CISCO-ATM-NETWORK-CLOCK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
15

cncManualSourceTable

table
.1.3.6.1.4.1.9.9.121.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cncManualSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-NETWORK-CLOCK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-NETWORK-CLOCK-MIB::cncManualSourceTable' 
A table of network clock sources available to the managed
system.
cncManualSourceEntry row .1.3.6.1.4.1.9.9.121.1.2.1.1
Network clock status and statistics for sources of network
clock. When the value of cncDistributionMethod is 'manual',
the managed system uses this table to select a source of
network clock for the managed system. Wi…
Indexes
Column Syntax OID
cncManualSourcePriority
A value used to identify a source of network clock
available to the device's manual network clock selection
algorithm.
Enumeration
Enumerated Values:
1primary
2secondary
3default
 .1.3.6.1.4.1.9.9.121.1.2.1.1.1
cncManualSourceId
The entPhysicalIndex that uniquely identifies a source of
network clock within the managed system.
ENTITY-MIBPhysicalIndexr/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.121.1.2.1.1.2
cncManualSourceHealth
The health of the clock source identified by
cncManualSourceId.
CncHealth
Type Values:
1good
2bad
3unknown
 .1.3.6.1.4.1.9.9.121.1.2.1.1.3
cncManualRowStatus
The status of this conceptual row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.121.1.2.1.1.4

cncNcdpSourceTable

table
.1.3.6.1.4.1.9.9.121.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cncNcdpSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-NETWORK-CLOCK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpSourceTable' 
A table of configured network clock sources available to
the managed system for use by the NCDP protocol entity.
cncNcdpSourceEntry row .1.3.6.1.4.1.9.9.121.1.3.1.1
Network clock status and statistics for sources of network
clock identified by entPhysicalIndex and used by the managed
system when the value of cncDistributionMethod is 'ncdp'.

A source of network clock fo…
Indexes
Column Syntax OID
cncNcdpBestClockSource
An indication of whether the NCDP entity is presently
advertising this clock source as the best clock source
available in this table.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.121.1.3.1.1.1
cncNcdpPriority
The network-wide priority of this clock source if
configured as a source of network clock for NCDP. The
highest priority clock source is that clock source having
the lowest positive numeric value. The clock source wit…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.121.1.3.1.1.2
cncNcdpStratum
The stratum level associated with this clock source if
configured as a source of network clock for NCDP. (See
American National Standards Institute, ANSI T1.101,
'Synchronization Interface for Digital Networks' and B…
CncStratumr/w
Type Values:
1s1
2s2e
3s2
4s3e
5s3
6s4e
7s4
8other
 .1.3.6.1.4.1.9.9.121.1.3.1.1.3
cncNcdpPRSReference
An value that identifies the primary reference source that
the network clock available from this source is traceable
to if configured as a source of network clock for NCDP.
(See American National Standards Institute, A…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.9.9.121.1.3.1.1.4
cncNcdpSourceHealth
The health of the clock source associated with this row.
CncHealth
Type Values:
1good
2bad
3unknown
 .1.3.6.1.4.1.9.9.121.1.3.1.1.5
cncNcdpRowStatus
The status of this conceptual row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.121.1.3.1.1.6

cncNcdpAtmTable

table
.1.3.6.1.4.1.9.9.121.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cncNcdpAtmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-NETWORK-CLOCK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpAtmTable' 
A table containing the status of NCDP on the device's ATM
interfaces.
cncNcdpAtmEntry row .1.3.6.1.4.1.9.9.121.1.4.1.1
An entry in the cncNcdpAtm table containing the status of
Ncdp on an ATM interface.

A row in this table is created by the managed system and
disappears when the associated physical entity disappears.
…
Indexes
Column Syntax OID
cncNcdpEnable
An indication of whether NCDP is presently running on an
interface. When NCDP is enabled for an interface, the
interface is an active member of the clock distribution
topology as seen by the NCDP protocol entity.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.121.1.4.1.1.1
cncNcdpAdminWeight
A weight metric used by the NCDP protocol entity and
associated with a physical interface that supports
synchronous clock recovery. When NCDP is enabled for the
physical interface the value of this object is used by N…
Integer32r/w
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.9.9.121.1.4.1.1.2
cncNcdpVpi
The VPI value of the VCC supporting the NCDP entity at this
ATM interface. If the values of cncNcdpVpi and
cncNcdpVci are both equal to zero then the NCDP entity
is not supported at this ATM interface.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.121.1.4.1.1.3
cncNcdpVci
The VCI value of the VCC supporting the NCDP entity at this
ATM interface. If the values of cncNcdpVpi and
cncNcdpVci are both equal to zero then the NCDP entity
is not supported at this ATM interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.121.1.4.1.1.4
cncNcdpHealth
The health of the clock source associated with this row.
CncHealth
Type Values:
1good
2bad
3unknown
 .1.3.6.1.4.1.9.9.121.1.4.1.1.5