CISCO-ENTITY-FRU-CONTROL-MIB Table View

This table lists the redundancy mode and the
operational status of the power supply groups
in the system.

cefcFRUPowerSupplyGroupEntry row .1.3.6.1.4.1.9.9.117.1.1.1.1

An cefcFRUPowerSupplyGroupTable entry lists the desired
redundancy mode, the units of the power outputs and the
available and drawn current for the power supply group.

Entries are created by the agent when…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcPowerRedundancyMode The administratively desired power supply redundancy mode.	PowerRedundancyTyper/w Type Values: 1 notsupported 2 redundant 3 combined 4 nonRedundant 5 psRedundant 6 inPwrSrcRedundant 7 psRedundantSingleInput	.1.3.6.1.4.1.9.9.117.1.1.1.1.1
cefcPowerUnits The units of primary supply to interpret cefcTotalAvailableCurrent and cefcTotalDrawnCurrent as power. For example, one 1000-watt power supply could deliver 100 amperes at 10 volts DC. So the value of c…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.117.1.1.1.1.2
cefcTotalAvailableCurrent Total current available for FRU usage.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.1.1.3
cefcTotalDrawnCurrent Total current drawn by powered-on FRUs.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.1.1.4
cefcPowerRedundancyOperMode The power supply redundancy operational mode.	PowerRedundancyType Type Values: 1 notsupported 2 redundant 3 combined 4 nonRedundant 5 psRedundant 6 inPwrSrcRedundant 7 psRedundantSingleInput	.1.3.6.1.4.1.9.9.117.1.1.1.1.5
cefcPowerNonRedundantReason This object has the value of notApplicable(1) when cefcPowerRedundancyOperMode of the instance does not have the value of nonRedundant(4). The other values explain the reason why cefcPowerRedundancyOperM…	Enumeration Enumerated Values: 1 notApplicable 2 unknown 3 singleSupply 4 mismatchedSupplies 5 supplyError	.1.3.6.1.4.1.9.9.117.1.1.1.1.6
cefcTotalDrawnInlineCurrent Total inline current drawn for inline operation.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.1.1.7

This table lists the power-related administrative status
and operational status of the manageable components
in the system.

cefcFRUPowerStatusEntry row .1.3.6.1.4.1.9.9.117.1.1.2.1

An cefcFRUPowerStatusTable entry lists the desired
administrative status, the operational status of the
power manageable component, and the current required by
the component for operation.

Entries are cre…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcFRUPowerAdminStatus Administratively desired FRU power state.	PowerAdminTyper/w Type Values: 1 on 2 off 3 inlineAuto 4 inlineOn 5 powerCycle	.1.3.6.1.4.1.9.9.117.1.1.2.1.1
cefcFRUPowerOperStatus Operational FRU power state.	PowerOperType Type Values: 1 offEnvOther 2 on 3 offAdmin 4 offDenied 5 offEnvPower 6 offEnvTemp 7 offEnvFan 8 failed 9 onButFanFail 10 offCooling 11 offConnectorRating 12 onButInlinePowerFail	.1.3.6.1.4.1.9.9.117.1.1.2.1.2
cefcFRUCurrent Current supplied by the FRU (positive values) or current required to operate the FRU (negative values).	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.2.1.3
cefcFRUPowerCapability This object indicates the set of supported power capabilities of the FRU. realTimeCurrent(0) - cefcFRURealTimeCurrent is supported by the FRU.	Bits Enumerated Values: 0 realTimeCurrent	.1.3.6.1.4.1.9.9.117.1.1.2.1.4
cefcFRURealTimeCurrent This object indicates the realtime value of current supplied by the FRU (positive values) or the realtime value of current drawn by the FRU (negative values).	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.2.1.5

This table lists the power capacity of a power FRU in the
system if it provides variable power. Power supplies usually
provide either system or inline power. They cannot be 
controlled by software to dictate how they distribute power.
We can also have what are known as variable power supplies.
They can provide both system and inline power and can be 
varied within hardware defined ranges for system and inline
limited by a total maximum combined output. They could be
configured by the user via CLI or SNMP or be controlled by
software internally.
This table supplements the information in the
cefcFRUPowerStatusTable for power supply FRUs. The 
cefcFRUCurrent attribute in that table provides the overall
current the power supply FRU can provide while this table 
gives us the individual contribution towards system and 
inline power.

cefcFRUPowerSupplyValueEntry row .1.3.6.1.4.1.9.9.117.1.1.4.1

An cefcFRUPowerSupplyValueTable entry lists the current
provided by the FRU for operation.

Entries are created by the agent at system power-up or
FRU insertion. Entries are deleted by the agent at FRU
rem…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcFRUTotalSystemCurrent Total current that could be supplied by the FRU (positive values) for system operations.	FRUCurrentTyper/w Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.1
cefcFRUDrawnSystemCurrent Amount of current drawn by the FRU's in the system towards system operations from this FRU	FRUCurrentTyper/w Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.2
cefcFRUTotalInlineCurrent Total current supplied by the FRU (positive values) for inline operations.	FRUCurrentTyper/w Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.3
cefcFRUDrawnInlineCurrent Amount of current that is being drawn from this FRU for inline operation.	FRUCurrentTyper/w Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.4
cefcFRUActualInputCurrent Amount of actual input current of this power supply.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.5
cefcFRUActualOutputCurrent Amount of actual output current of this power supply.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.1.4.1.6

A cefcModuleTable entry lists the operational and
administrative status information for ENTITY-MIB
entPhysicalTable entries for manageable components
of type PhysicalClass module(9).

cefcModuleEntry row .1.3.6.1.4.1.9.9.117.1.2.1.1

A cefcModuleStatusTable entry lists the operational and
administrative status information for ENTITY-MIB
entPhysicalTable entries for manageable components
of type PhysicalClass module(9).

Entries are crea…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcModuleAdminStatus This object provides administrative control of the module.	ModuleAdminTyper/w Type Values: 1 enabled 2 disabled 3 reset 4 outOfServiceAdmin	.1.3.6.1.4.1.9.9.117.1.2.1.1.1
cefcModuleOperStatus This object shows the module's operational state.	ModuleOperType Type Values: 1 unknown 2 ok 3 disabled 4 okButDiagFailed 5 boot 6 selfTest 7 failed 8 missing 9 mismatchWithParent 10 mismatchConfig 11 diagFailed 12 dormant 13 outOfServiceAdmin 14 outOfServiceEnvTemp 15 poweredDown 16 poweredUp 17 powerDenied 18 powerCycled 19 okButPowerOverWarning 20 okButPowerOverCritical 21 syncInProgress 22 upgrading 23 okButAuthFailed 24 mdr 25 fwMismatchFound 26 fwDownloadSuccess 27 fwDownloadFailure	.1.3.6.1.4.1.9.9.117.1.2.1.1.2
cefcModuleResetReason This object identifies the reason for the last reset performed on the module.	ModuleResetReasonType Type Values: 1 unknown 2 powerUp 3 parityError 4 clearConfigReset 5 manualReset 6 watchDogTimeoutReset 7 resourceOverflowReset 8 missingTaskReset 9 lowVoltageReset 10 controllerReset 11 systemReset 12 switchoverReset 13 upgradeReset 14 downgradeReset 15 cacheErrorReset 16 deviceDriverReset 17 softwareExceptionReset 18 restoreConfigReset 19 abortRevReset 20 burnBootReset 21 standbyCdHealthierReset 22 nonNativeConfigClearReset 23 memoryProtectionErrorReset	.1.3.6.1.4.1.9.9.117.1.2.1.1.3
cefcModuleStatusLastChangeTime The value of sysUpTime at the time the cefcModuleOperStatus is changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.117.1.2.1.1.4
cefcModuleLastClearConfigTime The value of sysUpTime when the configuration was most recently cleared.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.117.1.2.1.1.5
cefcModuleResetReasonDescription A description qualifying the module reset reason specified in cefcModuleResetReason. Examples: command xyz missing task switch over watchdog timeout etc. cefcMo…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.117.1.2.1.1.6
cefcModuleStateChangeReasonDescr This object displays human-readable textual string which describes the cause of the last state change of the module. This object contains zero length string if no meaningful reason could be provided. Exam…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.117.1.2.1.1.7
cefcModuleUpTime This object provides the up time for the module since it was last re-initialized. This object is not persistent; if a module reset, restart, power off, the up time starts from zero.	FRUTimeSeconds	.1.3.6.1.4.1.9.9.117.1.2.1.1.8
cefcVmModuleOperStatus This object indicates the VM module's operational state.	CefcVmModuleOperType Type Values: 1 down 2 up 3 unknown 4 goingDown	.1.3.6.1.4.1.9.9.117.1.2.1.1.9
cefcVmModuleStatusLastChangeTime The value of sysUpTime at the time the cefcVmModuleOperStatus is changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.117.1.2.1.1.10

This table sparsely augments the
cefcModuleTable (i.e., every row in
this table corresponds to a row in
the cefcModuleTable but not necessarily
vice-versa).
          
A cefcIntelliModuleTable entry lists the
information specific to intelligent
modules which cannot be provided by the
cefcModuleTable.

cefcIntelliModuleEntry row .1.3.6.1.4.1.9.9.117.1.2.2.1

A cefcIntelliModuleTable entry lists the
information specific to an intelligent
module which cannot be provided by
this module's corresponding instance in
the cefcModuleTable. Only an intelligent
module with Internet ad…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcIntelliModuleIPAddrType The type of Internet address by which the intelligent module is reachable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.117.1.2.2.1.1
cefcIntelliModuleIPAddr The Internet address configured for the intelligent module. The type of this address is determined by the value of the object cefcIntelliModuleIPAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.117.1.2.2.1.2

This table sparsely augments the cefcModuleTable
(i.e., every row in this table corresponds to a row in
the cefcModuleTable but not necessarily vice-versa).
          
A cefcModuleLocalSwitchingTable entry lists the
information specific to local switching capable
modules which cannot be provided by the
cefcModuleTable.

cefcModuleLocalSwitchingEntry row .1.3.6.1.4.1.9.9.117.1.2.3.1

A cefcModuleLocalSwitchingTable entry lists the
information specific to a local switching capable
module which cannot be provided by this module's
corresponding instance in the cefcModuleTable.
Only a module which is ca…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcModuleLocalSwitchingMode This object specifies the mode of local switching. enabled(1) - local switching is enabled. disabled(2) - local switching is disabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.9.117.1.2.3.1.1

This table contains the operational status information
for all ENTITY-MIB entPhysicalTable entries which have 
an entPhysicalClass of 'fan'; specifically, all  
entPhysicalTable entries which represent either: one 
physical fan, or a single physical 'fan tray' which is a
manufactured (inseparable in the field) combination of 
multiple fans.

cefcFanTrayStatusEntry row .1.3.6.1.4.1.9.9.117.1.4.1.1

An cefcFanTrayStatusTable entry lists the operational
status information for the ENTITY-MIB entPhysicalTable
entry which is identified by the value of entPhysicalIndex.
The value of entPhysicalClass for the identified …

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcFanTrayOperStatus The operational state of the fan or fan tray. unknown(1) - unknown. up(2) - powered on. down(3) - powered down. warning(4) - partial failure, needs replacement as soon as possible.	Enumeration Enumerated Values: 1 unknown 2 up 3 down 4 warning	.1.3.6.1.4.1.9.9.117.1.4.1.1.1
cefcFanTrayDirection The air flow direction of the fan or fan tray. unknown(1) - unknown. frontToBack(2) - air flow from front to back backToFront(3) - air flow from back to front	Enumeration Enumerated Values: 1 unknown 2 frontToBack 3 backToFront	.1.3.6.1.4.1.9.9.117.1.4.1.1.2

This table contains a list of fan information
for all the fans that have entPhysicalTable
entries with 'fan' in the entPhysicalClass
and capable of providing management information
defined in this table.

cefcFanEntry row .1.3.6.1.4.1.9.9.117.1.4.2.1

An entry containing management information
applicable to a particular fan unit.

Entries are created by the agent at system power-up or
fan or fan tray insertion. Entries are deleted
by the agent at the f…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcFanSpeed The speed of the fan.	rpmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.4.2.1.1
cefcFanSpeedPercent The percent of speed relative to the maximum speed of the fan.	percentCefcPercentOrMinusOne Type Constraints: range: -1..100	.1.3.6.1.4.1.9.9.117.1.4.2.1.2

This table contains one row per physical entity.

cefcPhysicalEntry row .1.3.6.1.4.1.9.9.117.1.5.1.1

Information about a particular physical entity.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcPhysicalStatus The status of this physical entity. other(1) - the status is not any of the listed below. supported(2) - this entity is supported. unsupported(3) - this entity is unsupported. incompatible(4) - this entity is incompatib…	Enumeration Enumerated Values: 1 other 2 supported 3 unsupported 4 incompatible	.1.3.6.1.4.1.9.9.117.1.5.1.1.1

This table contains the power input information
for all the power supplies that have entPhysicalTable
entries with 'powerSupply' in the entPhysicalClass. 
          
The entries are created by the agent at the system
power-up or power supply insertion.
          
Entries are deleted by the agent upon power supply
removal.
          
The number of entries is determined by the number of
power supplies and number of power inputs on the power 
supply.

cefcPowerSupplyInputEntry row .1.3.6.1.4.1.9.9.117.1.6.1.1

An entry containing power input management information
applicable to a particular power supply and input.

Indexes

ENTITY-MIBentPhysicalIndex cefcPowerSupplyInputIndex

Column	Syntax	OID
cefcPowerSupplyInputIndex A unique value, greater than zero, for each input on a power supply.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.6.1.1.1
cefcPowerSupplyInputType The type of an input power detected on the power supply. unknown(1): No input power is detected. acLow(2): Lower rating AC input power is detected. acHigh(3): Higher rating A…	Enumeration Enumerated Values: 1 unknown 2 acLow 3 acHigh 4 dcLow 5 dcHigh	.1.3.6.1.4.1.9.9.117.1.6.1.1.2

This table contains a list of possible output
mode for the power supplies, whose ENTITY-MIB
entPhysicalTable entries have an entPhysicalClass
of 'powerSupply'. It also indicate which mode
is the operational mode within the system.

cefcPowerSupplyOutputEntry row .1.3.6.1.4.1.9.9.117.1.6.2.1

A cefcPowerSupplyOutputTable entry lists the
power output capacity and its operational status
for manageable components of type PhysicalClass
'powerSupply'.

Entries are created by the agent at the system
po…

Indexes

ENTITY-MIBentPhysicalIndex cefcPSOutputModeIndex

Column	Syntax	OID
cefcPSOutputModeIndex A unique value, greater than zero, for each possible output mode on a power supply.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.6.2.1.1
cefcPSOutputModeCurrent The output capacity of the power supply.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.6.2.1.2
cefcPSOutputModeInOperation A value of 'true' indicates that this mode is the operational mode of the power supply output capacity. A value of 'false' indicates that this mode is not the operational mode of the power supply output c…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.117.1.6.2.1.3

This table contains the cooling capacity
information of the chassis whose ENTITY-MIB
entPhysicalTable entries have an
entPhysicalClass of 'chassis'.

cefcChassisCoolingEntry row .1.3.6.1.4.1.9.9.117.1.7.1.1

A cefcChassisCoolingEntry lists the maximum
cooling capacity that could be provided
for one slot on the manageable components of type
PhysicalClass 'chassis'.

Entries are created by the agent if the corres…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcChassisPerSlotCoolingCap The maximum cooling capacity that could be provided for any slot in this chassis. The default unit of the cooling capacity is 'cfm', if cefcChassisPerSlotCoolingUnit is not supported.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.7.1.1.1
cefcChassisPerSlotCoolingUnit The unit of the maximum cooling capacity for any slot in this chassis.	FRUCoolingUnit Type Values: 1 cfm 2 watts	.1.3.6.1.4.1.9.9.117.1.7.1.1.2

This table contains the cooling capacity
information of the fans whose ENTITY-MIB
entPhysicalTable entries have an
entPhysicalClass of 'fan'.

cefcFanCoolingEntry row .1.3.6.1.4.1.9.9.117.1.7.2.1

A cefcFanCoolingEntry lists the cooling
capacity that is provided by the
manageable components of type PhysicalClass
'fan'.

Entries are created by the agent if the corresponding
entry is created in ENTITY…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcFanCoolingCapacity The cooling capacity that is provided by this fan. The default unit of the fan cooling capacity is 'cfm', if cefcFanCoolingCapacityUnit is not supported.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.7.2.1.1
cefcFanCoolingCapacityUnit The unit of the fan cooling capacity.	FRUCoolingUnit Type Values: 1 cfm 2 watts	.1.3.6.1.4.1.9.9.117.1.7.2.1.2

This table contains the cooling requirement for
all the manageable components of type entPhysicalClass
'module'.

cefcModuleCoolingEntry row .1.3.6.1.4.1.9.9.117.1.7.3.1

A cefcModuleCoolingEntry lists the cooling
requirement for a manageable components of type
entPhysicalClass 'module'.

Entries are created by the agent at the system
power-up or module insertion.
…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcModuleCooling The cooling requirement of the module and its daughter cards. The default unit of the module cooling requirement is 'cfm', if cefcModuleCoolingUnit is not supported.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.7.3.1.1
cefcModuleCoolingUnit The unit of the cooling requirement of the module and its daughter cards.	FRUCoolingUnit Type Values: 1 cfm 2 watts	.1.3.6.1.4.1.9.9.117.1.7.3.1.2

This table contains a list of the possible cooling
capacity modes and properties of the fans, whose 
ENTITY-MIB entPhysicalTable entries have an 
entPhysicalClass of 'fan'.

cefcFanCoolingCapEntry row .1.3.6.1.4.1.9.9.117.1.7.4.1

A cefcFanCoolingCapacityEntry lists the cooling
capacity mode of a manageable components of type
entPhysicalClass 'fan'. It also lists the corresponding
cooling capacity provided and the power consumed
by the fan on thi…

Indexes

ENTITY-MIBentPhysicalIndex cefcFanCoolingCapIndex

Column	Syntax	OID
cefcFanCoolingCapIndex An arbitrary value that uniquely identifies a cooling capacity mode for a fan.	Unsigned32 Constraints: range: 1-4095	.1.3.6.1.4.1.9.9.117.1.7.4.1.1
cefcFanCoolingCapModeDescr A textual description of the cooling capacity mode of the fan.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.117.1.7.4.1.2
cefcFanCoolingCapCapacity The cooling capacity that could be provided when the fan is operating in this mode. The default unit of the cooling capacity is 'cfm', if cefcFanCoolingCapCapacityUnit is not supported.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.117.1.7.4.1.3
cefcFanCoolingCapCurrent The power consumption of the fan when operating in in this mode.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.7.4.1.4
cefcFanCoolingCapCapacityUnit The unit of the fan cooling capacity when operating in this mode.	FRUCoolingUnit Type Values: 1 cfm 2 watts	.1.3.6.1.4.1.9.9.117.1.7.4.1.5

This table contains the connector power
ratings of FRUs. 
          
Only components with power connector rating 
management are listed in this table.

cefcConnectorRatingEntry row .1.3.6.1.4.1.9.9.117.1.8.1.1

A cefcConnectorRatingEntry lists the
power connector rating information of a
component in the system.

An entry or entries are created by the agent
when an physical entity with connector rating
management …

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcConnectorRating The maximum power that the component's connector can withdraw.	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.8.1.1.1

This table contains the total power consumption
information for modules whose ENTITY-MIB 
entPhysicalTable entries have an entPhysicalClass 
of 'module'.

cefcModulePowerConsumptionEntry row .1.3.6.1.4.1.9.9.117.1.8.2.1

A cefcModulePowerConsumptionEntry lists the total
power consumption of a manageable components of type
entPhysicalClass 'module'.

Entries are created by the agent at the system
power-up or module insertion.…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cefcModulePowerConsumption The combined power consumption to operate the module and its submodule(s) and inline-power device(s).	FRUCurrentType Type Constraints: range: -1000000000..1000000000	.1.3.6.1.4.1.9.9.117.1.8.2.1.1