CISCO-ACCESS-ENVMON-MIB
The MIB module to describe the additional status of
the Environmental Monitor on those Cisco Access devices
which support one.
- Source file
CISCO-ACCESS-ENVMON-MIB- Last revised
- Identity
ciscoAccessEnvMonMIB- Base OID
1.3.6.1.4.1.9.9.61
Imported Objects
| CISCO-ENVMON-MIB | ciscoEnvMonSupplyStatusEntry ciscoEnvMonTemperatureState ciscoEnvMonTemperatureStatusDescr ciscoEnvMonVoltageState ciscoEnvMonVoltageStatusDescr |
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ACCESS-ENVMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ACCESS-ENVMON-MIB::ciscoAccessEnvMonMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ACCESS-ENVMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ACCESS-ENVMON-MIB::ciscoAccessEnvMonMIB'
Objects (10)
Showing 10 of 10 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.61 |
||
.1.3.6.1.4.1.9.9.61.1 |
||
.1.3.6.1.4.1.9.9.61.1.1 |
||
.1.3.6.1.4.1.9.9.61.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.61.1.1.1.1 |
|
.1.3.6.1.4.1.9.9.61.2 |
||
.1.3.6.1.4.1.9.9.61.2.0 |
||
.1.3.6.1.4.1.9.9.61.3 |
||
.1.3.6.1.4.1.9.9.61.3.1 |
||
.1.3.6.1.4.1.9.9.61.3.2 |
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- CISCO-ENVMON-MIBcisco
- CISCO-ACCESS-ENVMON-MIBciscoselected
Conformance Groups (1)
|
A collection of objects providing the additional Environmental
Monitor information beyond that provided by Cisco Environmental Monitor MIB. |
.1.3.6.1.4.1.9.9.61.3.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.61.3.1.1The compliance statement for entities which implement
the Cisco Environmental Monitor Supplemental MIB.
the Cisco Environmental Monitor Supplemental MIB.
Required groups
| mandatory | caemGroup |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.61.2.0.1 |
A caemTemperatureNotification is sent if the over temperature
condition is detected in the managed system. This is a replacement for the ciscoEnvMonTemperatureNotification trap because the information 'ciscoEnvMonTemperatureStatusValue' required by the trap is not available in the managed system. |
|
.1.3.6.1.4.1.9.9.61.2.0.2 |
A caemVoltageNotification is sent if the over voltage
condition is detected and ciscoEnvMonVoltageState is not set to 'notPresent' in the managed system. This is a replacement for the ciscoEnvMonVoltageNotification trap because the information 'ciscoEnvMonVoltageStatusValue' required by the trap is not available in the managed system. |
