CISCO-CONTEXT-MAPPING-MIB Table View

This table contains information on which
cContextMappingVacmContextName is mapped to
which VRF, topology, and routing protocol instance.
          
This table is indexed by SNMP VACM context.
          
Configuring a row in this table for an SNMP context
does not require that the context be already defined,
i.e., a row can be created in this table for a context
before the corresponding row is created in RFC 3415's
vacmContextTable.
          
To create a row in this table, a manager must set
cContextMappingRowStatus to either 'createAndGo' or
'createAndWait'.
          
To delete a row in this table, a manager must set
cContextMappingRowStatus to 'destroy'.

cContextMappingEntry row .1.3.6.1.4.1.9.9.468.1.1.1

Information relating to a single mapping of
cContextMappingVacmContextName to the corresponding VRF,
the corresponding topology, and the corresponding routing
protocol instance.

Indexes

cContextMappingVacmContextName

Column	Syntax	OID
cContextMappingVacmContextName The vacmContextName given to the SNMP context. This is a human readable name identifying a particular SNMP VACM context at a particular SNMP entity. The empty contextName (zero length) represents the defa…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.9.9.468.1.1.1.1
cContextMappingVrfName The value of an instance of this object identifies the name given to the VRF to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string used in the ro…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.468.1.1.1.2
cContextMappingTopologyName The value of an instance of this object identifies the name given to the topology to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string used in t…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.468.1.1.1.3
cContextMappingProtoInstName The value of an instance of this object identifies the name given to the protocol instance to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.468.1.1.1.4
cContextMappingStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.468.1.1.1.5
cContextMappingRowStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.468.1.1.1.6

This table contains information on which
cContextMappingVacmContextName is mapped to
which bridge domain.
          
A Bridge Domain is one of the means by which it is possible 
to define an Ethernet broadcast domain on a bridging device. 
A network can have multiple broadcast domains configured.
This table helps the network management personnel to find 
out the  details of various broadcast domains configured 
in the network.
          
An entry need to exist in cContextMappingTable, to create 
an entry in this table.

cContextMappingBridgeDomainEntry row .1.3.6.1.4.1.9.9.468.1.2.1

Information relating to a single mapping of
cContextMappingVacmContextName to the
corresponding bridge domain.

To create a row in this table, a manager must set
cContextMappingBridgeDomainRowStatus to eith…

Indexes

cContextMappingVacmContextName

Column	Syntax	OID
cContextMappingBridgeDomainIdentifier The value of an instance of this object identifies the bridge domain to which the SNMP context is mapped to.	CISCO-TCCiscoBridgeDomainr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.468.1.2.1.1
cContextMappingBridgeDomainStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.468.1.2.1.2
cContextMappingBridgeDomainRowStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.468.1.2.1.3

This table contains information on mapping between
cContextMappingVacmContextName and bridge instance.
          
Bridge instance is an instance of a physical or logical 
bridge which has unique bridge-id.
          
If an entry is deleted from cContextMappingTable, the
corresponding entry in this table will also get deleted.
          
If an entry needs to be created in this table, the
corresponding entry must exist in cContextMappingTable.

cContextMappingBridgeInstanceEntry row .1.3.6.1.4.1.9.9.468.1.3.1

Information relating to a single mapping of
cContextMappingVacmContextName to the
corresponding bridge instance.

To create a row in this table, a manager must set
cContextMappingBridgeInstRowStatus to eith…

Indexes

cContextMappingVacmContextName

Column	Syntax	OID
cContextMappingBridgeInstName The object identifies the name given to bridge instance to which the SNMP context is mapped to. Value of this object cannot be changed when the RowStatus object in the same row is 'active'. …	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.468.1.3.1.1
cContextMappingBridgeInstStorageType The storage type for this conceptual row. Value of this object cannot be changed when the RowStatus object in the same row is 'active'. Conceptual rows having the value 'permanent' need no…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.468.1.3.1.2
cContextMappingBridgeInstRowStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.468.1.3.1.3

This table contains information on which
cContextMappingVacmContextName is mapped to
which License Group.
Group level licensing is used where each
Technology Package is enabled via a License.

cContextMappingLicenseGroupEntry row .1.3.6.1.4.1.9.9.468.1.4.1

Information relating to a single mapping of
CContextMappingVacmContextName to the
corresponding License Group.

Indexes

cContextMappingVacmContextName

Column	Syntax	OID
cContextMappingLicenseGroupName The value of an instance of this object identifies the name given to the Group to which the SNMP context is mapped. Feature sets from all groups will be combined to form universal image. User can configu…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.468.1.4.1.1
cContextMappingLicenseGroupStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.468.1.4.1.2
cContextMappingLicenseGroupRowStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.468.1.4.1.3