CISCO-ENVMON-MIB

Monitored by Observium
        Added an object ciscoEnvMonTemperatureStatusValueRev1 to
CiscoEnvMonTemperatureStatusEntry for support of negative temperature
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors
Explore Observium network monitoring
Source file
CISCO-ENVMON-MIB
Last revised
Identity
ciscoEnvMonMIB
Base OID
1.3.6.1.4.1.9.9.13
Imported Objects
CISCO-SMI ciscoMgmt
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ENVMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ENVMON-MIB::ciscoEnvMonMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENVMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENVMON-MIB::ciscoEnvMonMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (45)
18 directly used by Observium
.1.3.6.1.4.1.9.9.13
.1.3.6.1.4.1.9.9.13.1
Enumeration
.1.3.6.1.4.1.9.9.13.1.1
.1.3.6.1.4.1.9.9.13.1.2
.1.3.6.1.4.1.9.9.13.1.2.1
Integer32
.1.3.6.1.4.1.9.9.13.1.2.1.1
OctetString
.1.3.6.1.4.1.9.9.13.1.2.1.2
.1.3.6.1.4.1.9.9.13.1.2.1.3
.1.3.6.1.4.1.9.9.13.1.2.1.4
.1.3.6.1.4.1.9.9.13.1.2.1.5
.1.3.6.1.4.1.9.9.13.1.2.1.6
.1.3.6.1.4.1.9.9.13.1.2.1.7
.1.3.6.1.4.1.9.9.13.1.3
.1.3.6.1.4.1.9.9.13.1.3.1
Integer32
.1.3.6.1.4.1.9.9.13.1.3.1.1
OctetString
.1.3.6.1.4.1.9.9.13.1.3.1.2
degrees CelsiusSNMPv2-SMIGauge32
.1.3.6.1.4.1.9.9.13.1.3.1.3
degrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.9.9.13.1.3.1.4
degrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.9.9.13.1.3.1.5
.1.3.6.1.4.1.9.9.13.1.3.1.6
degrees CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.9.9.13.1.3.1.7
.1.3.6.1.4.1.9.9.13.1.4
.1.3.6.1.4.1.9.9.13.1.4.1
Integer32
.1.3.6.1.4.1.9.9.13.1.4.1.1
OctetString
.1.3.6.1.4.1.9.9.13.1.4.1.2
.1.3.6.1.4.1.9.9.13.1.4.1.3
.1.3.6.1.4.1.9.9.13.1.5
.1.3.6.1.4.1.9.9.13.1.5.1
Integer32
.1.3.6.1.4.1.9.9.13.1.5.1.1
OctetString
.1.3.6.1.4.1.9.9.13.1.5.1.2
.1.3.6.1.4.1.9.9.13.1.5.1.3
Enumeration
.1.3.6.1.4.1.9.9.13.1.5.1.4
Bits
.1.3.6.1.4.1.9.9.13.1.6
.1.3.6.1.4.1.9.9.13.2
.1.3.6.1.4.1.9.9.13.2.1
.1.3.6.1.4.1.9.9.13.2.2
.1.3.6.1.4.1.9.9.13.2.3
.1.3.6.1.4.1.9.9.13.2.4
.1.3.6.1.4.1.9.9.13.2.5
.1.3.6.1.4.1.9.9.13.2.6
.1.3.6.1.4.1.9.9.13.3
.1.3.6.1.4.1.9.9.13.3.0
.1.3.6.1.4.1.9.9.13.4
.1.3.6.1.4.1.9.9.13.4.1
.1.3.6.1.4.1.9.9.13.4.2
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. CISCO-ENVMON-MIBciscoselected
Type Definitions (2)
Enumeration
normal(1)
warning(2)
critical(3)
shutdown(4)
notPresent(5)
notFunctioning(6)
Integer32
Conformance Groups (6)
A collection of objects providing environmental
monitoring capability to a cisco chassis. This group
is deprecated in favour of ciscoEnvMonMIBGroupRev.
.1.3.6.1.4.1.9.9.13.4.2.1
A collection of objects providing environmental
monitoring capability to a cisco chassis.
.1.3.6.1.4.1.9.9.13.4.2.2
A collection of objects providing enabling/disabling
of the status change notifications for environmental
monitoring.
.1.3.6.1.4.1.9.9.13.4.2.3
A notification group providing shutdown notification
for environmental monitoring.
.1.3.6.1.4.1.9.9.13.4.2.4
A collection of notifications providing the status
change for environmental monitoring.
.1.3.6.1.4.1.9.9.13.4.2.5
A collection of various notifications for the
enviromental monitoring mib module. The notifications
the group and the group are both in deprecated state.
The notifications in the group were deprecated in
favour of notifications in
ciscoEnvMonStatChangeNotifGroup.
.1.3.6.1.4.1.9.9.13.4.2.6
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.13.4.1.1
The compliance statement for entities which implement
the Cisco Environmental Monitor MIB. This is
deprecated and new compliance
ciscoEnvMonMIBComplianceRev1 is added.
Required groups

OID .1.3.6.1.4.1.9.9.13.4.1.2
The compliance statement for entities which implement
the Cisco Environmental Monitor MIB.
Required groups
mandatory ciscoEnvMonMIBGroupRev
mandatory ciscoEnvMonMIBNotifGroup
optional ciscoEnvMonEnableStatChangeGroup The ciscoEnvMonEnableStatChangeGroup is optional.
This group is applicable for implementations which
need status change notifications for environmental
monitoring.
optional ciscoEnvMonStatChangeNotifGroup The ciscoEnvMonStatChangeNotifGroup is optional.
This group is applicable for implementations which
need status change notifications for environmental
monitoring.
Notifications / Traps (9)
NameOIDDescription
.1.3.6.1.4.1.9.9.13.3.0.1
A ciscoEnvMonShutdownNotification is sent if the environmental
monitor detects a testpoint reaching a critical state
and is about to initiate a shutdown. This notification
contains no objects so that it may be encoded and sent in the
shortest amount of time possible. Even so, management
applications should not rely on receiving such a notification
as it may not be sent before the shutdown completes.
.1.3.6.1.4.1.9.9.13.3.0.2
A ciscoEnvMonVoltageNotification is sent if the voltage
measured at a given testpoint is outside the normal range
for the testpoint (i.e. is at the warning, critical, or
shutdown stage). Since such a notification is usually
generated before the shutdown state is reached, it can
convey more data and has a better chance of being sent
than does the ciscoEnvMonShutdownNotification.
This notification is deprecated in favour of
ciscoEnvMonVoltStatusChangeNotif.
.1.3.6.1.4.1.9.9.13.3.0.3
A ciscoEnvMonTemperatureNotification is sent if the
temperature measured at a given testpoint is outside
the normal range for the testpoint (i.e. is at the warning,
critical, or shutdown stage). Since such a Notification
is usually generated before the shutdown state is reached,
it can convey more data and has a better chance of being
sent than does the ciscoEnvMonShutdownNotification.
This notification is deprecated in favour of
ciscoEnvMonTempStatusChangeNotif.
.1.3.6.1.4.1.9.9.13.3.0.4
A ciscoEnvMonFanNotification is sent if any one of
the fans in the fan array (where extant) fails.
Since such a notification is usually generated before
the shutdown state is reached, it can convey more
data and has a better chance of being sent
than does the ciscoEnvMonShutdownNotification.
This notification is deprecated in favour of
ciscoEnvMonFanStatusChangeNotif.
.1.3.6.1.4.1.9.9.13.3.0.5
A ciscoEnvMonRedundantSupplyNotification is sent if
the redundant power supply (where extant) fails.
Since such a notification is usually generated before
the shutdown state is reached, it can convey more
data and has a better chance of being sent
than does the ciscoEnvMonShutdownNotification.
This notification is deprecated in favour of
ciscoEnvMonSuppStatusChangeNotif.
.1.3.6.1.4.1.9.9.13.3.0.6
A ciscoEnvMonVoltStatusChangeNotif is sent if there is
change in the state of a device being monitored
by ciscoEnvMonVoltageState.
.1.3.6.1.4.1.9.9.13.3.0.7
A ciscoEnvMonTempStatusChangeNotif is sent if there
is change in the state of a device being monitored
by ciscoEnvMonTemperatureState.
.1.3.6.1.4.1.9.9.13.3.0.8
A ciscoEnvMonFanStatusChangeNotif is sent if there
is change in the state of a device being monitored
by ciscoEnvMonFanState.
.1.3.6.1.4.1.9.9.13.3.0.9
A ciscoEnvMonSupplyStatChangeNotif is sent if there
is change in the state of a device being monitored
by ciscoEnvMonSupplyState.