +-----------------------------+
          
The figure below illustrates the relationship between a traffic
flow and a conditions profile.  Observe that a conditions
profile can contain the descriptions for the standing conditions
monitored for more than one traffic flow.  In this case, the
instance of cfmFlowMetricsConditionsProfile for each of these
traffic flows would reference the same conditions profile.
          
+------------------------------------------------+
| traffic flow 201                               |
|                                                |
| cfmFlowMetricsConditionsProfile.1.201 = 54 -+  |
|                                             |  |
| cfmFlowMetricsConditions.1.201              |  |
|  N       2 1 0                              |  |
| +-+-...-+-+-+-+                             |  |
| | |     | | | |                             |  |
| +-+-...-+-+-+-+                             |  |
|  ^       ^ ^ ^                              |  |
|  |       | | |                              |  |
+--|-------|-|-|------------------------------|--+
   |       | | |                              |
   |       | | |                              V               
   |       | | |               +-----------------------------+
   |       | | |               | conditions profile 54       |
   |       | | |               | +-------------------------+ |
   |       | | +-----------------| cfmConditionsDescr.54.0 | |
   |       | |                 | +-------------------------+ |
   |       | |                 | +-------------------------+ |
   |       | +-------------------| cfmConditionsDescr.54.1 | |
   |       |                   | +-------------------------+ |
   |       |                   | +-------------------------+ |
   |       +---------------------| cfmConditionsDescr.54.2 | |
   |                           | +-------------------------+ |
   |                           |     :                       |
   |                           |     :                       |
   |                           | +-------------------------+ |
   +-----------------------------| cfmConditionsDescr.54.N | |
                               | +-------------------------+ |
                               +-----------------------------+
          
The figure below illustrates the relationship between the
description of a standing condition and an alarm group if the
standing condition indicates that the device aggregates the
standing condition into an alarm group (i.e., the corresponding
instance of cfmConditionAlarm is 'grouped').
          
+-----------------------------------------+
| conditions profile 42                   |
| +-------------------------------------+ |
| | cfmConditionAlarm.42.9 = 'grouped'  |<-------+
| | cfmConditionAlarmGroup.42.9 = 4 -+  | |      |
| +----------------------------------|--+ |<--+  |
|                                    |    |   |  |
+------------------------------------|----+   |  |
                                     V        |  |
+-----------------------------------------+   |  |
| alarm group 4                           |   |  |
|                                         |   |  |
| cfmAlarmGroupConditionsProfile.4 = 42 ------+  |
| cfmAlarmGroupConditionId.4 = 9 ----------------+
|                                         |
+-----------------------------------------+

cfmConditionEntry row .1.3.6.1.4.1.9.9.692.1.4.1.1

An entry describes a standing condition monitored by the
device. The cfmConditionTable groups descriptions for standing
conditions into condition profiles.

A device creates a row in the cfmConditionTable w…

Indexes

cfmConditionProfile cfmConditionId

Column	Syntax	OID
cfmConditionProfile This object indicates an arbitrary integer-value that uniquely identifies the condition profile that contains the standing condition. Observe that the value assigned to a standing condition does not necessarily persist…	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionsProfile Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.4.1.1.1
cfmConditionId This object indicates an arbitrary integer-value that uniquely identifies the condition within the scope of the profile. The value of this column corresponds to the bit position in a binary string-value representing th…	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionIdentifier Type Constraints: range: 0..2039	.1.3.6.1.4.1.9.9.692.1.4.1.1.2
cfmConditionDescr This object indicates a human-readable description of the condition.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.4.1.1.3
cfmConditionMonitoredElement This object indicates the monitored element used in determining the state of the standing condition.	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.9.9.692.1.4.1.1.4
cfmConditionType This object indicates the type of condition: 'other' The implementation of the MIB does not recognize the condition described by this row. 'boolean' The value monitored only c…	Enumeration Enumerated Values: 1 other 2 boolean 3 risingThreshold 4 fallingThreshold 5 risingAndFallingThreshold	.1.3.6.1.4.1.9.9.692.1.4.1.1.5
cfmConditionThreshRiseScale This object indicates the scaling factor for the corresponding instance of cfmConditionThreshRise. This value of this column only has relevance if the corresponding instance of cfmConditionType is 'rising…	CISCO-FLOW-MONITOR-TC-MIBFlowMetricScale Type Values: 1 yocto 2 zepto 3 atto 4 femto 5 pico 6 nano 7 micro 8 milli 9 units 10 kilo 11 mega 12 giga 13 tera 14 exa 15 peta 16 zetta 17 yotta	.1.3.6.1.4.1.9.9.692.1.4.1.1.6
cfmConditionThreshRisePrecision This object indicates the precision for the corresponding instance of cfmConditionThreshRise. This value of this column only has relevance if the corresponding instance of cfmConditionType is 'risingThres…	CISCO-FLOW-MONITOR-TC-MIBFlowMetricPrecision Type Constraints: range: -8..-1 range: 1..9	.1.3.6.1.4.1.9.9.692.1.4.1.1.7
cfmConditionThreshRise This object indicates the value of the rising threshold. This value of this column only has relevance if the corresponding instance of cfmConditionType is 'risingThreshold' or 'risingAndFallingThreshold'.	CISCO-FLOW-MONITOR-TC-MIBFlowMetricValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.692.1.4.1.1.8
cfmConditionThreshFallScale This object indicates the scaling factor for the corresponding instance of cfmConditionThreshFall. The value of this column only has relevance if the corresponding instance of cfmConditionType is 'falling…	CISCO-FLOW-MONITOR-TC-MIBFlowMetricScale Type Values: 1 yocto 2 zepto 3 atto 4 femto 5 pico 6 nano 7 micro 8 milli 9 units 10 kilo 11 mega 12 giga 13 tera 14 exa 15 peta 16 zetta 17 yotta	.1.3.6.1.4.1.9.9.692.1.4.1.1.9
cfmConditionThreshFallPrecision This object indicates the precision for the corresponding instance of cfmConditionThreshFall. The value of this column only has relevance if the corresponding instance of cfmConditionType is 'fallingThres…	CISCO-FLOW-MONITOR-TC-MIBFlowMetricPrecision Type Constraints: range: -8..-1 range: 1..9	.1.3.6.1.4.1.9.9.692.1.4.1.1.10
cfmConditionThreshFall This object indicates the value of the falling threshold. The value of this column only has relevance if the corresponding instance of cfmConditionType is 'fallingThreshold' or 'risingAndFallingThreshold'.	CISCO-FLOW-MONITOR-TC-MIBFlowMetricValue Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.692.1.4.1.1.11
cfmConditionSampleType This object indicates how the device samples the monitored value before determining whether to assert the condition: 'other' The implementation of the MIB does not recognize the how th…	Enumeration Enumerated Values: 1 other 2 raw 3 slidingWindowAvg 4 expDecayingAvg	.1.3.6.1.4.1.9.9.692.1.4.1.1.13
cfmConditionSampleWindow This object indicates the sample window used by the device to compute an exponentially decaying average in the case that the corresponding instance of cfmConditionSampleType is 'averaged'. The value of th…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.692.1.4.1.1.14
cfmConditionAlarm This object indicates whether the device treats the standing condition as an alarm condition: 'none' The device does not treat the standing condition as an alarm condition. …	Enumeration Enumerated Values: 1 none 2 discrete 3 grouped	.1.3.6.1.4.1.9.9.692.1.4.1.1.15
cfmConditionAlarmActions This object indicates the actions taken by the device when the alarm condition changes state: 'syslog' The device sends a syslog message. 'snmp' The device sends a c…	Bits Enumerated Values: 0 syslog 1 snmp	.1.3.6.1.4.1.9.9.692.1.4.1.1.16
cfmConditionAlarmSeverity This object indicates the severity of the alarm condition. The value of this column only have relevance if the corresponding instance of cfmConditionAlarm is 'discrete'.	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.692.1.4.1.1.17
cfmConditionAlarmGroup This object indicates the alarm group the device aggregates the standing condition into. The value of this column only has relevance if the corresponding instance of cfmConditionAlarm is 'grouped'.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorAlarmGroupIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.4.1.1.18

This table lists alarm groups maintained by the device.

cfmAlarmGroupEntry row .1.3.6.1.4.1.9.9.692.1.5.1.1

An entry describes an alarm group. An alarm group defines an
alarm condition that is raised when a configured number of flows
in a set of flows asserts a configured standing condition.

The figure below ill…

Indexes

cfmAlarmGroupId

Column	Syntax	OID
cfmAlarmGroupId This object indicates an arbitrary integer-value that uniquely identifies the alarm group. Observe that the value assigned to an alarm group does not necessarily persist across restarts.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorAlarmGroupIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.1
cfmAlarmGroupDescr This object indicates a human-readable description of the alarm group.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.692.1.5.1.1.2
cfmAlarmGroupConditionsProfile This object indicates the conditions profile that contains the description of the standing profile aggregated by the alarm group.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionsProfile Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.3
cfmAlarmGroupConditionId This object indicates the standing condition aggregated by the alarm group.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionIdentifier Type Constraints: range: 0..2039	.1.3.6.1.4.1.9.9.692.1.5.1.1.4
cfmAlarmGroupFlowSet This object indicates the set of traffic flows aggregated by the alarm group.	CISCO-FLOW-MONITOR-TC-MIBFlowSetIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.5
cfmAlarmGroupFlowCount This object indicates the number of traffic flows in the set of traffic flows indicated by the corresponding instance of cfmAlarmGroupFlowSet.	traffic flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.6
cfmAlarmGroupThresholdUnits This object indicates the units for the corresponding instance of cfmAlarmGroupThreshold: 'other' The MIB implementation does not recognize the units in which the value of the correspo…	Enumeration Enumerated Values: 1 other 2 flows 3 percent	.1.3.6.1.4.1.9.9.692.1.5.1.1.7
cfmAlarmGroupThreshold This object indicates a number of flows that must assert the standing condition indicated by the corresponding instance of cfmAlarmGroupCondition before raising an alarm. If the corresponding instance of …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.8
cfmAlarmGroupRaised This object indicates whether the alarm group has raised an alarm.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.692.1.5.1.1.9
cfmAlarmGroupCurrentCount This object indicates the number of traffic flows currently asserting the standing condition aggregated by the alarm group.	traffic flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.692.1.5.1.1.10

This table lists the traffic flows contained by each set of
flows configured for the alarm groups contained by the
cfmAlarmGroupTable.

cfmAlarmGroupFlowEntry row .1.3.6.1.4.1.9.9.692.1.5.3.1

An entry describes a traffic flow contained by a set of flows.

An alarm group aggregates a standing condition from a set of
flows. cfmAlarmFlowSetId uniquely identifies a set of traffic
flows.
…

Indexes

cfmAlarmGroupFlowSetId cfmAlarmGroupFlowMonitorId cfmAlarmGroupFlowId

Column	Syntax	OID
cfmAlarmGroupFlowSetId This object indicates an arbitrary integer-value that uniquely identifies the set of traffic flows that contains the traffic flow represented by the row. Observe that the value assigned to a flow set does not necessari…	CISCO-FLOW-MONITOR-TC-MIBFlowSetIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.3.1.1
cfmAlarmGroupFlowMonitorId This object identifies the flow monitor responsible for the traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.3.1.2
cfmAlarmGroupFlowId This object identifies the traffic flow.	CISCO-FLOW-MONITOR-TC-MIBFlowIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.5.3.1.3

This table lists a history of the changes in the state of alarm
conditions monitored by the device.

cfmAlarmHistoryEntry row .1.3.6.1.4.1.9.9.692.1.6.3.1

An entry describes the change in the state of an alarm
condition observed by the device.

The device creates a row in the cfmAlarmHistoryTable when it
observes a change in the state of an alarm condition.
…

Indexes

cfmAlarmHistoryId

Column	Syntax	OID
cfmAlarmHistoryId This object indicates an arbitrary integer-value that uniquely identifies the event. Observe that the value assigned to a alarm history entry does not necessarily persist across restarts.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.692.1.6.3.1.1
cfmAlarmHistoryType This object indicates the type of event: 'cleared' The event signaled an alarm condition transitioning to the cleared state. 'raised' The event signalled an alarm condition tran…	Enumeration Enumerated Values: 1 cleared 2 raised	.1.3.6.1.4.1.9.9.692.1.6.3.1.2
cfmAlarmHistoryEntity This object indicates the entity that caused the event. If the alarm condition has an association with a flow monitor, then the value of this column is a row in the cfmFlowMonitorTable. If …	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.9.9.692.1.6.3.1.3
cfmAlarmHistoryConditionsProfile This object indicates the conditions profile containing the description of the alarm condition that changed state.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionsProfile Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.692.1.6.3.1.4
cfmAlarmHistoryConditionId This object indicates the alarm condition that changed state.	CISCO-FLOW-MONITOR-TC-MIBFlowMonitorConditionIdentifier Type Constraints: range: 0..2039	.1.3.6.1.4.1.9.9.692.1.6.3.1.5
cfmAlarmHistorySeverity This object indicates the severity of the alarm condition that changed state.	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.692.1.6.3.1.6
cfmAlarmHistoryTime This object indicates the value of sysUpTime when the alarm condition changed state. In the case the device updates standing/alarm conditions at the same time it captures a measurement interval, the value…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.692.1.6.3.1.7