AricentMIVlan-MIB Table View

List of per virtual context Vlan Module Parameters.

fsMIDot1qFutureVlanGlobalsEntry row .1.3.6.1.4.1.2076.120.1.2.1

Per virtual context Vlan module parmaters.

Indexes

fsMIDot1qFutureVlanContextId

Column	Syntax	OID
fsMIDot1qFutureVlanContextId Identifies the virtual context in the system.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.2.1.1
fsMIDot1qFutureVlanStatus The administrative status requested by management for the Vlan feature. The value enabled(1) indicates that Vlan should be enabled in the device on all ports. The value disabled(2) indicates that Vlan should be disa…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.2
fsMIDot1qFutureVlanMacBasedOnAllPorts This object is only used to enable/disable the mac based type on all ports of fsMIDot1qFutureVlanPortMacBasedClassification	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.3
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts This object is only used to enable/disable the port protocol based type on all ports of fsMIDot1qFutureVlanPortPortProtoBasedClassification	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.4
fsMIDot1qFutureVlanShutdownStatusdeprecated The administrative shutdown status requested by management for Vlan The value true(1) indicates that Vlan should be shutdown in the device on all ports. All memory will be released. The value false(2) indicates tha…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.2.1.5
fsMIDot1qFutureGarpShutdownStatus The administrative status requested by management for GARP The value true(1) indicates that GARP should be shutdown in the device on all ports. All memory will be released. The value false(2) indicates that GARP sh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.2.1.6
fsMIDot1qFutureVlanDebug Enables the tracing in the selected submodule in VLAN. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - M…	Integer32r/w Constraints: range: 0-524287	.1.3.6.1.4.1.2076.120.1.2.1.7
fsMIDot1qFutureVlanLearningMode The Type of VLAN learning mode. When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unicast configurations associated with old fid will get deleted.	Enumerationr/w Enumerated Values: 1 ivl 2 svl 3 hybrid	.1.3.6.1.4.1.2076.120.1.2.1.8
fsMIDot1qFutureVlanHybridTypeDefault The default learning mode of the switch if fsMIDot1qFutureVlanLearningMode is hvl (3). When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unicast …	Enumerationr/w Enumerated Values: 1 ivl 2 svl	.1.3.6.1.4.1.2076.120.1.2.1.9
fsMIDot1qFutureVlanOperStatus The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates that Vlan module is currently disabled in the device.	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.10
fsMIDot1qFutureGvrpOperStatus The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates that GVRP module is currently disabled in the device.	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.11
fsMIDot1qFutureGmrpOperStatus The operational status of the GMRP module. The value enabled(1) indicates that GMRP module is currently enabled in the device. The value disabled(2) indicates that GMRP module is currently disabled in the device.	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.12
fsMIDot1qFutureVlanContextName The name of the virtual context.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2076.120.1.2.1.13
fsMIDot1qFutureGarpDebug Enables the tracing in the selected submodule in GARP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - M…	Integer32r/w Constraints: range: 0-1048575	.1.3.6.1.4.1.2076.120.1.2.1.14
fsMIDot1qFutureUnicastMacLearningLimit The Limiting value on the number of distinct unicast MAC addresses that can be learnt in the specified virtual context. The upper limit value that can be SET for this object is determined by the underlyi…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2076.120.1.2.1.15
fsMIDot1qFutureBaseBridgeMode This object indicates Base Bridge-Mode of the Switch. Setting the value to transparent mode will make switch behave according to IEEE 802.1d implementation. Setting the value to VLAN mode will make switch behave accordi…	Enumerationr/w Enumerated Values: 1 dot1dTransparentMode 2 dot1qVlanMode	.1.3.6.1.4.1.2076.120.1.2.1.16
fsMIDot1qFutureVlanSubnetBasedOnAllPorts This object is used to enable/disable the subnet based VLAN Classification on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting this object to enable/disable status, Subnet based VLAN classification …	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.17
fsMIDot1qFutureVlanGlobalMacLearningStatus This object specifies the global MAC learning status of the switch. The default value of global mac learning status of the switch is enabled. This object can take only two values enabled or disabled. The value as speci…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.2.1.18
fsMIDot1qFutureVlanApplyEnhancedFilteringCriteria If this object is set as 'false', then only default filtering utility criteria will be applied on all ports in this context. Otherwise the filtering criteria to be used for the ports in this context will be taken from f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.2.1.19
fsMIDot1qFutureVlanGlobalsFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses in this context are removed.After flush this object is set to 'false'	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.2.1.20
fsMIDot1qFutureVlanUserDefinedTPID This object sets the value for the user defined TPID configurable for an Ingress port or for a VLAN Egress Ethertype. A value ZERO deletes the configured entry.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.2.1.21
fsMIDot1qFutureVlanRemoteFdbFlush If this object is set as 'true', then all the MAC addresses learnt from remote MC-LAG node will be removed. After flush, this object is reset to 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.2.1.22
fsMIDot1qFutureRSPANRsvdVlanList This object identifies the list of VLANs that are reserved for RSPAN feature. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet corresponds to VLANs 9 through 16 etc. …	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2076.120.1.2.1.23

Table containing the port type information.

fsMIDot1qFutureVlanPortEntry row .1.3.6.1.4.1.2076.120.1.3.1

Entry indicating the type of the port.

Indexes

fsMIDot1qFutureVlanPort

Column	Syntax	OID
fsMIDot1qFutureVlanPort The port number of the port for which this entry applies.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2076.120.1.3.1.1
fsMIDot1qFutureVlanPortType The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk port, port is added as member of all the existing Vlans an…	Enumerationr/w Enumerated Values: 1 accessPort 2 trunkPort 3 hybridPort 4 hostPort 5 promiscuousPort	.1.3.6.1.4.1.2076.120.1.3.1.2
fsMIDot1qFutureVlanPortMacBasedClassification Object to expilicitly enable/disable the Mac based Classification on port. This can be independently set without any dependency in available configuration of fsMIDot1qFutureVlanMacBasedOnAllPorts	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.3.1.3
fsMIDot1qFutureVlanPortPortProtoBasedClassification Object to expilicitly enable/disable the port and protocol Classification on port. This can be independently set without any dependency in available configuration of fsMIDot1qFutureVlanPortProtoBasedOnAllPorts	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.3.1.4
fsMIDot1qFutureVlanFilteringUtilityCriteria Based on this object, learning on a port is decided. If default filtering utility Criteria is selected on a port, then learning of source mac from a received packet on that port will be done only if there…	Enumerationr/w Enumerated Values: 1 default 2 enhanced	.1.3.6.1.4.1.2076.120.1.3.1.5
fsMIDot1qFutureVlanPortProtected The Split Horizon property of the port. If set to true, frames that are received on any other port, that has the same property set to true, will not be forwarded on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.3.1.6
fsMIDot1qFutureVlanPortSubnetBasedClassification Object to expilicitly enable/disable the Subnet based Vlan Classification on port. This can be independently set without any dependency in available configuration of dot1qFutureVlanSubnetBasedOnAllPorts. This object i…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.3.1.7
fsMIDot1qFutureVlanPortUnicastMacLearning A Truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, no unicast mac entry will be learnt on this port. When Mac Learning is enabled, unicast m…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.3.1.8
fsMIDot1qFutureVlanPortGmrpJoinEmptyTxCount Number of Gmrp Join Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.9
fsMIDot1qFutureVlanPortGmrpJoinEmptyRxCount Number of Gmrp Join Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.10
fsMIDot1qFutureVlanPortGmrpJoinInTxCount Number of Gmrp Join In packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.11
fsMIDot1qFutureVlanPortGmrpJoinInRxCount Number of Gmrp Join In packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.12
fsMIDot1qFutureVlanPortGmrpLeaveInTxCount Number of Gmrp Leave In packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.13
fsMIDot1qFutureVlanPortGmrpLeaveInRxCount Number of Gmrp Leave In packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.14
fsMIDot1qFutureVlanPortGmrpLeaveEmptyTxCount Number of Gmrp Leave Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.15
fsMIDot1qFutureVlanPortGmrpLeaveEmptyRxCount Number of Gmrp Leave Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.16
fsMIDot1qFutureVlanPortGmrpEmptyTxCount Number of Gmrp Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.17
fsMIDot1qFutureVlanPortGmrpEmptyRxCount Number of Gmrp Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.18
fsMIDot1qFutureVlanPortGmrpLeaveAllTxCount Number of Gmrp Leave All packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.19
fsMIDot1qFutureVlanPortGmrpLeaveAllRxCount Number of Gmrp Leave All packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.20
fsMIDot1qFutureVlanPortGmrpDiscardCount Number of Gmrp packets discarded in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.21
fsMIDot1qFutureVlanPortGvrpJoinEmptyTxCount Number of Gvrp Join Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.22
fsMIDot1qFutureVlanPortGvrpJoinEmptyRxCount Number of Gvrp Join Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.23
fsMIDot1qFutureVlanPortGvrpJoinInTxCount Number of Gvrp Join In packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.24
fsMIDot1qFutureVlanPortGvrpJoinInRxCount Number of Gvrp Join In packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.25
fsMIDot1qFutureVlanPortGvrpLeaveInTxCount Number of Gvrp Leave In packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.26
fsMIDot1qFutureVlanPortGvrpLeaveInRxCount Number of Gvrp Leave In packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.27
fsMIDot1qFutureVlanPortGvrpLeaveEmptyTxCount Number of Gvrp Leave Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.28
fsMIDot1qFutureVlanPortGvrpLeaveEmptyRxCount Number of Gvrp Leave Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.29
fsMIDot1qFutureVlanPortGvrpEmptyTxCount Number of Gvrp Empty packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.30
fsMIDot1qFutureVlanPortGvrpEmptyRxCount Number of Gvrp Empty packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.31
fsMIDot1qFutureVlanPortGvrpLeaveAllTxCount Number of Gvrp Leave All packets transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.32
fsMIDot1qFutureVlanPortGvrpLeaveAllRxCount Number of Gvrp Leave All packets received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.33
fsMIDot1qFutureVlanPortGvrpDiscardCount Number of Gvrp packets discarded in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.3.1.34
fsMIDot1qFutureVlanPortFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses on the specified interface are removed. After flush this object is set to 'false'	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.3.1.35
fsMIDot1qFutureVlanPortIngressEtherType In Customer Bridge mode this object indicates the primary C-VLAN tag ether type used for the packets received on this port. Packets received on a port are considered tagged, when the packet ethertype matches with the po…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2076.120.1.3.1.36
fsMIDot1qFutureVlanPortEgressEtherType In Customer Bridge Mode, this object indicates the ether type of the C-VLAN tag that has to be applied for all the outgoing packets on this port. If a valid value is in this object, all the packets which are outgoing on…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2076.120.1.3.1.37
fsMIDot1qFutureVlanPortEgressTPIDType This object defines the Egress TPID type for a Port. If the value is portbased(1) the egress TPID of the packet is selected from Egress Port Table. When the value is vlanbased(2) the Egress TPID is select…	Enumerationr/w Enumerated Values: 1 portbased 2 vlanbased	.1.3.6.1.4.1.2076.120.1.3.1.38
fsMIDot1qFutureVlanPortAllowableTPID1 This object indicates the secondary ether type that is allowable for a port. The configurable values for this object are either 0x8100 or 0x88a8. Setting this MIB object is applicable only for hardware. …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.3.1.39
fsMIDot1qFutureVlanPortAllowableTPID2 This object indicates the standard ether type that is allowable for a port. The configurable value for this object is Q-in-Q EtherType [0x9100]. Setting this MIB object is applicable only for hardware. Wh…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.3.1.40
fsMIDot1qFutureVlanPortAllowableTPID3 This object indicates the additional user defined ether type that is allowable for a port. The value for this object is set by the fsMIDot1qFutureVlanUserDefinedTPID MIB. Setting this MIB object is applic…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.3.1.41
fsMIDot1qFutureVlanPortClearGarpStats Setting a value of 'true' in this object, resets all GVRP & GMRP statistics counter values to zero. After resetting the statistics counter values, the value of this object automatically switches back to 'false'. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.3.1.42
fsMIDot1qFutureVlanPortUnicastMacSecType This object identifies the MA Table Address Type for this port sav - security is sav, strict is FALSE Only unknown MAC is treated as violation on all security configured ports. shv - security …	Enumerationr/w Enumerated Values: 1 sav 2 shv 3 off	.1.3.6.1.4.1.2076.120.1.3.1.43
fsMIDot1qFutureVlanPortStVlanList This object identifies the list of VLANs in which this egress port is added as static member. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet corresponds to VLANs 9 t…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2076.120.1.3.1.44
fsMIDot1qFutureVlanPortStUntaggedVlan This object identifies the VLAN in which this egress port is added as untagged member port. The same object is used to set / reset the port membership to the untagged VLAN. The untagged VLA…	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2076.120.1.3.1.45
fsMIDot1qFuturePortPacketReflectionStatus Port Packet Reflection feature allows switching of packets received on an ingress port back on the same port on which packet was received, if the MAC Destination Address is on the same port. The default behavior of th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.3.1.46
fsMIDot1qFutureVlanPortTypeStatic The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk port, port is added as member of all the ex…	Enumeration Enumerated Values: 1 accessPort 2 trunkPort 3 hybridPort 4 hostPort 5 promiscuousPort	.1.3.6.1.4.1.2076.120.1.3.1.47

A table that contains information on Vlan-MAC address 
mapping. This table maintains context ID as one more 
index to support Multiple Instances.

fsMIDot1qFutureVlanPortMacMapEntry row .1.3.6.1.4.1.2076.120.1.4.1

Entry that contains Vlan-MAC address mapping.

Indexes

fsMIDot1qFutureVlanPort fsMIDot1qFutureVlanPortMacMapAddr

Column	Syntax	OID
fsMIDot1qFutureVlanPortMacMapAddr The Mac address for which the Vlan mapping is present in the entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.120.1.4.1.1
fsMIDot1qFutureVlanPortMacMapVid The Vlan to which the mac address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.120.1.4.1.2
fsMIDot1qFutureVlanPortMacMapName The name given to the mac-vlan entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2076.120.1.4.1.3
fsMIDot1qFutureVlanPortMacMapMcastBcastOption Configurable option for discarding/allowing Multicast/Broadcast Untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source Mac address as in the Mac Vlan entry will be dropped if mac base…	Enumerationr/w Enumerated Values: 1 allow 2 supress	.1.3.6.1.4.1.2076.120.1.4.1.4
fsMIDot1qFutureVlanPortMacMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.120.1.4.1.5

This table contains information about the Filtering database 
identifier (FID) used by vlan's to make forwarding decisions. Vlan's 
can be mapped to use the same FID to share filtering information among 
them. This will cause the mapped vlan's to operate in shared vlan 
learning (SVL) mode. Vlan's mapped to a unique FID will operate in 
independent vlan learning mode (IVL). A SET operation on this table is 
allowed only when fsMIDot1qFutureVlanLearningMode is hybrid. By 
default all vlan's will be mapped to the FID equal to their vlan id 
when fsMIDot1qFutureVlanHybridTypeDefault is IVL. If the value of 
fsMIDot1qFutureVlanHybridTypeDefault is SVL all vlan's are mapped to 
filtering database id 1. This table maintains context ID as one more 
index to support Multiple Instances.

fsMIDot1qFutureVlanFidMapEntry row .1.3.6.1.4.1.2076.120.1.5.1

Entry mapping VlanId to Filtering database id.

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanIndex

Column	Syntax	OID
fsMIDot1qFutureVlanIndex VLAN ID for which filtering database information is available.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.2076.120.1.5.1.1
fsMIDot1qFutureVlanFid The Filtering database id (FID) that will be used by the vlan.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2076.120.1.5.1.2

The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.

fsMIDot1qFutureVlanCounterEntry row .1.3.6.1.4.1.2076.120.1.6.1

The entry contains the VLAN statistics

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanIndex

Column	Syntax	OID
fsMIDot1qFutureVlanCounterRxUcast Number of unicast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.1
fsMIDot1qFutureVlanCounterRxMcastBcast Number of multicast/broadcast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.2
fsMIDot1qFutureVlanCounterTxUnknUcast Number of unknown unicast packets flooded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.3
fsMIDot1qFutureVlanCounterTxUcast Number of known unicast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.4
fsMIDot1qFutureVlanCounterTxBcast Number of broadcast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.5
fsMIDot1qFutureVlanCounterRxFrames This object displays the total number of unicast, multicast and broadcast packets received in the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.6
fsMIDot1qFutureVlanCounterRxBytes This object displays the total number of unicast, multicast and broadcast bytes received in the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.7
fsMIDot1qFutureVlanCounterTxFrames This object displays the total number of unicast, multicast and broadcast packets transmitted by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.8
fsMIDot1qFutureVlanCounterTxBytes This object displays the total number of unicast, multicast and broadcast bytes transmitted by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.9
fsMIDot1qFutureVlanCounterDiscardFrames This object displays the number of packets dropped by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.10
fsMIDot1qFutureVlanCounterDiscardBytes This object displays the number of bytes dropped by the VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.120.1.6.1.11
fsMIDot1qFutureVlanCounterStatus A Truth value indicating the statistics collection is enabled/disabled for this vlan. When statistics collection is set to disabled, Vlan stops collecting statistics on this specific vlan. When statistics…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.6.1.12

A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN. The control set for the VLAN 
is applicable only for the virtual context identified by the virtual 
context identifier in this entry.

fsMIDot1qFutureVlanUnicastMacControlEntry row .1.3.6.1.4.1.2076.120.1.7.1

Information controlling the number of distinct unicast MAC addresses
that can be learnt in a VLAN for a virtual context depending on whether
learning is enabled or disabled for the VLAN. The virtual
context is identif…

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanIndex

Column	Syntax	OID
fsMIDot1qFutureVlanUnicastMacLimit The Limiting value on the number of distinct unicast MAC addresses learned in the VLAN in this specified virtual context. The lower limit and upper limit value that can be SET for this object is determin…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2076.120.1.7.1.1
fsMIDot1qFutureVlanAdminMacLearningStatus A Truth value used to configure the unicast MAC learning Admin status for the VLAN in this specified virtual context to either be enabled (1) or disabled (2) or default (3), Configuring this object to default behaviou…	MacLearningStatusr/w Type Values: 1 enabled 2 disabled 3 default	.1.3.6.1.4.1.2076.120.1.7.1.2
fsMIDot1qFutureVlanOperMacLearningStatus A Truth value indicating the unicast MAC learning enabled/disabled Operational status for the VLAN in this specified virtual context. If the VLAN is a Point-point service, then the Mac Learning Status for this VLAN wil…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.7.1.3

A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame. This table maintains context ID
as one more index to support Multiple Instances.

fsMIDot1qFutureVlanTpFdbEntry row .1.3.6.1.4.1.2076.120.1.9.1

Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information.

Indexes

No indexes recorded

Column	Syntax	OID
fsMIDot1qFutureVlanOldTpFdbPort This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of Zero(0), so that ISS walk doesn't break. It indicates the port through which the mac-addr…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.9.1.1
fsMIDot1qFutureConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge brige with customer Mac addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.120.1.9.1.2

Wild card vlan (Id : 0xFFF) static filtering information 
will be used for all Vlans for which there is no specific 
Static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.

fsMIDot1qFutureVlanWildCardEntry row .1.3.6.1.4.1.2076.120.1.10.1

WildCard vlan filtering Information configured into device by
management to which frames received from any port and for any
vlan containing this wild card mac address as destination address
and for which there is no sta…

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanWildCardMacAddress

Column	Syntax	OID
fsMIDot1qFutureVlanWildCardMacAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.120.1.10.1.1
fsMIDot1qFutureVlanWildCardRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.120.1.10.1.2

A Table containing ports to which frames received from a specific
port and destined for fsMIDot1qFutureVlanWildCardMacAddress must be
forwarded, if there is no specific static filtering entry exist
for this MAC.

fsMIDot1qFutureVlanWildCardPortEntry row .1.3.6.1.4.1.2076.120.1.11.1

WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing
fsMIDot1qFutureVlanWildCardMacAddress mac address as de…

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanWildCardMacAddress ARICENTQ-BRIDGE-MIBfsDot1qTpPort

Column	Syntax	OID
fsMIDot1qFutureVlanIsWildCardEgressPort Indicates whether the port is an egress port of wildcard entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.11.1.1

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances.

fsMIDot1qFutureStaticUnicastExtnEntry row .1.3.6.1.4.1.2076.120.1.12.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

No indexes recorded

Column	Syntax	OID
fsMIDot1qFutureStaticConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge bridge with customer Mac addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.120.1.12.1.1

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
This table maintains context ID as one more index to support 
Multiple Instances. In case of BCM, the dot1qFutureVlanPort index 
should always be 0 since BCM supports Subnet based VLAN 
globally (not on per port)

fsMIDot1qFutureVlanPortSubnetMapEntry row .1.3.6.1.4.1.2076.120.1.13.1

Entry that contains Vlan-Subnet address mapping.

Indexes

fsMIDot1qFutureVlanPort fsMIDot1qFutureVlanPortSubnetMapAddr

Column	Syntax	OID
fsMIDot1qFutureVlanPortSubnetMapAddr The Source IP-Subnet address for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.120.1.13.1.1
fsMIDot1qFutureVlanPortSubnetMapVid The Vlan to which the source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.120.1.13.1.2
fsMIDot1qFutureVlanPortSubnetMapARPOption Configurable option for discarding/allowing ARP Untagged frames on the vlan. The value allow (1) indicates that ARP frames with source IP-subnet address matching the dot1qFutureVlanPortSubnetMapEntry will be classifie…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2076.120.1.13.1.3
fsMIDot1qFutureVlanPortSubnetMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.120.1.13.1.4

An extension to fsDot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.

fsMIDot1qFutureStVlanExtEntry row .1.3.6.1.4.1.2076.120.1.15.1

Each entry specifies the Private Vlan configuration done for
a given Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
fsMIDot1qFutureStVlanPVlanType This object identifies the Private vlan type for this vlan. normal - Vlan does not belong to any Private VLAN domain. primary - Primary vlan in a Private VLAN domain. isolated - Isolated vlan in a Private VLAN dom…	Enumerationr/w Enumerated Values: 1 normal 2 primary 3 isolated 4 community	.1.3.6.1.4.1.2076.120.1.15.1.1
fsMIDot1qFutureStVlanPrimaryVid This object identifies the primary vlan assoicated with this vlan. For primary and normal vlans, this object will have the value zero and configuring this object to non-zero value will not be allowed for them. For se…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2076.120.1.15.1.2
fsMIDot1qFutureStVlanFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses in this Vlan are removed.After flush this object is set to 'false'	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.15.1.3
fsMIDot1qFutureStVlanEgressEthertype This object sets the value for the Egress Ether type of a packet. The value set for this object is applicable for a port present in this vlan only when the value of fsMIDot1qFutureVlanPortEgressTPIDType is set to vlanb…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2076.120.1.15.1.4

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.

fsMIDot1qFutureVlanPortSubnetMapExtEntry row .1.3.6.1.4.1.2076.120.1.16.1

Entry that contains Vlan-Subnet address mapping.

Indexes

fsMIDot1qFutureVlanPort fsMIDot1qFutureVlanPortSubnetMapExtAddr fsMIDot1qFutureVlanPortSubnetMapExtMask

Column	Syntax	OID
fsMIDot1qFutureVlanPortSubnetMapExtAddr The Source IP address for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.120.1.16.1.1
fsMIDot1qFutureVlanPortSubnetMapExtMask The Subnet Mask for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2076.120.1.16.1.2
fsMIDot1qFutureVlanPortSubnetMapExtVid The Vlan to which the Source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2076.120.1.16.1.3
fsMIDot1qFutureVlanPortSubnetMapExtARPOption Configurable option for discarding/allowing ARP Untagged frames on the vlan. The value allow (1) indicates that ARP frames with source IP-subnet address matching the fsMIDot1qFutureVlanPortSubnetMapExtEntry wil…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2076.120.1.16.1.4
fsMIDot1qFutureVlanPortSubnetMapExtRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.120.1.16.1.5

An extension to fsDot1qVlanStaticPortConfigEntry VLAN table.
This table contains the FDB Flush related
configurations.

fsMIDot1qFuturePortVlanExtEntry row .1.3.6.1.4.1.2076.120.1.17.1

Each entry specifies the Vlan configuration done for
a given Vlan and Port.

Indexes

No indexes recorded

Column	Syntax	OID
fsMIDot1qFuturePortVlanFdbFlush If this object is set to 'true', then all the dynamically learnt MAC addresses on the specified interface and vlan are removed.After flush this object is set to 'false'	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2076.120.1.17.1.1

This table contains the Loopback Status for all VLANs.

fsMIDot1qFutureVlanLoopbackEntry row .1.3.6.1.4.1.2076.120.1.18.1

This entry contains the VLAN loopback Status.

Indexes

fsMIDot1qFutureVlanContextId fsMIDot1qFutureVlanIndex

Column	Syntax	OID
fsMIDot1qFutureVlanLoopbackStatus This object specifies the loopback status for the vlan. When Loopback is enabled, all data packets received in the vlan will be sent back in the same port from which the packets are received.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.120.1.18.1.1