ARUBAWIRED-LOOPPROTECT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
8
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1
·
1 row entry
·
8 columns
Uses the aruba variant from
Command help
/opt/observium/mibs/aruba.
Walk arubaWiredLoopProtectPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARUBAWIRED-LOOPPROTECT-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectPortTable'
Per-interface configuration for Loop Protection.
Loop Protection configuration information for
a single port.
a single port.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB… |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.1 |
||||||
|
This object indicates whether the Loop Protection is enabled
on a port. The default value is FALSE |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.2 |
||||||
|
This object will be set to TRUE when a loop is detected on
the port. The value of this object will be reset to FALSE when the port's arubaWiredLoopProtectPortEnable is set to FALSE. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.3 |
||||||
|
The value of sysUpTime when a loop was last detected
on this port. A value of 0 means that the timestamp has not been set. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.4 |
||||||
|
This object provides the number of loops detected on a Loop Protection enabled
port. The value of this object is set to zero when Loop Protection is disabled on a port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.5 |
||||||
|
Controls the action taken when a Loop Protection packet is
received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. When set to 'noDisable' the transmitting port is… |
LoopProtectReceiverActionr/w Type Values:
|
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6 |
||||||
|
The loop-detected VLAN ID. A value of 0 indicates no loop.
|
Integer32 Constraints: range: 0-4096 |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.7 |
||||||
|
A list of VLANs for this interface in which Loop Protection is enabled.
|
VidListr/w Type Constraints: range: 0..512 |
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.8 |
