ARICENT-LLDP-MIB Table View

This table contains one or more rows per port information
associated with the local system known to this agent.

fsLldpLocPortEntry row .1.3.6.1.4.1.2076.158.2.3.1

Information about a particular port component.
Entries may be created and deleted in this table by the
agent.

Indexes

LLDP-MIBlldpLocPortNum

Column	Syntax	OID
fsLldpLocPortIdSubtype The type of port identifier encoding used to identify the port component associated with the local port. When port id subtype is configured as portcomp/local it is mandatory to configure the fsLldpLocPor…	Enumerationr/w Enumerated Values: 1 ifalias 2 portcomp 3 macaddr 4 nwaddr 5 ifname 6 agentcircuitid 7 local	.1.3.6.1.4.1.2076.158.2.3.1.1
fsLldpLocPortId The string value used to identify the port component associated with the local port. Write operation to this object is allowed only when the port id subtype is configured as portcomp/local. …	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.2076.158.2.3.1.2
fsLldpPortConfigNotificationType This object is used to set the notification type. If the associated fsLldpNotificationType object has a value of remTabChg (1), then LLDP agent sends trap notification to NMS whenever remote table cha…	Enumerationr/w Enumerated Values: 1 remTabChg 2 misCfg 3 remTabChgAndMisCfg	.1.3.6.1.4.1.2076.158.2.3.1.3
fsLldpLocPortDstMac The MAC address to be used as destination MAC for the LLDP agent. The default value would be the LLDP multicast MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.158.2.3.1.4
fsLldpMedAdminStatus This object is used to enable or disable the LLDP-MED functionality in particular port. A value of 'enabled' (1) indicates that LLDP-MED functionality is enabled on the port. A value of 'disabled' (2) indicates that …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.158.2.3.1.5
fsLldpLocPortExpReset This object supports enabling/disabling automatic port PoE reset upon LLDP neighbor data expiration. When enabled, neighbor expiration causes the PoE administrative state to be toggled (disabled/enabled) for the port. …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.158.2.3.1.6
fsLldpLocPortExpResetCount Increments each time the PoE administrative state is toggled (disabled/enabled) for the port based on LLDP neighbor data expiration.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.158.2.3.1.7
fsLldpLocPortAutoMedVoiceDisc This object supports enabling/disabling automatic LLDP-MED VoIP device discovery processing. When enabled, received LLDP-MED data is examined to determine if automated voice VLAN-related settings should be dynamically u…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.158.2.3.1.8
fsLldpLocPortMgmtAddrTlvTx This object supports enabling/disabling Mgmt-Addr basic TLV transmission on a per-port basis independent of specific management addresses. When enabled, configured management addresses are marked for inclusion in the …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2076.158.2.3.1.9

The table is a enhancement of lldpLocManAddrTable in stdlldp.mib.

fsLldpManAddrConfigEntry row .1.3.6.1.4.1.2076.158.2.4.1

Proprietary objects for management address table.
The table maintains the oper status of the management address.
This table arguments lldpLocManAddrEntry.
The fsLldpManAddrConfigOperStatus entry will be applicable for e…

Indexes

No indexes recorded

Column	Syntax	OID
fsLldpManAddrConfigOperStatus This object gives the operational status of the corresponding management address in the lldpLocManAddrTable.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2076.158.2.4.1.1

In this table lldpV2LocPortIfIndex & lldpV2RemLocalDestMACAddress acts as
index & the variable lldpLocPortNum acts as variable for the table.

fslldpv2ConfigPortMapEntry row .1.3.6.1.4.1.2076.158.5.2.1

In this table lldpV2LocPortIfIndex & lldpV2RemLocalDestMACAddress
acts as index & the variable lldpLocPortNum acts as variable for the table

Indexes

fslldpv2ConfigPortMapIfIndex fslldpv2ConfigPortMapDestMacAddress

Column	Syntax	OID
fslldpv2ConfigPortMapIfIndex The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used as an index to the lldpV2LocPortTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2076.158.5.2.1.1
fslldpv2ConfigPortMapDestMacAddress The MAC address associated with this entry. The octet string identifies an individual or a group MAC address that is in use by LLDP as a destination MAC address. The MAC address is encoded in the octet string in canonic…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.158.5.2.1.2
fslldpv2ConfigPortMapNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.	LLDP-MIBLldpPortNumber Type Constraints: range: 1..4096	.1.3.6.1.4.1.2076.158.5.2.1.3
fslldpv2ConfigPortRowStatus Row status for the ring context entry. An entry can be created in this table, only when the corresponding virtual context is created in the system. Only 'createAndGo', and 'destroy' values are allowed for…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.158.5.2.1.4

The table that contains the set of MAC addresses used
by LLDP for transmission and reception of LLDPDUs.

fslldpV2DestAddressTableEntry row .1.3.6.1.4.1.2076.158.5.3.1

Destination MAC address information for LLDP.

This configuration parameter identifies a MAC address
corresponding to a LldpV2DestAddressTableIndex value.

Rows in this table are created as neces…

Indexes

fslldpV2AddressTableIndex

Column	Syntax	OID
fslldpV2AddressTableIndex The index value used to identify the destination MAC address associated with this entry. The value of this object is used as an index to the lldpV2DestAddressTable.	LLDP-V2-TC-MIBLldpV2DestAddressTableIndex Type Constraints: range: 1..4096	.1.3.6.1.4.1.2076.158.5.3.1.1
fslldpV2DestMacAddress The MAC address associated with this entry. The octet string identifies an individual or a group MAC address that is in use by LLDP as a destination MAC address. The MAC address is encoded in the octet st…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2076.158.5.3.1.2
fslldpv2DestRowStatus Row status for the ring context entry. An entry can be created in this table, only when the corresponding virtual context is created in the system. Only 'createAndGo', and 'destroy' values are allowed for…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2076.158.5.3.1.3

This table is an enhancement of lldpV2StatsTxPortTable
in standard LLDPv2 MIB.

fsLldpStatsTaggedTxPortEntry row .1.3.6.1.4.1.2076.158.5.4.1

Proprietary objects for lldpV2StatsTxPortTable.This table
maintains the transmission count for tagged LLDP-PDU frames
transmitted on a port.

Indexes

No indexes recorded

Column	Syntax	OID
fsLldpStatsTaggedTxPortFramesTotal The number of tagged LLDP frames transmitted by this LLDP agent on the indicated port.	LLDP framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.158.5.4.1.1