ARICENT-ELPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
72

fsElpsContextTable

table
.1.3.6.1.4.1.29601.2.25.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsContextTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsContextTable' 
This object specifies the List of ELPS Module parameters per Virtual Context.
fsElpsContextEntry row .1.3.6.1.4.1.29601.2.25.2.1.1
This object specifies the Per virtual context ELPS module parameters. An entry in this table gets
created as and when a virtual context is created.
Indexes
Column Syntax OID
fsElpsContextId
This object is used to distinguish between the
multiple virtual bridge contexts within a bridge.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.2.1.1.1
fsElpsContextSystemControl
This object specifies the administrative system control status requested by management
for ELPS.
The value start(1) indicates that ELPS should be active in the
virtual context and on all ports in that virtual context…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.29601.2.25.2.1.1.2
fsElpsContextModuleStatus
The administrative module status requested by management
for ELPS.
The value enable(1) indicates that ELPS should be enabled in the
virtual context and on all ports in that virtual context.
The value disable(2) indi…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.25.2.1.1.3
fsElpsContextTraceInputString
This object is used to store the trace option string input given by the user.
Based on the input to this object, trace statements corresponding
to the given options are displayed for this virtual context.
To enable part…
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.29601.2.25.2.1.1.4
fsElpsContextEnableTrap
The column is used to enable or disable the transmission of
TRAP notification messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.25.2.1.1.5
fsElpsContextVlanGroupManager
This object specifies the module that manages the grouping of
vlans in this virtual context.

mstp(1) - MSTP(Multiple Spanning Tree Protocol) module manages
the grouping of vlans. In this case, M…
Enumerationr/w
Enumerated Values:
1mstp
2elps
 .1.3.6.1.4.1.29601.2.25.2.1.1.6

fsElpsPgConfigTable

table
.1.3.6.1.4.1.29601.2.25.3.1 · 1 row entry · 20 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgConfigTable' 
This table is used to create and configure the
protection groups in any virtual context. Each entry in this table 
corresponds to a protection group on a virtual context.
          
The protection switching for MPLS LSP/PW is supported only in the
default context and not in any other contexts.
fsElpsPgConfigEntry row .1.3.6.1.4.1.29601.2.25.3.1.1
This object specifies the protection group table entry. Each entry in this table contains the
required attribute values which define the protection group entry.
Indexes
Column Syntax OID
fsElpsPgConfigPgId
This object specifies the unique identifier for the protection group.
PgId
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.29601.2.25.3.1.1.1
fsElpsPgConfigType
This object specifies if the protection group needs to provide
protection for an individual service or a list of services.

If the value is 'individual(1)', the protection is available only for
the sing…
PgTyper/w
Type Values:
1individual
2list
3all
 .1.3.6.1.4.1.29601.2.25.3.1.1.2
fsElpsPgConfigServiceType
This object specifies the type of transport service for which this
protection group will provide protection.
The following service types are supported
- vlan(1)
- mplsLSP(2)
- mplsPW(3)
PgServiceTyper/w
Type Values:
1vlan
2mplsLSP
3mplsPW
 .1.3.6.1.4.1.29601.2.25.3.1.1.3
fsElpsPgConfigMonitorMechanism
This object specifies the type of monitoring mechanism used for
detecting faults for this protection group entry.
If the value of this object is not 'none' for any fsElpsPgConfigEntry, then
the fsElpsPgCfmTable table…
PgMonitorMechanismTyper/w
Type Values:
1cfm
2mplsOam
3none
 .1.3.6.1.4.1.29601.2.25.3.1.1.4
fsElpsPgConfigIngressPort
This object specifies the port through which the traffic ingresses for
the working and protection transport services into the protection
domain. This port defines the boundary of the protection domain on both
the en…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.29601.2.25.3.1.1.5
fsElpsPgConfigWorkingPort
This object specifies the working port which carries the normal traffic
in the absence of any failure.
For 'vlan' service type, this object is mandatory and should be configured with a
non-zero value.
For other servic…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.29601.2.25.3.1.1.6
fsElpsPgConfigProtectionPort
This object specifies the protection port which carries the normal
traffic upon failure of the working transport entity.
For 'vlan' service type, this object is mandatory and should be configured with a
non-zero value…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.29601.2.25.3.1.1.7
fsElpsPgConfigWorkingServiceValue
This object specifies the service identifier of the working service
which carries the normal traffic in the absence of any failure.

This object is applicable only for 'vlan' type of services.
…
PgServiceValueOrNoner/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.1.1.8
fsElpsPgConfigProtectionServiceValue
This object specifies the service identifier of the protection service
which carries the normal traffic upon failure of the working entity.

This object is applicable only for 'vlan' type of services.
…
PgServiceValueOrNoner/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.1.1.9
fsElpsPgConfigOperType
This object is used to indicate the operation type/mode of the
protection group entry. If the value is set to 'revertive(1)', then
normal traffic will be shifted from the protection entity back to the
working entity …
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
 .1.3.6.1.4.1.29601.2.25.3.1.1.10
fsElpsPgConfigProtType
This object is used to indicate the protection architecture type of the
protection group entry. Protection architecture types supported are
given below:
- 'oneIsToOneBidirectionalWithAps(1)', then the selector bridge …
Enumerationr/w
Enumerated Values:
1oneIsToOneBidirectionalWithAps
2onePlusOneBidirectionalWithAps
3onePlusOneUnidirectionalWithAps
4onePlusOneUnidirectionalWithOutAps
 .1.3.6.1.4.1.29601.2.25.3.1.1.11
fsElpsPgConfigName
This object is used to refer the protection group in addition to the
protection group Id. The default value for this object will be the
null string. This object can be configured even when the row status
of this tabl…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.29601.2.25.3.1.1.12
fsElpsPgConfigRowStatus
This object specifies the status of this row/entry.
Setting this object to Active is not allowed in the following
scenarios:
- If the value of the column fsElpsPgConfigMonitorMechanism is set
to 'cfm/mplsOam' a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.25.3.1.1.13
fsElpsPgConfigWorkingServicePointer
This object is applicable for 'mplsLSP' and 'mplsPw' service types.

When fsElpsPgConfigServiceType is 'mplsLSP' :
- This object should be configured with the object identifier
of the row in the MPLS …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.1.1.14
fsElpsPgConfigWorkingReverseServicePointer
This object is applicable for 'mplsLSP' service type only.

When fsElpsPgConfigServiceType is 'mplsLSP' :
- Configuring this object is optional.
- This object should be configured with the object identif…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.1.1.15
fsElpsPgConfigProtectionServicePointer
This object is applicable for 'mplsLSP' and 'mplsPw' service types.

When fsElpsPgConfigServiceType is 'mplsLSP' :
- This object should be configured with the object identifier
of the row in the MPLS …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.1.1.16
fsElpsPgConfigProtectionReverseServicePointer
This object is applicable for 'mplsLSP' service type only.

When fsElpsPgConfigServiceType is 'mplsLSP' :
- Configuring this object is optional.
- This object should be configured with the object identif…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.1.1.17
fsElpsPgConfigWorkingInstanceId
This object specifies the working instance which contains the VLAN to be protected
in this protection group.

If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id should be
from one of the MST…
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.29601.2.25.3.1.1.18
fsElpsPgConfigProtectionInstanceId
This object specifies the protection instance which contains the protection VLANs
in this protection group.

If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id should be
from one of the MSTI…
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.29601.2.25.3.1.1.19
fsElpsPgPscVersion
This object specifies the PSC header version number to be used for
transmitting the Protection State Coordination (PSC) control
packet through the generic associated channel (G-ACh) for LSP/pseudowire.

Al…
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.29601.2.25.3.1.1.20

fsElpsPgCmdTable

table
.1.3.6.1.4.1.29601.2.25.3.2 · 1 row entry · 12 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgCmdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgCmdTable' 
This object specifies the protection group command table. Each entry in this table 
corresponds to a configured protection group on a virtual context in this
bridge. Entry in this table is implicitly created when an entry for 
protection group is created in the fsElpsPgConfigTable table. 
This table contains commands and parameters that are configured for a 
protection group entry which is active and status objects providing the
local and far end requests and states.
fsElpsPgCmdEntry row .1.3.6.1.4.1.29601.2.25.3.2.1
This object specifies the protection group command table entry. Each entry in this table
contains objects that operate on the state event machine for the
protection group and can be configured when the protection grou…
Indexes
Column Syntax OID
fsElpsPgCmdHoTime
This object is used to configure the hold-off timer. The purpose is
to allow a server layer protection mechanism to have a chance to fix
the problem before switching at the client layer, or to allow an
upstream prot…
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.29601.2.25.3.2.1.1
fsElpsPgCmdWTR
This object is used to configure the wait-to-restore timer for the
protection group. The timer has a period from 1 to 1000 minutes,
configurable in steps of 1 minute.

This object is applicable only i…
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.25.3.2.1.2
fsElpsPgCmdExtCmd
This object is used by the operator to request that the protection group
state machine perform some administrative operation. The operator
requests a command by writing the command value to this column. The
command ma…
PgExtCmdr/w
Type Values:
1lockOutProtection
2forceSwitchToProtection
3manualSwitchToProtection
4exercise
5clear
6freeze
7clearFreeze
8manualSwitchToWorking
 .1.3.6.1.4.1.29601.2.25.3.2.1.3
fsElpsPgCmdExtCmdStatus
This object specifies the status of the most recent administrative
command issued to this protection group through the fsElpsPgCmdExtCmd
object.
Enumeration
Enumerated Values:
1accepted
2overruled
3notApplicable
4rejected
 .1.3.6.1.4.1.29601.2.25.3.2.1.4
fsElpsPgCmdLocalCondition
This object specifies the most recent local condition that had occurred
for this protection group.
PgLocalCondition
Type Values:
1signalFailOnWorking
2recoverSignalFailOnWorking
3signalFailOnProtection
4recoverSignalFailOnProtection
5waitToRestoreExpiry
 .1.3.6.1.4.1.29601.2.25.3.2.1.5
fsElpsPgCmdLocalConditionStatus
This object specifies the status of the most recent local condition
as indicated by the fsElpsPgCmdLocalCondition that occured for this
protection group.
Enumeration
Enumerated Values:
1accepted
2overruled
3notApplicable
4rejected
 .1.3.6.1.4.1.29601.2.25.3.2.1.6
fsElpsPgCmdFarEndRequest
This object specifies the most recent far-end request received for this
protection group through the reception of APS PDU.
PgFarEndRequest
Type Values:
1lockOutProtection
2signalFailOnProtection
3forceSwitchToProtection
4signalFailOnWorking
5manualSwitchToProtection
6waitToRestore
7exerciseOnWorking
8exerciseOnProtection
9reverseRequestOnWorking
10reverseRequestOnProtection
11noRequestOnWorking
12noRequestOnProtection
13doNotRevert
14manualSwitchToWorking
 .1.3.6.1.4.1.29601.2.25.3.2.1.7
fsElpsPgCmdFarEndRequestStatus
This object specifies the status of the most recent far-end request
as indicated by the fsElpsPgCmdFarEndRequest object received for this
protection group.
Enumeration
Enumerated Values:
1accepted
2overruled
3notApplicable
4rejected
 .1.3.6.1.4.1.29601.2.25.3.2.1.8
fsElpsPgCmdActiveRequest
This object specifies the last local request (command or condition) or
far end request (received for this protection group through the
reception of APS PDU) that was accepted and applied to this
protection group. The…
PgActiveRequest
Type Values:
0localLockOutProtection
1localForcedSwitchToProtection
2localSignalFailOnWorking
3localRecoverSignalFailOnWorking
4localSignalFailOnProtection
5localRecoverSignalFailOnProtection
6localManualSwitchToProtection
7localManualSwitchToWorking
8localClear
9localExercise
10localWaitToRestoreExpiry
11farLockOutProtection
12farSignalFailOnProtection
13farForceSwitchToProtection
14farSignalFailOnWorking
15farManualSwitchToProtection
16farManualSwitchToWorking
17farWaitToRestore
18farExerciseOnWorking
19farExerciseOnProtection
20farReverseRequestOnWorking
21farReverseRequestOnProtection
22farNoRequestOnWorking
23farNoRequestOnProtection
24farDoNotRevert
 .1.3.6.1.4.1.29601.2.25.3.2.1.9
fsElpsPgCmdSemState
This object specifies the current state of the State Event Machine
for this protection group.
PgSemState
Type Values:
0noRequestOnWorking
1noRequestOnProtection
2lockOutProtection
3forceSwitchToProtection
4signalFailOnWorking
5signalFailOnProtection
6manualSwitchToProtection
7manualSwitchToWorking
8waitToRestore
9doNotRevert
10exerciseOnWorking
11exerciseOnProtection
12reverseRequestOnWorking
13reverseRequestOnProtection
 .1.3.6.1.4.1.29601.2.25.3.2.1.10
fsElpsPgCmdPgStatus
The object is to indicate the status of the protection group.
PgStatus
Type Values:
0protectionDisabled
1workingPathActive
2protectionPathActive
3waitToRestoreState
4holdOffState
5switchingFailed
6unavailable
7doNotRevert
 .1.3.6.1.4.1.29601.2.25.3.2.1.11
fsElpsPgCmdApsPeriodicTime
This column is used to configure the time interval for the periodic
transmission of
- Protection Switching PDUs, namely, APS PDU for 'vlan' service
- Protection State Coordination Protocol messages, namely, PSC pack…
secondsUnsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.29601.2.25.3.2.1.12

fsElpsPgCfmTable

table
.1.3.6.1.4.1.29601.2.25.3.3 · 1 row entry · 13 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgCfmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgCfmTable' 
This table contains the configurations related to the monitoring entities
for each protection group as denoted by the fsElpsPgConfigPgId object. 
Currently, fault monitoring using the Y.1731 mechanism and BFD are supported. 
The creation of an entry in this table does not create the 
Y.1731 / MPLS-OAM Monitoring entities. These Monitoring entities have to be created 
explicitly in ECFM or in MPLS-OAM accordingly.
fsElpsPgCfmEntry row .1.3.6.1.4.1.29601.2.25.3.3.1
This object specifies the entry that indicate the monitoring entities for each protection group.
Indexes
Column Syntax OID
fsElpsPgCfmWorkingMEG
This object specifies the Maintenance Entity Group (MEG) that the working
entity of the protection group denoted by fsElpsPgConfigPgId
corresponds to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.1
fsElpsPgCfmWorkingME
This object specifies the Maintenance Entity (ME) that the working entity of
the protection group denoted by fsElpsPgConfigPgId corresponds to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.2
fsElpsPgCfmWorkingMEP
This object specifies the Maintenance Entity Group (MEG) End Point (MEP)
that monitors the working entity of the protection group denoted by the
fsElpsPgConfigPgId value.
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.29601.2.25.3.3.1.3
fsElpsPgCfmProtectionMEG
This object specifies the Maintenance Entity Group (MEG) that the protection
entity of the protection group denoted by fsElpsPgConfigPgId
corresponds to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.4
fsElpsPgCfmProtectionME
This object specifies the Maintenance Entity (ME) that the protection entity of
the protection group denoted by fsElpsPgConfigPgId corresponds to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.5
fsElpsPgCfmProtectionMEP
This object specifies the Maintenance Entity Group (MEG) End Point (MEP) that
monitors the protection entity of the protection group denoted by the
fsElpsPgConfigPgId value.
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.29601.2.25.3.3.1.6
fsElpsPgCfmRowStatus
The status of this row.
The writable columns in any row of this table cannot be changed while
the row is active. Furthermore, creation of any entry or modification to
any entry in this table is allowed only when the co…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.25.3.3.1.7
fsElpsPgCfmWorkingReverseMEG
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'.
In case of associated mplsLSP, this object refers to
the Maintenance Entity Group (MEG) for the reverse working entity.
In case of co-rou…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.8
fsElpsPgCfmWorkingReverseME
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'.
In case of associated mplsLSP, this object refers to
the Maintenance Entity (ME) for the reverse working entity.
In case of co-routed mpl…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.9
fsElpsPgCfmWorkingReverseMEP
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'.
In case of associated mplsLSP, this object refers to
the Maintenance Entity Group(MEG) End Point (MEP) that monitors the
reverse working…
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.29601.2.25.3.3.1.10
fsElpsPgCfmProtectionReverseMEG
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'. In case of associated mplsLSP, this object refers to
the Maintenance Entity Group (MEG) for the reverse protection entity
of the protecti…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.11
fsElpsPgCfmProtectionReverseME
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'. In case of associated mplsLSP, this object refers to
the Maintenance Entity (ME) for the reverse protection entity of the
protection group…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.3.1.12
fsElpsPgCfmProtectionReverseMEP
This object is applicable only when the fsElpsPgConfigServiceType is
'mplsLSP'. In case of associated mplsLSP, this object refers to the
Maintenance Entity Group (MEG) End Point (MEP) that monitors the reverse
protect…
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.29601.2.25.3.3.1.13

fsElpsPgServiceListTable

table
.1.3.6.1.4.1.29601.2.25.3.4 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgServiceListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgServiceListTable' 
This table contains the list of services   
that needs to be protected for the corresponding protection group entry. 
This table needs to be populated only for those protection groups which 
have the value of the object fsElpsPgConfigType as 'list'. Protecting 
a list of services is only possible when the same set of services (and
therefore service identifiers) are used for both the working and 
protection entities.
          
This table is applicable for service type 'vlan' only.
fsElpsPgServiceListEntry row .1.3.6.1.4.1.29601.2.25.3.4.1
This object specifies the protection group service list table entry. Creation of this entry is
allowed only if the value of the object fsElpsPgConfigType is configured
as 'list'.
Indexes
Column Syntax OID
fsElpsPgServiceListValue
This object specifies the services which needs to be protected
for this protection group and which will have its traffic shifted from
the port indicated by fsElpsPgConfigWorkingPort object to the port
indicated by the …
PgServiceValue
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.29601.2.25.3.4.1.1
fsElpsPgServiceListRowStatus
This object specifies the status of this row. The valid options supported for this table are
'createAndGo' and 'destroy'. Entries in this table cannot be created or
modified when the corresponding entry in the protecti…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.25.3.4.1.2

fsElpsPgShareTable

table
.1.3.6.1.4.1.29601.2.25.3.5 · 1 row entry · 2 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgShareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgShareTable' 
This table contains the set of protection groups
that shares the same protection entity (i.e. protection port).
fsElpsPgShareEntry row .1.3.6.1.4.1.29601.2.25.3.5.1
The protection group share table entry. Each entry indicates a protection
group that shares the protection port.
Indexes
Column Syntax OID
fsElpsPgShareProtectionPort
This object specifies the protection entity (port) which
carries the normal traffic upon failure of the working transport
entity.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.25.3.5.1.1
fsElpsPgSharePgStatus
The object is used to indicate the status of the protection group that shares
the protection port as indicated by the fsElpsPgConfigProtectionPort
object.
PgStatus
Type Values:
0protectionDisabled
1workingPathActive
2protectionPathActive
3waitToRestoreState
4holdOffState
5switchingFailed
6unavailable
7doNotRevert
 .1.3.6.1.4.1.29601.2.25.3.5.1.2

fsElpsPgStatsTable

table
.1.3.6.1.4.1.29601.2.25.3.6 · 1 row entry · 11 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgStatsTable' 
This table contains statistics information for each of the protection
groups present in the system. Entries in this table are created 
implicitly by the creation of entries in the fsElpsPgConfigTable.
fsElpsPgStatsEntry row .1.3.6.1.4.1.29601.2.25.3.6.1
This object specifies the protection group statistics table entry. There is one entry in this
table for each entry in the fsElpsPgConfigTable table.
Indexes
Column Syntax OID
fsElpsPgStatsAutoProtectionSwitchCount
This object is used to record the number of times automatic protection switching
has happened for this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.1
fsElpsPgStatsForcedSwitchCount
This object is used to record the number of times a forced protection switch has
happened for this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.2
fsElpsPgStatsManualSwitchCount
This object is used to record the number of times a manual protection switch has
happened for this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.3
fsElpsPgStatsClearStatistics
This object is used to reset all the statistics counter objects present
in this table.
This will be done by setting the value of this column to 'true(1)'.
This column will always return 'false(2)' when read.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.25.3.6.1.4
fsElpsPgStatsApsPktTxCount
This object is used to record the total number of APS/PSC packets attempted to
be transmitted out of this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.5
fsElpsPgStatsApsPktRxCount
This object is used to record the total number of APS/PSC packets received by
this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.6
fsElpsPgStatsApsPktDiscardCount
This object is used to record the total number of APS/PSC packets discarded in
this protection group entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.7
fsElpsPgLRSFRxTime
This object specifies the timestamp when receiving Local Request -
signal fail message. This is detected in local node and it is not got
from the packet. The time is in milliseconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.8
fsElpsPgLRSFTxTime
This object specifies the timestamp when sending Local Request - signal
fail packet to the peer node. The time is in milliseconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.9
fsElpsPgFRSFRxTime
This object specifies the timestamp when receiving Far end Request -
signal fail packet from the peer node. The time is in milliseconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.10
fsElpsPgStateChgTime
This object specifies the timestamp when the protection path becomes
active after processing the signal fail packet that is received from
the peer. The time is in milliseconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.6.1.11

fsElpsPgServiceListPointerTable

table
.1.3.6.1.4.1.29601.2.25.3.7 · 1 row entry · 6 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsElpsPgServiceListPointerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ELPS-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ELPS-MIB::fsElpsPgServiceListPointerTable' 
This table contains the 
object identifiers for the list of services that needs to be protected 
and the corresponding the protection services.
          
This table is applicable only when the protection group type is 'list'.
          
This table is useful when each of the working service has a specific protection 
service who's service value is different from the working service value. 
          
This table also helps to generically configure the working and protection services
in terms of specifying their 'object identifiers', instead of directly configuring 
the value of the services.
fsElpsPgServiceListPointerEntry row .1.3.6.1.4.1.29601.2.25.3.7.1
This object specifies the protection group service list pointer table entry.
Creation of this entry is allowed only if the value of the object fsElpsPgConfigType
is configured as 'list'.
Indexes
Column Syntax OID
fsElpsPgServiceListId
This object specifies the Unique numeric identifier for a working and protection service set in a protection list
within the protection group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.25.3.7.1.1
fsElpsPgWorkingServiceListPointer
This object specifies a working service which needs to be protected.

This object is applicable for 'mplsLSP' and 'mplsPw' service type.

When fsElpsPgConfigServiceType is 'mplsLSP' :
- …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.7.1.2
fsElpsPgWorkingReverseServiceListPointer
This object specifies the reverse path of the working service that is protected.
This object is optional and is applicable only when the forward and resverse paths
are different for certain type of services.
…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.7.1.3
fsElpsPgProtectionServiceListPointer
This object specifies to the protection service corresponding to the working service.

This object is applicable for 'mplsLSP' and 'mplsPw' service types.

When fsElpsPgConfigServiceType is…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.7.1.4
fsElpsPgProtectionReverseServiceListPointer
This object specifies the reverse path of the protection service.
Configuring this object is optional and is applicable only when the
forward and resverse paths are different for certain type of services.
…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.29601.2.25.3.7.1.5
fsElpsPgServiceListPointerRowStatus
This object specifies the status of this row. Entries in this table cannot be created or modified
when the corresponding entry in the protection group config table for this
fsElpsPgConfigPgId is active.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.25.3.7.1.6