ARUBAWIRED-LOOPPROTECT-MIB

        This MIB module contains HP proprietary
extensions to the standard Loop Protect MIBs.
    
Source file
ARUBAWIRED-LOOPPROTECT-MIB
Last revised
Identity
arubaWiredLoopProtectMIB
Base OID
1.3.6.1.4.1.47196.4.1.1.3.1
Imported Objects
ARUBAWIRED-NETWORKING-OID wndFeatures
IF-MIB ifIndex InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the aruba MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ARUBAWIRED-LOOPPROTECT-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARUBAWIRED-LOOPPROTECT-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
.1.3.6.1.4.1.47196.4.1.1.3.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.2
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3
Enumeration
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.4
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.5
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.2
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.3
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.4
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.5
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6
Integer32
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.7
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.8
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (3)
Enumeration
active(1)
notInService(2)
notReady(3)
Enumeration
disableTx(1)
noDisable(2)
disableTxRx(3)
OctetString range: 0..512
Compliance Statements (1)

OID .1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2.5
The compliance statement for HP Switches with
support for arubaWired loop protection objects.
Required groups
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.1
A arubaWiredLoopProtectLoopDetectedNotification signifies
that a loop is detected by the Loop Protection Protocol.
Generation of this notification is controlled by
arubaWiredLoopProtectTrapLoopDetectEnable.

To prevent excessive notifications, this trap allows only
one notifications every 30 seconds.
Notifications that are missed due to this limitation are
dropped and are not sent later.
.1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.2
A arubaWiredLoopProtectVlanLoopDetectedNotification signifies
that a loop is detected by the Loop Protection feature while
operating in VLAN mode. Generation of this notification is
controlled by arubaWiredLoopProtectTrapLoopDetectEnable.

To prevent excessive notifications, this trap allows only
one notifications every 30 seconds.
Notifications that are missed due to this limitation are
dropped and are not sent later.