CAPWAP-BASE-MIB

        Copyright (c) 2010 IETF Trust and the persons identified as
authors of the code. All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
        
This version of this MIB module is part of RFC 5833;
see the RFC itself for full legal notices.
        
This MIB module contains managed object definitions for
the CAPWAP Protocol.
    
Source file
CAPWAP-BASE-MIB
Last revised
Identity
capwapBaseMIB
Base OID
1.3.6.1.2.1.196
Imported Objects
ENTITY-MIB PhysicalIndex
IF-MIB ifGeneralInformationGroup (no object page) InterfaceIndex
INET-ADDRESS-MIB InetAddress InetAddressType
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC DateAndTime PhysAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
SYSAPPL-MIB LongUtf8String
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CAPWAP-BASE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CAPWAP-BASE-MIB::capwapBaseMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAPWAP-BASE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAPWAP-BASE-MIB::capwapBaseMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (140)
.1.3.6.1.2.1.196
.1.3.6.1.2.1.196.0
.1.3.6.1.2.1.196.1
.1.3.6.1.2.1.196.1.1
Unsigned32
.1.3.6.1.2.1.196.1.1.1
.1.3.6.1.2.1.196.1.1.10
.1.3.6.1.2.1.196.1.1.10.1
.1.3.6.1.2.1.196.1.1.10.1.1
.1.3.6.1.2.1.196.1.1.10.1.2
.1.3.6.1.2.1.196.1.1.10.1.3
Unsigned32
.1.3.6.1.2.1.196.1.1.2
Unsigned32
.1.3.6.1.2.1.196.1.1.3
Unsigned32
.1.3.6.1.2.1.196.1.1.4
Bits
.1.3.6.1.2.1.196.1.1.5
Bits
.1.3.6.1.2.1.196.1.1.6
.1.3.6.1.2.1.196.1.1.9
.1.3.6.1.2.1.196.1.1.9.1
Unsigned32
.1.3.6.1.2.1.196.1.1.9.1.1
OctetString
.1.3.6.1.2.1.196.1.1.9.1.2
Unsigned32
.1.3.6.1.2.1.196.1.1.9.1.3
.1.3.6.1.2.1.196.1.1.9.1.4
.1.3.6.1.2.1.196.1.2
.1.3.6.1.2.1.196.1.2.1
.1.3.6.1.2.1.196.1.2.1.1
.1.3.6.1.2.1.196.1.2.1.1.1
OctetString
.1.3.6.1.2.1.196.1.2.1.1.10
OctetString
.1.3.6.1.2.1.196.1.2.1.1.11
Enumeration
.1.3.6.1.2.1.196.1.2.1.1.12
.1.3.6.1.2.1.196.1.2.1.1.13
.1.3.6.1.2.1.196.1.2.1.1.14
secondUnsigned32
.1.3.6.1.2.1.196.1.2.1.1.15
.1.3.6.1.2.1.196.1.2.1.1.16
.1.3.6.1.2.1.196.1.2.1.1.17
Enumeration
.1.3.6.1.2.1.196.1.2.1.1.18
.1.3.6.1.2.1.196.1.2.1.1.19
.1.3.6.1.2.1.196.1.2.1.1.2
.1.3.6.1.2.1.196.1.2.1.1.3
.1.3.6.1.2.1.196.1.2.1.1.4
OctetString
.1.3.6.1.2.1.196.1.2.1.1.5
OctetString
.1.3.6.1.2.1.196.1.2.1.1.6
.1.3.6.1.2.1.196.1.2.1.1.7
Enumeration
.1.3.6.1.2.1.196.1.2.1.1.8
OctetString
.1.3.6.1.2.1.196.1.2.1.1.9
.1.3.6.1.2.1.196.1.2.2
.1.3.6.1.2.1.196.1.2.2.1
.1.3.6.1.2.1.196.1.2.2.1.1
.1.3.6.1.2.1.196.1.2.2.1.2
.1.3.6.1.2.1.196.1.2.2.1.3
.1.3.6.1.2.1.196.1.2.2.1.4
.1.3.6.1.2.1.196.1.2.2.1.5
OctetString
.1.3.6.1.2.1.196.1.2.2.1.6
Enumeration
.1.3.6.1.2.1.196.1.2.2.1.7
.1.3.6.1.2.1.196.1.2.2.1.8
.1.3.6.1.2.1.196.1.2.2.1.9
.1.3.6.1.2.1.196.1.2.3
.1.3.6.1.2.1.196.1.2.3.1
.1.3.6.1.2.1.196.1.2.3.1.1
.1.3.6.1.2.1.196.1.2.3.1.2
OctetString
.1.3.6.1.2.1.196.1.2.3.1.3
.1.3.6.1.2.1.196.1.2.3.1.4
.1.3.6.1.2.1.196.1.2.3.1.5
Enumeration
.1.3.6.1.2.1.196.1.2.3.1.6
Unsigned32
.1.3.6.1.2.1.196.1.2.3.1.7
Unsigned32
.1.3.6.1.2.1.196.1.2.3.1.8
retransmissionsSNMPv2-SMICounter32
.1.3.6.1.2.1.196.1.2.3.1.9
.1.3.6.1.2.1.196.1.2.4
.1.3.6.1.2.1.196.1.2.4.1
.1.3.6.1.2.1.196.1.2.4.1.1
.1.3.6.1.2.1.196.1.2.4.1.2
Enumeration
.1.3.6.1.2.1.196.1.2.4.1.3
.1.3.6.1.2.1.196.1.2.5
.1.3.6.1.2.1.196.1.2.5.1
.1.3.6.1.2.1.196.1.2.5.1.1
.1.3.6.1.2.1.196.1.2.5.1.2
.1.3.6.1.2.1.196.1.2.5.1.3
.1.3.6.1.2.1.196.1.2.5.1.4
OctetString
.1.3.6.1.2.1.196.1.2.5.1.5
.1.3.6.1.2.1.196.1.2.6
.1.3.6.1.2.1.196.1.2.6.1
.1.3.6.1.2.1.196.1.2.6.1.1
.1.3.6.1.2.1.196.1.2.6.1.2
.1.3.6.1.2.1.196.1.2.6.1.3
.1.3.6.1.2.1.196.1.2.6.1.4
.1.3.6.1.2.1.196.1.2.6.1.5
.1.3.6.1.2.1.196.1.2.6.1.6
.1.3.6.1.2.1.196.1.2.6.1.7
Enumeration
.1.3.6.1.2.1.196.1.2.6.1.8
.1.3.6.1.2.1.196.1.2.7
.1.3.6.1.2.1.196.1.2.7.1
.1.3.6.1.2.1.196.1.2.7.1.1
.1.3.6.1.2.1.196.1.2.7.1.10
.1.3.6.1.2.1.196.1.2.7.1.11
Enumeration
.1.3.6.1.2.1.196.1.2.7.1.12
.1.3.6.1.2.1.196.1.2.7.1.2
.1.3.6.1.2.1.196.1.2.7.1.3
.1.3.6.1.2.1.196.1.2.7.1.4
.1.3.6.1.2.1.196.1.2.7.1.5
.1.3.6.1.2.1.196.1.2.7.1.6
.1.3.6.1.2.1.196.1.2.7.1.7
.1.3.6.1.2.1.196.1.2.7.1.8
.1.3.6.1.2.1.196.1.2.7.1.9
.1.3.6.1.2.1.196.1.3
.1.3.6.1.2.1.196.1.3.1
Enumeration
.1.3.6.1.2.1.196.1.3.10
.1.3.6.1.2.1.196.1.3.2
.1.3.6.1.2.1.196.1.3.3
.1.3.6.1.2.1.196.1.3.4
.1.3.6.1.2.1.196.1.3.5
.1.3.6.1.2.1.196.1.3.6
.1.3.6.1.2.1.196.1.3.7
secondUnsigned32
.1.3.6.1.2.1.196.1.3.8
secondUnsigned32
.1.3.6.1.2.1.196.1.3.9
.1.3.6.1.2.1.196.1.4
.1.3.6.1.2.1.196.1.4.1
.1.3.6.1.2.1.196.1.4.2
.1.3.6.1.2.1.196.1.5
.1.3.6.1.2.1.196.1.5.1
Enumeration
.1.3.6.1.2.1.196.1.5.10
Enumeration
.1.3.6.1.2.1.196.1.5.11
Enumeration
.1.3.6.1.2.1.196.1.5.12
.1.3.6.1.2.1.196.1.5.13
.1.3.6.1.2.1.196.1.5.2
.1.3.6.1.2.1.196.1.5.3
.1.3.6.1.2.1.196.1.5.4
Enumeration
.1.3.6.1.2.1.196.1.5.5
OctetString
.1.3.6.1.2.1.196.1.5.6
Enumeration
.1.3.6.1.2.1.196.1.5.7
Enumeration
.1.3.6.1.2.1.196.1.5.8
Enumeration
.1.3.6.1.2.1.196.1.5.9
.1.3.6.1.2.1.196.1.6
.1.3.6.1.2.1.196.1.6.1
.1.3.6.1.2.1.196.1.6.2
.1.3.6.1.2.1.196.1.6.3
.1.3.6.1.2.1.196.1.6.4
.1.3.6.1.2.1.196.1.6.5
.1.3.6.1.2.1.196.1.6.6
.1.3.6.1.2.1.196.1.6.7
.1.3.6.1.2.1.196.2
.1.3.6.1.2.1.196.2.1
.1.3.6.1.2.1.196.2.2
Dependencies (12) 8 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (8)
Enumeration
other(1)
clear(2)
x509(3)
psk(4)
Enumeration
data(1)
control(2)
Enumeration
localMAC(0)
splitMAC(1)
both(2)
Unsigned32 range: 1..31
OctetString range: 6range: 8
Bits
localBridging(0)
dot3Tunnel(1)
nativeTunnel(2)
OctetString range: 6range: 8
Unsigned32 range: 0..4096
Conformance Groups (18)
A collection of objects that is used to represent
the basic properties of the AC from the CAPWAP
protocol perspective.
.1.3.6.1.2.1.196.2.2.1
A collection of objects that is used to represent
the other properties (such as security) of the AC from
the CAPWAP protocol perspective.
.1.3.6.1.2.1.196.2.2.2
A collection of objects that is used to configure
the AC name list.
.1.3.6.1.2.1.196.2.2.3
A collection of objects that is used to configure
the stations ACL.
.1.3.6.1.2.1.196.2.2.4
A collection of objects that is used to configure
the WTP profile.
.1.3.6.1.2.1.196.2.2.5
A collection of optional objects that is used to
configure the WTP profile.
.1.3.6.1.2.1.196.2.2.6
A collection of objects that is used to represent
the WTP's state information.
.1.3.6.1.2.1.196.2.2.7
A collection of objects that is used to represent
the properties information for the WTPs in running state.
.1.3.6.1.2.1.196.2.2.8
A collection of optional objects that is used to represent
the properties of the WTPs in running state.
.1.3.6.1.2.1.196.2.2.9
A collection of objects that is used to represent
the wireless binding type and the mappings between the
ifIndexes of WLAN Virtual Radio Interfaces and PHY radios.
.1.3.6.1.2.1.196.2.2.10
A collection of objects that is used to represent
the stations' basic properties.
.1.3.6.1.2.1.196.2.2.11
A collection of objects that is used for collecting
WTP reboot count, link failure count, hardware failure
count, and so on.
.1.3.6.1.2.1.196.2.2.12
A collection of objects that is used for collecting
radio reset count, channel change count, hardware failure
count, and so on
.1.3.6.1.2.1.196.2.2.13
Objects used for the CAPWAP protocol's parameters.
.1.3.6.1.2.1.196.2.2.14
Objects used for collecting the CAPWAP protocol's statistics.
.1.3.6.1.2.1.196.2.2.15
A collection of notifications in this MIB module.
.1.3.6.1.2.1.196.2.2.16
Objects used for notifications.
.1.3.6.1.2.1.196.2.2.17
Objects used to enable or disable notifications.
.1.3.6.1.2.1.196.2.2.18
Compliance Statements (1)

OID .1.3.6.1.2.1.196.2.1.1
Describes the requirements for conformance to the
CAPWAP-BASE-MIB module.
Required groups
mandatory IF-MIB::ifGeneralInformationGroup
mandatory capwapBaseAcNodeGroup
mandatory capwapBaseWtpProfileGroup
mandatory capwapBaseWtpStateGroup
mandatory capwapBaseWtpGroup
mandatory capwapBaseRadioGroup
mandatory capwapBaseStationGroup
optional capwapBaseAcNodeGroup2 The capwapBaseAcNodeGroup2 group is optional.
optional capwapBaseAcNameListGroup The capwapBaseAcNameListGroup group is optional.
optional capwapBaseMacAclsGroup The capwapBaseMacAclsGroup group is optional.
optional capwapBaseWtpProfileGroup2 The capwapBaseWtpProfileGroup2 group is optional.
optional capwapBaseWtpGroup2 The capwapBaseWtpGroup2 group is optional.
optional capwapBaseWtpEventsStatsGroup The capwapBaseWtpEventsStatsGroup group is optional.
optional capwapBaseRadioEventsStatsGroup The capwapBaseRadioEventsStatsGroup group is optional.
optional capwapBaseParametersGroup The capwapBaseParametersGroup group is optional.
optional capwapBaseStatsGroup The capwapBaseStatsGroup group is optional.
optional capwapBaseNotificationsGroup The capwapBaseNotificationsGroup group is optional.
optional capwapBaseNotifyVarsGroup The capwapBaseNotifyVarsGroup group is optional.
If capwapBaseNotificationsGroup is supported,
this group must be implemented.
optional capwapBaseNotifyControlGroup The capwapBaseNotifyControlGroup group is optional.
If capwapBaseNotificationsGroup is supported,
this group must be implemented.
Notifications / Traps (8)
NameOIDDescription
.1.3.6.1.2.1.196.0.1
This notification is sent by the AC when a CAPWAP channel
is established.
The notification is separated for data or control channel.
.1.3.6.1.2.1.196.0.2
This notification is sent by the AC when a CAPWAP channel
is down.
The notification is separated for data or control channel.
.1.3.6.1.2.1.196.0.3
This notification is generated when a WTP has had a
decryption error since the last report.
.1.3.6.1.2.1.196.0.4
This notification is generated when a WTP fails to join.
.1.3.6.1.2.1.196.0.5
This notification is generated when a WTP fails to update
the firmware image.
.1.3.6.1.2.1.196.0.6
This notification is generated when a WTP receives message
elements in the configuration management messages that it
is unable to apply locally.
.1.3.6.1.2.1.196.0.7
The notification is generated when a radio's operational state
has changed.
.1.3.6.1.2.1.196.0.8
This is notification of an authentication failure event
and provides the reason for it.