CAPWAP-DOT11-MIB

        Copyright (c) 2010 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
        
This version of this MIB module is part of RFC 5834;
see the RFC itself for full legal notices.
        
This MIB module contains managed object definitions for
CAPWAP Protocol binding for IEEE 802.11.
    
Source file
CAPWAP-DOT11-MIB
Last revised
Identity
capwapDot11MIB
Base OID
1.3.6.1.2.1.195
Imported Objects
CAPWAP-BASE-MIB CapwapBaseMacTypeTC CapwapBaseTunnelModeTC
IF-MIB ifIndex InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CAPWAP-DOT11-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CAPWAP-DOT11-MIB::capwapDot11MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAPWAP-DOT11-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAPWAP-DOT11-MIB::capwapDot11MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (17)
.1.3.6.1.2.1.195
.1.3.6.1.2.1.195.1
.1.3.6.1.2.1.195.1.1
.1.3.6.1.2.1.195.1.1.1
.1.3.6.1.2.1.195.1.1.1.1
.1.3.6.1.2.1.195.1.1.1.2
.1.3.6.1.2.1.195.1.1.1.3
.1.3.6.1.2.1.195.1.1.1.4
.1.3.6.1.2.1.195.1.1.1.5
.1.3.6.1.2.1.195.1.2
.1.3.6.1.2.1.195.1.2.1
.1.3.6.1.2.1.195.1.2.1.1
.1.3.6.1.2.1.195.1.2.1.2
.1.3.6.1.2.1.195.1.2.1.3
.1.3.6.1.2.1.195.2
.1.3.6.1.2.1.195.2.1
.1.3.6.1.2.1.195.2.2
Dependencies (13) 5 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (2)
Unsigned32 range: 1..512
Unsigned32 range: 1..16
Conformance Groups (2)
A collection of objects that is used to configure
the properties of a WLAN profile.
.1.3.6.1.2.1.195.2.1.1
A collection of objects that is used to bind the
WLAN profiles with a radio.
.1.3.6.1.2.1.195.2.1.2
Compliance Statements (1)

OID .1.3.6.1.2.1.195.2.2.1
Describes the requirements for conformance to the

CAPWAP-DOT11-MIB module.
Required groups