CIENA-CES-RSTP-MIB
This MIB module defines the mgmt objects and notifications
for the RSTP.
- Source file
CIENA-CES-RSTP-MIB- Last revised
- Identity
cienaCesRstpMIB- Base OID
1.3.6.1.4.1.1271.2.1.10
Imported Objects
Net-SNMP examples using the ciena MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CIENA-CES-RSTP-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CIENA-CES-RSTP-MIB::cienaCesRstpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-RSTP-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-RSTP-MIB::cienaCesRstpMIB'
Objects (6)
Showing 6 of 6 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1271.2.1.10 |
||
.1.3.6.1.4.1.1271.2.1.10.2 |
||
.1.3.6.1.4.1.1271.2.1.10.2.1 |
||
.1.3.6.1.4.1.1271.2.1.10.2.2 |
||
.1.3.6.1.4.1.1271.2.2.10 |
||
.1.3.6.1.4.1.1271.2.2.10.0 |
Dependencies (17) 6 direct · 11 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- CIENA-SMIciena
- CIENA-TCciena
- CIENA-GLOBAL-MIBciena
- CIENA-CES-MODULE-MIBciena
- CIENA-CES-CHASSIS-MIBciena
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- CIENA-CES-PORT-MIBciena
- RSTP-MIBrfc
- CIENA-CES-RSTP-MIBcienaselected
Notifications / Traps (6)
| Name | OID | Description |
|---|---|---|
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort
|
.1.3.6.1.4.1.1271.2.2.10.0.1 |
A cienaCesRstpPortBackupNotification is sent when the
device detects a self loop (such as, the same cable connected to two ports on the same device). To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpPortBackupTrapState must be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, and dot1dStpPort. |
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort
|
.1.3.6.1.4.1.1271.2.2.10.0.2 |
A cienaCesRstpPvstBpduReceivedNotification is sent when a PVST BPDU is received
on the port. This trap is sent out every minute. To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpPortPvstBPduReceivedTrapState must be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, and dot1dStpPort. |
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort
|
.1.3.6.1.4.1.1271.2.2.10.0.3 |
A cienaCesRstpSelfLoopNotification is sent when the device detects the same
cable connected to a port in a loop back. Also, if loop-back blocking is enabled on the device, RSTP blocks this port (self disable). To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpPortSelfLoopTrapState must be set to enabled. These are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, and dot1dStpPort. |
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort RSTP-MIBdot1dStpPortOperEdgePort
|
.1.3.6.1.4.1.1271.2.2.10.0.4 |
A cienaCesRstpPortOperEdgeNotification trap is sent when the device detects a port
RSTP OperEdge change. To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpPortOperEdgeTrapState must be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, dot1dStpPort, and dot1dStpPortOperEdgePort. |
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort
|
.1.3.6.1.4.1.1271.2.2.10.0.5 |
A cienaCesRstpPortFlapNotification trap is sent when the device detects a port
flapping. This trap is generated if the device detects that a port flapped more than once within 1 minute timer period and it has not sent trap within last 5 minutes. To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpPortFlapTrapState must be set to enable. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, and dot1dStpPort. |
|
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifChassisIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifShelfIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifSlotIndex CIENA-CES-PORT-MIBcienaCesPortPgIdMappingNotifPortNumber BRIDGE-MIBdot1dStpPort
|
.1.3.6.1.4.1.1271.2.2.10.0.6 |
A cienaCesRstpBridgeRootPortLostNotification trap is sent when the device detects
that the bridge root port is lost. This trap indicates either the link failure or link partner RSTP disabled. To enable the device to send this notification: cienaCesPortAllTrapState, cienaCesLogicalPortConfigPortAllTrapState for the port, and cienaCesRstpBridgeRootPortLostTrapState must be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber, and dot1dStpPort. |