ALU-SYSTEM-MIB

        This document is the SNMP MIB module to manage and provision extended
system functionality for the Nokia 7705 SAR series devices.
        
Copyright 2003-2015 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
        
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property.  Nokia retains
all title and ownership in the Specification, including any
revisions.
        
Nokia grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Nokia
products, and without fee, provided this copyright notice and
license appear on all copies.
        
This Specification is supplied 'as is', and Nokia
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
    
Source file
ALU-SYSTEM-MIB
Last revised
Identity
aluSystemMIBModule
Base OID
1.3.6.1.4.1.6527.6.1.1.1.3.13
Imported Objects
ALU-CHASSIS-MIB aluHwObjs
ALU-SAR-GLOBAL-MIB aluSARConfs aluSARMIBModules aluSARNotifyPrefix aluSARObjs
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
TIMETRA-TC-MIB TmnxAdminState TmnxOperState TPortSchedulerPIR
Net-SNMP examples using the nokia MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALU-SYSTEM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALU-SYSTEM-MIB::aluSystemMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-SYSTEM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-SYSTEM-MIB::aluSystemMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (44)
.1.3.6.1.4.1.6527.6.1.1.1.3.13
.1.3.6.1.4.1.6527.6.1.2.1.13
.1.3.6.1.4.1.6527.6.1.2.1.13.1
.1.3.6.1.4.1.6527.6.1.2.1.13.2
.1.3.6.1.4.1.6527.6.1.2.2.13
.1.3.6.1.4.1.6527.6.1.2.2.13.1
.1.3.6.1.4.1.6527.6.1.2.2.13.1.1
.1.3.6.1.4.1.6527.6.1.2.2.13.1.2
.1.3.6.1.4.1.6527.6.1.2.2.13.1.3
.1.3.6.1.4.1.6527.6.1.2.2.13.2
.1.3.6.1.4.1.6527.6.1.2.2.13.2.1
.1.3.6.1.4.1.6527.6.1.2.2.13.3
.1.3.6.1.4.1.6527.6.1.2.2.13.3.1
.1.3.6.1.4.1.6527.6.1.2.2.13.3.2
.1.3.6.1.4.1.6527.6.1.2.2.13.3.3
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.1
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.10
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.11
timeRefLeapSec obsolete
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.12
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.13
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.2
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.3
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.4
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.5
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.6
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.7
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.8
.1.3.6.1.4.1.6527.6.1.2.2.13.3.4.1.9
.1.3.6.1.4.1.6527.6.1.2.2.13.4
.1.3.6.1.4.1.6527.6.1.2.2.13.4.1
.1.3.6.1.4.1.6527.6.1.2.2.13.5
.1.3.6.1.4.1.6527.6.1.2.2.13.5.1
.1.3.6.1.4.1.6527.6.1.2.2.13.5.2
.1.3.6.1.4.1.6527.6.1.2.2.13.5.3
.1.3.6.1.4.1.6527.6.1.2.2.13.6
.1.3.6.1.4.1.6527.6.1.2.2.13.6.1
.1.3.6.1.4.1.6527.6.1.2.2.13.6.2
.1.3.6.1.4.1.6527.6.1.2.2.2.8
.1.3.6.1.4.1.6527.6.1.2.2.2.8.1
.1.3.6.1.4.1.6527.6.1.2.2.2.8.2
.1.3.6.1.4.1.6527.6.1.2.3.9
.1.3.6.1.4.1.6527.6.1.2.3.9.0
Dependencies (19) 6 direct · 13 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (5)
Enumeration
none(0)
priority1(1)
priority2(2)
priority3(3)
priority4(4)
priority5(5)
priority6(6)
priority7(7)
priority8(8)
priority9(9)
priority10(10)
priority11(11)
priority12(12)
priority13(13)
priority14(14)
priority15(15)
priority16(16)
priority17(17)
holdover(18)
The AluSysTimePriorityType specifies the relative priority of
system time inputs. The highest priority (lowest numerical value)
qualified input to system time will be the selected system time
source.
Enumeration
notScheduled(0)
forwardScheduled(1)
backwardScheduled(2)
The AluSysTimeRefLeapSecSchedType value indicates whether a leap second
is scheduled. The encoding allows for scheduling a forward or a backwards
leap second.
Unsigned32 range: 0..4294967295
The AluSysTimeReferenceId is an identifier that is unique for its
associated AluSysTimeReferenceType. The following AluSysTimeReferenceId
type are defined:

AluSysTimeReferenceType | AluSysTimeReferenceId
---------------------------------------------------------------------
'gnss (1)' | TmnxPortID
'ptp (2)' | Alu1588PtpClockIndex
'ntp (3)' | 1
'sntp (4)' | 1
'holdover (5)' | 1

When the time reference type is 'ptp (2)', reference ids in the range
1..31 identify PTP clocks that are configured in the table
aluPtpClockTable. A PTP reference id of 32 corresponds to the PTP
clock on the CSM, which is configured with the tmnxPtpClockConfig
objects.
Enumeration
notApplic(0)
gnss(1)
ptp(2)
ntp(3)
sntp(4)
holdover(5)
The AluSysTimeReferenceType value indicates the type of system time
reference.
Enumeration
none(0)
cm(1)
ct(2)
irig-b000-b120(3)
irig-b001-b121(4)
irig-b002-b122(5)
irig-b003-b123(6)
irig-b004-b124(7)
irig-b005-b125(8)
irig-b006-b126(9)
irig-b007-b127(10)
The AluTod1PpsMessageType specifies the format of the message used
on the ToD 1PPS connector.

none (0) - specifies that no messages are sent after the 1 second pulse.
cm (1) - specifies the China Mobile format is generated after the 1
second pulse
ct (2) - specifies the China Telecom format is generated after the 1
second pulse.

The IRIGB message format is fully described in IRIG STANDARD 200-04. The
message formats are described with respect to the tuple (Format,
Modulation Type, Frequency, Coded Expression). The following message
formats are defined:

irig-b000-b120 (3) -
b000 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, CF, SBS
b120 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, CF, SBS
irig-b001-b121 (4) -
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, CF
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, CF
irig-b002-b122 (5),
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY
irig-b003-b123 (6),
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, SBS
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, SBS
irig-b004-b124 (7),
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, BCDYEAR, CF, SBS
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, BCDYEAR, CF, SBS
irig-b005-b125 (8),
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, BCDYEAR, CF
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, BCDYEAR, CF
irig-b006-b126 (9),
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, BCDYEAR
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, BCDYEAR
irig-b007-b127 (10)
b001 - Format: B,
Modulation: Pulse width code,
Frequency: No carrier/index count interval
Coded Expression: BCDTOY, BCDYEAR, SBS
b121 - Format: B,
Modulation: Sine wave, amplitude modulated,
Frequency: 1000 Hz/1 ms
Coded Expression: BCDTOY, BCDYEAR, SBS.
Conformance Groups (10)
The group of objects supporting management of the
Time Of Day - 1 PPS port on the Nokia
7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.1
The group of objects supporting management of the
NTP on the Nokia 7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.2
The group of objects supporting management of the System Time
Selection on the Nokia 7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.3
The group of objects added in 6.1 release to support alu system
notifications.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.4
The group of notifications supporting management of the
System Time Reference Selection Nokia 7705.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.5
The group of objects supporting management of the System Time
Source Selection in release 6.1 on the Nokia 7705 SAR series
systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.6
The group of obsolete objects supporting management of the System Time
Source Selection on the Nokia 7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.7
The group of objects supporting self proccessed traffic management of the
Nokia 7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.8
The group of objects supporting data path crypto module versioning.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.9
The group of objects supporting management of system forwarding
path options of the Nokia 7705 SAR series systems.
.1.3.6.1.4.1.6527.6.1.2.1.13.2.10
Compliance Statements (6)

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.1
The compliance statement for revision 1.0 of ALU-SYSTEM-MIB.
Required groups

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.2
The compliance statement for revision 1.0 of ALU-SYSTEM-MIB.
Required groups

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.3
The compliance statement for revision 7.0 of ALU-SYSTEM-MIB.
Required groups

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.4
The compliance statement for revision 20.4 of ALU-SYSTEM-MIB.
Required groups

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.5
The compliance statement for revision 21.4 of ALU-SYSTEM-MIB.
Required groups

OID .1.3.6.1.4.1.6527.6.1.2.1.13.1.6
The compliance statement for revision 21.4 of ALU-SYSTEM-MIB.
Required groups