ARICENT-MIIPV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
210

fsMIIpv6ContextTable

table
.1.3.6.1.4.1.29601.2.35.1.1 · 1 row entry · 16 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6ContextTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6ContextTable' 
This table contains the global configurations for IPv6 for each VR.
fsMIIpv6ContextEntry row .1.3.6.1.4.1.29601.2.35.1.1.1
Each entry has the IPv6 global configuration for each VR.
Indexes
Column Syntax OID
fsMIIpv6NdCacheMaxRetries
This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability detection.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.35.1.1.1.1
fsMIIpv6PmtuConfigStatus
Flag to enable or disable Path MTU Discovery for the node.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.35.1.1.1.2
fsMIIpv6PmtuTimeOutInterval
The time in minutes after which the path MTU entry times out.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.1.1.3
fsMIIpv6JumboEnable
Flag to enable or disable IPv6 Jumbogram facility for the node.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.35.1.1.1.4
fsMIIpv6NumOfSendJumbo
Number of IPv6 Jumbograms sent from the node.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.1.1.5
fsMIIpv6NumOfRecvJumbo
Number of IPv6 Jumbograms received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.1.1.6
fsMIIpv6ErrJumbo
Number of IPv6 Error Jumbograms received or transmitted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.1.1.7
fsMIIpv6ContextDebug
Enables the tracing in the selected submodule in IP6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Co…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.1.1.8
fsMIIpv6RFC5095Compatibility
When the IPv6 node is configured to be RFC5095 compatible,
then it should treat Type 0 Routing Header as invalid
routing header type.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.1.1.9
fsMIIpv6RFC5942Compatibility
When the IPv6 node is configured to be RFC5942, ISS compatible
with RFC 5942 and prefix can be configured as on-link.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.1.1.10
fsMIIpv6SENDSecLevel
This Object specifies the sec level value for CGA generation in Secure Neighbor Discovery.
Note: For Sec values greater than zero, the above algorithm does not guaranty to terminate
after a certain number of iterations …
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.29601.2.35.1.1.1.11
fsMIIpv6SENDNbrSecLevel
This object specifies the sec level that are accepted from neighbors in Secure Neighbor
Discovery.
Note: CGA verification should be able to process all security parameter values, since
verification procedure is relative…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.29601.2.35.1.1.1.12
fsMIIpv6SENDAuthType
This object specifies the authorization type to be used in Secure Neighbor Discovery. The options include;
0 indicates only CGA authorization is required.
1 indicates only TA authorization is required.
2 indicates both …
Enumerationr/w
Enumerated Values:
0cga
1ta
2cgaandta
3cgaorta
 .1.3.6.1.4.1.29601.2.35.1.1.1.13
fsMIIpv6SENDMinBits
This object specifies the minimum acceptable key length.
Note: ISS supports only 512 and 1024 bits key.
Enumerationr/w
Enumerated Values:
512key512
1024key1024
 .1.3.6.1.4.1.29601.2.35.1.1.1.14
fsMIIpv6SENDSecDAD
This object specifies whether to accept the unsecured advertisements, when performing
DAD for Secure Neighbor Discovery in mixed mode. When enabled it implies that secured
advertisements are only accepted for first te…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.1.1.15
fsMIIpv6SENDPrefixChk
This object specifies the prefix and range check status in Secure Neighbor Discovery.
When enabled it indicates prefix and range checks are relaxed in host. When disabled
it indicates prefix and range checks are perfo…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.1.1.16

fsMIIpv6IfTable

table
.1.3.6.1.4.1.29601.2.35.1.2 · 1 row entry · 34 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6IfTable' 
The IPv6 Interface table contains information on the 
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical 
network layer attachment to the layer immediately below
IPv6. These include LAN interfaces, Point-to-Point interfaces, 
NBMA interfaces and IPv6 over IPv4 Tunnel interfaces.
fsMIIpv6IfEntry row .1.3.6.1.4.1.29601.2.35.1.2.1
An interface entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP.
Indexes
No indexes recorded
Column Syntax OID
fsMIIpv6IfType
The type of interface immediately `below' the network layer
in the protocol stack.
Enumeration
Enumerated Values:
6ethernetcsmacd
23ppp
24softwareLoopback
32framerelay
131tunnel
136l3ipvlan
 .1.3.6.1.4.1.29601.2.35.1.2.1.1
fsMIIpv6IfPortNum
This object identifies the 'interface' over which this
network interface operates and is dependent on the value of
fsMIIpv6IfType. This object reflects the ifindex value of
ifTable.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.29601.2.35.1.2.1.2
fsMIIpv6IfCircuitNum
This object identifies the circuit over which this network
interface operates and is dependent on the value of
fsMIIpv6IfType. If the data-link layer is Ethernet, PPP or
IPv4 Tunnel, this object can have only value of z…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.2.1.3
fsMIIpv6IfToken
The address token for this interface that is (at least)
unique on the link this interface is attached to. This token
can be specified only if the fsMIIpv6IfType is frame-relay(32). For
other interface types, the interf…
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.29601.2.35.1.2.1.4
fsMIIpv6IfOperStatus
The operational state of interface. It is up(1) if the
fsMIStdIpv6InterfaceEnableStatus is 'up' and the layer
below the network layer is also operational.
Otherwise it is down(2).
Enumeration
Enumerated Values:
1up
2down
3stale
 .1.3.6.1.4.1.29601.2.35.1.2.1.5
fsMIIpv6IfRouterAdvStatus
The router advertisement status on this interface. When
the object is set to enabled(1), router advertisements can be
allowed on the IPv6 interface. Otherwise, router advertisements
are not allowed.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.6
fsMIIpv6IfRouterAdvFlags
This object specifies the bits to be set in the router
advertisements sent by this entity on this interface.
M-bit set in the router advertisement indicates hosts
to configure an address by stateful protocol means. O-bi…
Enumerationr/w
Enumerated Values:
1mbit
2obit
3nombit
4noobit
5mobits
6none
 .1.3.6.1.4.1.29601.2.35.1.2.1.7
fsMIIpv6IfHopLimit
The Hop Limit value to be placed in the router advertisements
sent on this IPv6 interface.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.29601.2.35.1.2.1.8
fsMIIpv6IfDefRouterTime
The default router time to be indicated in the router
advertisements sent on this IPv6 interface. This defines the
time in seconds for which this entity acts as the default
router for all all hosts on the interface. A v…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.2.1.9
fsMIIpv6IfReachableTime
The reachable time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds that a neighboring
node is considered to be reachable after havi…
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.29601.2.35.1.2.1.10
fsMIIpv6IfRetransmitTime
The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted Neighbor Solicitations and is used during…
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.29601.2.35.1.2.1.11
fsMIIpv6IfDelayProbeTime
The time in seconds to delay before starting unreachability
probing of neighbor entries which are stale.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.35.1.2.1.12
fsMIIpv6IfPrefixAdvStatus
The prefix advertisement status on this IPv6 interface.
Object value enabled(1) allows the configured prefixes to
be advertised in router advertisements. Otherwise, the prefixes
are not sent in router advertisements.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.13
fsMIIpv6IfMinRouterAdvTime
The minimum time in seconds allowed between sending
unsolicited router advertisements.The default value is
one-third the default value of fsMIIpv6IfMaxRouterAdvTime.
The value can be configured in the range between 3 se…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.2.1.14
fsMIIpv6IfMaxRouterAdvTime
The maximum time in seconds between sending unsolicited
router advertisements. Router advertisements are sent
periodically at a random interval between the values
specified by fsMIIpv6IfMinRouterAdvTime and
fsMIIpv6IfMa…
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.29601.2.35.1.2.1.15
fsMIIpv6IfDADRetries
The maximum number of neighbor solicitations sent for
the purpose of duplicate address detection on a tentative
address.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.35.1.2.1.16
fsMIIpv6IfForwarding
This MIB object is used to configure IPv6 routing and forwarding on this interface.
The default value is set to enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.17
fsMIIpv6IfRoutingStatus
This MIB object indicates the current routing status
on this interface. This is based on the global IPv6
forwarding status of the mib object 'ipv6Forwarding'.
If 'ipv6Forwarding' is set to disabled, the routing
status i…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.18
fsMIIpv6IfIcmpErrInterval
Time interval between tokens being added to the ICMPv6 token bucket.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.29601.2.35.1.2.1.19
fsMIIpv6IfIcmpTokenBucketSize
Maximum number of tokens stored in the ICMPv6 bucket
Integer32r/w
Constraints:
range: 1-200
 .1.3.6.1.4.1.29601.2.35.1.2.1.20
fsMIIpv6IfDestUnreachableMsg
Indicates whether ICMPv6 destination unreachable messages are
enabled/disabled on this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.21
fsMIIpv6IfUnnumAssocIPIf
This object stores the interface index of the interface associated
with the unnumbered interface. The source IPv6 addresses used over
the Unnumbered interface in relation to the destination IPv6
address are borrowed fro…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.1.2.1.22
fsMIIpv6IfRedirectMsg
Indicates whether ICMPv6 redirect messages are
enabled/disabled on this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.23
fsMIIpv6IfAdvSrcLLAdr
Indicates whether source IPv6 Advertisement Link Layer
address flag enabled/disabled on this interface for router advertisement.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.24
fsMIIpv6IfAdvIntOpt
Indicates whether IPv6 Advertisement Interval Option
flag enabled/disabled on this interface for router advertisement.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.25
fsMIIpv6IfNDProxyAdminStatus
This object is used to enable or disable Neighbor
Discovery (ND) Proxy Feature on the interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.26
fsMIIpv6IfNDProxyMode
This Object is used to enable or disable Neighbor
Discovery (ND) Proxy feature in local subnet.
This object takes effect only when
ND Proxying is enabled on the interface.
When this object is set to local (2),
Router a…
Enumerationr/w
Enumerated Values:
1global
2local
 .1.3.6.1.4.1.29601.2.35.1.2.1.27
fsMIIpv6IfNDProxyOperStatus
This object specifies the current operational status
of Neighbor Discovery (ND) Proxy on this interface.
This object take effect only when ND Proxying is enabled
on the interface. When operational status is disabled on…
Enumeration
Enumerated Values:
1enabled
2inprogress
3disabled
 .1.3.6.1.4.1.29601.2.35.1.2.1.28
fsMIIpv6IfNDProxyUpStream
This object specifies whether the interface is an
upstream or downstream Proxy interface. This object
takes effect only when ND Proxying is enabled on the
interface. When set to true, the interface acts as an
Upstream…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.35.1.2.1.29
fsMIIpv6IfSENDSecStatus
This object specifies the admin status of Secure Neighbor Discovery
feature in the interface. The options include;
1 enables SeND on the interface,
2 disables SeND on the interface,
3 enables mixed mode on the interfac…
Enumerationr/w
Enumerated Values:
1secured
2unsecured
3mixed
 .1.3.6.1.4.1.29601.2.35.1.2.1.30
fsMIIpv6IfSENDDeltaTimestamp
This object specifies the Delta timestamp value for the interface
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.29601.2.35.1.2.1.31
fsMIIpv6IfSENDFuzzTimestamp
This object specifies the Fuzz timestamp value for the interface
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.29601.2.35.1.2.1.32
fsMIIpv6IfSENDDriftTimestamp
This object specifies the Drift timestamp value for the interface
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.35.1.2.1.33
fsMIIpv6IfDefRoutePreference
This object specifies the default router preference value
advertised through RA for the interface
Enumerationr/w
Enumerated Values:
0low
1medium
2high
 .1.3.6.1.4.1.29601.2.35.1.2.1.34

fsMIIpv6IfStatsTable

table
.1.3.6.1.4.1.29601.2.35.1.3 · 1 row entry · 16 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6IfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6IfStatsTable' 
IPv6 interface traffic statistics
fsMIIpv6IfStatsEntry row .1.3.6.1.4.1.29601.2.35.1.3.1
An interface statistics entry containing objects
at a particular IPv6 interface.
Indexes
Column Syntax OID
fsMIIpv6IfStatsTooBigErrors
The number of datagrams that could not be forwarded
because their size exceeded the Path MTU
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.1
fsMIIpv6IfStatsInRouterSols
The number of ICMP Router Solicit messages
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.2
fsMIIpv6IfStatsInRouterAdvs
The number of ICMP Router Advertisement messages
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.3
fsMIIpv6IfStatsInNeighSols
The number of ICMP Neighbor Solicit messages
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.4
fsMIIpv6IfStatsInNeighAdvs
The number of ICMP Neighbor Advertisement
messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.5
fsMIIpv6IfStatsInRedirects
The number of ICMP Redirect messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.6
fsMIIpv6IfStatsOutRouterSols
The number of ICMP Router Solicit messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.7
fsMIIpv6IfStatsOutRouterAdvs
The number of ICMP Router Advertisement messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.8
fsMIIpv6IfStatsOutNeighSols
The number of ICMP Neighbor Solicitation messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.9
fsMIIpv6IfStatsOutNeighAdvs
The number of ICMP Neighbor Advertisement messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.10
fsMIIpv6IfStatsOutRedirects
The number of Redirect messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.11
fsMIIpv6IfStatsLastRouterAdvTime
The time at which the last Periodic router advertisement was sent.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.12
fsMIIpv6IfStatsNextRouterAdvTime
The time at which the next Periodic router advertisement
is scheduled to be sent.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.13
fsMIIpv6IfStatsIcmp6ErrRateLmtd
No of rate limited ICMPv6 messgaes
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.14
fsMIIpv6IfStatsSENDDroppedPkts
This object displays the number of unsecured packets received
on a secured interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.15
fsMIIpv6IfStatsSENDInvalidPkts
This object displays the number of packets dropped due to failed
validation
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.3.1.16

fsMIIpv6AddrTable

table
.1.3.6.1.4.1.29601.2.35.1.4 · 1 row entry · 11 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6AddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6AddrTable' 
The table containing entity's IPv6 addressing information.
fsMIIpv6AddrEntry row .1.3.6.1.4.1.29601.2.35.1.4.1
The entry in the IPv6 Address Table which defines a
unicast, anycast or link-local address on an IPv6 interface.
Indexes
Column Syntax OID
fsMIIpv6AddrAddress
The IPv6 address to which this entry's addressing
information pertains.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.4.1.1
fsMIIpv6AddrPrefixLen
The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 bits.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.29601.2.35.1.4.1.2
fsMIIpv6AddrAdminStatus
Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv6 to be disabled on the interface. NotIn…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.35.1.4.1.3
fsMIIpv6AddrType
Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local address has the prefix '0xfe80'. This
ob…
Enumerationr/w
Enumerated Values:
1unicast
2anycast
3linklocal
 .1.3.6.1.4.1.29601.2.35.1.4.1.4
fsMIIpv6AddrProfIndex
Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this address. For a link-local address,
this object always takes the value zero and cannot…
Integer32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.29601.2.35.1.4.1.5
fsMIIpv6AddrOperStatus
Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicate Address Detection is not performed, th…
Enumeration
Enumerated Values:
1tentative
2complete
3down
4failed
 .1.3.6.1.4.1.29601.2.35.1.4.1.6
fsMIIpv6AddrContextId
Indicates the virtual router to which the IPv6 address is
applied.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.1.4.1.7
fsMIIpv6AddrScope
Scope is a 4-bit value that describes the scope of
an IPV6 address.An unicast address can possibly have 2
scopes (Linklocal and Global) only. A multicast address
can have a maximum of 11 scopes.The reserved scopes cann…
INET-ADDRESS-MIBInetScopeType
Type Values:
1interfaceLocal
2linkLocal
3subnetLocal
4adminLocal
5siteLocal
8organizationLocal
14global
 .1.3.6.1.4.1.29601.2.35.1.4.1.8
fsMIIpv6AddrSENDCgaStatus
This object displays the CGA generation status.
When true, it indicates that the address is cryptographically generated address(CGA).
When false, it indicates that the address is not a cryptographically generated addres…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.35.1.4.1.9
fsMIIpv6AddrSENDCgaModifier
This object stores the 128 bit modifier used for generating
cryptographically generated address (CGA).
Note: This object is defined as read-write object to enable it to be saved
and restored. Only read write objects are…
OctetStringr/w .1.3.6.1.4.1.29601.2.35.1.4.1.10
fsMIIpv6AddrSENDCollisionCount
This object stores the collision count for Duplicate Address Detection (DAD).
Note: This object is defined as read-write object to enable it to be saved
and restored. Only read write objects are stored during MSR.(Mib S…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.4.1.11

fsMIIpv6AddrProfileTable

table
.1.3.6.1.4.1.29601.2.35.1.5 · 1 row entry · 9 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6AddrProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6AddrProfileTable' 
The table containing information for an address or set of
addresses of the entity.
fsMIIpv6AddrProfileEntry row .1.3.6.1.4.1.29601.2.35.1.5.1
The entry in the IPv6 Address Profile Table which contains
parameters related to the advertisement of address prefixes.
An entry of this table other than the first entry is
created/deleted from SNMP.
Indexes
Column Syntax OID
fsMIIpv6AddrProfileIndex
A unique value identifying the particular IPv6 Address
profile entry. This is referred by fsMIIpv6AddrProfIndex of
IPv6 Address Table. The index 0 is created with default value
during system start-up and this entry is n…
Unsigned32
Constraints:
range: 0-200
 .1.3.6.1.4.1.29601.2.35.1.5.1.1
fsMIIpv6AddrProfileStatus
Indicates that the entry is valid or not. An entry other
than the first entry can be deleted by setting this object
to invalid(2).
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.29601.2.35.1.5.1.2
fsMIIpv6AddrProfilePrefixAdvStatus
If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised in router advertisements sent by this
entity. If it has value off(2), these address prefixe…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.29601.2.35.1.5.1.3
fsMIIpv6AddrProfileOnLinkAdvStatus
If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised with on-link flag set in the router
advertisements sent by this entity. These prefixes can…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.29601.2.35.1.5.1.4
fsMIIpv6AddrProfileAutoConfAdvStatus
If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised with autonomous address configuration
flag set in the router advertisements sent by this e…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.29601.2.35.1.5.1.5
fsMIIpv6AddrProfilePreferredTime
This object specifies the preferred lifetime in seconds
for the address prefixes corresponding to those addresses
which use this profile. This is sent in router advertisements
by this entity. A value of 4,294,967,295 r…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.1.5.1.6
fsMIIpv6AddrProfileValidTime
This object specifies the valid lifetime in seconds
for the address prefixes corresponding to those addresses
which use this profile. This is sent in router advertisements
by this entity. A value of 4,294,967,295 repre…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.1.5.1.7
fsMIIpv6AddrProfileValidLifeTimeFlag
By setting this flag to fixed (1),the router
advertisement Valid life time value is set
to fixed and by setting to variable(2), the
router advertisement Valid life time value
can decrease in real time. This flag wil…
Enumerationr/w
Enumerated Values:
1fixed
2variable
 .1.3.6.1.4.1.29601.2.35.1.5.1.8
fsMIIpv6AddrProfilePreferredLifeTimeFlag
By setting this flag to fixed (1),the router
advertisement Preferred life time value is set
to fixed and by setting to variable(2), the
router advertisement preferred life time value
can decrease in real time. This …
Enumerationr/w
Enumerated Values:
1fixed
2variable
 .1.3.6.1.4.1.29601.2.35.1.5.1.9

fsMIIpv6IcmpStatsTable

table
.1.3.6.1.4.1.29601.2.35.1.6 · 1 row entry · 35 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6IcmpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6IcmpStatsTable' 
The table of ICMP counter statistics for each virtual router.
fsMIIpv6IcmpStatsEntry row .1.3.6.1.4.1.29601.2.35.1.6.1
A conceptual row in the fsMIIpv6IcmpStatsTable.
Indexes
Column Syntax OID
fsMIIpv6IcmpInMsgs
The total number of ICMP messages which
the entity received. Note that this counter
includes all those counted by fsMIIpv6IcmpInErrors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.1
fsMIIpv6IcmpInErrors
The number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums, bad length, etc.).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.2
fsMIIpv6IcmpInDestUnreachs
The number of ICMP Destination Unreachable messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.3
fsMIIpv6IcmpInTimeExcds
The number of ICMP Time Exceeded messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.4
fsMIIpv6IcmpInParmProbs
The number of ICMP Parameter Problem messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.5
fsMIIpv6IcmpInPktTooBigs
The number of ICMP Packet Too Big messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.6
fsMIIpv6IcmpInEchos
The number of ICMP Echo (request) messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.7
fsMIIpv6IcmpInEchoReps
The number of ICMP Echo Reply messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.8
fsMIIpv6IcmpInRouterSolicits
The number of ICMP Router Solicit messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.9
fsMIIpv6IcmpInRouterAdvertisements
The number of ICMP Router Advertisement messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.10
fsMIIpv6IcmpInNeighborSolicits
The number of ICMP Neighbor Solicit messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.11
fsMIIpv6IcmpInNeighborAdvertisements
The number of ICMP Neighbor Advertisement
messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.12
fsMIIpv6IcmpInRedirects
The number of Redirect messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.13
fsMIIpv6IcmpInAdminProhib
Number of ICMP destination unreachable/communication
administratively prohibited messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.14
fsMIIpv6IcmpOutMsgs
The total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by icmpOutErrors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.15
fsMIIpv6IcmpOutErrors
The number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as a lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.16
fsMIIpv6IcmpOutDestUnreachs
The number of ICMP Destination Unreachable
messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.17
fsMIIpv6IcmpOutTimeExcds
The number of ICMP Time Exceeded messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.18
fsMIIpv6IcmpOutParmProbs
The number of ICMP Parameter Problem messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.19
fsMIIpv6IcmpOutPktTooBigs
The number of ICMP Packet Too Big messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.20
fsMIIpv6IcmpOutEchos
The number of ICMP Echo (request) messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.21
fsMIIpv6IcmpOutEchoReps
The number of ICMP Echo Reply messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.22
fsMIIpv6IcmpOutRouterSolicits
The number of ICMP Router Solicitation messages
sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.23
fsMIIpv6IcmpOutRouterAdvertisements
The number of ICMP Router Advertisement messages
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.24
fsMIIpv6IcmpOutNeighborSolicits
The number of ICMP Neighbor Solicitation
messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.25
fsMIIpv6IcmpOutNeighborAdvertisements
The number of ICMP Neighbor Advertisement
messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.26
fsMIIpv6IcmpOutRedirects
The number of Redirect messages sent. For
a host, this object will always be zero,
since hosts do not send redirects.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.27
fsMIIpv6IcmpOutAdminProhib
Number of ICMP destination unreachable/
communication administratively prohibited
messages sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.28
fsMIIpv6IcmpInBadCode
Number of received ICMP messages having unrecognized type of
message
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.29
fsMIIpv6IcmpInNARouterFlagSet
The number of ICMP Neighbor Advertisement
messages received with Router Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.30
fsMIIpv6IcmpInNASolicitedFlagSet
The number of ICMP Neighbor Advertisement
messages received with Solicited Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.31
fsMIIpv6IcmpInNAOverrideFlagSet
The number of ICMP Neighbor Advertisement
messages received with Override Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.32
fsMIIpv6IcmpOutNARouterFlagSet
The number of ICMP Neighbor Advertisement
messages sent with Router Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.33
fsMIIpv6IcmpOutNASolicitedFlagSet
The number of ICMP Neighbor Advertisement
messages sent with Solicited Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.34
fsMIIpv6IcmpOutNAOverrideFlagSet
The number of ICMP Neighbor Advertisement
messages sent with Override Flag Set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.6.1.35

fsMIIpv6PmtuTable

table
.1.3.6.1.4.1.29601.2.35.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6PmtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6PmtuTable' 
IPv6 Path MTU table. This table contains
an entry for a specific path traversed by
packets exchanged between the source and
destination nodes.
fsMIIpv6PmtuEntry row .1.3.6.1.4.1.29601.2.35.1.7.1
A Path MTU entry.
Indexes
Column Syntax OID
fsMIIpv6PmtuDest
The destination IPv6 address of the packets
to be exchanged.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.7.1.1
fsMIIpv6Pmtu
Indicates the path MTU value for the path.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.7.1.2
fsMIIpv6PmtuTimeStamp
Indicates the entry created time in the PMTU table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.7.1.3
fsMIIpv6PmtuAdminStatus
The desired status of the PmtuTable. This variable
has to be made valid(1) for creating a entry in the PmtuTable.
If set to invalid(2), the entry is deleted.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.29601.2.35.1.7.1.4

fsMIIpv6NDProxyListTable

table
.1.3.6.1.4.1.29601.2.35.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6NDProxyListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6NDProxyListTable' 
Configurable list of IPv6 Addresses for which
Proxy Neighbor Discovery is desired.
fsMIIpv6NDProxyListEntry row .1.3.6.1.4.1.29601.2.35.1.9.1
An entry in the ND Proxy List Table. Each
entry specifies the IPv6 address for which
proxy feature is needed.
Indexes
Column Syntax OID
fsMIIpv6NDProxyAddr
The IPV6 address for which the system has to act as a Proxy.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.9.1.1
fsMIIpv6NDProxyAdminStatus
The desired state of the ND Proxy list entry.
When set to create(1) the system acts as a Proxy for
the given address and when set to invalid(2) the
Proxy entry is deleted.
Enumerationr/w
Enumerated Values:
1create
2invalid
 .1.3.6.1.4.1.29601.2.35.1.9.1.2

fsMIIpv6PingTable

table
.1.3.6.1.4.1.29601.2.35.1.10 · 1 row entry · 22 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6PingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6PingTable' 
This entity's IPv6 Ping Table.
fsMIIpv6PingEntry row .1.3.6.1.4.1.29601.2.35.1.10.1
Contains the information about a particular IPv6 Ping
operation. An entry is created/deleted from SNMP.
Indexes
Column Syntax OID
fsMIIpv6PingIndex
A unique value identifying the particular IPv6 Ping entry.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.29601.2.35.1.10.1.1
fsMIIpv6PingDest
The IPv6 address of the destination to be pinged. This
should be a unicast or link-local address
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.10.1.2
fsMIIpv6PingIfIndex
The index value which uniquely identifies the IPv6
interface on which this Ping is to be sent. The interface
identified by a particular value of this index is the same
interface as identified by the same value of
fsMI…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.1.10.1.3
fsMIIpv6PingContextId
The Virtual Router in which the ping session is initiated.
The reachability of the destination will be determined in
the specified VR. When fsMIIpv6PingIfIndex is specified,
then the virtual router mapped to the interfa…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.1.10.1.4
fsMIIpv6PingAdminStatus
The desired status for the ping operation. This variable
has to be made up(1) for starting the ping operation.
If set to down(2), the ping is stopped but the statistics
will still be available. The entry is created whe…
Enumerationr/w
Enumerated Values:
1up
2down
3invalid
4create
 .1.3.6.1.4.1.29601.2.35.1.10.1.5
fsMIIpv6PingInterval
The time interval in seconds between successive pings
sent to the destination.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.35.1.10.1.6
fsMIIpv6PingRcvTimeout
The time in seconds after which this entity times out
waiting for a particular ping response.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.29601.2.35.1.10.1.7
fsMIIpv6PingTries
The number of times the destination is to be pinged.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.35.1.10.1.8
fsMIIpv6PingSize
The size of the data portion of the Ping packet.
Integer32r/w
Constraints:
range: 32-2080
 .1.3.6.1.4.1.29601.2.35.1.10.1.9
fsMIIpv6PingSentCount
Total number of packets sent to destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.10.1.10
fsMIIpv6PingAverageTime
The average value of the round trip time in seconds to this
destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.10.1.11
fsMIIpv6PingMaxTime
The maximum value of the round trip time in seconds to this
destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.10.1.12
fsMIIpv6PingMinTime
The minimum value of the round trip time in seconds to this
destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.10.1.13
fsMIIpv6PingOperStatus
The current status of this ping operation.
Enumeration
Enumerated Values:
1notInitiated
2inProgress
3completed
 .1.3.6.1.4.1.29601.2.35.1.10.1.14
fsMIIpv6PingSuccesses
The number of ping responses received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.35.1.10.1.15
fsMIIpv6PingPercentageLoss
Percentage of lost packets for which no responses were
received till timeout.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.35.1.10.1.16
fsMIIpv6PingData
Data that should be sent in the Ping message
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.29601.2.35.1.10.1.17
fsMIIpv6PingSrcAddr
Source address to be used for the ping
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.10.1.18
fsMIIpv6PingZoneId
Zone-Id shoule be able to identify a particular zone
of the address's scope. This Zone id applies
to all kinds of unicast and multicast addresses of
non-global scope except the unspecified address.
The zo…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.10.1.19
fsMIIpv6PingDestAddrType
The address type of the destination to be pinged.
other - unicast or linklocal address.
anycast - anycast address .An IPv6 packet cannot have anycast
address as source address. So fsipv6PingDestAddrType is used
to dis…
Enumerationr/w
Enumerated Values:
0other
2anycast
 .1.3.6.1.4.1.29601.2.35.1.10.1.20
fsMIIpv6PingHostName
This object specifies the DNS host name
used to send echo requests.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.1.10.1.21
fsMIIpv6PingContInterval
Specifies the interval for continuous ping operations.
A value of 0 indicates that continuous ping generation
is not enabled. Other values indicate that continuous
ping is enabled and that a new ping attempt (based on…
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.29601.2.35.1.10.1.22

fsMIIpv6AddrSelPolicyTable

table
.1.3.6.1.4.1.29601.2.35.1.12 · 1 row entry · 12 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6AddrSelPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6AddrSelPolicyTable' 
This table is used for default address selection in IPv6. This table is used to configure the Precedence
and Label associated with a source/destination address. The Address Selection Policy Table
contains the following default entries -
          
Prefix        Precedence  Label
::1/128               50     0
::/0                  40     1
2002::/16             30     2
::/96                 20     3
::ffff:0:0/96         10     4
          
A lookup of this table aids in selection of best source/destination address from amongst a candidate list.
fsMIIpv6AddrSelPolicyEntry row .1.3.6.1.4.1.29601.2.35.1.12.1
This table entry is used to configure the following parameters for an IPv6 source/destination address -
Prefix, PrefixLen,Ifindex,Preference,Label,Address Type,IsSelfAddress, IsAddressPublic,
IsAddressDeprecated, Reacha…
Indexes
Column Syntax OID
fsMIIpv6AddrSelPolicyPrefix
The IPv6 Address/Prefix for which the policy needs to be configured.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.12.1.1
fsMIIpv6AddrSelPolicyPrefixLen
The Prefix length associated with the IPV6 address identified by fsipv6AddrSelPolicyPrefix.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.29601.2.35.1.12.1.2
fsMIIpv6AddrSelPolicyIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. A value of 0 indicates that the associated address is reachable
via any interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.1.12.1.3
fsMIIpv6AddrSelPolicyScope
This MIB object identifies the scope of the IPv6 address. This can take the following values based on
whether the address is unicast/anycast or multicast.
0 reserved
1 Interface-Local scope
2 Link-Local scope
…
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.29601.2.35.1.12.1.4
fsMIIpv6AddrSelPolicyPrecedence
The precedence value associated with the address in the policy table. This value is applicable for
destination addresses.Higher the value, higher the precedence.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.29601.2.35.1.12.1.5
fsMIIpv6AddrSelPolicyLabel
The label value associated with the address in the policy table.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.1.12.1.6
fsMIIpv6AddrSelPolicyAddrType
This MIB object is used to configure an address as unicast/anycast/multicast, provided the
IPv6 address meets the validation criteria for the address type.
Enumerationr/w
Enumerated Values:
1unicast
2anycast
3multicast
 .1.3.6.1.4.1.29601.2.35.1.12.1.7
fsMIIpv6AddrSelPolicyIsPublicAddr
This MIB object indicates whether the address configured in the policy table is a private or public
address.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.29601.2.35.1.12.1.8
fsMIIpv6AddrSelPolicyIsSelfAddr
This MIB object indicates whether the given address is configured on the associated interface
and represents a self-address. The associated MIB object fsipv6AddrSelPolicyIfIndex takes
value true if the associated IPv6 a…
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.29601.2.35.1.12.1.9
fsMIIpv6AddrSelPolicyReachabilityStatus
This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable
Enumeration
Enumerated Values:
1reachable
2unreachable
 .1.3.6.1.4.1.29601.2.35.1.12.1.10
fsMIIpv6AddrSelPolicyConfigStatus
This MIB object indicates whether the associated entry in the Policy table is created automatically or
via the administrator.
Enumeration
Enumerated Values:
1automatic
2management
 .1.3.6.1.4.1.29601.2.35.1.12.1.11
fsMIIpv6AddrSelPolicyRowStatus
Administrative Status of the policy table. This object is used
to create or delete the entry in the policy table. The following values
are not supported for this MIB object - CREATE_AND_GO.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.35.1.12.1.12

fsMIIpv6IfScopeZoneMapTable

table
.1.3.6.1.4.1.29601.2.35.1.13 · 1 row entry · 17 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6IfScopeZoneMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6IfScopeZoneMapTable' 
A zone index identifies an instance of  a specific scope uniquely 
within the system.The zone index is used to associate unambiguously 
an IPv6 address to a specific zone.
          
Following are the changes that has been done in fsMIIpv6IfScopeZoneMapTable
          
    1) The Zone-Index which is of type InetZoneIndex in stdipvx.mib
       is changed to DisplayString for user convenience.As the user is 
       aware of the zones by the scope-zone name rather than the index
       (i.e Linklocal1 or sitelocal1,scope61,scope71) it has been changed 
       to DisplayString. But the index associated with the scope-zone is 
       displayed by ipv6ScopeZoneIndexTable.
    2) The InetZoneIndex definition in INET-ADDRESS-MIB says that the zone-index 
       will typically be the interface index for link-local address, but as per 
       the design the Zone-Index is taken as a free flowing number starting 
       from the value 1, hence the value of ipv6ScopeZoneIndexLinkLocal shall not be                                                 
       complaint with InetZoneIndex definition.
    3) It is also mentioned that the zone-index value of 0 refers to the default 
       zone. But the design implements the default scope-zone index for every                                                 
       scope by the fsipv6ScopeMemberEntry mib table. Hence the default-zone index 
       of value 0 is also not supported 
    4) The scope-zone index that are not configured on an interface shall take a
       alpha numeric value of invalid in FsMIIpv6IfScopeZoneMapEntry and -1 for the 
       index value in ipv6ScopeZoneIndexTable.
fsMIIpv6IfScopeZoneMapEntry row .1.3.6.1.4.1.29601.2.35.1.13.1
Each entry contains the list of scope identifiers on a given
interface. Its a unique value assigned for each scope on an
interface.
Indexes
Column Syntax OID
fsMIIpv6ScopeZoneIndexIfIndex
The index value that uniquely identifies the interface to
which these scopes belong. The interface identified by a
particular value of this index is the same interface as
identified by the same value of the IF-MIB's if…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.1.13.1.1
fsMIIpv6ScopeZoneIndexInterfaceLocal
The zone index for the Interface local scope on this interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.2
fsMIIpv6ScopeZoneIndexLinkLocal
The zone index for the link-local scope on this interface.
The index value corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexLinkLocal
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.3
fsMIIpv6ScopeZoneIndex3
The zone index for scope 3 on this interface. The index value corresponding
to this scope-zone can be known from ipv6ScopeZoneIndex3
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.4
fsMIIpv6ScopeZoneIndexAdminLocal
The zone index for the admin-local scope on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.5
fsMIIpv6ScopeZoneIndexSiteLocal
The zone index for the site-local scope on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.6
fsMIIpv6ScopeZoneIndex6
The zone index for scope 6 on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.7
fsMIIpv6ScopeZoneIndex7
The zone index for scope 7 on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.8
fsMIIpv6ScopeZoneIndexOrganizationLocal
The zone index for the organization-local scope on this
interface.The index value corresponding to this scope-zone
can be known from ipv6ScopeZoneIndexOrganizationLocal
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.9
fsMIIpv6ScopeZoneIndex9
The zone index for scope 9 on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndex9
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.10
fsMIIpv6ScopeZoneIndexA
The zone index for scope A on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexA
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.11
fsMIIpv6ScopeZoneIndexB
The zone index for scope B on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexB
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.12
fsMIIpv6ScopeZoneIndexC
The zone index for scope C on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexC
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.13
fsMIIpv6ScopeZoneIndexD
The zone index for scope D on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexD
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.14
fsMIIpv6ScopeZoneIndexE
The zone index for scope E on this interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.13.1.15
fsMIIpv6IfScopeZoneCreationStatus
Flag to determine if the scope-zone index is configured automatically
or by configuration.When an IPv6 interface is created by default the
linklocal scope is created and the creation status of it is automatic.When
a use…
Enumeration
Enumerated Values:
0notcreated
1automatic
2mgmt
3overridden
 .1.3.6.1.4.1.29601.2.35.1.13.1.16
fsMIIpv6IfScopeZoneRowStatus
The rowstatus of the scope-zone index table, used in
accordance to creation and deletion of scope-zones.To create
a row in this table manager sets this object to createAndGo(4).
The rowentry can be deleted automaticall…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.35.1.13.1.17

fsMIIpv6ScopeZoneTable

table
.1.3.6.1.4.1.29601.2.35.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6ScopeZoneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6ScopeZoneTable' 
The table is used to map each scope-zone index 
with the interface to which it has been associated.
This table is indeed used while forwarding packets 
to find out what all interfaces belong to a particular 
scope-zone
fsMIIpv6ScopeZoneEntry row .1.3.6.1.4.1.29601.2.35.1.14.1
An entry in the Scope-Zone Index Member Table.Each
entry specifies the interface indices associated with
a particular scope-zone index
Indexes
Column Syntax OID
fsMIIpv6ScopeZoneContextId
The Virtual Router in which the scope-zone is created.
The reachability of the destination will be determined in
the specified VR.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.1.14.1.1
fsMIIpv6ScopeZoneName
Displays the scope zone name value(i.e linklocal1,
interfacelocal2) for the scope-zone index
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.29601.2.35.1.14.1.2
fsMIIpv6ScopeZoneIndex
A unique value for each scope
on an interface. It is recommended that values are
assigned contiguously starting from 1.
INET-ADDRESS-MIBInetZoneIndex .1.3.6.1.4.1.29601.2.35.1.14.1.3
fsMIIpv6ScopeZoneCreationStatus
Flag to determine if the scope-zone index is configured automatically
or by configuration.When an IPv6 interface is created by default the
linklocal scope is created and the creation status of it is automatic.When
a use…
Enumeration
Enumerated Values:
1automatic
2mgmt
3overridden
 .1.3.6.1.4.1.29601.2.35.1.14.1.4
fsMIIpv6ScopeZoneInterfaceList
This MIB object displays all the interfaces that are part of/members of this
scope-zone index. These interfaces have the corresponding bit set in the octetlist.
InterfaceList .1.3.6.1.4.1.29601.2.35.1.14.1.5
fsMIIpv6IsDefaultScopeZone
yes- indicates that zone is default zone for the associated scope
No - indicates that zone is not the default zone for the associated scope.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.29601.2.35.1.14.1.6

fsMIIpv6RARouteInfoTable

table
.1.3.6.1.4.1.29601.2.35.1.15 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6RARouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6RARouteInfoTable' 
This table contains the information about the more specific route which
are advertised through route information option in router
advertisement message.
fsMIIpv6RARouteInfoEntry row .1.3.6.1.4.1.29601.2.35.1.15.1
The entry in the IPv6 Address specific route information Table
which defines a route to be advertised in the router advertisement
message send on an IPv6 interface.
Indexes
Column Syntax OID
fsMIIpv6RARouteIfIndex
The index value which uniquely identifies the IPv6
interface on which this route information entry is
to be advertised. The interface identified by a
particular value of this index is the same interface
as identified by…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.1.15.1.1
fsMIIpv6RARoutePrefix
The IPv6 specific route to which this entry's route
information pertains.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.29601.2.35.1.15.1.2
fsMIIpv6RARoutePrefixLen
The length of the prefix (in bits) associated with
the IPv6 address prefix of this entry.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.29601.2.35.1.15.1.3
fsMIIpv6RARoutePreference
The preference value of this route information
entry.
Enumerationr/w
Enumerated Values:
0low
1medium
2high
 .1.3.6.1.4.1.29601.2.35.1.15.1.4
fsMIIpv6RARouteLifetime
The Lifetime of this route information entry
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.1.15.1.5
fsMIIpv6RARouteRowStatus
This object is used to create or delete the entry in the RARouteTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.35.1.15.1.6

fsMIIpv6PrefTable

table
.1.3.6.1.4.1.29601.2.35.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6PrefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6PrefTable' 
The IPv6 Preference table contains information on the 
Preference Value for each supported protocol.
fsMIIpv6PrefEntry row .1.3.6.1.4.1.29601.2.35.2.1.1
An entry containing objects about a particular protocols
preference value.
Indexes
Column Syntax OID
fsMIIpv6Protocol
A unique value identifying the protocol whose preference
value needs to be processed.
Enumeration
Enumerated Values:
1other
2local
3netmgmt
4ndisc
5rip
6ospf
7bgp
8idrp
9igrp
 .1.3.6.1.4.1.29601.2.35.2.1.1.1
fsMIIpv6Preference
Preference of the route learned by a particular protocol.
This value is used while choosing the best path.
Lesser the value, highest is the preference.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.35.2.1.1.2

fsMIIpv6IfRaRDNSSTable

table
.1.3.6.1.4.1.29601.2.35.4.1 · 1 row entry · 18 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsMIIpv6IfRaRDNSSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-MIIPV6-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-MIIPV6-MIB::fsMIIpv6IfRaRDNSSTable' 
The IPv6 RDNSS table contains information on the
entity's RADVD confi on which IPv6.
fsMIIpv6IfRaRDNSSEntry row .1.3.6.1.4.1.29601.2.35.4.1.1
RDNSS entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP.
Indexes
Column Syntax OID
fsMIIpv6IfRaRDNSSIndex
A unique value identifying the particular IPv6
interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.35.4.1.1.1
fsMIIpv6IfRadvRDNSSOpen
If this object has value on(1), indicates that RDNSS continues to
be available to hosts even if they moved to a different subnet.
If it has value off(2),RDNSS will not be available to hosts.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.29601.2.35.4.1.1.2
fsMIIpv6IfRaRDNSSPreference
The preference of the DNS server, compared to other DNS servers
is advertised and used.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.29601.2.35.4.1.1.3
fsMIIpv6IfRaRDNSSLifetime
The maximum duration how long the RDNSS entries are used for
name resolution. A value of 0 means the nameserver should no
longer be used. The maximum duration how long the RDNSS entries
are used for name resol…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.4
fsMIIpv6IfRaRDNSSAddrOne
The IPv6 address to which this entry's addressing
information pertains.
Ipv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.29601.2.35.4.1.1.5
fsMIIpv6IfRaRDNSSAddrTwo
The IPv6 address to which this entry's addressing
information pertains.
Ipv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.29601.2.35.4.1.1.6
fsMIIpv6IfRaRDNSSAddrThree
The IPv6 address to which this entry's addressing
information pertains.
Ipv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.29601.2.35.4.1.1.7
fsMIIpv6IfRaRDNSSRowStatus
The RDNSS row status to which this entry's radvd
information pertains.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.35.4.1.1.8
fsMIIpv6IfDomainNameOne
The DNS Domain name to which this entry's domainname
information pertains.
OctetStringr/w
Constraints:
range: 255-255
 .1.3.6.1.4.1.29601.2.35.4.1.1.9
fsMIIpv6IfDomainNameTwo
The DNS Domain name to which this entry's domainname
information pertains.
OctetStringr/w
Constraints:
range: 255-255
 .1.3.6.1.4.1.29601.2.35.4.1.1.10
fsMIIpv6IfDomainNameThree
The DNS Domain name to which this entry's domainname
information pertains.
OctetStringr/w
Constraints:
range: 255-255
 .1.3.6.1.4.1.29601.2.35.4.1.1.11
fsMIIpv6IfDnsLifeTime
Life time to be configured for the connected router
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.35.4.1.1.12
fsMIIpv6IfRaRDNSSAddrOneLife
The maximum duration how long the RDNSS entries are used for
name resolution. A value of 0 means the nameserver should no
longer be used. The maximum duration how long the RDNSS entries
are used for name resol…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.13
fsMIIpv6IfRaRDNSSAddrTwoLife
The maximum duration how long the RDNSS entries are used for
name resolution. A value of 0 means the nameserver should no
longer be used. The maximum duration how long the RDNSS entries
are used for name resol…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.14
fsMIIpv6IfRaRDNSSAddrThreeLife
The maximum duration how long the RDNSS entries are used for
name resolution. A value of 0 means the nameserver should no
longer be used. The maximum duration how long the RDNSS entries
are used for name resol…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.15
fsMIIpv6IfDomainNameOneLife
Life time to be configured for the connected router
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.16
fsMIIpv6IfDomainNameTwoLife
Life time to be configured for the connected router
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.17
fsMIIpv6IfDomainNameThreeLife
Life time to be configured for the connected router
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.35.4.1.1.18