CISCO-CABLE-L2VPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
15

ccl2vpnMacVpnIdL2vpnIndexTable

table
.1.3.6.1.4.1.9.9.700.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccl2vpnMacVpnIdL2vpnIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-L2VPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-L2VPN-MIB::ccl2vpnMacVpnIdL2vpnIndexTable' 
Every L2VPN provisioned Cable Modem can be a part of
multiple VPNs and the CMTS assigns a L2vpnIndex for
each {Cable Modem MAC address, VPN-id} pair. This table
maps {Cable Modem MAC address, VPN-id} to the L2vpnIndex.
ccl2vpnMacVpnIdL2vpnIndexEntry row .1.3.6.1.4.1.9.9.700.1.1.1
Each row contains the Cable Modem MAC address and VPN
identifier and the corresponding L2vpnIndex. Entry in
this table is populated for each one of the pseudo-wire
provisioned on the CMTS.
Indexes
Column Syntax OID
ccl2vpnMac
This object identifies the Cable Modem MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.700.1.1.1.1
ccl2vpnVpnId
This object identifies the VPN provisioned for L2VPN
Cable Modem.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.9.700.1.1.1.2
ccl2vpnMacVpnIdToL2vpnIndex
This object identifies the L2vpnIndex assigned for this Cable
Modem MAC Address/VPN pair by the CMTS.
CiscoCableL2vpnIndex
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.700.1.1.1.3

ccl2vpnPWL2vpnIndexTable

table
.1.3.6.1.4.1.9.9.700.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccl2vpnPWL2vpnIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-L2VPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-L2VPN-MIB::ccl2vpnPWL2vpnIndexTable' 
Every L2VPN Cable Modem can be provisioned with multiple
VPNs and for each {Cable Modem MAC address, VPN-id} pair,
there is a IP/MPLS pseudo-wire established. The pseudo-wire
is specified by {peer IP address, VCID}. This table maps
{peer IP address, VCID} to the L2vpnIndex.
ccl2vpnPWL2vpnIndexEntry row .1.3.6.1.4.1.9.9.700.1.2.1
Each row contains the pseudo-wire peer IP address and
Virtual Circuit Identifier (VCID) and the corresponding
L2vpnIndex. Entry in this table is populated for each one
of the pseudo-wire provisioned on the CMTS.
Indexes
Column Syntax OID
ccl2vpnPseudoWireType
This object identifies the pseudo-wire type.
CISCO-IETF-PW-TC-MIBCpwVcType
Type Values:
0other
1frameRelay
2atmAal5Vcc
3atmTransparent
4ethernetVLAN
5ethernet
6hdlc
7ppp
8cep
9atmVccCell
10atmVpcCell
11ethernetVPLS
12e1Satop
13t1Satop
14e3Satop
15t3Satop
16basicCesPsn
17basicTdmIp
18tdmCasCesPsn
19tdmCasTdmIp
 .1.3.6.1.4.1.9.9.700.1.2.1.1
ccl2vpnPeerIPAddressType
This object identifies the pseudo-wire peer IP address
type provisioned for L2VPN.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.700.1.2.1.2
ccl2vpnPeerIPAddress
This object identifies the pseudo-wire peer IP address
provisioned for L2VPN. The type of this address is
determined by the value of ccl2vpnPeerIPAddressType
object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.700.1.2.1.3
ccl2vpnVCID
This object identifies the Virtual Circuit Identifier
(VCID) of the pseudo-wire.
CISCO-IETF-PW-TC-MIBCpwVcIDType .1.3.6.1.4.1.9.9.700.1.2.1.4
ccl2vpnPWToL2vpnIndex
This object identifies the L2vpnIndex assigned by CMTS
for this pseudo-wire peer IP address/VCID pair and for
this Cable Modem MAC Address/VPN.
CiscoCableL2vpnIndex
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.700.1.2.1.5

ccl2vpnL2vpnIndexPWTable

table
.1.3.6.1.4.1.9.9.700.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccl2vpnL2vpnIndexPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-L2VPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-L2VPN-MIB::ccl2vpnL2vpnIndexPWTable' 
For every VPN provisioned for the L2VPN Cable Modem,
the CMTS establishes pseudo-wire. This table maps L2vpnIndex
to pseudo-wire configuration parameters.
ccl2vpnL2vpnIndexPWEntry row .1.3.6.1.4.1.9.9.700.1.3.1
Each row contains the L2vpnIndex for the pseudo-wire and
the corresponding configuration paramters including the
Cable Modem MAC address, VPN identifier, peer IP address,
Virtual Circuit Identifier (VCID) and pseudo-wir…
Indexes
Column Syntax OID
ccl2vpnL2vpnIndex
This object identifies the L2vpnIndex assigned for this
Cable Modem MAC Address/VPN pair by the CMTS.
CiscoCableL2vpnIndex
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.700.1.3.1.1
ccl2vpnPWMAC
This object identifies the Cable Modem MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.700.1.3.1.2
ccl2vpnPWVpnId
This object identifies the VPN Identifier provisioned for
L2VPN Cable Modem.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.9.700.1.3.1.3
ccl2vpnPWPeerIPAddressType
This object identifies the pseudo-wire peer IP address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.700.1.3.1.4
ccl2vpnPWPeerIPAddress
This object identifies the pseudo-wire peer IP address.
The type of this address is determined by the value of
ccl2vpnPWPeerIPAddressType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.700.1.3.1.5
ccl2vpnPWType
This object identifies the pseudo-wire type.
CISCO-IETF-PW-TC-MIBCpwVcType
Type Values:
0other
1frameRelay
2atmAal5Vcc
3atmTransparent
4ethernetVLAN
5ethernet
6hdlc
7ppp
8cep
9atmVccCell
10atmVpcCell
11ethernetVPLS
12e1Satop
13t1Satop
14e3Satop
15t3Satop
16basicCesPsn
17basicTdmIp
18tdmCasCesPsn
19tdmCasTdmIp
 .1.3.6.1.4.1.9.9.700.1.3.1.6
ccl2vpnPWVCID
This object identifies the Virtual Circuit Identifier (VCID)
for pseudo-wire.
CISCO-IETF-PW-TC-MIBCpwVcIDType .1.3.6.1.4.1.9.9.700.1.3.1.7