ARICENT-LLDP-MED-MIB Table View

This table controls the selection of LLDP-MED TLVs to be transmitted
on individual ports.

fsLldpMedPortConfigEntry row .1.3.6.1.4.1.29601.2.101.1.1.1

This object specifies the LLDP-MED configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.

This object augments the lldpV2PortCo…

Indexes

No indexes recorded

Column	Syntax	OID
fsLldpMedPortCapSupported This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap correspo…	LLDP-EXT-MED-MIBLldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.3.6.1.4.1.29601.2.101.1.1.1.1
fsLldpMedPortConfigTLVsTxEnable This object includes the MED organizationally defined a set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associ…	LLDP-EXT-MED-MIBLldpXMedCapabilitiesr/w Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.3.6.1.4.1.29601.2.101.1.1.1.2

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

fsLldpMedLocMediaPolicyEntry row .1.3.6.1.4.1.29601.2.101.1.2.1

This object specifies information about a particular policy on a specific
port component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex fsLldpMedLocMediaPolicyAppType

Column	Syntax	OID
fsLldpMedLocMediaPolicyAppType This object specifies the media type that defines the primary function of the application for the policy advertised by an endpoint.	LLDP-EXT-MED-MIBPolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.3.6.1.4.1.29601.2.101.1.2.1.1
fsLldpMedLocMediaPolicyVlanID This object specifies an extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.29601.2.101.1.2.1.2
fsLldpMedLocMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.101.1.2.1.3
fsLldpMedLocMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.29601.2.101.1.2.1.4
fsLldpMedLocMediaPolicyUnknown This object indicates that the network policy for the specified application type is currently unknown when the value is set as 'true'. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignor…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.101.1.2.1.5
fsLldpMedLocMediaPolicyTagged This object indicates that the application is using a tagged VLAN when the value set as 'true'. This object indicates that for the specific application the device either is using an untagged VLAN or does not support po…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.101.1.2.1.6
fsLldpMedLocMediaPolicyRowStatus This object creates, modifies, and/or deletes a row in the table. All the objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. To modify one or more…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.101.1.2.1.7

This table specifies the augmented MIB of lldpXMedLocLocationTable.
Currently, this MIB table contains Row Status object to control 
the creation, deletion and modification of each row in lldpXMedLocLocationTable.
          
The information in this table MUST be stored in non-volatile-memory
and persist over restart/reboot sequences.

fsLldpMedLocLocationEntry row .1.3.6.1.4.1.29601.2.101.1.3.1

This object is used to augment the lldpXMedLocLocationEntry of
the LLDP-EXT-MED-MIB, therefore it is only present along with the location
configuration defined by the associated lldpXMedLocLocationEntry
entry.

Indexes

No indexes recorded

Column	Syntax	OID
fsLldpMedLocLocationRowStatus This object is used to create, modify, and/or delete a row in the table. All the objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. To modify one o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.101.1.3.1.1

This table displays LLDP-MED capabilities of remote devices
connected to individual ports.

fsLldpXMedRemCapabilitiesEntry row .1.3.6.1.4.1.29601.2.101.2.1.1

This object specifies LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.

The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populat…

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fsLldpXMedRemCapSupported This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap cor…	LLDP-EXT-MED-MIBLldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.3.6.1.4.1.29601.2.101.2.1.1.1
fsLldpXMedRemCapCurrent This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap cor…	LLDP-EXT-MED-MIBLldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.3.6.1.4.1.29601.2.101.2.1.1.2
fsLldpXMedRemDeviceClass This object specifies a device Class as advertised by the device remotely connected to the port.	LLDP-EXT-MED-MIBLldpXMedDeviceClass Type Values: 0 notDefined 1 endpointClass1 2 endpointClass2 3 endpointClass3 4 networkConnectivity	.1.3.6.1.4.1.29601.2.101.2.1.1.3

This table contains media policy information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemMediaPolicyEntry row .1.3.6.1.4.1.29601.2.101.2.2.1

This object specifies information about the per port per policy type policy
information for a particular physical network connection.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex fsLldpXMedRemMediaPolicyAppType

Column	Syntax	OID
fsLldpXMedRemMediaPolicyAppType This object specifies the media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.	LLDP-EXT-MED-MIBPolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.3.6.1.4.1.29601.2.101.2.2.1.1
fsLldpXMedRemMediaPolicyVlanID This object specifies an extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.29601.2.101.2.2.1.2
fsLldpXMedRemMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.29601.2.101.2.2.1.3
fsLldpXMedRemMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.29601.2.101.2.2.1.4
fsLldpXMedRemMediaPolicyUnknown This object indicates that the network policy for the specified application type is currently unknown when the value is set as 'true'. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignor…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.101.2.2.1.5
fsLldpXMedRemMediaPolicyTagged This object indicates that the application is using a tagged VLAN when the value is set as 'true'. This object indicates that for the specific application the device either is using an untagged VLAN or does not support …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.101.2.2.1.6

This table contains inventory information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set

fsLldpXMedRemInventoryEntry row .1.3.6.1.4.1.29601.2.101.2.3.1

This object specifies information about inventory information for the remote devices
connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fsLldpXMedRemHardwareRev This object specifies the vendor-specific hardware revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.1
fsLldpXMedRemFirmwareRev This object specifies the vendor-specific firmware revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.2
fsLldpXMedRemSoftwareRev This object specifies the vendor-specific software revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.3
fsLldpXMedRemSerialNum This object specifies the vendor-specific serial number as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.4
fsLldpXMedRemMfgName This object specifies the vendor-specific manufacturer name as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.5
fsLldpXMedRemModelName This object specifies the vendor-specific model name as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.6
fsLldpXMedRemAssetID This object specifies the vendor-specific asset tracking identifier as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.29601.2.101.2.3.1.7

This table contains Location information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the Location(3) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemLocationEntry row .1.3.6.1.4.1.29601.2.101.2.4.1

This object specifies information about Location information
for the remote devices connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex LLDP-EXT-MED-MIBlldpXMedRemLocationSubtype

Column	Syntax	OID
fsLldpXMedRemLocationInfo This object specifies the location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding fsLldpXMedRemLocation…	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.29601.2.101.2.4.1.1

This table contains extended PoE information as advertised
by the remote devices of PD type.
          
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPD(5) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemXPoEPDEntry row .1.3.6.1.4.1.29601.2.101.2.5.1

Information about XPoEPD information for the remote devices
connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fsLldpXMedRemXPoEDeviceType Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A val…	Enumeration Enumerated Values: 1 unknown 2 pseDevice 3 pdDevice 4 none	.1.3.6.1.4.1.29601.2.101.2.5.1.1
fsLldpXMedRemXPoEPDPowerReq This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts.	tenth of wattUnsigned32 Constraints: range: 0-1023	.1.3.6.1.4.1.29601.2.101.2.5.1.2
fsLldpXMedRemXPoEPDPowerSource This object specifies the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received f…	Enumeration Enumerated Values: 1 unknown 2 fromPSE 3 local 4 localAndPSE	.1.3.6.1.4.1.29601.2.101.2.5.1.3
fsLldpXMedRemXPoEPDPowerPriority This object specifies the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RF…	Enumeration Enumerated Values: 1 unknown 2 critical 3 high 4 low	.1.3.6.1.4.1.29601.2.101.2.5.1.4

This table containing LLDP MED transmission statistics for
individual port/destination address combinations.

fsLldpMedStatsEntry row .1.3.6.1.4.1.29601.2.101.3.1.1

This object specifies LLDP MED frame transmission statistics for a particular port
and destination MAC address.

All counter values in a particular entry shall be
maintained on a continuing basis and shall n…

Indexes

fsLldpMedStatsIfIndex fsLldpMedStatsDestMACAddress

Column	Syntax	OID
fsLldpMedStatsIfIndex This object specifies the interface index value that is used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used as an index to …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.29601.2.101.3.1.1.1
fsLldpMedStatsDestMACAddress This object specifies the index value that is used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the MAC address can be found. …	LLDP-V2-TC-MIBLldpV2DestAddressTableIndex Type Constraints: range: 1..4096	.1.3.6.1.4.1.29601.2.101.3.1.1.2
fsLldpMedStatsTxFramesTotal This object specifies the number of LLDP-MED frames transmitted by the LLDP agent on the indicated port to the destination MAC address associated with this row of the table.	LLDP framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.3
fsLldpMedStatsRxFramesTotal This object specifies the number of valid LLDP-MED frames received by the LLDP agent on the indicated port, while this LLDP agent is enabled.	LLDP framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.4
fsLldpMedStatsRxFramesDiscardedTotal This object specifies the number of LLDP-MED frames received by the LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formatting problems may ex…	LLDP framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.5
fsLldpMedStatsRxTLVsDiscardedTotal This object specifies the number of LLDP-MED TLVs discarded for any reason by the LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.6
fsLldpMedStatsRxCapTLVsDiscarded This object specifies the number of LLDP MED Capability TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.7
fsLldpMedStatsRxPolicyTLVsDiscarded This object specifies the number of LLDP MED Network Policy TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.8
fsLldpMedStatsRxInventoryTLVsDiscarded This object specifies the number of LLDP MED Inventory TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.9
fsLldpMedStatsRxLocationTLVsDiscarded This object specifies the number of LLDP MED Location TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.10
fsLldpMedStatsRxExPowerMDITLVsDiscarded This object specifies the number of LLDP MED Extended Power Via MDI TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.101.3.1.1.11
fsLldpMedStatsRxCapTLVsDiscardedReason This object specifies the reason for last discarded LLDP MED Capability TLV	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.101.3.1.1.12
fsLldpMedStatsRxPolicyDiscardedReason This object specifies the reason for last discarded LLDP MED Network Policy TLV	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.101.3.1.1.13
fsLldpMedStatsRxInventoryDiscardedReason This object specifies the reason for last discarded LLDP MED Inventory TLV	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.101.3.1.1.14
fsLldpMedStatsRxLocationDiscardedReason This object specifies the reason for last discarded LLDP MED Location Identification TLV	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.101.3.1.1.15
fsLldpMedStatsRxExPowerDiscardedReason This object specifies the reason for last discarded LLDP MED Extended Power-via-MDI TLV	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.29601.2.101.3.1.1.16