Standard view Table view

CISCO-CABLE-L2VPN-MIB

        This MIB module defines managed objects that facilitate
the management of Cisco devices complying to the DOCSIS
L2VPN Feature for IP/MPLS pseudo-wire. The Cisco CMTS
implementation of IP/MPLS pseudo-wire is based on DOCSIS
BSOD L2VPN specification.
        
The information available through this MIB includes:
Mapping information between various configuration of the
pseudo-wire pertaining to DOCSIS BSOD L2VPN. The MIB
tables implemented give quick access to information using
either Cable Modem MAC address/VPN, peer IP address/VCID
or L2vpnIndex as index in tables.
        
Glossary:
        
CMTS   - Cable Modem Termination System
VCID   - Virtual Circuit Identifier
MPLS   - Multi-Protocol Label Switching
AToM   - Any Transport Over MPLS
DOCSIS - Data over Cable Service Interface Specification
BSOD   - Business Services over DOCSIS
L2VPN  - Layer 2 Virtual Private Network
pseudo-wire - Layer 2 connection over IP/MPLS backbone

Source file: CISCO-CABLE-L2VPN-MIB
Last revised: 17 Jun 2009, 00:00 UTC
Identity: ciscoCableL2vpnMIB
Base OID: 1.3.6.1.4.1.9.9.700

Imported Objects

CISCO-IETF-PW-TC-MIB	CpwVcIDType CpwVcType
CISCO-SMI	ciscoMgmt
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	MacAddress TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-CABLE-L2VPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-CABLE-L2VPN-MIB::ciscoCableL2vpnMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-L2VPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-L2VPN-MIB::ciscoCableL2vpnMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (27)

ciscoCableL2vpnMIB		`.1.3.6.1.4.1.9.9.700`
ciscoCableL2vpnMIBNotifs		`.1.3.6.1.4.1.9.9.700.0`
ciscoCableL2vpnMIBObjects		`.1.3.6.1.4.1.9.9.700.1`
ccl2vpnMacVpnIdL2vpnIndexTable		`.1.3.6.1.4.1.9.9.700.1.1`
ccl2vpnMacVpnIdL2vpnIndexEntry	ccl2vpnMacccl2vpnVpnId	`.1.3.6.1.4.1.9.9.700.1.1.1`
ccl2vpnMac	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.700.1.1.1.1`
ccl2vpnVpnId	OctetString	`.1.3.6.1.4.1.9.9.700.1.1.1.2`
ccl2vpnMacVpnIdToL2vpnIndex	CiscoCableL2vpnIndex	`.1.3.6.1.4.1.9.9.700.1.1.1.3`
ccl2vpnPWL2vpnIndexTable		`.1.3.6.1.4.1.9.9.700.1.2`
ccl2vpnPWL2vpnIndexEntry	ccl2vpnPseudoWireTypeccl2vpnPeerIPAddressTypeccl2vpnPeerIPAddressccl2vpnVCID	`.1.3.6.1.4.1.9.9.700.1.2.1`
ccl2vpnPseudoWireType	CISCO-IETF-PW-TC-MIBCpwVcType	`.1.3.6.1.4.1.9.9.700.1.2.1.1`
ccl2vpnPeerIPAddressType	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.700.1.2.1.2`
ccl2vpnPeerIPAddress	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.700.1.2.1.3`
ccl2vpnVCID	CISCO-IETF-PW-TC-MIBCpwVcIDType	`.1.3.6.1.4.1.9.9.700.1.2.1.4`
ccl2vpnPWToL2vpnIndex	CiscoCableL2vpnIndex	`.1.3.6.1.4.1.9.9.700.1.2.1.5`
ccl2vpnL2vpnIndexPWTable		`.1.3.6.1.4.1.9.9.700.1.3`
ccl2vpnL2vpnIndexPWEntry	ccl2vpnL2vpnIndex	`.1.3.6.1.4.1.9.9.700.1.3.1`
ccl2vpnL2vpnIndex	CiscoCableL2vpnIndex	`.1.3.6.1.4.1.9.9.700.1.3.1.1`
ccl2vpnPWMAC	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.700.1.3.1.2`
ccl2vpnPWVpnId	OctetString	`.1.3.6.1.4.1.9.9.700.1.3.1.3`
ccl2vpnPWPeerIPAddressType	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.700.1.3.1.4`
ccl2vpnPWPeerIPAddress	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.700.1.3.1.5`
ccl2vpnPWType	CISCO-IETF-PW-TC-MIBCpwVcType	`.1.3.6.1.4.1.9.9.700.1.3.1.6`
ccl2vpnPWVCID	CISCO-IETF-PW-TC-MIBCpwVcIDType	`.1.3.6.1.4.1.9.9.700.1.3.1.7`
ciscoCableL2vpnMIBConform		`.1.3.6.1.4.1.9.9.700.2`
ccl2vpnMIBCompliances		`.1.3.6.1.4.1.9.9.700.2.1`
ccl2vpnMIBGroups		`.1.3.6.1.4.1.9.9.700.2.2`

Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-CABLE-L2VPN-MIBciscoselected
- CISCO-IETF-PW-TC-MIBcisco2 symbols
  - CISCO-SMIcisco1 symbol
    - SNMPv2-SMIrfcdefault fallback3 symbols
  - SNMPv2-SMIrfcdefault fallbackshared3 symbols
  - SNMPv2-TCrfcdefault fallback1 symbol
    - SNMPv2-SMIrfcshared1 symbol
- CISCO-SMIciscoshared1 symbol
- INET-ADDRESS-MIBrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-TCrfcshared1 symbol
- SNMPv2-CONFrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

Type Definitions (1)

CiscoCableL2vpnIndex	Unsigned32	`range: 1..4294967295`

Conformance Groups (1)

ccl2vpnPWMappingGroup	ccl2vpnPWMAC ccl2vpnPWVpnId ccl2vpnPWPeerIPAddressType ccl2vpnPWPeerIPAddress ccl2vpnPWType ccl2vpnPWVCID ccl2vpnMacVpnIdToL2vpnIndex ccl2vpnPWToL2vpnIndex A collection of objects providing Cable L2VPN pseudo-wire configuration.	`.1.3.6.1.4.1.9.9.700.2.2.1`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.700.2.1.1

The compliance statement for the CISCO-CABLE-L2VPN-MIB.

Required groups

mandatory	ccl2vpnPWMappingGroup