BIANCA-BRICK-SIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
60

voipSipProviderTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.10 · 1 row entry · 17 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipProviderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipProviderTable'
Contains SIP specific provider account data.
voipSipProviderEntry row .1.3.6.1.4.1.272.4.33.6.10.1
Describes a SIP specific provider account entry.
Column Syntax OID
Unique table index of this entry. This value cannot be edited
or changed. This value is identical to 'Index' number of
parent entry in voipProviderTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.10.1.1
SIP outbound proxy. This value is set if provider uses an
outbound proxy for communication.
r/w .1.3.6.1.4.1.272.4.33.6.10.1.2
Authentication ID for provider (only sometimes used).
This value is set if the authentication ID differs from the
setting of 'Account' in voipProviderTable.
r/w .1.3.6.1.4.1.272.4.33.6.10.1.3
Transport protocol used by connection.
Enumerationr/w
Enumerated Values:
1udp
2tcp
3sips
.1.3.6.1.4.1.272.4.33.6.10.1.4
Expire time for registration retransmission.

Default value is 600.
Integer32r/w
Constraints:
range: 0-38400
.1.3.6.1.4.1.272.4.33.6.10.1.5
Switch between dynamic or static mode. In dynamic mode a
REGISTER (SIP message) is sent before expire time is reached.
In static mode no REGISTER is send. In this case communication
is fixied between two endpoints witho…
Enumerationr/w
Enumerated Values:
1off
2on
.1.3.6.1.4.1.272.4.33.6.10.1.6
Supported codecs of provider. Set one or more of the following
bit values:

ulaw (1),
alaw (2),
g729 (4),
g726 (8),
g726_16 (16),
g726_32 (32),
g726_40 (64),
g728 (128…
r/w .1.3.6.1.4.1.272.4.33.6.10.1.7
Codec signalling order:

'default' -> system default order,
'quality' -> highest quality first,
'lowest' -> lowest bandwith first,
'highest' -> highest bandwith first.

Default value is defa…
Enumerationr/w
Enumerated Values:
1default
2quality
3lowest
4highest
.1.3.6.1.4.1.272.4.33.6.10.1.8
Audio data (payload) duration per packet in milliseconds (for
all codecs).

Default value is 20.
Integer32r/w
Constraints:
range: 5-500
.1.3.6.1.4.1.272.4.33.6.10.1.9
DSP options:

'none' -> neither echo cancellation nor comfort noise,
'echo' -> echo cancellation,
'cng' -> comfort noise generation,
'both' -> echo and comfort noise.

Default value is both.
Enumerationr/w
Enumerated Values:
1none
2echo
3cng
4both
.1.3.6.1.4.1.272.4.33.6.10.1.10
Realm of the provider (only sometimes used). Normally the URL
after the '@' of the username is used for all entries using
provider's domain name. In some cases this value differs.
So at authentication and other cases th…
r/w .1.3.6.1.4.1.272.4.33.6.10.1.11
Here a specific session timeout can be set. It is similar to a
keep alive polling between the Mediagateway and the registrar
in order to detect a dead RTP session. The default is '0'
(disabled). In RFC minimum time is 9…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.10.1.12
Set trunk DDI (direct dial in) mode for provider entry:

'off' -> Normal mode with single number account;
'client' -> The gateway is DDI client;
'server' -> The gateway is in server mode. So DDI c…
Enumerationr/w
Enumerated Values:
1off
2client
3server
4gw-trunk
.1.3.6.1.4.1.272.4.33.6.10.1.16
The field in the SIP header which is used in order to indicate
the caller's identity to connected clients. The needed method
is provider dependent. Possible methods are:

'off' -> anonymous mode;
'…
Enumerationr/w
Enumerated Values:
1off
2disp
3user
4disp-user
5ppi
6pai
.1.3.6.1.4.1.272.4.33.6.10.1.17
In case of 'DDIMode' = 'server' a specific subscriber (network)
number can be given here. This has the same meaning as the
subscriber number in ISDN PP configuration. For other 'DDIMode'
configurations this parameter do…
r/w .1.3.6.1.4.1.272.4.33.6.10.1.20
The field in the SIP INVITE message where the call
destination's identity is transfered. The needed method is
provider dependent. All informations are located in the 'TO:'
header:

'auto' -> check DISP…
Enumerationr/w
Enumerated Values:
1auto
2user
3display
.1.3.6.1.4.1.272.4.33.6.10.1.22
Field used for account specific features:
BIT0: HAS_MCID Malicious Call Identification
BIT1: HAS_CLID always display number (if available), ignore
presentation
BIT2: HAS_FAXREDIR Redirect an i…
r/w .1.3.6.1.4.1.272.4.33.6.10.1.23

voipSipExtensionTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.12 · 1 row entry · 13 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipExtensionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipExtensionTable'
Contains specific parameters for an internal SIP account.
voipSipExtensionEntry row .1.3.6.1.4.1.272.4.33.6.12.1
Contains an internal SIP account assigned to a
voipExtensionTable entry.
Column Syntax OID
This is the reference to the main 'Index' of the parent entry
configured in voipExtensionTable. This value cannot be
modified and is only set in the trap handler of the
Mediagateway.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.272.4.33.6.12.1.1
SIP identifier (auth-ID) for REGISTER (normally the same as
'Number' in voipExtensionTable). This value must be set if a
different URL for account and authentication is used.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.272.4.33.6.12.1.2
SIP account password for registration.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.272.4.33.6.12.1.3
Field used for extension specific features:
BIT0: HAS_MCID Malicious Call Identification
BIT1: HAS_CLID always display number (if available), ignore
presentation
BIT2: HAS_FAXREDIR Redirect an…
r/w .1.3.6.1.4.1.272.4.33.6.12.1.4
Expire time of a connected SIP terminal. In registration mode
terminal has to reregister before this timer expires.
Without reregistration within this timeframe terminal will be
disconected after this period.
Integer32r/w
Constraints:
range: 0-3600
.1.3.6.1.4.1.272.4.33.6.12.1.5
Supported codecs of extension. Set one or more of following
bit values:

ulaw (1),
alaw (2),
g729 (4),
g726 (8),
g726_16 (16),
g726_32 (32),
g726_40 (64),
g728 (128),
g723_63 (256)…
r/w .1.3.6.1.4.1.272.4.33.6.12.1.6
Codec signalling order:

'default' -> system default order,
'quality' -> highest quality first,
'lowest' -> lowest bandwith first,
'highest' -> highest bandwith first.
Enumerationr/w
Enumerated Values:
1default
2quality
3lowest
4highest
.1.3.6.1.4.1.272.4.33.6.12.1.7
Audio data (payload) duration per packet in milliseconds (for
all codecs).

Default value is 20.
Integer32r/w
Constraints:
range: 5-500
.1.3.6.1.4.1.272.4.33.6.12.1.8
DSP options:

'none' -> neither echo cancellation nor comfort noise,
'echo' -> echo cancellation,
'cng' -> comfort noise generation,
'both' -> echo and comfort noise.

Default value is both.
Enumerationr/w
Enumerated Values:
1none
2echo
3cng
4both
.1.3.6.1.4.1.272.4.33.6.12.1.9
Transport protocol used by connected terminal.

Default value is udp.
Enumerationr/w
Enumerated Values:
1udp
2tcp
3sips
.1.3.6.1.4.1.272.4.33.6.12.1.10
IP Port used by connected terminal. Normally 5060, but in most
terminals this port can be configured.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.272.4.33.6.12.1.11
This options is only used for special cases. Normally this has
to be empty. However if no client registration is done by the
connected terminal this parameter has to be set to the IP
address of the connected terminal. W…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.272.4.33.6.12.1.12
Here a specific RTP session timeout in seconds can be set. It
is similar to a keep alive polling between the Mediagateway and
a SIP client in order to detect a dead RTP session. A value of
0 disables the timeout. In RFC…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.12.1.13

voipSipRouteTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.13 · 1 row entry · 10 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipRouteTable'
Contains call routing informations.
voipSipRouteEntry row .1.3.6.1.4.1.272.4.33.6.13.1
Describes a call routing entry.
Column Syntax OID
Call destination address (e.g. telephone number or SIP account)
that is affected by this call routing entry.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.272.4.33.6.13.1.1
User defined description of this call routing entry.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.272.4.33.6.13.1.2
This parameter defines a translation rule for call addresses
(such as telephone numbers). This translation rule is applied
to the caller's number for 'RouteType' = 'clid' and to call
destination number for 'RouteType' =…
OctetStringr/w
Constraints:
range: 0-100
.1.3.6.1.4.1.272.4.33.6.13.1.3
Unique index of this entry.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.13.1.4
Main type of this entry:

'external' -> describes a routing entry to an external route
(carrier);
'trunk' -> describes a routing entry to an internal route
(sub-PBX);
'deny' -> decribes an entry…
Enumerationr/w
Enumerated Values:
1external
2trunk
3deny
9clid
.1.3.6.1.4.1.272.4.33.6.13.1.5
Administrative status:

'enable' -> Routing entry is used for call routing
decissions;
'disable' -> Ignore this call routing entry.

Deafult value is enable.
Enumerationr/w
Enumerated Values:
1enable
2disable
8delete
.1.3.6.1.4.1.272.4.33.6.13.1.6
Table index number of a source (interface) of a call (which
triggers this call routing entry). That can be either a
caller's ISDN or analog device (on this gateway), a
voipSipLineTable entry or a SIP provider account. I…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.13.1.7
Table index number of an interface used for dialling out a
call affected by this rule.

That can be either a ISDN or analog interface (on this
gateway), a voipSipLineTable entry or a SIP provider account.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.13.1.8
Call source address (e.g. telephone number or SIP account)
that is affected by this call routing entry.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.272.4.33.6.13.1.9
Table index in voipSipDialTable of the first entry in a list
which is used by this call route entry. This entry point
parameter can only be set in case of 'Type' = 'external'. For
all other types this parameter has to b…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.13.1.10

voipSipLineTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.15 · 1 row entry · 4 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipLineTable'
Contains ISDN line bundle entries.
voipSipLineEntry row .1.3.6.1.4.1.272.4.33.6.15.1
Describes an ISDN bundle definition entry.
Column Syntax OID
Unique index (interface index) of entry.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.15.1.1
User defined description of line bundle.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.15.1.2
The mode of the bundle:

'external' -> bundle contains only TE PP ISDN ports;
'trunk' -> bundle contains only NT PP ISDN ports;
'delete' -> delete entry.

Deafult value is external.
Enumerationr/w
Enumerated Values:
1external
2trunk
8delete
.1.3.6.1.4.1.272.4.33.6.15.1.3
Bitmask with those bits set to 1 for all ISDN interfaces used
by this bundle entry. The corresponding ISDN interfaces can be
found in isdnStkTable entries with 'isdnStkNumber' equal to
bit position of set bits here.
r/w .1.3.6.1.4.1.272.4.33.6.15.1.4

voipSipAliasTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.16 · 1 row entry · 7 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipAliasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipAliasTable'
Contains call number translation rules.
voipSipAliasEntry row .1.3.6.1.4.1.272.4.33.6.16.1
Describes a call number translation entry.
Column Syntax OID
Unique index of entry.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.16.1.1
User defined description of entry.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.16.1.2
Administrative status of this call number translation entry:

'enable' -> The entry is enabled;
'disable' -> The entry is disabled.

Default value is enable.
Enumerationr/w
Enumerated Values:
1enable
2disable
8delete
.1.3.6.1.4.1.272.4.33.6.16.1.3
Local/internal number of an extension.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.16.1.4
External number of the same extension as referenced by
'Local'.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.16.1.5
Defines for which call directions this call number translation
entry is checked:

'incoming' -> entry is checked only for incoming calls;
'outgoing' -> entry is checked only for outgoing calls;
'both' …
Enumerationr/w
Enumerated Values:
1incoming
2outgoing
3both
.1.3.6.1.4.1.272.4.33.6.16.1.6
Table index number of an outgoing/incoming
interface/account/line of a call (which triggers this call
translation entry). That can be either a caller's ISDN or
analog interface (on this gateway), a voipSipLineTable entr…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.16.1.7

voipSipShortcutTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.17 · 1 row entry · 4 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipShortcutTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipShortcutTable'
Contains shortcut (speed dial) definitions.
voipSipShortcutEntry row .1.3.6.1.4.1.272.4.33.6.17.1
Describes a shortcut (speed dial) entry.
Column Syntax OID
The administration status of the shortcut entry:

'enable' -> the entry is active;
'disable' -> the entry is ignored;
'delete' -> delete the entry.

Default value is enable.
Enumerationr/w
Enumerated Values:
1enable
2disable
8delete
.1.3.6.1.4.1.272.4.33.6.17.1.1
User defined description of entry.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.17.1.2
Shortcut code. Note that no additional '*' is entered in
this variable. The additional '*' a user has to dial in order
to indicate a shortcut is automatically prefixed by the
system.
OctetStringr/w
Constraints:
range: 0-10
.1.3.6.1.4.1.272.4.33.6.17.1.3
Replacement string for shortcut. May be any sequence of
characters and numbers.

Example: 'Code' is 30; 'Replace' is 003059876. So if you
dial *30345 the dialed number is 003059876345.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.272.4.33.6.17.1.4

voipSipDialTable

table mandatory
.1.3.6.1.4.1.272.4.33.6.18 · 1 row entry · 5 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk voipSipDialTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BIANCA-BRICK-SIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BIANCA-BRICK-SIP-MIB::voipSipDialTable'
Contains lists of (backup) dial entries.
voipSipDialEntry row .1.3.6.1.4.1.272.4.33.6.18.1
Contains the elements of a (backup) dial entry.
Column Syntax OID
Unique index of entry.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.18.1.1
Administrative status for dial/backup entry:

'enable' -> the entry is active;
'disable' -> the entry will be ignored.

Deafult value is enable.
Enumerationr/w
Enumerated Values:
1enable
2disable
3new
8delete
.1.3.6.1.4.1.272.4.33.6.18.1.2
Manipulation rule for dialed number. The string format of a
manipulation rule is '<x:y>' (lenghts of strings x and y
can vary). A rule entry can contain multiple manipulation rules
separated by ';'. The best matching ma…
OctetStringr/w
Constraints:
range: 0-100
.1.3.6.1.4.1.272.4.33.6.18.1.3
Table index number of an interface/account/line used for
dialing. That can be either a caller's ISDN or analog interface
(on this gateway), a voipSipLineTable entry or a SIP provider
account. For table index number rang…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.18.1.4
Next dial entry in the priority list. If the connection failed
with a provider error, the entry refrenced by this index is
used for next dial attempt. So unlimited routes can be created
and sorted to user defined fallba…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.272.4.33.6.18.1.5