ARICENT-VPLS-BGP-MIB
Copyright (C) The IETF Trust (2013). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
-- this note.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains managed object definitions for
BGP signaled Virtual Private LAN Services as in
[RFC4761]
This MIB module enables the use of any underlying pseudowire
network.
- Source file
ARICENT-VPLS-BGP-MIB- Last revised
- Identity
fsVplsBgpMIB- Base OID
1.3.6.1.4.1.29601.2.86
Imported Objects
| PW-STD-MIB | pwIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | enterprises MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| VPLS-GENERIC-MIB | vplsConfigIndex |
Net-SNMP examples using the aricent MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ARICENT-VPLS-BGP-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ARICENT-VPLS-BGP-MIB::fsVplsBgpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-VPLS-BGP-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-VPLS-BGP-MIB::fsVplsBgpMIB'
Objects (19)
Showing 19 of 19 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.29601.2.86 |
||
.1.3.6.1.4.1.29601.2.86.1 |
||
.1.3.6.1.4.1.29601.2.86.1.1 |
||
.1.3.6.1.4.1.29601.2.86.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.29601.2.86.1.1.1.1 |
|
.1.3.6.1.4.1.29601.2.86.1.2 |
||
.1.3.6.1.4.1.29601.2.86.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.29601.2.86.1.2.1.1 |
|
|
|
.1.3.6.1.4.1.29601.2.86.1.2.1.2 |
|
|
Unsigned32
|
.1.3.6.1.4.1.29601.2.86.1.2.1.3 |
|
.1.3.6.1.4.1.29601.2.86.1.2.1.5 |
||
.1.3.6.1.4.1.29601.2.86.1.2.1.6 |
||
.1.3.6.1.4.1.29601.2.86.1.3 |
||
.1.3.6.1.4.1.29601.2.86.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.29601.2.86.1.3.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.29601.2.86.1.3.1.2 |
|
.1.3.6.1.4.1.29601.2.86.2 |
||
.1.3.6.1.4.1.29601.2.86.2.1 |
||
.1.3.6.1.4.1.29601.2.86.2.2 |
Dependencies (15) 6 direct · 9 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- HC-PerfHist-TC-MIBrfc
- IANA-PWE3-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- PerfHist-TC-MIBrfc
- PW-TC-STD-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- PW-STD-MIBrfc
- VPN-TC-STD-MIBrfc
- VPLS-GENERIC-MIBrfc
- ARICENT-VPLS-BGP-MIBaricentselected
Conformance Groups (3)
|
The group of objects supporting configuration
of L2VPN VPLS services using BGP |
.1.3.6.1.4.1.29601.2.86.2.2.1
|
|
|
The group of objects supporting management of VPLS
Edge devices for L2VPN VPLS services using BGP |
.1.3.6.1.4.1.29601.2.86.2.2.2
|
|
|
The group of objects supporting management of
Pseudo Wires for L2VPN VPLS services using BGP |
.1.3.6.1.4.1.29601.2.86.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.29601.2.86.2.1.1Compliance requirement for implementations that
provide full support for VPLS-BGP-MIB.
Such devices can then be monitored and configured using
this MIB module.
provide full support for VPLS-BGP-MIB.
Such devices can then be monitored and configured using
this MIB module.
Required groups
| mandatory | vplsBgpConfigGroup | |
| mandatory | vplsBgpVEGroup | |
| mandatory | vplsBgpPwBindGroup |
OID
.1.3.6.1.4.1.29601.2.86.2.1.2Compliance requirement for implementations that only
provide read-only support for VPLS-BGP-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
provide read-only support for VPLS-BGP-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
| mandatory | vplsBgpConfigGroup | |
| mandatory | vplsBgpVEGroup | |
| mandatory | vplsBgpPwBindGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| vplsBgpConfigVERangeSize | readonly | Write access is not required. | |
| vplsBgpVEName | readonly | Write access is not required. | |
| vplsBgpVEPreference | readonly | Write access is not required. | |
| vplsBgpVERowStatus | readonly | Write access is not required. |