CIENA-CES-MODULE-MIB

Monitored by Observium

        This module defines the module configuration objects and also the objects required for
module related notifications.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

Sensors

Explore Observium network monitoring

Source file: CIENA-CES-MODULE-MIB
Last revised: 4 Jun 2018, 00:00 UTC
Identity: cienaCesModuleMIB
Base OID: 1.3.6.1.4.1.1271.2.1.2

Imported Objects

CIENA-GLOBAL-MIB	cienaGlobalMacAddress cienaGlobalSeverity
CIENA-SMI	cienaCesConfig cienaCesNotifications
CIENA-TC	CienaGlobalState
SNMPv2-CONF	NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC	DisplayString MacAddress TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the ciena MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CIENA-CES-MODULE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CIENA-CES-MODULE-MIB::cienaCesModuleMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-MODULE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-MODULE-MIB::cienaCesModuleMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (116)

2 directly used by Observium

cienaCesModuleMIB		`.1.3.6.1.4.1.1271.2.1.2`
cienaCesModuleMIBObjects		`.1.3.6.1.4.1.1271.2.1.2.1`
cienaCesModuleGlobal		`.1.3.6.1.4.1.1271.2.1.2.1.1`
cienaCesModuleGlobalPostState	CIENA-TCCienaGlobalState	`.1.3.6.1.4.1.1271.2.1.2.1.1.1`
cienaCesModule		`.1.3.6.1.4.1.1271.2.1.2.1.2`
cienaCesModuleTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.1`
cienaCesModuleEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1`
cienaCesModuleChassisIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.1`
cienaCesModuleStandbyStatus	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.10`
cienaCesModuleLastRebootReason	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.11`
cienaCesModuleAdminPostState	CIENA-TCCienaGlobalState	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.12`
cienaCesModuleOperPostState	CIENA-TCCienaGlobalState	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.13`
cienaCesModuleTrapState r/w	CIENA-TCCienaGlobalState	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.16`
cienaCesModuleChassisNotifIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.17`
cienaCesModuleShelfNotifIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.18`
cienaCesModuleSlotNotifIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.19`
cienaCesModuleShelfIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.2`
cienaCesModuleSlotName	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.20`
cienaCesModuleLatchLocation	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.21`
cienaCesModuleSlotIndx	Unsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.3`
cienaCesModuleModel	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.4`
cienaCesModuleType	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.5`
cienaCesModuleDescription	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.6`
cienaCesModuleAdminState	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.7`
cienaCesModuleOperState	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.8`
cienaCesModuleProtectionRole	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.1.1.9`
cienaCesModuleDescriptionTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.2`
cienaCesModuleDescriptionEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1`
cienaCesModuleDescriptionBoardName	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.1`
cienaCesModuleDescriptionBoardPartNum	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.2`
cienaCesModuleDescriptionBoardSerialNum	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.3`
cienaCesModuleDescriptionBoardDesc	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.4`
cienaCesModuleDescriptionHwVersion	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.5`
cienaCesModuleDescriptionMfgDate	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.6`
cienaCesModuleDescriptionBaseMac	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.7`
cienaCesModuleDescriptionUpTime	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.8`
cienaCesModuleDescriptionTotalNumPorts	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.2.1.9`
cienaCesModuleTempSensorTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.3`
cienaCesModuleTempSensorEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndxcienaCesModuleSensorIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1`
cienaCesModuleSensorIndx	Integer32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.1`
cienaCesModuleSensorDescription OBS ✓	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.2`
cienaCesModuleSensorCurrentTemp OBS ✓	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.3`
cienaCesModuleSensorHighTemp	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.4`
cienaCesModuleSensorLowTemp	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.5`
cienaCesModuleSensorHighTempThreshold	Integer32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.6`
cienaCesModuleSensorLowTempThreshold	Integer32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.7`
cienaCesModuleSensorNotifIndx	Integer32	`.1.3.6.1.4.1.1271.2.1.2.1.2.3.1.8`
cienaCesSwModule		`.1.3.6.1.4.1.1271.2.1.2.1.2.4`
cienaCesGlobalSwState	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.1`
cienaCesModuleSwTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2`
cienaCesModuleSwEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1`
cienaCesModuleSwState	SwModuleState	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.1`
cienaCesModuleSwBank0KernelVersion	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.10`
cienaCesModuleSwBank0KernelStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.11`
cienaCesModuleSwBank1KernelVersion	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.12`
cienaCesModuleSwBank1KernelStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.13`
cienaCesModuleSwBank0UbootVersion	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.14`
cienaCesModuleSwBank0UbootStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.15`
cienaCesModuleSwBank1UbootVersion	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.16`
cienaCesModuleSwBank1UbootStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.17`
cienaCesModuleSwUbootGoldVersion	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.18`
cienaCesModuleSwUbootGoldStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.19`
cienaCesModuleSwRunningRelease	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.2`
cienaCesModuleSwMIBVer	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.20`
cienaCesModuleSwRunningReleasePartition	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.3`
cienaCesModuleSwReleasePartition0Pkg	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.4`
cienaCesModuleSwReleasePartition0PkgStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.5`
cienaCesModuleSwReleasePartition1Pkg	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.6`
cienaCesModuleSwReleasePartition1PkgStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.7`
cienaCesModuleSwReleasePartition2Pkg	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.8`
cienaCesModuleSwReleasePartition2PkgStatus	SwPkgStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.9`
cienaCesModulePOSTErrorTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.5`
cienaCesModulePOSTErrorEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndxcienaCesModulePOSTErrorIndex	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1`
cienaCesModulePOSTErrorIndex	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1.1`
cienaCesModulePOSTErrorDescription	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1.2`
cienaCesModulePOSTErrorSeverity	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1.3`
cienaCesModulePOSTErrorScope	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1.4`
cienaCesModulePOSTScopeIndex	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.5.1.5`
cienaCesModuleResourceHealthTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.6`
cienaCesModuleResourceHealthEntry	cienaCesModuleResourceHealthSubCategorycienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndxcienaCesModuleResourceDeviceIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1`
cienaCesModuleResourceHealthSubCategory	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.1`
cienaCesModuleResourceDeviceIndx	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.2`
cienaCesModuleResourceHealthState	TceHealthStatus	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.3`
cienaCesModuleResourceHealthCurrMeasurement	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.4`
cienaCesModuleResourceHealthMaxMeasurement	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.5`
cienaCesModuleResourceHealthMaxThreshold	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.2.6.1.6`
cienaCesModuleIDPTable		`.1.3.6.1.4.1.1271.2.1.2.1.2.8`
cienaCesModuleIDPEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndx	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1`
cienaCesModuleIDPEthBaseMac	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.1`
cienaCesModuleIDPSWCompat	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.10`
cienaCesModuleIDPFTC	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.11`
cienaCesModuleIDPEthBaseMacRange	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.2`
cienaCesModuleIDPModuleSerialNumber	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.3`
cienaCesModuleIDPModelPartNumber	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.4`
cienaCesModuleIDPModelRevision	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.5`
cienaCesModuleIDPProductID	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.6`
cienaCesModuleIDPMfgDate	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.7`
cienaCesModuleIDPCleiCode	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.8`
cienaCesModuleIDPBarcode	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.1271.2.1.2.1.2.8.1.9`
cienaCesModuleNotifAttrs		`.1.3.6.1.4.1.1271.2.1.2.1.3`
cienaCesModuleSystemProtectionMode	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.3.1`
cienaCesModuleSwitchOverReason	Enumeration	`.1.3.6.1.4.1.1271.2.1.2.1.3.2`
cienaCesModuleNotifTable		`.1.3.6.1.4.1.1271.2.1.2.1.3.3`
cienaCesModuleNotifEntry	cienaCesModuleChassisIndxcienaCesModuleShelfIndxcienaCesModuleSlotIndx	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1`
cienaCesModuleHealthCategory	TceHealthCategory	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.1`
cienaCesModuleHealthSubCategory	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.2`
cienaCesModuleHealthStatus	TceHealthStatus	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.3`
cienaCesModuleHealthStatusLast	TceHealthStatus	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.4`
cienaCesModuleHealthOriginType	HealthOriginType	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.5`
cienaCesModuleHealthOriginName	OctetString	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.6`
cienaCesModuleHealthOriginUnitId	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.1271.2.1.2.1.3.3.1.7`
cienaCesModuleConformance		`.1.3.6.1.4.1.1271.2.1.2.2`
cienaCesModuleMIBCompliances		`.1.3.6.1.4.1.1271.2.1.2.2.1`
cienaCesModuleMIBGroups		`.1.3.6.1.4.1.1271.2.1.2.2.2`
cienaCesModuleMIBNotificationPrefix		`.1.3.6.1.4.1.1271.2.2.3`
cienaCesModuleMIBNotifications		`.1.3.6.1.4.1.1271.2.2.3.0`

Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CIENA-CES-MODULE-MIBcienaselected
- CIENA-GLOBAL-MIBciena2 symbols
  - CIENA-SMIciena1 symbol
    - SNMPv2-SMIrfcdefault fallback3 symbols
  - CIENA-TCciena1 symbol
    - SNMPv2-TCrfcdefault fallback1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared2 symbols
  - SNMPv2-TCrfcdefault fallbackshared1 symbol
- CIENA-SMIcienashared2 symbols
- CIENA-TCcienashared1 symbol
- SNMPv2-CONFrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared6 symbols
- SNMPv2-TCrfcdefault fallbackshared3 symbols

Dependency-first compile order

Type Definitions (5)

HealthOriginType	Enumeration	`none(0)` `chassis(1)` `slot(2)` `port(3)` `unit(4)`
SwModuleState	Enumeration	`installing(1)` `booting(2)` `initializing(3)` `good(4)` `failed(5)` `disabled(6)` `empty(7)` `unsupported(8)` `unknown(9)`
SwPkgStatus	Enumeration	`unknown(0)` `good(1)` `invalid(2)` `loading(3)` `syncing(4)` `waiting(5)` `burning(6)` `empty(7)`
TceHealthCategory	Enumeration	`unknown(1)` `cpu(2)` `datapath(3)` `ethernet(4)` `fabric(5)` `sm(6)` `tempSm(7)` `samplesSm(8)` `disk(9)` `tempModule(10)` `samplesModule(11)` `fanTray(12)` `fanTraySpeedMismatch(13)` `fanSpeedMismatch(14)` `tempFan(15)` `samplesFan(16)` `fanRpm(17)` `power(18)` `feedPower(19)` `systemResource(20)` `memory(21)` `mac(22)` `i2c(23)` `flash(24)` `transceiver(25)` `link(26)` `iomStatus(27)` `usbFlash(28)` `linxstats(29)` `smFabric(30)` `spi(31)` `slotResource(32)` `tempIom(33)` `powerParams(34)` `powerOutputVoltage(35)` `tempModem(36)` `watermarkModem(37)` `fileDescriptor(38)` `process(39)` `thread(40)`
TceHealthStatus	Enumeration	`unknown(1)` `normal(2)` `warning(3)` `degraded(4)` `faulted(5)`

Conformance Groups (5)

moduleConfigGroup	cienaCesModuleModel cienaCesModuleType cienaCesModuleDescription cienaCesModuleAdminState cienaCesModuleOperState cienaCesModuleProtectionRole cienaCesModuleStandbyStatus cienaCesModuleLastRebootReason cienaCesModuleAdminPostState cienaCesModuleOperPostState A collection of objects providing information about configuration table.	`.1.3.6.1.4.1.1271.2.1.2.2.2.1`
moduleDescriptionGroup	cienaCesModuleDescriptionBoardName cienaCesModuleDescriptionBoardDesc cienaCesModuleDescriptionTotalNumPorts cienaCesModuleDescriptionHwVersion cienaCesModuleDescriptionMfgDate cienaCesModuleDescriptionBaseMac cienaCesModuleDescriptionBoardSerialNum cienaCesModuleDescriptionBoardPartNum cienaCesModuleDescriptionUpTime A collection of objects providing information about module capabilities.	`.1.3.6.1.4.1.1271.2.1.2.2.2.2`
moduleSensorGroup	cienaCesModuleSensorDescription cienaCesModuleSensorCurrentTemp cienaCesModuleSensorHighTemp cienaCesModuleSensorLowTemp cienaCesModuleSensorHighTempThreshold cienaCesModuleSensorLowTempThreshold A collection of objects providing information of module temperature sensors.	`.1.3.6.1.4.1.1271.2.1.2.2.2.3`
moduleNotifGroup	cienaCesModuleStateChangeNotification cienaCesModuleHealthStatusUnknownNotification cienaCesModuleHealthStatusWarningNotification cienaCesModuleHealthStatusFaultedNotification cienaCesModuleHealthStatusDegradedNotification cienaCesModuleHealthStatusGoodNotification cienaCesModuleSensorHighTempNotification cienaCesModuleSensorNormalTempNotification cienaCesModuleSensorLowTempNotification cienaCesModuleHASwitchOverNotification cienaCesModuleProtectionModeColdNotification cienaCesModuleProtectionModeWarmNotification cienaCesModuleProtectionModeUnprotectedNotification cienaCesModuleProtectionModeHotNotification cienaCesModulePostErrorNotification cienaCesModuleFastReloadUnsuccessfulNotification cienaCesModuleHitlessModeUnsuccessfulNotification cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification cienaCesModuleSwitchFabricDisruptedRecoverableNotification cienaCesModuleSwitchFabricDisruptedRecoverableClrNotification cienaCesClockRateMismatchNotification cienaCesModuleIncompatibilityNotification cienaCesModuleLatchOpenNotification A collection of objects providing information about module notifications.	`.1.3.6.1.4.1.1271.2.1.2.2.2.4`
modulePostErrorGroup	cienaCesModulePOSTErrorDescription cienaCesModulePOSTErrorSeverity cienaCesModulePOSTErrorScope cienaCesModulePOSTScopeIndex A collection of objects providing information of module POST errors.	`.1.3.6.1.4.1.1271.2.1.2.2.2.5`

Notifications / Traps (27)

Name	OID	Description
cienaCesModuleStateChangeNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleAdminState cienaCesModuleOperState	`.1.3.6.1.4.1.1271.2.2.3.0.1`	A cienaCesModuleStateChange notification is sent when the operational state of the module is changed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
cienaCesModuleHASwitchOverNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleSwitchOverReason cienaCesModuleAdminState cienaCesModuleOperState	`.1.3.6.1.4.1.1271.2.2.3.0.10`	This notification is sent for CTM switchover. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, and cienaCesModuleOperState.
cienaCesModuleProtectionModeColdNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleSystemProtectionMode	`.1.3.6.1.4.1.1271.2.2.3.0.11`	This notification is sent when the protection mode of the system changes to cold. A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
cienaCesModuleProtectionModeWarmNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleSystemProtectionMode	`.1.3.6.1.4.1.1271.2.2.3.0.12`	This notification is sent when the protection mode of the system changes to warm. This state is not supported on the 5410 platform. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
cienaCesModuleProtectionModeUnprotectedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleSystemProtectionMode	`.1.3.6.1.4.1.1271.2.2.3.0.13`	This notification is sent when the protection mode of the system changes to unprotected. A protection level of unprotected implies that there is no secondary CTM present in the system or that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure, the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
cienaCesModuleProtectionModeHotNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleSystemProtectionMode	`.1.3.6.1.4.1.1271.2.2.3.0.14`	This notification is sent when the protection mode of the system changes to hot. A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
cienaCesModulePostErrorNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModulePOSTErrorDescription	`.1.3.6.1.4.1.1271.2.2.3.0.15`	This notification is sent when a module POST error is detected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModulePOSTErrorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and cienaCesModulePOSTErrorDescription.
cienaCesModuleFastReloadUnsuccessfulNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleAdminState cienaCesModuleOperState	`.1.3.6.1.4.1.1271.2.2.3.0.16`	This notification is sent when the deprov (cold switchover or failover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
cienaCesModuleHitlessModeUnsuccessfulNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleAdminState cienaCesModuleOperState	`.1.3.6.1.4.1.1271.2.2.3.0.17`	This notification is sent when the audit (hot failover or switchover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx	`.1.3.6.1.4.1.1271.2.2.3.0.18`	This notification is sent when the switch fabric detects a game-over failure and the system cannot automatically correct without resetting certain fabric subsystems. This kind of a disruption can cause a major service interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
cienaCesModuleSwitchFabricDisruptedRecoverableNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx	`.1.3.6.1.4.1.1271.2.2.3.0.19`	This notification is sent when the switch fabric detects game-over failure and the system can automatically correct it. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
cienaCesModuleHealthStatusUnknownNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleHealthOriginType cienaCesModuleHealthOriginName cienaCesModuleHealthOriginUnitId cienaCesModuleHealthCategory cienaCesModuleHealthSubCategory cienaCesModuleHealthStatus cienaCesModuleHealthStatusLast	`.1.3.6.1.4.1.1271.2.2.3.0.2`	This notification is sent whenever the Health Manager detects a status change to unknown. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
cienaCesModuleBladeInsertedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleModel cienaCesModuleSlotName	`.1.3.6.1.4.1.1271.2.2.3.0.20`	This notification is sent when a line module is inserted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleBladeInsertedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleModel and cienaCesModuleSlotName.
cienaCesModuleBladeRemovedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleModel cienaCesModuleSlotName	`.1.3.6.1.4.1.1271.2.2.3.0.21`	This notification is sent when a line module is removed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleBladeRemovedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleModel and cienaCesModuleSlotName.
cienaCesModuleSwitchFabricDisruptedRecoverableClrNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx	`.1.3.6.1.4.1.1271.2.2.3.0.22`	This notification is sent when the game-over failure is automatically corrected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
cienaCesModuleConfigEntryCreatedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleModel	`.1.3.6.1.4.1.1271.2.2.3.0.23`	This notification is sent when a line module configuration entry is created. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleConfigEntryCreatedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx, and cienaCesModuleModel.
cienaCesModuleConfigEntryDeletedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleModel	`.1.3.6.1.4.1.1271.2.2.3.0.24`	This notification is sent when a line module configuration entry is deleted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleConfigEntryDeletedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx, and cienaCesModuleModel.
cienaCesClockRateMismatchNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx	`.1.3.6.1.4.1.1271.2.2.3.0.25`	This notification is sent when it is discovered that clock rate is not same on all cards. This kind of error may affect traffic on the whole system and is a critical interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled The above value is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
cienaCesModuleIncompatibilityNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleModel	`.1.3.6.1.4.1.1271.2.2.3.0.26`	This notification is sent when it is discovered that module model is not compatible with current datapath mode. Such condition indicates that such configuration is not supported, may affect traffic and is a critical interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled The above value is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx and cienaCesModuleModel
cienaCesModuleLatchOpenNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleLatchLocation	`.1.3.6.1.4.1.1271.2.2.3.0.27`	This notification is sent when the ejector latch(es) on a module have been released, likely in preparation for module removal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled The above value is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx and cienaCesModuleLatchLocation
cienaCesModuleHealthStatusWarningNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleHealthOriginType cienaCesModuleHealthOriginName cienaCesModuleHealthOriginUnitId cienaCesModuleHealthCategory cienaCesModuleHealthSubCategory cienaCesModuleHealthStatus cienaCesModuleHealthStatusLast	`.1.3.6.1.4.1.1271.2.2.3.0.3`	This notification is sent whenever the Health Manager detects a status change to warning. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
cienaCesModuleHealthStatusFaultedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleHealthOriginType cienaCesModuleHealthOriginName cienaCesModuleHealthOriginUnitId cienaCesModuleHealthCategory cienaCesModuleHealthSubCategory cienaCesModuleHealthStatus cienaCesModuleHealthStatusLast	`.1.3.6.1.4.1.1271.2.2.3.0.4`	This notification is sent whenever the Health Manager detects a status change to faulted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
cienaCesModuleHealthStatusDegradedNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleHealthOriginType cienaCesModuleHealthOriginName cienaCesModuleHealthOriginUnitId cienaCesModuleHealthCategory cienaCesModuleHealthSubCategory cienaCesModuleHealthStatus cienaCesModuleHealthStatusLast	`.1.3.6.1.4.1.1271.2.2.3.0.5`	This notification is sent whenever the Health Manager detects a status change to degraded. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
cienaCesModuleHealthStatusGoodNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleHealthOriginType cienaCesModuleHealthOriginName cienaCesModuleHealthOriginUnitId cienaCesModuleHealthCategory cienaCesModuleHealthSubCategory cienaCesModuleHealthStatus cienaCesModuleHealthStatusLast	`.1.3.6.1.4.1.1271.2.2.3.0.6`	This notification is sent whenever the Health Manager detects a status change to normal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
cienaCesModuleSensorHighTempNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleSensorNotifIndx cienaCesModuleSensorDescription cienaCesModuleSensorCurrentTemp cienaCesModuleSensorHighTempThreshold	`.1.3.6.1.4.1.1271.2.2.3.0.7`	This notification is sent when the cienaCesModuleSensor temperature exceeds the high temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold.
cienaCesModuleSensorLowTempNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleSensorNotifIndx cienaCesModuleSensorDescription cienaCesModuleSensorCurrentTemp cienaCesModuleSensorLowTempThreshold	`.1.3.6.1.4.1.1271.2.2.3.0.8`	This notification is sent when the cienaCesModuleSensor falls below the low temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorLowTempThreshold.
cienaCesModuleSensorNormalTempNotification CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesModuleChassisNotifIndx cienaCesModuleShelfNotifIndx cienaCesModuleSlotNotifIndx cienaCesModuleSensorNotifIndx cienaCesModuleSensorDescription cienaCesModuleSensorCurrentTemp cienaCesModuleSensorLowTemp cienaCesModuleSensorHighTemp	`.1.3.6.1.4.1.1271.2.2.3.0.9`	This notification is sent if the cienaCesModule temperature changes from previously reported high or low temperature exceeding thresholds to normal temperature. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, and cienaCesModuleSensorHighTemp.