CISCO-ADSL-DMT-LINE-MIB Table View

This table extends the adslLineTable and contains enterprise-
specific common attributes describing both ends of ADSL lines
supported by the system.

cAdslDmtLineEntry row .1.3.6.1.4.1.9.9.130.1.1.1

A set of enterprise-specific common attributes describing both
ends of an ADSL line supported by the system. There exists an
entry for each ifEntry with an ifType of adsl(94).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cAdslDmtLineOverheadFraming This object represents the negotiated overhead framing structure being used by the ATU-C and ATU-R.	DmtOverheadFraming Type Values: 0 structure0 1 structure1 2 structure2 3 structure3	.1.3.6.1.4.1.9.9.130.1.1.1.1

This table extends the adslAtucPhysTable and contains
enterprise-specific physical layer parameters for ATU-C
class devices supported by the system.

cAdslAtucDmtPhysEntry row .1.3.6.1.4.1.9.9.130.1.2.1

A set of enterprise-specific physical-layer parameters for an
ATU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of adsl(94).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cAdslAtucDmtState The value of this object specifies the enterprise-specific specific status of the ATU-C. If the value of adslAtucDMTState is not 'other', then the value of this object is 'standard'. If the value of adslAtucDMTState is…	Enumeration Enumerated Values: 1 standard 2 unknown 3 downloading 4 downloadFailed 5 testing	.1.3.6.1.4.1.9.9.130.1.2.1.1

This table extends the adslAtucChanTable and contains
enterprise-specific physical layer parameters for the ATU-C
channels supported by the system.

cAdslAtucDmtChanEntry row .1.3.6.1.4.1.9.9.130.1.4.1

A set of enterprise-specific physical-layer parameters for an
ATU-C channel supported by the system. There exists an entry
for each ifEntry with an ifType of adslInterleave(124) or
adslFast(125).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cAdslAtucDmtChanFecSize This object specifies the number of FEC redundancy bytes the ATU-C appends to downstream on the corresponding channel. The ATU-C can fallback from the initial value specified for the corresponding channel (i.e., cAdsl…	bytesDmtFecSize Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.4.1.1
cAdslAtucDmtChanCodewordSize This object specifies the actual number of symbols per codeword being used by the ATU-C for downstream messages. The ATU-C and ATU-R negotiate this value during the training sequence. A value of 0 indicates the automa…	symbolsDmtCodewordSize Type Constraints: range: -1 range: 1..2 range: 4 range: 8 range: 16	.1.3.6.1.4.1.9.9.130.1.4.1.2

This table extends the adslAturChanTable and contains
enterprise-specific physical layer parameters for the ATU-R
channels supported by the system.

cAdslAturDmtChanEntry row .1.3.6.1.4.1.9.9.130.1.5.1

A set of enterprise-specific physical-layer parameters for an
ATU-R channel supported by the system. There exists an entry
for each ifEntry with an ifType of adslInterleave(124) or
adslFast(125).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cAdslAturDmtChanFecSize This object specifies the number of FEC redundancy bytes the ATU-R appends to upstream on the corresponding channel. The ATU-C can fallback from the initial value specified for the corresponding channel (i.e., cAdslAt…	bytesDmtFecSize Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.5.1.1
cAdslAturDmtChanCodewordSize This object specifies the actual number of symbols per codeword being used by the ATU-R for upstream messages. The ATU-C and ATU-R negotiate this value during the training sequence.	symbolsDmtCodewordSize Type Constraints: range: -1 range: 1..2 range: 4 range: 8 range: 16	.1.3.6.1.4.1.9.9.130.1.5.1.2

This table extends the adslLineConfProfileTable and contains
enterprise-specific ADSL DMT line configuration information.

cAdslDmtLineConfProfileEntry row .1.3.6.1.4.1.9.9.130.1.14.1

A configuration profile containing enterprise-specific ADSL DMT
line configuration information.

Indexes

ADSL-LINE-MIBadslLineConfProfileName

Column	Syntax	OID
cAdslLineDmtConfOperatingMode This object specifies the line operating mode being employed by the ADSL line. An ADSL line uses of one of two operating modes: - Automatic An ATU-C that employs this operating mode automatically …	Enumerationr/w Enumerated Values: 1 automatic 2 splitterless 3 g992Dot1 4 g992Dot2 5 t1Dot413	.1.3.6.1.4.1.9.9.130.1.14.1.1
cAdslLineDmtConfTrainingMode This object specifies the mode employed by the ATU-C and ATU-R when training against each other. One of two training modes can be employed: - Standard An ATU-C initiates a training sequence using the…	Enumerationr/w Enumerated Values: 1 standard 2 fast	.1.3.6.1.4.1.9.9.130.1.14.1.2
cAdslAtucDmtConfFastFecSize This object specifies the initial number of FEC redundancy bytes the ATU-C appends to downstream frames transmitted over the fast channel during the training sequence. The ATU-C can fallback from this value depending o…	bytesDmtFecSizer/w Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.3
cAdslAtucDmtConfInterleaveFecSize This object specifies the initial number of FEC redundancy bytes the ATU-C appends to downstream frames transmitted over the interleaved channel during the training sequence. The ATU-C can fallback from this value depe…	bytesDmtFecSizer/w Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.4
cAdslAtucDmtConfCodewordSize This object specifies the number of symbols per codeword being used by the ATU-C for downstream messages on an interleaved channel during the training sequence. The ATU-C can fallback from this value based on the aggre…	symbolsDmtCodewordSizer/w Type Constraints: range: -1 range: 1..2 range: 4 range: 8 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.5
cAdslAtucDmtConfOverheadFraming This object specifies the overhead framing structure which the ATU-C will request when establishing a link with the ATU-R. The value of 'structure0' is not valid.	DmtOverheadFramingr/w Type Values: 0 structure0 1 structure1 2 structure2 3 structure3	.1.3.6.1.4.1.9.9.130.1.14.1.6
cAdslAtucDmtConfBitSwapEnabled This object specifies whether the ATU-C performs bitswapping. Bitswapping attempts to maintain an acceptable margin for each bin; equalizing the margin across all bins through bit reallocation, thereby maximizing error …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.130.1.14.1.7
cAdslAtucDmtConfBitSwapFrom Bitswapping attempts to maintain an acceptable margin for each bin; equalizing the margin across all bins through bit reallocation, thereby maximizing error performance. The ATU-C performs bitswapping by …	dBInteger32r/w Constraints: range: 1-9	.1.3.6.1.4.1.9.9.130.1.14.1.8
cAdslAtucDmtConfBitSwapTo Bitswapping attempts to maintain an acceptable margin for each bin; equalizing the margin across all bins through bit reallocation, thereby maximizing error performance. The ATU-C performs bitswapping by …	dBInteger32r/w Constraints: range: 1-9	.1.3.6.1.4.1.9.9.130.1.14.1.9
cAdslAturDmtConfFastFecSize This object specifies the initial number of FEC redundancy bytes the ATU-R appends to upstream frames transmitted over the fast channel during the training sequence. The ATU-C can force the ATU-R to fallback from this …	bytesDmtFecSizer/w Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.10
cAdslAturDmtConfInterleaveFecSize This object specifies the initial number of FEC redundancy bytes the ATU-R appends to upstream frames transmitted over the interleaved channel during the training sequence. The ATU-C can force the ATU-R to fallback fro…	bytesDmtFecSizer/w Type Constraints: range: 0 range: 2 range: 4 range: 6 range: 8 range: 10 range: 12 range: 14 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.11
cAdslAturDmtConfCodewordSize This object specifies the number of symbols per codeword being used by the ATU-R for upstream messages on an interleaved channel during the training sequence. The ATU-C can force the ATU-R to fallback from this value b…	symbolsDmtCodewordSizer/w Type Constraints: range: -1 range: 1..2 range: 4 range: 8 range: 16	.1.3.6.1.4.1.9.9.130.1.14.1.12
cAdslAtucDmtConfMinrateBlock This object is used to implement min-rate blocking on DMT interfaces that support this option.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.130.1.14.1.13
cAdslAtucDmtDualBitmapEnabled This object is used to implement dual bitmap tables for Annex C compliant DMT interfaces. The bin data for the DSL interface will appear in cAdslAturDmtBinTable and cAdslAtucDmtBinTable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.130.1.14.1.14

This table extends the adslLineAlarmConfProfileTable and
contains enterprise-specific ADSL line configuration information
pertaining to alarms.

cAdslDmtLineAlarmConfProfileEntry row .1.3.6.1.4.1.9.9.130.1.15.1

A configuration profile containing enterprise-specific ADSL
line configuration information pertaining to alarms

Indexes

ADSL-LINE-MIBadslLineAlarmConfProfileName

Column	Syntax	OID
cAdslAtucDmtThreshRateFallback This object specifies a bit rate threshold. When the following condition is met, the agent generates an adslAtucRateChangeTrap: ( I + F ) < cAdslAtucDmtThreshRateFallback where I = ads…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.130.1.15.1.1
cAdslAturDmtThreshRateFallback This object specifies a bit rate threshold. When the following condition is met, the agent generate an adslAturRateChangeTrap: ( I + F ) < cAdslAturDmtThreshRatefallback where I = adsl…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.130.1.15.1.2

This table contains information on the 256 DMT bins in 
the downstream direction. Bins correspond to 4 kHz slots 
on a trained DSL line modem.  The information stored in 
each bin includes bit counts per hertz of bandwidth and 
the transmitter gain in 0.01 dB increments.

cAdslAtucDmtBinEntry row .1.3.6.1.4.1.9.9.130.1.19.1

A set of enterprise-specific parameters for a DMT
DSL interface. After bin data has been collected
successfully there will be at least 1 row entry for
the interface indicated by cAdslAtucDmtBinIfIndex.

Indexes

cAdslAtucDmtBitmapIndex cAdslAtucDmtBinIndex

Column	Syntax	OID
cAdslAtucDmtBitmapIndex This index is used to step through all of the bin tables on a DSL interface.	Unsigned32 Constraints: range: 1-5	.1.3.6.1.4.1.9.9.130.1.19.1.1
cAdslAtucDmtBinIndex A unique value, greater than zero, for each dmt bin on the interface specified in cAdslDmtBinIfNumber It is recommended that values be assigned contiguously starting from 1.	Unsigned32 Constraints: range: 1-256	.1.3.6.1.4.1.9.9.130.1.19.1.2
cAdslAtucDmtBinBitAlloc This stores the number of bits allotted per Hertz in this bin. For example, a value of 15 would indicate that this slot is tranmitting at a physical rate of 64kbits/sec.	bits/HzUnsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.130.1.19.1.3
cAdslAtucDmtBinTxGain This field has the transmitter gain for this bin and is stored in 0.01 dB increments.	tenth dBUnsigned32 Constraints: range: 0-400	.1.3.6.1.4.1.9.9.130.1.19.1.4
cAdslAtucDmtBinNumber This field indicates the 4.3125 kHz band of downstream DSL line spectrum occupied by a bin. For example, a value of 3 would indicate the band from 12.9375 to 17.25 kHz of the spectrum.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.130.1.19.1.5

This table contains information for the 32 DMT bins in 
the upstream direction. A bin corresponds to a 4 kHz slots 
on a trained DSL line modem. The information stored in each
bin includes bit counts per hertz and the transmitter gain 
in 0.01 dB increments.

cAdslAturDmtBinEntry row .1.3.6.1.4.1.9.9.130.1.20.1

A set of enterprise-specific parameters for a DMT
DSL interface. After bin data has been collected
successfully there will be at least 1 row entry for
the interface indicated by cAdslAtucDmtBinIfIndex.

Indexes

cAdslAturDmtBitmapIndex cAdslAturDmtBinIndex

Column	Syntax	OID
cAdslAturDmtBitmapIndex This index is used to step through all of the bin tables on a DSL interface.	Unsigned32 Constraints: range: 1-5	.1.3.6.1.4.1.9.9.130.1.20.1.1
cAdslAturDmtBinIndex A unique value, greater than zero, for each dmt bin on the interface specified in cAdslDmtBinIfNumber It is recommended that values be assigned contiguously starting from 1.	Unsigned32 Constraints: range: 1-256	.1.3.6.1.4.1.9.9.130.1.20.1.2
cAdslAturDmtBinBitAlloc This stores the number of bits allotted per Hertz in this bin. For example, a value of 15 indicates that this slot is transmitting at a physical rate of 64 Kbits.	bits/HzUnsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.130.1.20.1.3
cAdslAturDmtBinTxGain This field has the transmitter gain for this bin and is stored in 0.01 dB increments.	hundredth dBUnsigned32 Constraints: range: 0-400	.1.3.6.1.4.1.9.9.130.1.20.1.4
cAdslAturDmtBinNumber This field indicates the 4.3125 kHz band of upstream DSL line spectrum occupied by a bin. For example, a value of 3 would indicate the band from 12.9375 to 17.25 kHz of the spectrum.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.130.1.20.1.5