ALU-PTPV2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
17
Rows
17
Columns
195
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2 · 1 row entry · 16 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockTable'
This table provides the IEEE1588 PTP Clock.
aluPtpClockEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1
Configuration information concerning IEEE 1588 PTP Clock
Column Syntax OID
The unique value which identifies this IEEE 1588 PTP clock.
Alu1588PtpClockIndex
Type Constraints:
range: 1..32
Description:
The clock index of the IEEE 1588 PTP clock. A Alu1588PtpClockIndex
value specifies the index for the an entry in the aluPtpClockTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.1
Row Status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.2
The value of aluPtpClockIpInterface indicates the ip
interface of the IEEE 1588 PTP ordinary/boundary clock. This
interface is used to determine the source IPv4 and/or IPv6
address of the PTP packets.

Th…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.3
The unique value which identifies the MDA slot within
the system which is perfoming IEEE 1588 PTP event message
time or frequency recovery processing.

This object is derived when the aluPtpClockIpInterfac…
TIMETRA-CHASSIS-MIBTmnxHwIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
The TmnxHwIndexOrZero is a unique integer index that identifies an
Nokia SROS series manufactured hardware component, such as an IOM,
CPM, Fabric or MDA card. Also TmnxHwIndexOrZero can be zero.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.4
The value of aluPtpClockProfile specifies the conformance of the PTP
system to either the default IEEE 1588-2008 behavior, or one of the
ITU-T profiles.

When aluPtpClockProfile is modified, several other …
Alu1588PtpProfiler/w
Type Values:
0unknown
1ituTelecomFreq
2ieee1588-2008
3g8275dot1-2014
4g8275dot2-2016
Description:
The Precision Time Protocol (PTP) profile specifies the standard to
which PTP conforms.
ituTelecomFreq - aligns with some of the core principles specified
in the ITU-T G.8265.1 specification
…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.5
The value of aluPtpClockAdminState specifies whether PTP 1588 is
enabled on the system.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
Description:
The TmnxAdminState data type is an enumerated integer that describes
the values used to identify the administratively desired state of
functional modules.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.6
The value of aluPtpClockDynamicPeers specifies whether PTP 1588 allows
peers to be dynamically learned.

aluPtpClockDynamicPeers can not be modified if aluPtpClockType is
set to 'endToEndTransparent (3)'.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.7
The value of aluPtpClockForwardWeight represents the percentage that the
forward direction data path is used in the calculations related to
updates to the clock recovery DCO. A value of '-1' indicates the
aluPtpClock…
Integer32
Constraints:
range: -1-100
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.8
The value of aluPtpClockRecoveryState indicates the
current clock synchronization state of the clock derived from
the IEEE 1588 PTP event messages.

This object is unknown when the aluPtpClockType is set t…
Alu1588PtpClockRecoveryState
Type Values:
0unknown
1freeRun
2acquiring
3phase-tracking
4holdover
5locked
Description:
The state of the clock that is recovered from the IEEE 1588
PTP clock recovery instance.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.9
The value of aluPtpClockTimeRefPriority indicates the relative
priority order of the clock to be used as a source of system time.
The aluPtpClockTimeRefPriority cannot be set to a non-zero value
unless that clock is cap…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.10
The value of aluPtpClockAdminFreqSource is the preferred source of
frequency timing for PTP ports that are in the master state.

The default value of aluPtpClockAdminFreqSource is based on the
the aluPt…
Alu1588PtpFreqSourcer/w
Type Values:
0unknown
1ptp
2ssu
Description:
The preferred source of input frequency timing of the 1588 clock
recovery engine.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.11
The value of aluPtpClockOperFreqSource is the current source of
frequency timing for PTP master ports and for PTP time recovery.

This object is 'unknown(0)' when the aluPtpClockType is set to
'endToEndTra…
Alu1588PtpFreqSource
Type Values:
0unknown
1ptp
2ssu
Description:
The preferred source of input frequency timing of the 1588 clock
recovery engine.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.12
The value of aluPtpClockUseNodeTime specifies whether the PTP clock
will utilize the node system time as its time source. This time
is used by ptp-ports in the master state.

If aluPtpClockProfile is 'g827…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.13
The value of aluPtpClockSyncCertaintyState indicates the
synchronization certainty state of the clock. When the clock is
acting as a Grandmaster (ie. a master only ordinary clock or a
boundary clock with a PRTC timing s…
Alu1588PtpSyncCertaintyState
Type Values:
0unknown
1certain
2uncertain
Description:
The Alu1588PtpSyncCertaintyState indicates state of synchronization
certainty. A value of 'certain(1)' indicates that synchronization
is within the specified uncertainty limits. A value of 'uncertain(2)'
indicates that …
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.14
The aluPtpClockTxWhileUncertain specifies whether the PTP clock will
transmit Announce packets while the aluPtpClockSyncCertaintyState is
'uncertain(2)'. A value of 'false(2)' indicates that Announce packets
will only b…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.15
The $[OBJECT] specifies if the clock uses
Asymmetry-Compensation in the time-recovery offset calculations. This
object only applies to G8275.2 (IP) clocks. When configured it will
act like G8275.2 w/ APTS (Assisted Pa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.16
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockDefaultDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockDefaultDSTable'
This table provides IEEE1588 PTP Clock Default Data Set.
aluPtpClockDefaultDSEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1
Configuration information concerning IEEE 1588PTP
Indexes
No indexes recorded
Column Syntax OID
This 64-bit extended unique identifier (EUI-64) is a
concatenation of the 24-bit OUI, the MAC address of the chassis
and the aluPtpClockIndex.
Alu1588PtpClockId
Type Constraints:
range: 8
Description:
This 64-bit extended unique identifier (EUI-64) is
a concatenation of the 24-bit OUI and the MAC address
of the chassis plus the clock index - 1.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.1
The IEEE P1588 PTP clock type.

Modifying this object to 'ordinary (2)' will change the
aluPtpClockNumberPorts object to '1'.

Modifying this object to 'boundary (1)' will change the
aluPtpC…
Alu1588PtpClockTyper/w
Type Values:
0unknown
1boundary
2ordinary
3endToEndTransparent
4peerToPeerTransparent
5managementNode
Description:
Alu1588PtpClockType specifies the type of clock of the network element
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.2
This is an indicator of whether IEEE 1588 PTP ordinary clock is
slave-only.

This object is only applicable to if the aluPtpClockType is
'ordinary (2)'.

This object can not be modified if …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.3
The value of aluPtpClockDomain specifies the domain in which PTP 1588
clock runs on the system.

The default value of aluPtpClockDomain depends on the value of
aluPtpClockProfile.

If aluPtpC…
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.4
The number of IEEE PTP ports. This object is set based on the
the following rules:

aluPtpClockType 'ordinary (2)' - aluPtpClockNumberPorts '1'
aluPtpClockType 'boundary (1)' - aluPtpClockNumberPorts '50'
…
Unsigned32
Constraints:
range: 0-50
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.5
The clock class of the IEEE 1588 PTP ordinary or boundary clock.
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.6
The accuracy of a IEEE 1588 PTP ordinary or boundary clock
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.7
aluPtpClockVariance is a measure of the precision of an ordinary
or boundary clock. The value 65535 indicates that the variance
is either too large to be represented or has not been computed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.8
The value of aluPtpClockPriority1 specifies the value of the
defaultDS.priority1 data set member defined in IEEE Std 1588-2008.

If aluPtpClockProfile is 'g8275dot1-2014 (3)' or, 'g8275dot2-2016 (3)'
aluPt…
AluPtpPriorityr/w
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.9
The priority2 value of the IEEE 1588 PTP clock.


The default value of aluPtpClockPriority2 depends on the value of
aluPtpClockProfile, aluPtpClockType and aluPtpClockSlaveOnly. If the
aluPtp…
AluPtpPriorityr/w
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.10
This is an indicator of whether master-slave synchronization
utilizes follow-up messaging.

This object is only applicable to ordinary and boundary clocks.
Alu1588PtpClockStepType
Type Values:
0unknown
1oneStep
2twoStep
Description:
Alu1588PtpClockStepType specifies the clock step:
unknown (0) - It is unknown whether the clock is a one-step or
two-step clock. No announce messages have been
received from the remote clock…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.11
The value of aluPtpClockLocalPriority specifies the local priority
used in the best master clock algorithm for the PTP clock when
aluPtpClockProfile is 'g8275dot1-2014 (3)' or 'g8275dot2-2016 (4)'.

This v…
AluPtpPriorityr/w
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.3.1.12
.1.3.6.1.4.1.6527.6.1.2.2.12.1.4 · 1 row entry · 1 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockCurrentDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockCurrentDSTable'
This table provides IEEE 1588 PTP Clock Default Data Set.
aluPtpClockCurrentDSEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.4.1
Operational information concerning IEEE 1588 PTP Clock current
values
Indexes
No indexes recorded
Column Syntax OID
The number of IEEE 1588 PTP devices between the IEEE 1588 PTP clock
and the master
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.4.1.2
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5 · 1 row entry · 16 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockParentDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockParentDSTable'
This table provides IEEE1588 PTP Clock Default Data Set.
aluPtpClockParentDSEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1
Operational information concerning IEEE 1588PTP Clock current
values
Indexes
No indexes recorded
Column Syntax OID
The value of aluPtpClockParentId indicates the clock identity of
the Master Clock. The value of this object corresponds
to the parentDS.parentPortIdentity.clockIdentity data set
member defined in IEEE Std 1588-2008.
Alu1588PtpClockId
Type Constraints:
range: 8
Description:
This 64-bit extended unique identifier (EUI-64) is
a concatenation of the 24-bit OUI and the MAC address
of the chassis plus the clock index - 1.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.1
The value of aluPtpClockParentPortNum indicates the identifying
port number used by the remote peer when communicating with the local
clock. The value of this object corresponds to the
parentDS.parentPortIdentity.portN…
AluPtpPortNumber
Type Constraints:
range: 0..65534
Description:
AluPtpPortNumber specifies a number which identifies a logical access
point of a clock for PTP communications to the communications network.

A PTP ordinary clock has exactly one PTP port, with port number 1.
…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.2
This is an indicator of whether parent master stats are collected.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.3
The frequency offset scaled log variance of the current master
(IEEE P1588 D2.2 sect 7.6.3).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.4
The current grand master's clock identifier.
Alu1588PtpClockId
Type Constraints:
range: 8
Description:
This 64-bit extended unique identifier (EUI-64) is
a concatenation of the 24-bit OUI and the MAC address
of the chassis plus the clock index - 1.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.6
The clock class of the grandmaster clock.
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.7
The accuracy of the grandmaster clock
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.8
The offset scaled log variance value of the current
grandmaster clock.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.9
The priority1 value of the current grandmaster clock.
AluPtpPriority
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.10
The priority2 value of the current grandmaster clock.
AluPtpPriority
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.11
The aluPtpLocalPtpPortIndex value indicates an index for an entry in
the aluPtpPortTable that is associated with the current master
clock.
Alu1588ActivePtpPortIndex
Type Constraints:
range: 0..50
Description:
The Alu1588ActivePtpPortIndex value specifies the index for an
entry in the aluPtpPortTable that is associated with the current
1588 master. A '0' value indicates that the Alu1588ActivePtpPortIndex
is undefined. This o…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.12
The aluPtpLocalPtpPeerIndex value indicates an index for an entry in
the aluPtpUcMasterTable that is associated with the current master
clock.
Alu1588ActivePtpMasterIndex
Type Constraints:
range: 0..50
Description:
The Alu1588ActivePtpMasterIndex value specifies the index for an
entry in the aluPtpUcMasterTable that is associated with the current
1588 master. A '0' value indicates that the Alu1588ActivePtpMasterIndex
is undefined…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.13
If aluPtpParentSyncCertaintyState is supported by the PTP
profile it is set based on the following rules:

1) a clock acting as a Grandmaster Clock (eg. T-GM) the
aluPtpParentSyncCertaintyState will be …
Alu1588PtpSyncCertaintyState
Type Values:
0unknown
1certain
2uncertain
Description:
The Alu1588PtpSyncCertaintyState indicates state of synchronization
certainty. A value of 'certain(1)' indicates that synchronization
is within the specified uncertainty limits. A value of 'uncertain(2)'
indicates that …
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.14
If aluPtpClockAsymmetryCompensation is supported by the PTP Clock
the ParentDS will contain the aluPtpClockAptsAsymmetryOffset value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.15
If aluPtpClockAsymmetryCompensation is supported by the PTP Clock
the ParentDS will contain the aluPtpClockAptsCalc time that the
asymmetry value was stored.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.16
contains the steps removed from the GM (Grand Master).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.5.1.17
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6 · 1 row entry · 8 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockTimePropertyDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockTimePropertyDSTable'
This table provides IEEE1588 PTP Clock Time Property Data Set.
aluPtpClockTimePropertyDSEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1
Operational information concerning IEEE 1588 PTP Clock time
property values
Indexes
No indexes recorded
Column Syntax OID
The value of aluPtpClockCurUtcOffset indicates the offset
between TAI and UTC in seconds.
Integer32
Constraints:
range: -65536-65535
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.1
The value of aluPtpClockCurUtcOffsetValid is
'true (1)' if the aluPtpClockCurUtcOffset is
known to be correct.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.2
The value of aluPtpClockLeap59 is an indicator of whether
the current UTC minute has 59 seconds.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.3
The value of aluPtpClockLeap61 is an indicator of whether
the current UTC minute has 61 seconds.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.4
The value of aluPtpClockTimeTraceable is an indicator of whether
time is traceable to a primary reference.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.6
The value of aluPtpClockFreqTraceable is an indicator of whether
frequency is traceable to a primary reference.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.7
The value of aluPtpClockPtpTimescale is an indicator of whether
timescale is PTP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.8
The timesource of the clock.
AluPtpTimeSource
Type Values:
16atomic-clock
32gps
48terrestrial-radio
64ptp
80ntp
96hand-set
144other
160internal-osc
255reserved
Description:
AluPtpTimeSource specifies the time source:
'ATOMIC_CLOCK (16)' Any device, or device directly connected to such a
device, that is based on atomic resonance for
frequency and that h…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.6.1.9
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7 · 1 row entry · 6 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpClockPacketStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpClockPacketStatsTable'
The aluPtpClockPacketStatsTable is the extension table that consists of
the packet statistics associated with the Precision Time Protocol (PTP)
for the Nokia 7705 device.
aluPtpClockPacketStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1
The cluPtpClockPacketStatsEntry contains the directional packet
statistics for the Precision Time Protocol (PTP) for the Nokia 7705 device.
Indexes
No indexes recorded
Column Syntax OID
The value of aluPtpClkPktStatsPDelayRequest indicates the accumulated
packet statistics for PTP PDelay Request messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.1
The value of aluPtpClkPktStatsPDelayResp indicates the accumulated
packet statistics for PTP PDelay Response messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.2
The value of aluPtpClkPktStatsPDelayRespFollowUp indicates the accumulated
packet statistics for PTP PDelay Response FollowUp messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.3
The value of aluPtpClkPktStatsAltTimeOffsetIndTlv indicates the accumulated
packet statistics for this TLV type.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.4
The value of aluPtpClkPktStatsOrgExtTotalTimeInaccTlv indicates the accumulated
packet statistics for this TLV type.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.5
The value of aluPtpClkPktStatsDropTlv indicates the accumulated
packet statistics for TLV drops.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.1.7.1.6
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.4 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpEthClockPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpEthClockPortTable'
An extension table that contains additional Ptp Port information for 7705 routers.
aluPtpEthClockPortEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.8.4.1
Additional information about an Ptp Ports.
Indexes
No indexes recorded
Column Syntax OID
The value of $[OBJECT] is the time inaccuracy we will add to our parent inaccuracy and then
advertise to our peers in announce messages that support the TotalTimeInaccuracy TLV
Unsigned32r/w
Constraints:
range: 0-10000000
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.4.1.1
The aluPtpEthClkAltProfName is a name-string provided when creating a PTP Clock
alternate-profile. For the aluPtpEthClkPortProfileName object use a previously
configured alternate-profile name.
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.4.1.2
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5 · 1 row entry · 7 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpEthClockAltProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpEthClockAltProfTable'
The aluPtpClockAltProfTable consists of PTP configuration information
that is specific to secondary-profile connfigured under this Ptp Clock.
aluPtpEthClockAltProfEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1
A AluPtpClockAltProfEntry contains configuration pertaining to PTP
secondary profile
Column Syntax OID
The value of aluPtpEthClkAltProfRowStatus specifies the row status of the
PTP Secondary-Profile.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.1
The name-string provided when creating a PTP Clock alternate-profile.
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.2
The value of aluPtpEthClkAltProfValue specifies the
configured profile type for our secondary-profile.
AluPtpEthClockProfiler/w
Type Values:
0no-profile
10iec-61850-9-3-2016
11c37dot238-2017
Description:
The Precision Time Protocol (PTP) profile specifies the standard to
which PTP conforms.
ieee1588-2008 - conforms to the default PTP profile specified in
the IEEE 1588-2008 standard
g8275…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.3
The description for our secondary-profile
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.4
The value of aluPtpEthClkAltProfDomain specifies the
configured clock domain value for our secondary-profile.
TIMETRA-PTP-MIBTmnxPtpDomainr/w
Type Constraints:
range: 0..255
Description:
TmnxPtpDomain specifies the Precision Time Protocol (PTP) domain.

The value 0 specifies the default domain for IEEE1588-2008
specification. The value 4 specifies the default domain for ITU-T
G.8265.1 specific…
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.5
The aluPtpEthClkAltProfLogAnnoIntvl represents the mean time interval
between successive Announce messages. The interval is specified as
the logarithm to the base 2 of the time interval in seconds. For
example the value…
Integer32r/w
Constraints:
range: -3-4
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.6
The value of $[OBJECT] is the time inaccuracy we will use for the network
inaccuracy and then add our local inaccuracy to advertise to our peers in
announce messages that support the TotalTimeInaccuracy TLV
Unsigned32r/w
Constraints:
range: 0-10000000
.1.3.6.1.4.1.6527.6.1.2.2.12.1.8.5.1.7
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPortTable'
This table provides editable configuration for the IEEE 1588 PTP
port.
aluPtpPortEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1
Configuration information concerning IEEE 1588 PTP ports.

Rows are created and destroyed based on the aluPtpClockType
object. The number of aluPtpPortEntry is based
the aluPtpClockNumberPorts defined for th…
Column Syntax OID
The index of the clock associated with this ptp port.
Alu1588PtpClockIndex
Type Constraints:
range: 1..32
Description:
The clock index of the IEEE 1588 PTP clock. A Alu1588PtpClockIndex
value specifies the index for the an entry in the aluPtpClockTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1.1
The index of the port associated with this ptp port.
Alu1588PtpPortIndex
Type Constraints:
range: 1..50
Description:
The PTP port index of the IEEE 1588 PTP port. A Alu1588PtpPortIndex
value specifies the index for the an entry in the aluPtpPortTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1.2
The value of aluPtpPortAdminState specifies the administrative state
of the PTP 1588 port.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
Description:
The TmnxAdminState data type is an enumerated integer that describes
the values used to identify the administratively desired state of
functional modules.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1.3
An administrative value indicating of whether the 1588 PTP
port will communicate to negotiate unicast messaging.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1.4
The value of aluPtpPortNumPeers indicates the number of peers
that are associated with this PTP port. The value of this object
is derived based on the values of the aluPtpClockType and
aluPtpClockSlaveOnly objects for …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.1.1.5
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPortDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPortDSTable'
This table allows configuration to the IEEE 1588 PTP
aluPtpPortDSEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1
Configuration information concerning IEEE 1588 PTP
Indexes
No indexes recorded
Column Syntax OID
The IEEE 1588 PTP port number.
AluPtpPortNumber
Type Constraints:
range: 0..65534
Description:
AluPtpPortNumber specifies a number which identifies a logical access
point of a clock for PTP communications to the communications network.

A PTP ordinary clock has exactly one PTP port, with port number 1.
…
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.1
The administrative value for the number of timeouts for
the announce message associated with the 1588 PTP reference/port.
The total time in seconds to timeout is calculated by the
aluPtpPortDSAnnoRxTimeout *
2 ^ aluPt…
Unsigned32r/w
Constraints:
range: 2-10
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.2
The aluPtpPortDSLogAnnoInterval represents the mean time interval
between successive Announce messages. The interval is specified as
the logarithm to the base 2 of the time interval in seconds. For
example the default v…
Integer32r/w
Constraints:
range: -3-4
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.3
The value of aluPtpPortDSLogSyncInterval indicates the period for
the sync messages associated with the 1588 PTP port. The units are seconds
represented as logarithm aluPtpPortDSLogSyncInterval to the base 2. For
examp…
Integer32r/w
Constraints:
range: -7--4
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.4
The state of the IEEE 1588PTP reference/port.
Alu1588PtpPortState
Type Values:
0unknown
1initializing
2faulty
3disabled
4listening
5pre-master
6master
7passive
8uncalibrated
9slave
Description:
The state of the the IEEE 1588 PTP port.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.5
The delay mechanism for the IEEE 1588PTP reference/port.
Enumeration
Enumerated Values:
1e2e
2p2p
254disabled
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.6
The protocol version of the IEEE 1588PTP reference/port.
Enumeration
Enumerated Values:
2v2
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.7
The value of aluPtpPortDSMasterOnly restricts the possible values that
the aluPtpPortDSPortState can have.

If aluPtpPortDSMasterOnly is 'true (1)', the aluPtpPortDSPortState
will never go the 'slave (9)' …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.8
The value of aluPtpPortLocalPriority specifies the local priority used
in the best master clock algorithm for the PTP port when
aluPtpClockProfile is 'g8275dot1-2014 (3)' or 'g8275dot2-2016 (4)'.

This val…
AluPtpPriorityr/w
Type Constraints:
range: 0..255
Description:
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to…
.1.3.6.1.4.1.6527.6.1.2.2.12.2.2.1.9
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3 · 1 row entry · 6 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPortStatsTable'
This extension table contains packet statistics for Ethernet
ports configured for direct transport of PTP over Ethernet
for the Nokia 7705 device.
aluPtpPortStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1
The aluPtpPortStatsEntry contains the directional packet statistics
for a specific Ethernet port configured for direct transport of PTP
over Ethernet for the Nokia 7705 device.
Indexes
No indexes recorded
Column Syntax OID
The value of aluPtpPortStatPDelayRequest specifies the number of
accumulated PTP PDelay Request messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.1
The value of aluPtpPortStatPDelayResponse specifies
accumulated PTP PDelay Response.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.2
The value of aluPtpPortStatPDelayResponseFollowUp specifies
accumulated PTP PDelay Response FollowUp.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.3
The value of aluPtpPortStatAltTimeOffsetTlv specifies
accumulated ATOI TLV.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.4
The value of aluPtpPortStatTotalTimeInaccTlv specifies
accumulated TotalTimeInaccuracy TLV.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.5
The value of aluPtpPortStatDropTlv specifies
accumulated TotalTimeInaccuracy TLV.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.3.1.6
.1.3.6.1.4.1.6527.6.1.2.2.12.2.4 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPacketRateStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPacketRateStatsTable'
This extension table contains packet rate statistics for
PTP the Nokia 7705 device.
aluPtpPacketRateStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.2.4.1
The aluPtpPacketRateStatsEntry contains the current observed rate of PTP
packets transmitted or received over either UDP/IP or directly over
Ethernet for the Nokia 7705 device.
Indexes
No indexes recorded
Column Syntax OID
The value of aluPtpPacketRateStatsPDelayReq indicates the rate of PTP
pdelay request packets transmitted or received by the local PTP clock.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.4.1.1
The value of aluPtpPacketRateStatsPDelayResp indicates the rate of PTP
pdelay response packets transmitted or received by the local PTP clock.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.4.1.2
The value of aluPtpPacketRateStatsPDelayRespFollowUp indicates the rate of PTP
pdelay response follow-up packets transmitted or received by the local PTP clock.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.2.4.1.3
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpUcMasterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpUcMasterTable'
The aluPtpUcMasterTable consists of peer configuration information.
aluPtpUcMasterEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1
The aluPtpUcMasterEntry contains the information pertaining
to the Unicast Master Table as described in the IEEE Std 1588-2008
Section 17.5. Entries within this table represent potential
masters (for boundary clocks and…
Column Syntax OID
The index of the clock associated with this ptp master/peer.
Alu1588PtpClockIndex
Type Constraints:
range: 1..32
Description:
The clock index of the IEEE 1588 PTP clock. A Alu1588PtpClockIndex
value specifies the index for the an entry in the aluPtpClockTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.1
The index of the port associated with this ptp master/peer.
Alu1588PtpPortIndex
Type Constraints:
range: 1..50
Description:
The PTP port index of the IEEE 1588 PTP port. A Alu1588PtpPortIndex
value specifies the index for the an entry in the aluPtpPortTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.2
The index of the master/peer associated with this ptp port.
Alu1588PtpMasterIndex
Type Constraints:
range: 1..50
Description:
The PTP master index of the IEEE 1588 PTP peer. A Alu1588PtpMasterIndex
value specifies the index for the entry in the aluPtpUcMasterTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.3
The value of the object aluPtpPeerIpAddrType indicates the type of
aluPtpPeerIpAddr.

When setting the value of this object, the value of
aluPtpPeerIpAddr must be set as well in the same SNMP SET PDU.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.4
The value of aluPtpPeerIpAddr specifies the remote IP address of
the 1588 PTP peer.

When setting the value of this object, the value of
aluPtpPeerIpAddrType must be set as well in the same SNMP SE…
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 16-16
range: 4-4
range: 0-0
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.5
The value of aluPtpPeerLastChanged indicates the time, since system
startup, that the PTP 1588 peer was created or modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.6
The value of aluPtpPeerDescription specifies a user provided description
string for this SAA test. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.7
The value of aluPtpPeerDiscovered is false unless the aluPtpPeerIpAddr
is learned as a result of getting unicast requests from a remote peer.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.8
The value of aluPtpPeerSyncCertainty indicates the value of the
synchronizationUncertain flag of the Announce message header recieved
or transmitted by the peer. A value of 'certain(1) indicates that
the synchronizati…
Alu1588PtpSyncCertaintyState
Type Values:
0unknown
1certain
2uncertain
Description:
The Alu1588PtpSyncCertaintyState indicates state of synchronization
certainty. A value of 'certain(1)' indicates that synchronization
is within the specified uncertainty limits. A value of 'uncertain(2)'
indicates that …
.1.3.6.1.4.1.6527.6.1.2.2.12.3.1.1.9
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2 · 1 row entry · 62 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPeerPacketStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPeerPacketStatsTable'
This table allows configuration to the IEEE 1588 PTP
aluPtpPeerPacketStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1
Configuration information concerning IEEE 1588 PTP
Indexes
No indexes recorded
Column Syntax OID
The last time the PTP peer packets statistics were updated
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.1
aluPtpPeerBadVersionDisc indicates the number of packets discarded
on ingress as a result of the IEEE P1588 D2.2 section 7.5.5 version number
checking.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.2
aluPtpPeerBadDomainDisc indicates the number of packets discarded
on ingress as a result of the processing as described in IEEE P1588 D2.2
section 9.5.1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.3
aluPtpPeerAlternateMasterDisc indicates the number of packets discarded
on ingress as a result of the processing as described in IEEE P1588 D2.2
section 9.1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.4
aluPtpPeerStepRemovedGreaterThan255Disc indicates the number of
packets discarded on ingress as a result of processing as described
in IEEE P1588 D2.2 section 9.3.2.5.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.5
aluPtpPeerAnnounceMsgTx indicates the number of Announce packets
transmitted to the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.6
Indicates the number of Announce packets received from the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.7
Indicates the number of Sync packets transmitted to the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.8
Indicates the number of Sync packets received from the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.9
Indicates the number of Signaling packets transmitted to the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.10
Indicates the number of Signaling packets received from the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.11
Indicates the number of packets transmitted on UDP port 320.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.12
Indicates the number of packets received on UDP port 320.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.13
Indicates the number of packets transmitted on UDP port 319.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.14
Indicates the number of packets received on UDP port 319.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.15
Indicates the number of unicast announce request packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.16
Indicates the number of unicast announce request packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.17
Indicates the number of unicast announce grant packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.18
Indicates the number of unicast announce grant packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.19
Indicates the number of unicast sync request packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.20
Indicates the number of unicast sync request packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.21
Indicates the number of unicast sync grant packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.22
Indicates the number of unicast sync grant packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.23
Indicates the number of unicast announce cancel request packets
transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.24
Indicates the number of unicast announce cancel request packets
received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.25
Indicates the number of unicast sync cancel packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.26
Indicates the number of unicast sync cancel packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.27
Indicates the number of unicast announce cancel acknowledgement
packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.28
Indicates the number of unicast announce cancel acknowledgement
packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.29
Indicates the number of unicast sync cancel acknowledgement
packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.30
Indicates the number of unicast sync cancel acknowledgement
packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.31
Indicates the number of times the unicast negotiations for
the announce message were rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.32
Indicates the number of times the unicast negotiations for
the sync message were rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.33
aluPtpPeerOutOfOrderSyncPktRx indicates the number of sync
packets discarded on ingress as a sequence number processing
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.34
aluPtpPeerDuplicateMsgDisc indicates the number of packets discarded
on ingress as a result of processing described in IEEE P1588 D2.2
section 7.3.7.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.35
Indicates the number of times the unicast negotiations for
the Announce message failed due to a timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.36
Indicates the number of times the unicast negotiations for
the Sync message failed due to a timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.37
Indicates the number of times the a Grant indication,
for an Announce unicast negotiation, was rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.38
Indicates the number of times the a Grant indication,
for Sync unicast negotiations, was rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.39
Indicates the number of Delay Response packets transmitted to the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.40
Indicates the number of Delay Response packets received from the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.41
Indicates the number of unicast Delay Response request packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.42
Indicates the number of unicast Delay Response request packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.43
Indicates the number of unicast Delay Response grant packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.44
Indicates the number of unicast Delay Response grant packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.45
Indicates the number of unicast Delay Response cancel packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.46
Indicates the number of unicast Delay Response cancel packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.47
Indicates the number of unicast Delay Response cancel acknowledgement
packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.48
Indicates the number of unicast Delay Response cancel acknowledgement
packets received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.49
Indicates the number of times the unicast negotiations for
the Delay Response message failed due to a timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.50
Indicates the number of times the unicast negotiations for
the Delay Response message were rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.51
Indicates the number of times the a Grant indication,
for Delay Response unicast negotiations, was rejected.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.52
Indicates the number of Delay Request packets transmitted to the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.53
Indicates the number of Delay Request packets received from the master.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.54
Indicates the number of times a unicast request for Announce messages
was received but not granted because the requested rate was not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.55
Indicates the number of times a unicast request for Sync messages
was received but not granted because the requested rate was not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.56
Indicates the number of times a unicast request for Delay Response messages
was received but not granted because the requested rate was not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.58
Indicates the number of times the grant for unicast negotiations for
the Announce message expired.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.59
Indicates the number of times the grant for unicast negotiations for
the Sync message expired.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.60
Indicates the number of times the grant for unicast negotiations for
the Delay Response message expired.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.61
aluPtpPeerAnnounceMsgTx indicates the number of Follow-Up packets
transmitted by the peer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.62
Indicates the number of Follow-Up packets received by the peer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.6.1.2.2.12.3.2.1.63
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPeerRecClkStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPeerRecClkStatsTable'
Defines the Nokia 7705 IEEE 1588 PTP clock recovery
statistics table for retrieving statistical information relating
to clock that is derived from the PTP.
aluPtpPeerRecClkStatsEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1
Defines an entry in aluPtpPeerRecClkStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
No indexes recorded
Column Syntax OID
The last time the PTP peer clock recovery statistics were updated
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.1
The number of minutes in aluPtpPeerCurrent24HourFreqOffsetMeanPpb
and aluPtpPeerCurrent24HourFreqOffsetStdDevPpb
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.2
aluPtpPeerCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset
from the local oscillator clock in parts per billion for up to the
last 24 hour.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.3
aluPtpPeerCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the
frequency offset from the local oscillator clock in parts per billion
for up to the last 24 hour.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.4
aluPtpPeerMaxShortIntvlMinutes the maximum number of aluPtpPeerIntvlNumber.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.5
aluPtpPeerTotalShortIntvlMinutes is the number of aluPtpPeerIntvlNumber
that have valid statistics
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.6
This variable indicates if the data for the first
interval is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.7
The mean phase error from the local oscillator clock
in parts per billion during the first interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.8
The standard deviation of the phase error from the local
oscillator clock in nano seconds during the first interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.9
The mean of the phase error from the local
oscillator clock in nano seconds during the first interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.10
The mean frequency offset from the local oscillator clock
in parts per billion during the first interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.11
The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the first interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.3.1.12
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPeerRecClkStatsShortIntvlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPeerRecClkStatsShortIntvlTable'
The PTP Port Recovered Clock Interval Table contains various
statistics collected by 1588 PTP clock recovery instance
over the previous 15 minutes. The past 15 minutes are
broken into 15 1 minute intervals.  Each 
row in this table represents one such interval 
(identified by AluPtpPeerRecClkStatsShortIntvlEntry).
aluPtpPeerRecClkStatsShortIntvlEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1
An entry in the IEEE PTP 1588 peer clock recovery interval
table.
Column Syntax OID
The index of the clock associated with this ptp master/peer.
Alu1588PtpClockIndex
Type Constraints:
range: 1..32
Description:
The clock index of the IEEE 1588 PTP clock. A Alu1588PtpClockIndex
value specifies the index for the an entry in the aluPtpClockTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.1
The index of the port associated with this ptp master/peer.
Alu1588PtpPortIndex
Type Constraints:
range: 1..50
Description:
The PTP port index of the IEEE 1588 PTP port. A Alu1588PtpPortIndex
value specifies the index for the an entry in the aluPtpPortTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.2
The index of the master/peer associated with this ptp port.
Alu1588PtpMasterIndex
Type Constraints:
range: 1..50
Description:
The PTP master index of the IEEE 1588 PTP peer. A Alu1588PtpMasterIndex
value specifies the index for the entry in the aluPtpUcMasterTable.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.3
A number between 1 and 15, where 1 is the most
recently completed 1 minute interval and 15 is
the 1 minutes interval completed 14 minutes prior
to interval 1.
Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.4
This variable indicates if the data for this
interval is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.5
The update time of the ACR interval statistics
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.6
The mean phase error from the local oscillator clock
in parts per billion during the interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.7
The standard deviation of the phase error from the local
oscillator clock in nano seconds during the interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.8
The mean of the phase error from the local
oscillator clock in nano seconds during the interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.6.1.2.2.12.3.4.1.9
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk aluPtpPeerClkRecAlgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALU-PTPV2-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALU-PTPV2-MIB::aluPtpPeerClkRecAlgTable'
Defines the Nokia 7705 IEEE 1588 PTP recovery statistics
table for retrieving statistical information relating to the frequency
and time recovery algorithm that is derived from PTP.
aluPtpPeerClkRecAlgEntry row .1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1
Defines an entry in aluPtpPeerClkRecAlgTable. Entries are
created and deleted by the system depending on the PTP clock
configuration.
Indexes
No indexes recorded
Column Syntax OID
The number of seconds the frequency recovery algorithm was in Free Run
state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.1
The number of seconds the frequency recovery algorithm was in Aquiring
state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.2
The number of seconds the frequency recovery algorithm was in
Phase Tracking state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.3
The number of seconds the frequency recovery algorithm was in
Holdover state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.4
The number of seconds the frequency recovery algorithm was in
Locked state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.5
The number of Excessive Frequency Error events that have been detected
by the frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.6
The number of Packet Loss events that have been detected by the
frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.7
The number of Packet Loss Reset events that have been detected
by the frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.8
The number of Trip events that have been detected by the frequency
recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.9
The number of Variance Too High events that have been detected by the
frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.10
The number of PDV Step events that have been detected by the
frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.11
The number of Gap Rest events that have been detected by the
frequency recovery algorithm.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.6.1.2.2.12.3.5.1.12