CADANT-REMOTE-QUERY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

cadCmRemoteQueryStatusTable

table
.1.3.6.1.4.1.4998.1.1.55.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadCmRemoteQueryStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-REMOTE-QUERY-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-REMOTE-QUERY-MIB::cadCmRemoteQueryStatusTable' 
This table contains the status of the cable modems that 
are polled by the CMTS CM Poller. The information will be 
overwritten when a new polling cycle starts.
          
Depending on how many CMs that the poller is polling, 
polling this table constantly can be quite expensive; 
Excessive polling could degrade performance.
cadCmRemoteQueryStatusEntry row .1.3.6.1.4.1.4998.1.1.55.1.2.1
A list of the cable modem's attributes
that are polled by a CMTS.
Indexes
No indexes recorded
Column Syntax OID
cadCmRemoteQueryPollTime
The value of sysUpTime when this CM entry was polled.

If this value is larger than the cadCmRemoteQueryPollerStopTime,
it indicates that the status has already been
overwritten by a new polling cycle. …
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.55.1.2.1.1
cadCmRemoteQueryDownChannelPower
The CM's received power level. This object
may be set to zero if the CM does not support
power level measurement.

If the CM downstream interface is down, this object
either returns the most current valu…
dBmVDOCS-IF-MIBTenthdBmV .1.3.6.1.4.1.4998.1.1.55.1.2.1.2
cadCmRemoteQueryStatusTxPower
The operational transmit power for the CM upstream
channel.
dBmVDOCS-IF-MIBTenthdBmV .1.3.6.1.4.1.4998.1.1.55.1.2.1.3
cadCmRemoteQueryUpChnlTxTimingOffset
A measure of the current round trip time. Used for
timing of CM upstream transmissions to ensure
synchronized arrivals at the CMTS.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.55.1.2.1.4
cadCmRemoteQuerySigQSignalNoise
Signal/Noise ratio as perceived for the CM downstream
channel.
dBDOCS-IF-MIBTenthdB .1.3.6.1.4.1.4998.1.1.55.1.2.1.5
cadCmRemoteQuerySigQMicroreflections
Total microreflections including in-channel
response as perceived on the CM downstream,
measured in dBc below the signal level.

This object is not assumed to return an absolutely
accurate value, but is …
dBcInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4998.1.1.55.1.2.1.6
cadCmRemoteQuerySysDescr
A textual description of the entity.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.4998.1.1.55.1.2.1.7