ASANTE-SWITCH-MIB Table View

Table listing the Network Management Stations
that are to receive traps generated by this
agent.

ipagentTrapRcvrEntry row .1.3.6.1.4.1.298.1.1.5.2.1

Destination IP address and community string for a
particular trap receiver. Entries can be added or
deleted. To add an entry, all objects which have
read-write access defined in the same table should
be set in one set …

Indexes

ipagentTrapRcvrIpAddr

Column	Syntax	OID
ipagentTrapRcvrIpAddrmandatory IP address of the management station to receive traps.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.298.1.1.5.2.1.1
ipagentTrapRcvrStatusmandatory Validation status of this entry. If the value of this object is set to invalid(3), then that particular entry is deemed invalid, meaning that the address for that entry is no longer valid because the entry has been rem…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 invalid	.1.3.6.1.4.1.298.1.1.5.2.1.2
ipagentTrapRcvrCommmandatory Community string for traps sent to this trap receiver.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.298.1.1.5.2.1.3

A table of information about the switch's
image banks.

eSWBankImageInfoEntry row .1.3.6.1.4.1.298.1.5.1.1.1.14.1

A row in the image bank table containing
information about a specific bank.

Indexes

eSWBankIndex

Column	Syntax	OID
eSWBankIndexmandatory The index of bank image information table. It is the number of the image bank. Currently the IntraSwitch 62xx family supports 2 image banks.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.298.1.5.1.1.1.14.1.1
eSWMajorVermandatory The major version of the image file loaded in the bank. If this object and eSWMinorVer both have zero values, the bank has no image code loaded.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.1.1.14.1.2
eSWMinorVermandatory The minor version number of the bank image software. If this object and eSWMajorVer both have zero values, the bank has no image code loaded.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.1.1.14.1.3
eSWDateTimemandatory The date and time of the image software loaded in this bank.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.298.1.5.1.1.1.14.1.4

This is the table to describe basic information
for each group of ports in the switch.

eSWGroupInfoEntry row .1.3.6.1.4.1.298.1.5.1.2.5.1

This is the entry to describe basic information
for a particular group of ports.

Indexes

eSWGrpIndex

Column	Syntax	OID
eSWGrpIndexmandatory The group number, which is the index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.5.1.1
eSWGrpIDmandatory The ID of this group module. This is the MAC address of the first port in the group.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.5.1.2
eSWGrpStatemandatory A command to disable or enable a physical module in the switch device stack.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.2.5.1.3
eSWGrpNumofPortsmandatory The number of ports including expansion ports in the group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.5.1.4
eSWGrpTypemandatory The type of group module described by this entry.	Enumeration Enumerated Values: 1 other 2 empty 3 intraSwitch 4 intraStack-Base 5 intraStack-FX8 6 intraStack-TX16 7 enterprise6216M-TX16 8 enterprise6224M-TX24 9 intraCore8000 10 intraCore-RJ45 11 intraCore-RJ21 12 intraCore-GIGA	.1.3.6.1.4.1.298.1.5.1.2.5.1.5
eSWGrpDescrptionmandatory A description of the group module described by this entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.298.1.5.1.2.5.1.6
eSWGrpLEDmandatory This octet string represents the current LED setting for this slot/group. Each octet in the string represents one led. LEDs on the front panel of the slot module are ordered from the top to the bottom and order in lef…	OctetString Constraints: range: 128-128	.1.3.6.1.4.1.298.1.5.1.2.5.1.7
eSWGrpFanStatusmandatory The value of this object describes the fan status. If there is more than one fan within the device, the indication shows any failure among the fans.	Enumeration Enumerated Values: 1 other 2 no-fan 3 normal 4 fail 5 fan-1-bad 6 fan-2-bad 7 fan-1-2-bad	.1.3.6.1.4.1.298.1.5.1.2.5.1.8
eSWGrpNumofExpPortsmandatory The number of expansion ports in this group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.5.1.9
eSWGrpLastChangemandatory The value of sysUpTime at the last change in status of the group since it has been in operation. If no change has occurred since this group became operational, its value is zero. In IntraStack, this object is useful on…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.298.1.5.1.2.5.1.10
eSWGrpResetmandatory This object represents the current group reset state.	Enumeration Enumerated Values: 1 other 2 noReset 3 reset	.1.3.6.1.4.1.298.1.5.1.2.5.1.11

A table containing basic information for each
port in this switch.

eSWPortInfoEntry row .1.3.6.1.4.1.298.1.5.1.2.6.1

A table entry containing information about a
specific port.

Indexes

eSWPortGrpIndex eSWPortIndex

Column	Syntax	OID
eSWPortGrpIndexmandatory The number of the group containing the port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.6.1.1
eSWPortIndexmandatory The number of the port which this entry describes.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.6.1.2
eSWPortTypemandatory The type port in this switch. MII-Empty(1) means there is no expansion module plugged in.	Enumeration Enumerated Values: 1 other 2 mii-Empty 3 mii-FL 4 mii-RJ45 5 mii-FX 6 rj45 7 foil	.1.3.6.1.4.1.298.1.5.1.2.6.1.3
eSWPortAutoNegAbilitymandatory Indicates whether the port has Auto Negotiation signaling ability.	Enumeration Enumerated Values: 1 other 2 with 3 without	.1.3.6.1.4.1.298.1.5.1.2.6.1.4
eSWPortLinkmandatory The link status of this port.	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.298.1.5.1.2.6.1.5
eSWPortSpeedmandatory The working speed of this port. If the port's link is not up, this object should show the configured speed.	Enumeration Enumerated Values: 1 other 2 m10-Mbps 3 m100-Mbps 4 g1-Gbps	.1.3.6.1.4.1.298.1.5.1.2.6.1.6
eSWPortDuplexmandatory The duplex state of this port. When the port link is not up, this object should show the configured duplex information.	Enumeration Enumerated Values: 1 other 2 half-Duplex 3 full-Duplex	.1.3.6.1.4.1.298.1.5.1.2.6.1.7

A table describing the port information for each
group in BYTE mapping method. The main purpose
of creating this table is to reduce the SNMP
parsing time and the load of network traffic.

eSWGpPtInfoEntry row .1.3.6.1.4.1.298.1.5.1.2.7.1

This is an entry of eSWGroupPortInfoTable.

Indexes

eSWGpPtInfoIndex

Column	Syntax	OID
eSWGpPtInfoIndexmandatory The group number .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.7.1.1
eSWGpPtInfoTypemandatory This octet string is for the type of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortType.	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.2.7.1.2
eSWGpPtInfoAutoNegAbilitymandatory This octet string is for the auto negotiation ability of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortAutoNegAbilit…	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.2.7.1.3
eSWGpPtInfoLinkmandatory This octet string is for the link status of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortLink.	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.2.7.1.4
eSWGpPtInfoSpeedmandatory This octet string is for the operating speed of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortSpeed.	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.2.7.1.5
eSWGpPtInfoDuplexmandatory This octet string is for the Duplex state of each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortDuplex.	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.2.7.1.6

A table describing the MAC addresses learned
on each port.

eSWPtMacInfoEntry row .1.3.6.1.4.1.298.1.5.1.2.8.1

Entry of eSWPtMacInfoTable.

Indexes

eSWPtMacPort eSWPtMacMACADDR

Column	Syntax	OID
eSWPtMacPortmandatory The port number in the switch.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.8.1.1
eSWPtMacMACADDRmandatory MAC address.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.8.1.2

A table describing the information about every
VLAN associated with the switch.

eSWVlanEntry row .1.3.6.1.4.1.298.1.5.1.2.9.4.1

A list of information for each VLAN within the
switch.

Indexes

eSWVLANIndex

Column	Syntax	OID
eSWVLANIndexmandatory Index in VLAN Configuration Table within the switch.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.9.4.1.1
eSWVlanNamemandatory This octet string is the name of the VLAN. The length of the name can be up to 32 printable characters.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.298.1.5.1.2.9.4.1.2
eSWVlanIDmandatory A 12 bit indentifier for this VLAN. 0 - The NULL VLAN ID. It is used when the tagging header contains only user priority information; no VLAN identifier is present in the frame. Th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.9.4.1.3
eSWVlanMemberSetmandatory The set of ports to which traffic destined for this VLAN may be transmitted. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second speci…	OctetString	.1.3.6.1.4.1.298.1.5.1.2.9.4.1.4
eSWVlanMgmAccessmandatory This object provides enabling and disabling of switch management access. When this object for a VLAN entry is set to Enable(1), the switch management (Telnet, SNMP Agent, HTTP Server and ICMP serverices can be accessed …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.298.1.5.1.2.9.4.1.5

A table describing the Trunk Bundles information
of the switch.

eSWTrunkBundleEntry row .1.3.6.1.4.1.298.1.5.1.2.11.1

This is an entry of eSWTrunkBundleTable.

Indexes

eSWTrunkBundleIndex

Column	Syntax	OID
eSWTrunkBundleIndexmandatory The index of eSWTrunkBundleTable table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.11.1.1
eSWTrunkBundlePortAmandatory The ID of the first port of the Trunk Bundles.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.11.1.2
eSWTrunkBundlePortBmandatory The ID of the second port of the Trunk Bundles.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.11.1.3
eSWTrunkBundleStatemandatory When this function is enabled, ports specified by port A and port B will form a Trunk Bundle to provide a fat communications channel.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.2.11.1.4

A table that contains information about the
Security Configuration that is associated with
each port of the switch.

eSWSecConfigEntry row .1.3.6.1.4.1.298.1.5.1.2.13.4.1

A list of information for each port within
the switch.

Indexes

eSWSecPortIndex

Column	Syntax	OID
eSWSecPortIndexmandatory The number of the port which this entry describes.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.13.4.1.1
eSWSecurityLevelmandatory Security Level Configured for the port.	Enumerationr/w Enumerated Values: 1 newNodeDetection 2 knownMACAddressForwarding 3 restrictedKnownMACAddressForwarding 4 knownMACAddressForwardingWithIntruderLock 5 normalPort 6 other	.1.3.6.1.4.1.298.1.5.1.2.13.4.1.2

A table describing the MAC addresses configured
by the management for a port.  This entries of
the MAC Address are static entries
(No aging will be performed on these MAC
Addresses).

eSWSecIncSetConfigEntry row .1.3.6.1.4.1.298.1.5.1.2.13.7.1

Entry of eSWSecIncSetConfigTable.

Indexes

eSWIncSetPort eSWIncSetMACAddr

Column	Syntax	OID
eSWIncSetPortmandatory The port number in the switch associated with the Inclusive Set MAC Address.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.13.7.1.1
eSWIncSetMACAddrmandatory MAC address which is part of the Inclusive Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be forwarded by the Associated Port if the Port is set for Security Level 2 , Leve…	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.13.7.1.2
eSWIncSetMACStatusmandatory MAC address which is part of the Inclusive Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be forwarded by the Associated Port if the Port is set for Security Level 2 , Leve…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.298.1.5.1.2.13.7.1.3

A table containing Intruder MAC Addresses when
any port is set to Security Level 2 or Security
Level 4.  In case of  a Port set to Security Level
4 this table indicating the Intruder MAC Addresses
are locked ( that is any station with its MAC
Address in the table will not able to forward \
transmits using any of the switch Ports.

eSWSecIntMACAddrEntry row .1.3.6.1.4.1.298.1.5.1.2.13.8.1

Entry of eSWSecIntMACAddrTable.

Indexes

eSWIntMACAddrPort eSWIntMACAddr

Column	Syntax	OID
eSWIntMACAddrPortmandatory The port number in the switch associated with the Inturder MAC Address.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.13.8.1.1
eSWIntMACAddrmandatory Intruder MAC Address.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.13.8.1.2

A table describing the filtering MAC addresses
configured by the management for a VLAN. This
entries of the MAC Address are static entries.
No aging will be performed on these MAC
Addresses.

eSWFiltMACVLANBasedConfigEntry row .1.3.6.1.4.1.298.1.5.1.2.14.2.1

Entryof eSWFiltMACVLANBasedConfigTable.

Indexes

eSWVLANIndex eSWFiltMACAddr

Column	Syntax	OID
eSWVIDIndexmandatory Index in VLAN Configuration Table within the switch for which the Filtering MAC Address is associated.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.14.2.1.1
eSWFiltMACAddrmandatory MAC Address which will be filtered in the indexed VID, when appear in source MAC Address field of the frame.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.14.2.1.2
eSWFiltMACStsmandatory MAC address which is part of the VLAN Based Filtering MAC Address Set. This MAC Address when appears in the source MAC Address field in the ethernet frame will be filtered in the indexed VID.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.298.1.5.1.2.14.2.1.3

A table describing the filtering MAC addresses
configured by the management for a port.  This
entries of the MAC Address are static entries
No aging will be performed on this MAC Addresses.

eSWFiltMACPortBasedConfigEntry row .1.3.6.1.4.1.298.1.5.1.2.14.3.1

Entry of eSWFiltMACPortBasedConfigTable.

Indexes

eSWFiltPortIndex eSWFiltPMACAddr

Column	Syntax	OID
eSWFiltPortIndexmandatory The Port number in the switch.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.14.3.1.1
eSWFiltPMACAddrmandatory MAC Address which will be filtered in the indexed Port, when appear in destination MAC Address field of the frame.	MacAddressr/w Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.2.14.3.1.2
eSWFiltPMACStatusmandatory This field indicates status associated with the MAC Address.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.298.1.5.1.2.14.3.1.3

A table describing the filtering Protocol Type
configured by the management for a port.

eSWFiltProtVLANBasedCFGEntry row .1.3.6.1.4.1.298.1.5.1.2.14.4.1

Entry of eSWFiltProtVLANBasedCFGTable.

Indexes

eSWVLANIndex

Column	Syntax	OID
eSWFiltProtocolVIDmandatory Index in VLAN Configuration Table within the switch for which the Filtering Protocol Type is associated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.14.4.1.1
eSWFiltVLANProtocolTypemandatory This object represents the Protocol Type Filter as applied to the Indexed VID. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit …	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.298.1.5.1.2.14.4.1.2

A table describing the filtering Protocol Type
configured by the management for a port.

eSWFiltProtPortBasedCFGEntry row .1.3.6.1.4.1.298.1.5.1.2.14.5.1

Entry of eSWFiltProtPortBasedCFGTable.

Indexes

eSWPortIndex

Column	Syntax	OID
eSWFiltProtPortmandatory The Port number in the switch.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.2.14.5.1.1
eSWFiltProtcolTypemandatory This object represents the Protocol Type Filter as applied to the Indexed Port. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.298.1.5.1.2.14.5.1.2

A table describing the port control information
for each port in this group.

eSWPortCtrlEntry row .1.3.6.1.4.1.298.1.5.1.3.1.1

An entry describing control information for a
specific port.

Indexes

eSWGrpPtCtrlIndex eSWPortCtrlIndex

Column	Syntax	OID
eSWGrpPtCtrlIndexmandatory The group containing the port for which this entry has information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.1.1.1
eSWPortCtrlIndexmandatory The port number for this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.1.1.2
eSWPortCtrlStatemandatory Identifies whether the port is administratively enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.3
eSWPortCtrlBcastFiltermandatory Broadcast packet filtering control. If this is enabled, broadcast packets received on this port will be filtered out. The default is Disable(3).	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.4
eSWPortCtrlStNFwmandatory Enables or disables store-and-forward switching for this port When set to Enable(2) the frame will be forwarded after it has been completely received and checksummed. When set to Disable(3), the port will use fragment-f…	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.5
eSWPortCtrlSTPmandatory If this function is enable(1) and eSWPortCtrlState is also enable(1), that means this port will join the Spanning Tree Algorithm (STP) caculation. Asante 6016/6024 switches do not support individual port STP participat…	Enumeration Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.6
eSWPortCtrlVlanIDmandatory The 12 bit port VLAN indentifier for this port within the switch. 0 - The NULL VLAN ID. It is used when the tagging header contains only user priority information; no VLAN identifier is present in the …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.1.1.7
eSWPortCtrlVlanTaggingmandatory Whether a frame should be tagged with VLAN Tagging Header when transmitted through this port within the switch. Enable - Use Asante proprietary tagging mechanism on this port wihtin the switch. Enable8021Q - Use 802.1Q …	Enumerationr/w Enumerated Values: 1 enable 2 enable8021Q 3 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.8
eSWPortCtrlVlanGroupsmandatory This object represents the port vlan map in 2 octets. The octets meaning is as follow: If 2 octets are considered together as 16 bit field, then the least significant bit (bit0) represents VLAN Group1, bit1 represents …	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.298.1.5.1.3.1.1.9
eSWPortCtrlTrunkBundleIndexmandatory A value of 0 means that the port does not belong to any trunk Bundle. A non-zero value is the index of the Trunk Bundle to which this port belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.1.1.10
eSWPortCtrlGVRPEnablemandatory This entry when set to enable, means GVRP frames can be transmitted and received on this port. If disabled, it means GVRP frames cannot be transmitted on this port and the received GVRP frames should be discarded. Defa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.298.1.5.1.3.1.1.11
eSWPortCtrlSecurityLevelmandatory Security Level associated with the port. When set to Normal Port (5) , the Security Level (if present) will be cleared.	Enumerationr/w Enumerated Values: 1 newNodeDetection 2 knownMACAddressForwarding 3 restrictedKnownMACAddressForwarding 4 knownMACAddressForwardingWithIntruderLock 5 normalPort 6 other	.1.3.6.1.4.1.298.1.5.1.3.1.1.12
eSWPortProtocolFiltermandatory This object represents the Protocol Level Security Filter as applied to the Port. The Filtering capabilities is indicated by each bit in this 2 bytes octet string. 1 - Filter OUT 0 - Do not Filter Bit 0 : Filter OU…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.298.1.5.1.3.1.1.13

A table containing control information for
each port in a group. This table is indexed
by the group number.  It uses a BYTE mapping
method. Each byte represents control information
for a port in this group.  The main purpose of
creating this table is to reduce the SNMP engine
parsing time and the load of network traffic.

eSWGpPtCtrlEntry row .1.3.6.1.4.1.298.1.5.1.3.2.1

An entry of table eSWGpPtCtrlTable.

Indexes

eSWGpPtCtrlIndex

Column	Syntax	OID
eSWGpPtCtrlIndexmandatory The index of this table. It is the group number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.2.1.1
eSWGpPtCtrlStatemandatory This octet string displays the administrative enable/disable state of each port in the group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortC…	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.2
eSWGpPtCtrlBcastFiltermandatory This octet string displays the broadcast filter state for each port in this group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each octet stores the data from eSWPortCtrlBcastFil…	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.3
eSWGpPtCtrlStNFwmandatory This octet string displays the switching technique (store-and-forward or fragment-free) being used by each port in the group. Each octet represents one port; therefore, octet 0 is port 1 and octet 9 is port 10. Each oc…	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.4
eSWGpPtCtrlSTPmandatory This octet string displays the individual port's participation in the Spanning Tree Algorithm. Asante 62xx switches do not support individual port STP participation, so all ports should show the same value. Each octet …	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.5
eSWGpPtCtrlSecurityLevelmandatory This octet string is for the Security Level information of each port in the group. Each octet represents one port; therefore , the octet 0 is port 1 and the octet 9 is port 10. Each octet stores the data from eSWPortCt…	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.6
eSWGpPtProtocolFiltermandatory This octet string represents the Protocol Level Security Filter as applied to each Port. Each octet represents one port; therefore , the octet 0 is port 1 and the octet 9 is port 10. Each octet stores the data from eS…	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.298.1.5.1.3.2.1.7

A table containing information about each port's
auto- negotiation information.

eSWAutoPortCtrlEntry row .1.3.6.1.4.1.298.1.5.1.3.3.1

A entry of eSWAutoPortControlTable. It uses
eSWAutoNegGrpIndex and eSWAutoNegPortIndex to
find the table entry.

Indexes

eSWAutoNegGrpIndex eSWAutoNegPortIndex

Column	Syntax	OID
eSWAutoNegGrpIndexmandatory The value of this object identifies the group for which this entry contains port auto-negotiation information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.3.1.1
eSWAutoNegPortIndexmandatory The value of this object identifies the port for which this entry contains auto-negotiation information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.3.3.1.2
eSWAutoNegAdminStatemandatory A port which has auto-negotiation signaling ability will be enabled to do so when this object is set to enabled(2). If the object is set to disable(3) the port will operate as if it had no auto-negotiation ability.	Enumerationr/w Enumerated Values: 1 other 2 enabled 3 disable	.1.3.6.1.4.1.298.1.5.1.3.3.1.3
eSWAutoNegRemoteAblemandatory This object will be set to able(2) if the port has detected that the link partner has auto-negotiation ability.	Enumeration Enumerated Values: 1 other 2 able 3 not-able	.1.3.6.1.4.1.298.1.5.1.3.3.1.4
eSWAutoNegAutoConfigmandatory Indicates whether Auto Negotiation signaling is in progress or has completed.	Enumeration Enumerated Values: 1 other 2 configuring 3 complete 4 disable 5 parallel-detect-fail 6 remote-fault	.1.3.6.1.4.1.298.1.5.1.3.3.1.5
eSWAutoNegLocalAbilitymandatory The connecting ability of local port. The capability of the local port will be represented by each bit in this 2 byte octet string. The meaning of each bit is as follows: 0: is not capable 1: is capable…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.298.1.5.1.3.3.1.6
eSWAutoNegAdvertisedAbilitymandatory This object represents the capabilities which will be advertised in the Auto-Negotiation sequence. The capability is indicated by each bit in this 2 byte octet string. 0: is not capable 1: is capable Bit 0 : default ca…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.298.1.5.1.3.3.1.7
eSWAutoNegReceivedAbilitymandatory Indicates the advertised capabilities of link partner. The capability will be represented by each bit in this 2 byte octet string. The meaning of each bit is as follows: 0: is not capable 1: is capable …	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.298.1.5.1.3.3.1.8
eSWAutoNegRestartAutoConfigmandatory Forces auto-negotiation to begin link negotiation. Has no effect if auto-negotiation signaling is diabled. Always returns noRestart(3).	Enumerationr/w Enumerated Values: 1 other 2 reStart 3 noRestart	.1.3.6.1.4.1.298.1.5.1.3.3.1.9

This table describes the source IP address and
source MAC address mapping pair. It also provides
a function to detect IP address duplication. This
table can show that 2 MAC addresses map to the
same IP address. It is an important function
to help the system administrator to do network
administration.

eSWMonIPEntry row .1.3.6.1.4.1.298.1.5.1.4.1.1

The entry of this table. The table is
indexed by the MAC address.

Indexes

eSWMonIP

Column	Syntax	OID
eSWMonIPmandatory The IP address corresponding to the MAC address in eSWMonMAC.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.298.1.5.1.4.1.1.1
eSWMonMACmandatory The source MAC address of the monitor entry.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.298.1.5.1.4.1.1.2
eSWMonVLANIDmandatory The VLAN number of this monitor address entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.4.1.1.3
eSWMonGrpmandatory The IP address is learned from which group number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.4.1.1.4
eSWMonPortmandatory The port on which the IP address was learned The agent should display value = (maximum number of ports in the system + 1) when reflecting the System's Management IP address.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.298.1.5.1.4.1.1.5