ARICENT-MIPROVIDERBRIDGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
86

fsMIPbContextInfoTable

table
.1.3.6.1.4.1.2076.127.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbContextInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbContextInfoTable' 
This object specifies the List of Provider Bridge related objects that
can be configured per Virtual Context in the system.
fsMIPbContextInfoEntry row .1.3.6.1.4.1.2076.127.1.1.1
This object specifies the Virtual Context based Provider Bridge objects.
Indexes
Column Syntax OID
fsMIPbContextId
This object specifies a Virtual Context.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.127.1.1.1.1
fsMIPbMulticastMacLimit
This object specifies MAC table size of the device. The
size SET for this object is applicable only for the Virtual Context
identified by the Virtual Context Id in this entry.The upper limit value
that can be SET for t…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2076.127.1.1.1.2
fsMIPbTunnelStpAddressdeprecated
This object specifies the MAC address SET for this object is applicable
only for the Virtual Context identified by the Virtual Context Id in
this entry. The MAC address to be used for Customer STP BPDUs tunneling
inside…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.1.1.1.3
fsMIPbTunnelLacpAddressdeprecated
This object specifies the MAC address SET for this object is applicable
only for the Virtual Context identified by the Virtual Context Id in
this entry. The MAC address to be used for LACP packets tunneling inside
Provi…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.1.1.1.4
fsMIPbTunnelDot1xAddressdeprecated
This object specifies the MAC address SET for this object is applicable
only for the Virtual Context identified by the Virtual Context Id in
this entry. The MAC address to be used for Dot1x packets tunneling
inside Prov…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.1.1.1.5
fsMIPbTunnelGvrpAddressdeprecated
This object specifies the MAC address SET for this object is
applicable only for the Virtual Context identified by the Virtual
Context Id in this entry.
The MAC address to be used for GVRP PDUs tunneling inside Provider…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.1.1.1.6
fsMIPbTunnelGmrpAddressdeprecated
This object specifies the MAC address SET for this object is applicable
only for the Virtual Context identified by the Virtual Context Id in
this entry. The MAC address to be used for GMRP PDUs tunneling inside
Provider…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.1.1.1.7

fsMIPbPortInfoTable

table
.1.3.6.1.4.1.2076.127.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbPortInfoTable' 
This object specifies a table containing provider bridge related 
configurations for the externally accessible ports.
All the objects in this table are applicable 
only when the Bridge Mode is set as ProviderBridge or 
ProviderCoreBridge or ProviderEdgeBridge.
fsMIPbPortInfoEntry row .1.3.6.1.4.1.2076.127.2.1.1
This object specifies each entry in this table representing the
Provider Bridge related port configurations. This table is indexed by
ifIndex.
Indexes
Column Syntax OID
fsMIPbPort
This object specifies the Index value of the port in the system for
which this entry applies. The maximum index value of the port is defined
by the system.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.1.1.1
fsMIPbPortSVlanClassificationMethod
This object specifies the type of SVLAN classification that has to be used
for a given type of port. providerNetworkPort / customerNetworkPort -
Port's 'pvid' will be the SVLAN classification for the untagged packets
…
Enumerationr/w
Enumerated Values:
1sourceMac
2destinationMac
3cvlanSrcMac
4cvlanDstMac
5dscp
6cvlanDscp
7sourceIp
8destinationIp
9srcIpDstIp
10cvlanDstIp
11cvlan
12pvid
 .1.3.6.1.4.1.2076.127.2.1.1.2
fsMIPbPortSVlanIngressEtherTypedeprecated
This object specifies the S-VLAN tag ether type used for the packets
received on this port.Packets received on a port are considered tagged,
when the packet ethertype matches with the port ether type configured.
Otherw…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.1.1.3
fsMIPbPortSVlanEgressEtherTypedeprecated
This object specifies the ether type of the S-VLAN tag that has to
be applied for all the outgoing packets on this port. If a valid value is
in this object, all the packets which are outgoing on this port will
contain t…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.1.1.4
fsMIPbPortSVlanEtherTypeSwapStatus
This object specifies whether the Ether Type Swapping can be
applied on the S-VLAN tagged packets over this port.
The Ether type swapping will only be applied on S-VLAN tag of a packet.
This configuration is applicable …
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.1.1.5
fsMIPbPortSVlanTranslationStatus
This object specifies whether the VID Translation table can be
enabled on the incoming/outgoing packets on a particular port.
The Service Vlan swapping is applicable only for the externally
accessible network ports (i…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.1.1.6
fsMIPbPortUnicastMacLearningdeprecated
This object specifies a Truth value indicating the unicast MAC learning enabled/disabled
status for this port. When Unicast Mac Learning is disabled, No
Entry will be learned from the point of configuration on this port…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.1.1.7
fsMIPbPortUnicastMacLimit
This object specifies the Limiting value on the number of distinct unicast destination MAC
addresses that can be dynamically learnt over this interface.
The lower limit and upper limit value that can be SET for this obj…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2076.127.2.1.1.8
fsMIPbPortBundleStatus
This object specifies the a truth value indicating that Bundling
enabled/disabled on port, this Object can be enabled/disabled only for
CEP. For other ports setting and getting is not meaningful.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.1.1.9
fsMIPbPortMultiplexStatus
This object specifies a Truth value indicating that Bundling
enabled/disabled on port, this Object can be enabled/disabled only for
CEP. For other ports setting and getting is not meaningful.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.1.1.10

fsMIPbSrcMacSVlanTable

table
.1.3.6.1.4.1.2076.127.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbSrcMacSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbSrcMacSVlanTable' 
This object specifies a table containing per port, per SourceMAC based
Service VLAN classification information in the device. Entries can be
into this table only when the bridge is configured as a Provider Bridge
and the Port Type for this port is SET as Proprietary Customer
Edge Port / Proprietary Customer Network Port.
fsMIPbSrcMacSVlanEntry row .1.3.6.1.4.1.2076.127.2.2.1
This object specifies the Information controlling Service VLAN classification at this
specified port for an ingress frame with the specified Source
MAC address in the ethernet header of the frame.
Indexes
Column Syntax OID
fsMIPbSrcMacAddress
This object specifies the Source MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.2.2.1.1
fsMIPbSrcMacSVlan
This object specifies the Service VLAN ID assigned to frames received on this port when
the Source MAC address in the ethernet header of the frame is same
as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.2.1.2
fsMIPbSrcMacRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.2.1.3

fsMIPbDstMacSVlanTable

table
.1.3.6.1.4.1.2076.127.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbDstMacSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbDstMacSVlanTable' 
This object specifies a table containing per port, per Destination MAC based Service
VLAN classification information in the device. Entries can be 
configured into this table only when the bridge is configured 
as a Provider Bridge. An entry in this table is possible only when the
'Port Type' for this port is SET as Proprietary Customer Network Port
or Proprietary Customer Edge Port.
fsMIPbDstMacSVlanEntry row .1.3.6.1.4.1.2076.127.2.3.1
This object specifies the Information controlling Service VLAN classification at this
specified port for an ingress frame with the specified Destination MAC
address in the ethernet header of the frame.
Indexes
Column Syntax OID
fsMIPbDstMacAddress
This object specifies the Destination MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.2.3.1.1
fsMIPbDstMacSVlan
This object specifies the Service VLAN ID assigned to frames received on this port when
the Destination MAC address in the ethernet header of the frame is
same as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.3.1.2
fsMIPbDstMacRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.3.1.3

fsMIPbCVlanSrcMacSVlanTable

table
.1.3.6.1.4.1.2076.127.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbCVlanSrcMacSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbCVlanSrcMacSVlanTable' 
This object specifies the a table containing per Port, per Customer VLAN ID,
per Source MAC based S-VLAN classification information in the device.
Entries can be configured into this table only when the  bridge is
configured as a Provider Bridge. An entry in this table is
possible only when the 'PortType' for this port is SET as 
Proprietary Customer Edge Port / Proprietary Customer Network Port.
fsMIPbCVlanSrcMacSVlanEntry row .1.3.6.1.4.1.2076.127.2.4.1
This object specifies the Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Source MAC address in the ethernet he…
Indexes
Column Syntax OID
fsMIPbCVlanSrcMacCVlan
This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port OR the Customer VLAN ID for which the ingress
frame is classified to this specified port.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.4.1.1
fsMIPbCVlanSrcMacAddr
This object specifies the Source MAC address in the ethernet header of the
frame received on this port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.2.4.1.2
fsMIPbCVlanSrcMacSVlan
This object specifies the Service VLAN assigned to frames received on this port,
When the Classified Customer VLAN ID is same as specified in
this entry and When the Source MAC address in the ethernet header
of the fr…
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.4.1.3
fsMIPbCVlanSrcMacRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.4.1.4

fsMIPbCVlanDstMacSVlanTable

table
.1.3.6.1.4.1.2076.127.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbCVlanDstMacSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbCVlanDstMacSVlanTable' 
This object specifies a table containing per Port, per Customer VLAN ID,
per Destination MAC based S-VLAN classification information in the
device. Entries can be configured into this table only when the 
bridge is configured as a Provider Bridge. An entry in this table
is possible only when the 'Port Type' for this port is SET
as Proprietary Customer Edge Port / Proprietary Customer Network Port.
fsMIPbCVlanDstMacSVlanEntry row .1.3.6.1.4.1.2076.127.2.5.1
This object specifies the Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Destination MAC address in the ethern…
Indexes
Column Syntax OID
fsMIPbCVlanDstMacCVlan
This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.5.1.1
fsMIPbCVlanDstMacAddr
This object specifies the Destination MAC address in the ethernet header of the
frame received on this port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2076.127.2.5.1.2
fsMIPbCVlanDstMacSVlan
This object specifies the Service VLAN assigned to frames received on this port
when the Classified Customer VLAN ID and when the Destination
MAC address in the ethernet header of the frame is same as
specified in thi…
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.5.1.3
fsMIPbCVlanDstMacRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.5.1.4

fsMIPbDscpSVlanTable

table
.1.3.6.1.4.1.2076.127.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbDscpSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbDscpSVlanTable' 
This object specifies a table containing per port, per DiffServ 
Code Point (DSCP) value based Service VLAN classification information
in the device. Entries can be configured into this table only when the bridge is 
configured as a Provider Bridge and the 'PortType' for
this port is SET as Proprietary Customer Network Port or 
Proprietary Customer Edge Port.
fsMIPbDscpSVlanEntry row .1.3.6.1.4.1.2076.127.2.6.1
This object specifies the Information controlling Service VLAN
classification at this specified port for an ingress IP frame with the
DSCP value as specified in this entry.
Indexes
Column Syntax OID
fsMIPbDscp
This object specifies the DSCP value in the IP header of the
frame received on this port for which Service VLAN is assigned based
on this entry.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2076.127.2.6.1.1
fsMIPbDscpSVlan
This object specifies the Service VLAN ID assigned to IP
frames received on this port when the DSCP value in the IP header of
the frame is same as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.6.1.2
fsMIPbDscpRowStatus
This object specifies the status of this
entry. An entry is created in this table when this object is SET to
'createAndWait'. The entry in this table is used when the status of
this object is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.6.1.3

fsMIPbCVlanDscpSVlanTable

table
.1.3.6.1.4.1.2076.127.2.7 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbCVlanDscpSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbCVlanDscpSVlanTable' 
This object specifies a table containing per port, per Customer 
VLAN ID, per DiffServ Code Point (DSCP) value based Service VLAN
classification information in the device. Entries can be configured
into this table only when the bridge is configured as a Provider Bridge
and the 'PortType' for this port is SET as Proprietary Customer Edge
Port / Proprietary Customer Network Port.
fsMIPbCVlanDscpSVlanEntry row .1.3.6.1.4.1.2076.127.2.7.1
This object specifies the Information controlling Service VLAN
classification at this specified port for an ingress IP frame with the
classified Customer VLAN ID as specified in this entry and the DSCP value
in the fr…
Indexes
Column Syntax OID
fsMIPbCVlanDscpCVlan
This object specifies the Customer VLAN ID in the Customer
VLAN tag of an ingress frame at this specified port or the Customer
VLAN ID for which the ingress frame is classified for at this specified port.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.7.1.1
fsMIPbCVlanDscp
This object specifies the DSCP value in the IP header of the
frame received on this port.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2076.127.2.7.1.2
fsMIPbCVlanDscpSVlan
This object specifies the Service VLAN ID assigned to frames
received on this port, when the classified Customer VLAN ID is the
same as specified in this entry and when the DSCP value in the
IP header of the frame is s…
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.7.1.3
fsMIPbCVlanDscpRowStatus
This object specifies the status of this
entry. An entry is created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry i…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.7.1.4

fsMIPbSrcIpAddrSVlanTable

table
.1.3.6.1.4.1.2076.127.2.8 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbSrcIpAddrSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbSrcIpAddrSVlanTable' 
This object specifies a table containing per port, per Source IP 
Address, based Service VLAN classification information in the device.
Entries can be configured into this table only when the bridge is
configured as a Provider Bridge and the 'PortType' for this port is SET as
Proprietary Customer Network Port or Proprietary Customer Edge Port.
fsMIPbSrcIpAddrSVlanEntry row .1.3.6.1.4.1.2076.127.2.8.1
This object specifies the Information controlling Service VLAN
classification at this specified port for an ingress IP frame with the
Source IP Address in the IP header of the frame as specified in this entry.
Indexes
Column Syntax OID
fsMIPbSrcIpAddr
This object specifies the Source IP Address in the IP header of an ingress
IP frame at this specified port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.127.2.8.1.1
fsMIPbSrcIpSVlan
The Service VLAN ID assigned to frames ingress at this port
when the Source IP address in the IP header of the frame is
same as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.8.1.2
fsMIPbSrcIpRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.8.1.3

fsMIPbDstIpAddrSVlanTable

table
.1.3.6.1.4.1.2076.127.2.9 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbDstIpAddrSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbDstIpAddrSVlanTable' 
This object specifies a table containing per port, per Destination IP Address, based
Service VLAN classification information in the device. Entries can
be configured into this table only when the bridge is configured as 
a Provider Bridge and the 'PortType' for this port is SET
as Proprietary Customer Network Port or Proprietary Customer Edge Port.
fsMIPbDstIpAddrSVlanEntry row .1.3.6.1.4.1.2076.127.2.9.1
This object specifies the Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Destination IP
Address in the IP header of the frame as specified in this entry.
Indexes
Column Syntax OID
fsMIPbDstIpAddr
This object specifies the Destination IP Address in the IP header of an ingress
IP frame at this specified port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.127.2.9.1.1
fsMIPbDstIpSVlan
This object specifies the Service VLAN ID assigned to frames
ingress at this port when the Destination IP address in the IP header
of the frame is same as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.9.1.2
fsMIPbDstIpRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.9.1.3

fsMIPbSrcDstIpSVlanTable

table
.1.3.6.1.4.1.2076.127.2.10 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbSrcDstIpSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbSrcDstIpSVlanTable' 
This object specifies a table containing per port, per Source IP Address,
per Destination IP Address based Service VLAN classification information
in the device. Entries can be configured into this table only when the bridge
is configured as a Provider Bridge and the'PortType' for
this port is SET as Proprietary Customer Network Port or Proprietary 
Customer Edge Port.
fsMIPbSrcDstIpSVlanEntry row .1.3.6.1.4.1.2076.127.2.10.1
This object specifies Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Source and Destination
IP Address in the IP header of the frame as specified in this ent…
Indexes
Column Syntax OID
fsMIPbSrcDstSrcIpAddr
This object specifies the Source IP Address in the IP header of an ingress
IP frame at this specified port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.127.2.10.1.1
fsMIPbSrcDstDstIpAddr
This object specifies the Destination IP Address in the IP header of an ingress
IP frame at this specified port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.127.2.10.1.2
fsMIPbSrcDstIpSVlan
This object specifies the Service VLAN ID assigned to frames ingress at this port
when the Source and Destination IP address in the IP header of
the frame are same as specified in this entry.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.10.1.3
fsMIPbSrcDstIpRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.10.1.4

fsMIPbCVlanDstIpSVlanTable

table
.1.3.6.1.4.1.2076.127.2.11 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbCVlanDstIpSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbCVlanDstIpSVlanTable' 
This object specifies the A table containing per port, per Customer
VLAN ID, per Destination IP Address, based Service VLAN classification information in the 
device. Entries can be configured into this table only when the bridge
is configured as Provider Bridge or Provider Edge Bridge and the 
Port Type for this port is SET as Proprietary Customer Edge Port 
/ Proprietary Customer Network Port.
fsMIPbCVlanDstIpSVlanEntry row .1.3.6.1.4.1.2076.127.2.11.1
This object specifies the Information controlling Service VLAN classification at this specified
port for an ingress IP frame with the classified Customer VLAN ID as
specified in this entry and the Destination IP Addres…
Indexes
Column Syntax OID
fsMIPbCVlanDstIpCVlan
This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.11.1.1
fsMIPbCVlanDstIp
This object specifies the Destination IP Address in the IP header of an ingress
IP frame at this specified port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.127.2.11.1.2
fsMIPbCVlanDstIpSVlan
This object specifies the Service VLAN ID assigned to frames ingress at this port
when the classified Customer VLAN ID is same as specified in this entry
and the Destination IP address in the IP header of the frame is …
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.11.1.3
fsMIPbCVlanDstIpRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.11.1.4

fsMIPbPortBasedCVlanTable

table
.1.3.6.1.4.1.2076.127.2.12 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbPortBasedCVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbPortBasedCVlanTable' 
This object specifies a table containing Customer Edge Port / Proprietary
Customer Edge Port / Proprietary Customer Network Port mapping to Customer VLAN on a
 providerBridge. This table is used for a classifying a untagged frame 
 received on above mentioned customer ports.
fsMIPbPortBasedCVlanEntry row .1.3.6.1.4.1.2076.127.2.12.1
This object specifies an Entry in this table which will be
created whenever a port is configured as Customer Edge Port / Proprietary
Customer Edge Port / Proprietary Customer
Network Port. This Entry will be used on th…
Indexes
Column Syntax OID
fsMIPbPortCVlan
This object specifies the Customer VLAN ID assigned to untagged frames ingress at this
specified Customer Edge Port / Proprietary Customer Edge Port /
Proprietary Customer Network Port.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.127.2.12.1.1
fsMIPbPortCVlanClassifyStatus
This object specifies the C-VLAN classification status on a port.
This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP,
this object cannot be disabled.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.12.1.2
fsMIPbPortEgressUntaggedStatus
This object specifies whether to allow or drop untagged packets
from being transmitted on CEP port. When it is set to allow, untagged packets
will be allowed to be transmitted on CEP port. By default, the object is se…
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.2076.127.2.12.1.3

fsMIPbEtherTypeSwapTable

table
.1.3.6.1.4.1.2076.127.2.13 · 1 row entry · 3 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbEtherTypeSwapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbEtherTypeSwapTable' 
This object specifies a Table containing the Translation information of the ethertype for a 
Service VLAN in a given packet. This Table shall be used only at ingress 
and NOT at egress of the Customer Network Port / Proprietary Customer Network 
Port / Provider Network Port. This translation table is applicable for only
Service VLAN and not for customer VLAN's.
fsMIPbEtherTypeSwapEntry row .1.3.6.1.4.1.2076.127.2.13.1
This object specifies the entry containing the Local and Relay Ether type for a given packet on
a particular port. This entry shall be applicable on all types of ports
if and only if fsMIPbPortSVlanEtherTypeSwapStatus i…
Indexes
Column Syntax OID
fsMIPbLocalEtherType
This object specifies the Ether type present in the service vlan tag of the ingress packet at
the given port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.13.1.1
fsMIPbRelayEtherType
This object specifies the Relay Ether type mapped for the ether type present in the local
service vlan tag of the ingress packet at the given port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.13.1.2
fsMIPbEtherTypeSwapRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.127.2.13.1.3

fsMIPbSVlanConfigTable

table
.1.3.6.1.4.1.2076.127.2.14 · 1 row entry · 1 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbSVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbSVlanConfigTable' 
This object specifies the table to configure the service type supported by
an S-VLAN. Based on the service type configured for the S-VLAN, the oper point-to-point  
state of PEP ports will be determined. The service type SET for S-VLAN is
applicable only for the S-VLAN in specified Virtual Context identified by
the Virtual Context identifier in this entry.
fsMIPbSVlanConfigEntry row .1.3.6.1.4.1.2076.127.2.14.1
This object specifies the service type can be configured for an S-VLAN only when the VLAN
is already created in the system.
Indexes
Column Syntax OID
fsMIPbSVlanConfigServiceType
The object specifies the service type supported by the S-VLAN in the
Virtual Context. When it is set to 'eLine', the S-VLAN connects not more
than two customer interfaces. If the service type for a vlan is 'eLine',
t…
Enumerationr/w
Enumerated Values:
1eLine
2eLan
 .1.3.6.1.4.1.2076.127.2.14.1.1

fsMIPbTunnelProtocolTable

table deprecated
.1.3.6.1.4.1.2076.127.2.15 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbTunnelProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbTunnelProtocolTable' 
This object specifies the table containing information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x
and IGMP) inside service provider network.
fsMIPbTunnelProtocolEntry row .1.3.6.1.4.1.2076.127.2.15.1
This object specifies the entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridg…
Indexes
Column Syntax OID
fsMIPbTunnelProtocolDot1xdeprecated
This object specifies the object to specify whether to
peer/tunnel/discard the Dot1x packets received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.1
fsMIPbTunnelProtocolLacpdeprecated
This object specifies whether to peer/tunnel/discard the LACP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.2
fsMIPbTunnelProtocolStpdeprecated
This object specifies whether to peer/tunnel/discard the STP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.3
fsMIPbTunnelProtocolGvrpdeprecated
This object specifies whether to peer/tunnel/discard the GVRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.4
fsMIPbTunnelProtocolGmrpdeprecated
This object specifies whether to peer/tunnel/discard the GMRP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.5
fsMIPbTunnelProtocolIgmpdeprecated
This object specifies whether to peer/tunnel/discard the IGMP packets
received on this port.
TunnelStatusr/w
Type Values:
1peer
2tunnel
3discard
 .1.3.6.1.4.1.2076.127.2.15.1.6

fsMIPbTunnelProtocolStatsTable

table deprecated
.1.3.6.1.4.1.2076.127.2.16 · 1 row entry · 12 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbTunnelProtocolStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbTunnelProtocolStatsTable' 
This object specifies the table containing statistics information about the tunneled 
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received 
and transmitted over a port.
fsMIPbTunnelProtocolStatsEntry row .1.3.6.1.4.1.2076.127.2.16.1
This object specifies the Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridg…
Indexes
Column Syntax OID
fsMIPbTunnelProtocolDot1xPktsRecvddeprecated
This object specifies the number of tunneled Dot1x Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.1
fsMIPbTunnelProtocolDot1xPktsSentdeprecated
This object specifies the number of tunneled Dot1x Packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.2
fsMIPbTunnelProtocolLacpPktsRecvddeprecated
This object specifies the number of tunneled LACP Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.3
fsMIPbTunnelProtocolLacpPktsSentdeprecated
This object specifies the number of tunneled LACP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.4
fsMIPbTunnelProtocolStpPDUsRecvddeprecated
This object specifies the number of tunneled STP PDUs received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.5
fsMIPbTunnelProtocolStpPDUsSentdeprecated
This object specifies the number of tunneled STP PDUs transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.6
fsMIPbTunnelProtocolGvrpPDUsRecvddeprecated
This object specifies the number of tunneled GVRP PDUs received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.7
fsMIPbTunnelProtocolGvrpPDUsSentdeprecated
This object specifies the number of tunneled GVRP PDUs transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.8
fsMIPbTunnelProtocolGmrpPktsRecvddeprecated
This object specifies the number of tunneled GMRP PDUs packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.9
fsMIPbTunnelProtocolGmrpPktsSentdeprecated
This object specifies the number of tunneled GMRP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.10
fsMIPbTunnelProtocolIgmpPktsRecvddeprecated
This object specifies the number of tunneled IGMP packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.11
fsMIPbTunnelProtocolIgmpPktsSentdeprecated
This object specifies the number of tunnelled IGMP packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.16.1.12

fsMIPbPepExtTable

table
.1.3.6.1.4.1.2076.127.2.17 · 1 row entry · 1 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbPepExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbPepExtTable' 
This object specifies an extension of dot1adMIPepTable table, and it provides
additional configurations to PEPs (like Cos Preservations,..). 
when a entry in dot1adMIPepTable is created, then an entry will be
created in this table.
fsMIPbPepExtEntry row .1.3.6.1.4.1.2076.127.2.17.1
This object specifies the entry containing information like
(COS preservation, ..) for the internal PEPs. Creation of an entry in this
table is not allowed and only modification is allowed.
Indexes
No indexes recorded
Column Syntax OID
fsMIPbPepExtCosPreservation
This object is used to enable or disable COS preservation for a
service provided by this PEP.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.17.1.1

fsMIPbPortCVlanCounterTable

table
.1.3.6.1.4.1.2076.127.2.18 · 1 row entry · 8 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIPbPortCVlanCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIPROVIDERBRIDGE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIPROVIDERBRIDGE-MIB::fsMIPbPortCVlanCounterTable' 
This object specifies the table containing the statistics
information for a specific Customer VLAN and CEP port combination.
It contains number of Frames received and bytes received for 
a customer VLAN + CEP port.
fsMIPbPortCVlanCounterEntry row .1.3.6.1.4.1.2076.127.2.18.1
This object specifies each entry containing the customer VLAN
statistics for a port.
Indexes
Column Syntax OID
fsMIPbPortCVlanContextId
This object specifies the virtual context in the system.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.127.2.18.1.1
fsMIPbPortCVlanPort
This object specifies the interface index in the system.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.127.2.18.1.2
fsMIPbPortCVlanIndex
This object specifies the Customer VLAN ID for which statistics
collection information is available.
Unsigned32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.2076.127.2.18.1.3
fsMIPbPortCVlanCounterRxUcast
This object specifies the Number of unicast packets received for
each entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.18.1.4
fsMIPbPortCVlanCounterRxFrames
This object specifies the Number of frames(all types of packets)
received for each entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.18.1.5
fsMIPbPortCVlanCounterRxBytes
This object specifies the Number of bytes received for each entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.127.2.18.1.6
fsMIPbPortCVlanCounterStatus
This object specifies a Truth value indicating the statistics collection
is enabled/disabled for this customer vlan.
When statistics collection is set to disabled, stops collecting
statistics on a specific entry in th…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.127.2.18.1.7
fsMIPbPortCVlanClearCounter
This object is used to reset all the counter variables to initialization
value (zero).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2076.127.2.18.1.8