TIMETRA-PTP-MIB

        This document is the SNMP MIB module to manage and provision the
Precision Time Protocol (PTP) components of the Nokia SROS device as
defined in the IEEE Standard for a Precision Clock Synchronization
Protocol for Networked Measurement and Control Systems (IEEE Std
1588-2008).
        
Copyright (c) 2011-2018 Nokia.  All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
        
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property.  Nokia retains
all title and ownership in the Specification, including any
revisions.
        
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
        
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification.
    
Source file
TIMETRA-PTP-MIB
Last revised
Identity
timetraPtpMIBModule
Base OID
1.3.6.1.4.1.6527.1.1.3.74
Net-SNMP examples using the nokia MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-PTP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-PTP-MIB::timetraPtpMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-PTP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-PTP-MIB::timetraPtpMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (501)
.1.3.6.1.4.1.6527.1.1.3.74
.1.3.6.1.4.1.6527.3.1.1.74
.1.3.6.1.4.1.6527.3.1.1.74.1
.1.3.6.1.4.1.6527.3.1.1.74.2
.1.3.6.1.4.1.6527.3.1.1.74.2.1
.1.3.6.1.4.1.6527.3.1.1.74.2.10
.1.3.6.1.4.1.6527.3.1.1.74.2.2
.1.3.6.1.4.1.6527.3.1.1.74.2.3
.1.3.6.1.4.1.6527.3.1.1.74.2.4
.1.3.6.1.4.1.6527.3.1.1.74.2.5
.1.3.6.1.4.1.6527.3.1.1.74.2.6
.1.3.6.1.4.1.6527.3.1.1.74.2.7
.1.3.6.1.4.1.6527.3.1.1.74.2.8
.1.3.6.1.4.1.6527.3.1.1.74.2.9
.1.3.6.1.4.1.6527.3.1.2.74
.1.3.6.1.4.1.6527.3.1.2.74.1
.1.3.6.1.4.1.6527.3.1.2.74.1.1
.1.3.6.1.4.1.6527.3.1.2.74.1.2
.1.3.6.1.4.1.6527.3.1.2.74.1.3
.1.3.6.1.4.1.6527.3.1.2.74.1.4
.1.3.6.1.4.1.6527.3.1.2.74.1.5
.1.3.6.1.4.1.6527.3.1.2.74.1.6
.1.3.6.1.4.1.6527.3.1.2.74.10
.1.3.6.1.4.1.6527.3.1.2.74.10.1
.1.3.6.1.4.1.6527.3.1.2.74.10.10
.1.3.6.1.4.1.6527.3.1.2.74.10.11
.1.3.6.1.4.1.6527.3.1.2.74.10.2
.1.3.6.1.4.1.6527.3.1.2.74.10.3
.1.3.6.1.4.1.6527.3.1.2.74.10.4
.1.3.6.1.4.1.6527.3.1.2.74.10.5
.1.3.6.1.4.1.6527.3.1.2.74.10.6
.1.3.6.1.4.1.6527.3.1.2.74.10.7
.1.3.6.1.4.1.6527.3.1.2.74.10.8
.1.3.6.1.4.1.6527.3.1.2.74.10.9
.1.3.6.1.4.1.6527.3.1.2.74.2
.1.3.6.1.4.1.6527.3.1.2.74.2.1
.1.3.6.1.4.1.6527.3.1.2.74.2.1.1
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.74.2.1.10
.1.3.6.1.4.1.6527.3.1.2.74.2.1.11
.1.3.6.1.4.1.6527.3.1.2.74.2.1.12
.1.3.6.1.4.1.6527.3.1.2.74.2.1.13
nanosecondsUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.2.1.14
nanosecondsUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.2.1.15
.1.3.6.1.4.1.6527.3.1.2.74.2.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.1.4
.1.3.6.1.4.1.6527.3.1.2.74.2.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.1.6
.1.3.6.1.4.1.6527.3.1.2.74.2.1.7
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.2.1.9
.1.3.6.1.4.1.6527.3.1.2.74.2.3
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.10
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.11
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.12
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.13
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.14
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.15
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.16
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.17
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.18
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.19
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.20
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.21
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.22
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.23
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.24
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.4
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.6
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.7
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.8
.1.3.6.1.4.1.6527.3.1.2.74.2.3.1.9
.1.3.6.1.4.1.6527.3.1.2.74.2.4
.1.3.6.1.4.1.6527.3.1.2.74.2.4.1
.1.3.6.1.4.1.6527.3.1.2.74.2.4.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.5
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1.4
Integer32
.1.3.6.1.4.1.6527.3.1.2.74.2.5.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.6
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.10
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.11
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.12
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.4
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.6
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.7
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.8
.1.3.6.1.4.1.6527.3.1.2.74.2.6.1.9
.1.3.6.1.4.1.6527.3.1.2.74.2.7
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.4
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.6
.1.3.6.1.4.1.6527.3.1.2.74.2.7.1.7
.1.3.6.1.4.1.6527.3.1.2.74.2.8
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.1
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.2
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.3
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.4
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.5
.1.3.6.1.4.1.6527.3.1.2.74.2.8.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3
.1.3.6.1.4.1.6527.3.1.2.74.3.1
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.10
parts per trillionSNMPv2-SMIInteger32
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.11
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.12
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.13
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.14
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.3
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.5
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.7
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.8
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.1.1.9
.1.3.6.1.4.1.6527.3.1.2.74.3.10
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.3
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.5
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3.10.1.7
.1.3.6.1.4.1.6527.3.1.2.74.3.2
.1.3.6.1.4.1.6527.3.1.2.74.3.2.1
.1.3.6.1.4.1.6527.3.1.2.74.3.2.10
.1.3.6.1.4.1.6527.3.1.2.74.3.2.11
.1.3.6.1.4.1.6527.3.1.2.74.3.2.12
.1.3.6.1.4.1.6527.3.1.2.74.3.2.13
.1.3.6.1.4.1.6527.3.1.2.74.3.2.14
.1.3.6.1.4.1.6527.3.1.2.74.3.2.15
.1.3.6.1.4.1.6527.3.1.2.74.3.2.2
.1.3.6.1.4.1.6527.3.1.2.74.3.2.3
.1.3.6.1.4.1.6527.3.1.2.74.3.2.4
.1.3.6.1.4.1.6527.3.1.2.74.3.2.5
.1.3.6.1.4.1.6527.3.1.2.74.3.2.6
.1.3.6.1.4.1.6527.3.1.2.74.3.2.7
.1.3.6.1.4.1.6527.3.1.2.74.3.2.8
.1.3.6.1.4.1.6527.3.1.2.74.3.2.9
.1.3.6.1.4.1.6527.3.1.2.74.3.3
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.1
Bits
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.11
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.12
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.13
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.14
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.15
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.16
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.17
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.18
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.3
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.5
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.7
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.8
.1.3.6.1.4.1.6527.3.1.2.74.3.3.1.9
.1.3.6.1.4.1.6527.3.1.2.74.3.4
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.1
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.2
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.3
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.5
.1.3.6.1.4.1.6527.3.1.2.74.3.4.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3.5
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.5.1
.1.3.6.1.4.1.6527.3.1.2.74.3.5.10
.1.3.6.1.4.1.6527.3.1.2.74.3.5.11
.1.3.6.1.4.1.6527.3.1.2.74.3.5.12
.1.3.6.1.4.1.6527.3.1.2.74.3.5.13
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.5.14
.1.3.6.1.4.1.6527.3.1.2.74.3.5.15
.1.3.6.1.4.1.6527.3.1.2.74.3.5.16
.1.3.6.1.4.1.6527.3.1.2.74.3.5.17
.1.3.6.1.4.1.6527.3.1.2.74.3.5.18
.1.3.6.1.4.1.6527.3.1.2.74.3.5.19
.1.3.6.1.4.1.6527.3.1.2.74.3.5.2
.1.3.6.1.4.1.6527.3.1.2.74.3.5.3
.1.3.6.1.4.1.6527.3.1.2.74.3.5.4
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.5.5
.1.3.6.1.4.1.6527.3.1.2.74.3.5.6
.1.3.6.1.4.1.6527.3.1.2.74.3.5.7
.1.3.6.1.4.1.6527.3.1.2.74.3.5.8
.1.3.6.1.4.1.6527.3.1.2.74.3.5.9
.1.3.6.1.4.1.6527.3.1.2.74.3.6
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.10
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.3
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.5
packets per secondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.6
packets per secondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.7
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.8
.1.3.6.1.4.1.6527.3.1.2.74.3.6.1.9
.1.3.6.1.4.1.6527.3.1.2.74.3.7
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.10
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.11
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.12
Enumeration
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.13
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.14
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.15
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.16
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.17
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.18
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.19
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.20
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.3
packets per secondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.4
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.5
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.6
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.7
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.8
.1.3.6.1.4.1.6527.3.1.2.74.3.7.1.9
.1.3.6.1.4.1.6527.3.1.2.74.3.8
.1.3.6.1.4.1.6527.3.1.2.74.3.8.1
.1.3.6.1.4.1.6527.3.1.2.74.3.8.1.1
.1.3.6.1.4.1.6527.3.1.2.74.3.8.1.2
.1.3.6.1.4.1.6527.3.1.2.74.3.9
.1.3.6.1.4.1.6527.3.1.2.74.3.9.1
Bits
.1.3.6.1.4.1.6527.3.1.2.74.3.9.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5
.1.3.6.1.4.1.6527.3.1.2.74.5.1
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.23
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.24
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.25
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.26
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.27
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.28
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.29
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.30
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.31
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.32
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.33
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.34
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.35
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.36
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.37
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.38
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.39
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.1.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.2
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.23
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.24
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.25
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.26
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.27
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.28
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.29
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.30
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.31
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.32
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.2.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.3
.1.3.6.1.4.1.6527.3.1.2.74.5.3.1
.1.3.6.1.4.1.6527.3.1.2.74.5.3.10
.1.3.6.1.4.1.6527.3.1.2.74.5.3.11
.1.3.6.1.4.1.6527.3.1.2.74.5.3.12
.1.3.6.1.4.1.6527.3.1.2.74.5.3.13
.1.3.6.1.4.1.6527.3.1.2.74.5.3.14
.1.3.6.1.4.1.6527.3.1.2.74.5.3.15
.1.3.6.1.4.1.6527.3.1.2.74.5.3.16
.1.3.6.1.4.1.6527.3.1.2.74.5.3.17
.1.3.6.1.4.1.6527.3.1.2.74.5.3.18
.1.3.6.1.4.1.6527.3.1.2.74.5.3.19
.1.3.6.1.4.1.6527.3.1.2.74.5.3.2
.1.3.6.1.4.1.6527.3.1.2.74.5.3.20
.1.3.6.1.4.1.6527.3.1.2.74.5.3.21
.1.3.6.1.4.1.6527.3.1.2.74.5.3.3
.1.3.6.1.4.1.6527.3.1.2.74.5.3.4
.1.3.6.1.4.1.6527.3.1.2.74.5.3.5
.1.3.6.1.4.1.6527.3.1.2.74.5.3.6
.1.3.6.1.4.1.6527.3.1.2.74.5.3.7
.1.3.6.1.4.1.6527.3.1.2.74.5.3.8
.1.3.6.1.4.1.6527.3.1.2.74.5.3.9
.1.3.6.1.4.1.6527.3.1.2.74.5.4
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.4.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.5
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.1
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.10
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.2
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.3
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.4
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.5
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.6
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.7
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.8
packets per decasecondSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.6527.3.1.2.74.5.5.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.6
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.23
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.24
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.25
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.26
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.27
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.28
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.29
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.30
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.31
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.32
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.33
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.34
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.35
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.36
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.37
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.6.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.7
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.23
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.24
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.25
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.26
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.27
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.28
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.29
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.30
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.31
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.32
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.33
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.34
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.35
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.36
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.37
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.7.1.9
.1.3.6.1.4.1.6527.3.1.2.74.5.8
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.1
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.10
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.11
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.12
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.13
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.14
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.15
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.16
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.17
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.18
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.19
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.2
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.20
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.21
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.22
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.23
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.24
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.25
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.26
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.27
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.28
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.29
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.3
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.30
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.31
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.32
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.33
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.34
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.35
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.36
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.37
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.4
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.5
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.6
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.7
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.8
.1.3.6.1.4.1.6527.3.1.2.74.5.8.1.9
.1.3.6.1.4.1.6527.3.1.3.74
.1.3.6.1.4.1.6527.3.1.3.74.0
Dependencies (23) 9 direct · 14 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (18)
Unsigned32 range: 0..255
TmnxPtpClockAccuracy specifies the mean of the time frequency error
between the clock under test and a perfect reference clock, over an
ensemble of measurements.
Unsigned32 range: 0..255
TmnxPtpClockClass specifies the traceability of the time or frequency
distributed by the grandmaster clock.
OctetString range: 8
TmnxPtpClockIdentity specifies the unique identifier used to identify
a network element participating in the Precision Time Protocol (PTP).
Enumeration
unknown(0)
oneStep(1)
twoStep(2)
TmnxPtpClockStepType specifies the clock step:
unknown (0) - It is unknown whether the clock is a one-step or
two-step clock. No announce messages have been
received from the remote clock.
oneStep (1) - The Clock provides time information using a single
event message.
twoStep (2) - The Clock provides time information using the
combination of an event message and a subsequent
general message.
Enumeration
ordinarySlave(1)
ordinaryMaster(2)
boundary(3)
TmnxPtpClockType specifies the type of clock of the network element:
ordinarySlave (1) - The system is always a slave clock in the
master-slave hierarchy. The system derives its
timing from one or more master clocks in the
network.
ordinaryMaster (2) - The system is a grandmaster clock in the
master-slave hierarchy. The system provides
timing to multiple slave clocks in the
network.
boundary (3) - The system is a boundary clock, which may be
anywhere in the master-slave clock hierarchy.
It can obtain timing from a master clock, and
provide timing to multiple slave clocks.
Unsigned32 range: 0..65535
TmnxPtpClockVariance is a measure of the precision of a clock. The
value 65535 indicates that the variance is either too large to be
represented or has not been computed.
OctetString
TmnxPtpDelayAsymmetry indicates the estimated delay asymmetry of the PTP
path between two PTP clocks. The local clock estimates the delay asymmetry
of the path by comparing against another source of time synchronization
that is not significantly affected by asymmetry, such as a local Global
Navigation Satellite System (GNSS) port.
Enumeration
rx(1)
tx(2)
TmnxPtpDirection specifies which direction packets are travelling in
the system:
rx - Packets are being received by the system.
tx - Packets are being transmitted from the system.
Unsigned32 range: 0..255
TmnxPtpDomain specifies the Precision Time Protocol (PTP) domain.

The value 0 specifies the default domain for IEEE1588-2008
specification. The value 4 specifies the default domain for ITU-T
G.8265.1 specification. The value 24 specifies the default domain for
ITU-T G.8275.1 specification. The value 44 specifies the default
domain for ITU-T G.8275.2 specification. The value 0 specifies the
default domain for IEC/IEEE 61850-9-3 specification. The value 254
specifies the default domain for IEEE C37.238-2017 specification.
Integer32 range: -128..127
TmnxPtpLogInterval specifies an interval between PTP packets, or
equivalently, a packet rate. It is specified as the logarithm to the
base 2 of the interval in seconds.

For example, -7 specifies a packet rate of 128 packets per second, and
+4 specifies a packet rate of 1 packet every 16 seconds.
Unsigned32 range: 0..98range: 501..516
Index to each record of performance monitoring. Values supported are:
0 : current 15 minute interval,
1..96 : previous 15 minute intervals (1 being the most recent),
97 : current 24 hour interval,
98 : previous 24 hour interval,
501 : current 1 minute interval,
502..516 : previous 1 minute intervals (502 being the most recent)
Unsigned32 range: 0..65534
TmnxPtpPortNumber specifies a number which identifies a logical access
point of a clock for PTP communications to the communications network.

A PTP ordinary clock has exactly one PTP port, with port number 1. A
PTP boundary clock has multiple ports, each with unique port numbers.
Enumeration
notApplicable(0)
initializing(1)
faulty(2)
disabled(3)
listening(4)
preMaster(5)
master(6)
passive(7)
uncalibrated(8)
slave(9)
TmnxPtpPortState indicates the operational state of a PTP port.
Unsigned32 range: 0..255
The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.

It is used by the Best Master Clock Algorithm to determine which clock
should provide timing for the network.

The priority is rated highest (0) to lowest (255).
Enumeration
g8265dot1-2010(1)
ieee1588-2008(2)
g8275dot1-2014(3)
g8275dot2-2016(4)
iec-61850-9-3-2016(5)
c37dot238-2017(6)
The Precision Time Protocol (PTP) profile specifies the standard to
which PTP conforms.
g8265dot1-2010 - conforms to the PTP profile specified in the
ITU-T G.8265.1 specification
ieee1588-2008 - conforms to the default PTP profile specified in
the IEEE 1588-2008 standard
g8275dot1-2014 - conforms to the PTP profile specified in the
ITU-T G.8275.1 specification
g8275dot2-2016 - conforms to the PTP profile specified in the
ITU-T G.8275.2 specification
iec-61850-9-3-2016 - conforms to the 2016 version of the IEC/IEEE 61850-9-3 specification
c37dot238-2017 - conforms to the 2017 version of the IEEE C37.238 specification
OctetString range: 8
TmnxPtpTimeInterval is an octet string encoding a signed time interval,
in scaled nanoseconds. The signed time interval is encoded as a 64-bit
two's complement integer, in network byte order. The time interval in
nanoseconds may be obtained by dividing the value by 2^16.

This object is used for items of data type 'TimeInterval' in IEEE
1588-2008.
Enumeration
unknown(0)
port(1)
cpm(2)
TmnxPtpTimeStampReferencePoint indicates the reference point where a
PTP event packet is timestamped in the SROS system:
unknown (0) - The reference point for the PTP timestamp has not yet
been determined.
port (1) - The PTP packet's timestamp was taken at the physical
port, between the MAC and the PHY. This corresponds
to reference point 'A' in IEEE 1588-2008, Figure 14.
cpm (2) - The PTP packet's timestamp was taken in software in
the operating system kernel on the CPM card. This
corresponds to reference point 'B' in IEEE 1588-2008,
Figure 14.
Enumeration
none(1)
udpIp(2)
ethernet(3)
TmnxPtpTransportType indicates the transport type of the PTP packets
exchanged between two PTP clocks.

Values:
none (1) - this value is used to indicate that there is no
exchange of PTP packets between the two PTP clocks
udpIp (2) - the PTP clocks are exchanging PTP packets over
UDP/IP
ethernet (3) - the PTP clocks are exchanging PTP packets directly
over Ethernet
Conformance Groups (52)
The group of objects maintaining table/row statistics for Precision
Timing Protocol (PTP) on the SROS series system.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.1
The group of objects maintaining system configuration for the
Precision Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.2
The group of objects indicating system operational states for the
Precision Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.3
The group of objects indicating system operational states for the
Master Clock for the Precision Timing Protocol (PTP) on SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.4
The group of objects maintaining Peer configuration for the Precision
Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.5
The group of objects indicating operational states for Master Peers
for the Precision Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.6
tmnxPtpClkPktStatsAnnounce tmnxPtpClkPktStatsSync tmnxPtpClkPktStatsFollowUp tmnxPtpClkPktStatsDelayRequest tmnxPtpClkPktStatsDelayResp tmnxPtpClkPktStatsSignaling tmnxPtpClkPktStatsOther tmnxPtpClkPktStatsUniReqAnno tmnxPtpClkPktStatsUniReqSync tmnxPtpClkPktStatsUniReqDelayRsp tmnxPtpClkPktStatsUniGrantAnno tmnxPtpClkPktStatsUniGrantSync tmnxPtpClkPktStatsUniGrantDelRsp tmnxPtpClkPktStatsUniDenyAnno tmnxPtpClkPktStatsUniDenySync tmnxPtpClkPktStatsUniDenyDelRsp tmnxPtpClkPktStatsUniCancelAnno tmnxPtpClkPktStatsUniCancelSync tmnxPtpClkPktStatsUniCancelDelay tmnxPtpClkPktStatsUniAckCnclAnno tmnxPtpClkPktStatsUniAckCnclSync tmnxPtpClkPktStatsUniAckCnclDly tmnxPtpClkPktStatsOtherTLVs tmnxPtpClkPktStatsDropBadDomain tmnxPtpClkPktStatsDropAltMaster tmnxPtpClkPktStatsDropOther tmnxPtpClkPktStatsDropOutOfSeq tmnxPtpClkPktStatsDropPeerShut tmnxPtpClkPktStatsDropPtsf tmnxPtpPeerPktStatAnnounce tmnxPtpPeerPktStatSync tmnxPtpPeerPktStatFollowUp tmnxPtpPeerPktStatDelayRequest tmnxPtpPeerPktStatDelayResp tmnxPtpPeerPktStatSignaling tmnxPtpPeerPktStatOther tmnxPtpPeerPktStatUniReqAnno tmnxPtpPeerPktStatUniReqSync tmnxPtpPeerPktStatUniReqDelayRsp tmnxPtpPeerPktStatUniGrantAnno tmnxPtpPeerPktStatUniGrantSync tmnxPtpPeerPktStatUniGrantDelRsp tmnxPtpPeerPktStatUniDenyAnno tmnxPtpPeerPktStatUniDenySync tmnxPtpPeerPktStatUniDenyDelRsp tmnxPtpPeerPktStatUniCancelAnno tmnxPtpPeerPktStatUniCancelSync tmnxPtpPeerPktStatUniCancelDelay tmnxPtpPeerPktStatUniAckCnclAnno tmnxPtpPeerPktStatUniAckCnclSync tmnxPtpPeerPktStatUniAckCnclDly tmnxPtpPeerPktStatOtherTLVs tmnxPtpPeerPktStatDropBadDomain tmnxPtpPeerPktStatDropAltMaster tmnxPtpPeerPktStatDropOther tmnxPtpPeerPktStatDropOutOfSeq tmnxPtpPeerPktStatDropPeerShut
The group of objects indicating packet statistics for the Precision
Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.7
The group of objects indicating the clock recovery state and event
statistics for the Precision Timing Protocol (PTP) on SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.8
The group of objects indicating the Peer Unicast Status information
for the Precision Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.9
The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.10
The group of notifications generated by the Precision Timing Protocol
(PTP) on SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.1.11
The group of objects maintaining table/row statistics for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.2.1
The group of objects maintaining interface configuration for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.2.2
The group of objects maintaining interface operational state for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.2.3
The group of objects maintaining peer operational state for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.2.5
The group of objects indicating packet statistics for the Precision
Timing Protocol (PTP) on version 10.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.2.6
The group of objects maintaining virtual router instance configuration
and status for the Precision Timing Protocol (PTP) on version 11.0 of
SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.3.1
The group of additional objects that maintain system configuration for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.1
The group of additional objects that maintain Peer configuration for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.2
The group of objects indicating system operational states for the
Parent/Master Clock for the Precision Timing Protocol (PTP) on version
12.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.3
The group of objects maintaining Ethernet port configuration and
status for the Precision Timing Protocol (PTP) on version 12.0 of SROS
series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.4
The group of objects maintaining Ethernet port statistics for the
Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.5
The group of objects maintaining overall packet rate statistics for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.6
The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on version 12.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.7
The group of notifications generated by the Precision Timing Protocol
(PTP) on version 12.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.4.8
The group of additional objects that maintain system configuration for
the Precision Timing Protocol (PTP) on version 13.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.5.1
The group of additional objects that maintain system configuration and
state for support of Precision Timing Protocol (PTP) Packet Timing
Signal Fail (PTSF) on version 21.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.6.1
The group of additional objects that maintain time state for support
of Precision Timing Protocol on version 21.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.6.2
The group of additional objects that maintain state for support of the
G.8275.2 profile on version 21.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.6.3
The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on version 21.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.6.4
The group of notifications generated by the Precision Timing Protocol
(PTP) on version 21.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.6.5
The group of additional objects supporting management of the Precision
Timing Protocol (PTP) on version 22.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.7.1
The group of objects that maintain the Precision Timing Protocol (PTP)
time recovery on version 22.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.7.2
The group of notifications generated by the Precision Timing Protocol
(PTP) on version 22.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.7.3
The group of additional objects supporting management of the Precision
Timing Protocol (PTP) with GNSS on version 23.0 of SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.1
The group of additional objects supporting PTP clock performance
monitoring statistics on version 23.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.2
The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on version 23.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.3
The group of additional objects supporting description of the master
clock port on version 23.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.4
The group of objects supporting management of ethernet ports with
Precision Timing Protocol (PTP) for version 23.0 on the Nokia SROS
series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.5
The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) for peer timestamp changes on version 23.0 of
SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.6
The group of objects to clarify when a port/peer is the APTS backup
with Precision Timing Protocol (PTP) for version 23.0 on the Nokia
SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.7
The group of objects used by the Precision Timing Protocol (PTP) for
recovery algorithm errors in version 23.0 on the Nokia SROS series
systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.8.8
The group of objects used by the Precision Timing Protocol (PTP) when
monitoring a peer or neighboring clock when using profile G.8275.1 or
G.8275.2 for version 24.0 on the Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.1
tmnxPtpPeerMonitorReceiver tmnxPtpPeerPerfMonIndex tmnxPtpPeerPerfMonMeasureValid tmnxPtpPeerPerfMonPeriodComplete tmnxPtpPeerPerfMonStartTime tmnxPtpPeerPerfMonDuration tmnxPtpPeerPerfMonAvgMastSlavDly tmnxPtpPeerPerfMonMinMastSlavDly tmnxPtpPeerPerfMonMaxMastSlavDly tmnxPtpPeerPerfMonSDMastSlavDly tmnxPtpPeerPerfMonAvgSlavMastDly tmnxPtpPeerPerfMonMinSlavMastDly tmnxPtpPeerPerfMonMaxSlavMastDly tmnxPtpPeerPerfMonSDSlavMastDly tmnxPtpPeerPerfMonAvgMeanPathDly tmnxPtpPeerPerfMonMinMeanPathDly tmnxPtpPeerPerfMonMaxMeanPathDly tmnxPtpPeerPerfMonSDMeanPathDly tmnxPtpPeerPerfMonAvgOffFrMaster tmnxPtpPeerPerfMonMinOffFrMaster tmnxPtpPeerPerfMonMaxOffFrMaster tmnxPtpPeerPerfMonSDOffFrMaster tmnxPtpPeerMonTimeRecoveryState tmnxPtpPeerMonTimeRecStateLstChg tmnxPtpPeerMonTimeOffsetFrMaster tmnxPtpPeerMonTimeMeanPathDelay tmnxPtpPeerMonTimeLastCalc tmnxPtpPortMonitorReceiver tmnxPtpPortMonitorSender tmnxPtpPortPerfMonIndex tmnxPtpPortPerfMonMeasureValid tmnxPtpPortPerfMonPeriodComplete tmnxPtpPortPerfMonStartTime tmnxPtpPortPerfMonDuration tmnxPtpPortPerfMonAvgMastSlavDly tmnxPtpPortPerfMonMinMastSlavDly tmnxPtpPortPerfMonMaxMastSlavDly tmnxPtpPortPerfMonSDMastSlavDly tmnxPtpPortPerfMonAvgSlavMastDly tmnxPtpPortPerfMonMinSlavMastDly tmnxPtpPortPerfMonMaxSlavMastDly tmnxPtpPortPerfMonSDSlavMastDly tmnxPtpPortPerfMonAvgMeanPathDly tmnxPtpPortPerfMonMinMeanPathDly tmnxPtpPortPerfMonMaxMeanPathDly tmnxPtpPortPerfMonSDMeanPathDly tmnxPtpPortPerfMonAvgOffFrMaster tmnxPtpPortPerfMonMinOffFrMaster tmnxPtpPortPerfMonMaxOffFrMaster tmnxPtpPortPerfMonSDOffFrMaster tmnxPtpNeighborMonTimeRecovState tmnxPtpNeighbMonTimeRecStLastChg tmnxPtpNeighbMonTimeOffFrMaster tmnxPtpNeighbMonTimeMeanPathDlay tmnxPtpNeighborMonTimeLastCalc
The group of objects used by the Precision Timing Protocol (PTP) when
using Monitor Receiver and Monitor Sender for version 24.0 on the
Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.2
The group of objects that maintain state for support of the G.8275.2
profile on version 24.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.3
The group of obsoleted objects that maintain state for support of the
G.8275.2 profile for version 24.0 of SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.4
The group of objects supporting Port Based Timestamping (PBT) port
filter added in release 24.0 of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.5
The group of objects supporting portDS.notMaster added in release 25.0
of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.9.6
tmnxPtpPeerOffsetFrLocalNs tmnxPtpTimeInfoOffFromMasterNs tmnxPtpTimeInfoMeanDelayNs tmnxPtpNeighborOffsetFrLocalNs tmnxPtpNeighbMonTimeOffFrMastNs tmnxPtpNeighbMonTimeMnPathDlyNs tmnxPtpPeerPMonAvgMastSlavDlyNs tmnxPtpPeerPMonMinMastSlavDlyNs tmnxPtpPeerPMonMaxMastSlavDlyNs tmnxPtpPeerPMonSDMastSlavDlyNs tmnxPtpPeerPMonAvgSlavMastDlyNs tmnxPtpPeerPMonMinSlavMastDlyNs tmnxPtpPeerPMonMaxSlavMastDlyNs tmnxPtpPeerPMonSDSlavMastDlyNs tmnxPtpPeerPMonAvgMeanPathDlyNs tmnxPtpPeerPMonMinMeanPathDlyNs tmnxPtpPeerPMonMaxMeanPathDlyNs tmnxPtpPeerPMonSDMeanPathDlyNs tmnxPtpPeerPMonAvgOffFrMasterNs tmnxPtpPeerPMonMinOffFrMasterNs tmnxPtpPeerPMonMaxOffFrMasterNs tmnxPtpPeerPMonSDOffFrMasterNs tmnxPtpPeerMonTimeOffsetFrMastNs tmnxPtpPeerMonTimeMeanPathDlyNs tmnxPtpPMonAvgMastSlavDlyNs tmnxPtpPMonMinMastSlavDlyNs tmnxPtpPMonMaxMastSlavDlyNs tmnxPtpPMonSDevMastSlavDlyNs tmnxPtpPMonAvgSlavMastDlyNs tmnxPtpPMonMinSlavMastDlyNs tmnxPtpPMonMaxSlavMastDlyNs tmnxPtpPMonSDevSlavMastDlyNs tmnxPtpPMonAvgMeanPathDlyNs tmnxPtpPMonMinMeanPathDlyNs tmnxPtpPMonMaxMeanPathDlyNs tmnxPtpPMonSDevMeanPathDlyNs tmnxPtpPMonAvgOffsetFrMasterNs tmnxPtpPMonMinOffsetFrMasterNs tmnxPtpPMonMaxOffsetFrMasterNs tmnxPtpPMonSDevOffsetFrMasterNs tmnxPtpPortPMonAvgMastSlavDlyNs tmnxPtpPortPMonMinMastSlavDlyNs tmnxPtpPortPMonMaxMastSlavDlyNs tmnxPtpPortPMonSDMastSlavDlyNs tmnxPtpPortPMonAvgSlavMastDlyNs tmnxPtpPortPMonMinSlavMastDlyNs tmnxPtpPortPMonMaxSlavMastDlyNs tmnxPtpPortPMonSDSlavMastDlyNs tmnxPtpPortPMonAvgMeanPathDlyNs tmnxPtpPortPMonMinMeanPathDlyNs tmnxPtpPortPMonMaxMeanPathDlyNs tmnxPtpPortPMonSDMeanPathDlyNs tmnxPtpPortPMonAvgOffFrMasterNs tmnxPtpPortPMonMinOffFrMasterNs tmnxPtpPortPMonMaxOffFrMasterNs tmnxPtpPortPMonSDOffFrMasterNs
The group of objects supporting RMON of performance statistics added
in release 25.0 of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.10.1
The group of objects supporting PTP peer delay added in release 25.0
of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.10.2
The group of objects supporting PTP Announce TLV Propagation added in
release 25.0 of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.10.3
The group of objects supporting PTP power profiles added in release
25.0 of Nokia SROS series systems.
.1.3.6.1.4.1.6527.3.1.1.74.2.10.4
Compliance Statements (10)

OID .1.3.6.1.4.1.6527.3.1.1.74.1.1
The compliance statement for the management of the Precision Timing
Protocol for Release 9.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.2
The compliance statement for the management of the Precision Timing
Protocol for Release 10.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.3
The compliance statement for the management of the Precision Timing
Protocol for Release 11.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.4
The compliance statement for the management of the Precision Timing
Protocol for Release 12.0 on SROS series systems. The corresponding
base module compliance statement is tmnxPtpComplianceV11v0.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.5
The compliance statement for the management of the Precision Timing
Protocol for Release 13.0 on SROS series systems. The corresponding
base module compliance statement is tmnxPtpComplianceV12v0.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.6
The compliance statement for the management of the Precision Timing
Protocol for Release 21.0 on SROS series systems. The corresponding
base module compliance statement is tmnxPtpComplianceV13v0.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.7
The compliance statement for the management of the Precision Timing
Protocol (PTP) for Release 22.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.8
The compliance statement for the management of the Precision Timing
Protocol (PTP) for Release 23.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.9
The compliance statement for the management of the Precision Timing
Protocol (PTP) for Release 24.0 on SROS series systems.
Required groups

OID .1.3.6.1.4.1.6527.3.1.1.74.1.10
The compliance statement for the management of the Precision Timing
Protocol (PTP) for Release 25.0 on SROS series systems.
Required groups
Notifications / Traps (16)
NameOIDDescription
.1.3.6.1.4.1.6527.3.1.3.74.0.1
The tmnxPtpCardNotSupported notification is generated when the
Precision Timing Protocol (PTP) is enabled on a card that is not
capable of clock recovery using PTP.

This notification is triggered when the
TIMETRA-CHASSIS-MIB::tmnxCpmCardOscillatorType is not 'ocxo (3)', the
tmnxPtpClockClockType is set to 'ordinarySlave (1)' or 'boundary (3)',
and tmnxPtpClockAdminState is set to 'inService (2)'.

[EFFECT] While this event is active, tmnxPtpClockOperState will be
'outOfService (3)' on the card that this notification was generated.

[RECOVERY] This event is cleared when a replacement CPM card with an
Oscillator of type 'ocxo (3)' is inserted.

tmnxPtpCardNotSupportedClear is generated when this event is cleared.
.1.3.6.1.4.1.6527.3.1.3.74.0.10
[CAUSE] The PTP configuration has changed since system initialization.
On some SROS series systems, changing the tmnxPtpClockClockType or
tmnxPtpClockProfile requires a system reboot to take effect.

[EFFECT] PTP remains operationally out of service, even though it has
been administratively enabled.

[RECOVERY] Reboot the system, or change the clock configuration to the
original configuration.
.1.3.6.1.4.1.6527.3.1.3.74.0.11
[CAUSE] The system generates the tmnxPtpRequiresSystemRebootClear
notification when the user changes the PTP configuration to match the
initial configuration.

[EFFECT] PTP does not require a system reboot to become operationally
in service.

[RECOVERY] There is no recovery required for this notification.
.1.3.6.1.4.1.6527.3.1.3.74.0.12
The tmnxPtpTimeRecoveryStateChange is generated when the Precision
Timing Protocol (PTP) time recovery state changes on the system.
.1.3.6.1.4.1.6527.3.1.3.74.0.13
[CAUSE] The tmnxPtpPeerNoTxTimestamping notification is generated on
initial exchange of PTP event messages with a peer and whenever the
location of the timestamping of the event messages transmitted to the
peer changes, and the location is 'cpm (2)'.

[EFFECT] When the timestamping location is 'cpm (2)', the accuracy of
the PTP event messages is less then if the messages are timestamped at
the port and performance will be negatively impacted.

[RECOVERY] It may be necessary to check the capabilities of the port
being used for the messages and/or to modify routing to direct the
messages to an alternate port. Some reasons for a port to not perform
timestamping include: not configured, port not configured for
ptp-hw-assist, port does not support ptp-hw-assist.
.1.3.6.1.4.1.6527.3.1.3.74.0.14
[CAUSE] The tmnxPtpPeerNoTxTimestampingClear notification is generated
when the conditions that caused the tmnxPtpPeerNoTxTimestamping event
have been resolved and result in the location of the timestamping of
the event messages transmitted to the peer being changed from 'cpm
(2)' to 'port (1)'.

[EFFECT] When the timestamping location is the 'port (2)', the
accuracy of the PTP event messages is optimal.

[RECOVERY] No recovery is required for this notification.
.1.3.6.1.4.1.6527.3.1.3.74.0.15
[CAUSE] The tmnxPtpPeerNoRxTimestamping notification is generated on
initial exchange of PTP event messages with a peer and whenever the
location of the timestamping of the event messages received from the
peer changes, and the location is 'cpm (2)'.

[EFFECT] When the timestamping location is 'cpm (2)', the accuracy of
the PTP event messages is less then if the messages are timestamped at
the port and performance will be negatively impacted.

[RECOVERY] It may be necessary to check the capabilities of the port
being used for the messages and/or to modify routing to direct the
messages to an alternate port. Some reasons for a port to not perform
timestamping include: not configured, port not configured for
ptp-hw-assist, port does not support ptp-hw-assist.
.1.3.6.1.4.1.6527.3.1.3.74.0.16
[CAUSE] The tmnxPtpPeerNoRxTimestampingClear notification is generated
when the conditions that caused the tmnxPtpPeerNoRxTimestamping event
have been resolved and result in the location of the timestamping of
the event messages received from the peer being changed from 'cpm (2)'
to 'port (1)'.

[EFFECT] When the timestamping location is the 'port (2)', the
accuracy of the PTP event messages is optimal.

[RECOVERY] No recovery is required for this notification.
.1.3.6.1.4.1.6527.3.1.3.74.0.2
The tmnxPtpCardNotSupportedClear notification is generated when the
tmnxPtpCardNotSupported event is cleared for a particular CPM card.
.1.3.6.1.4.1.6527.3.1.3.74.0.3
The tmnxPtpMasterClockChangedEvent is generated when the Master/Parent
Clock for the Precision Timing Protocol (PTP) changes on the system.
.1.3.6.1.4.1.6527.3.1.3.74.0.4
The tmnxPtpClockRecoveryStateChange is generated when the Precision
Timing Protocol (PTP) clock recovery state changes on the system.
.1.3.6.1.4.1.6527.3.1.3.74.0.5
The tmnxPtpOutOfResources notification is generated when the Precision
Timing Protocol (PTP) process on the card is out of resources.

This may occur in either two situations:
1. The number of PTP peers exceeds the system limit.
2. The total unicast packet rate negotiated with all PTP peers
has reached the maximum packet rate supported by the system.
Exceeding this rate would impact the ability of the master clock
to provide an accurate stream of timing packets to each remote
slave clock.

If either of the two situations above occur, the PTP process will
reject any new unicast packet requests from remote slave PTP peers.

tmnxPtpOutOfResourcesClear is generated when this event is cleared.
.1.3.6.1.4.1.6527.3.1.3.74.0.6
The tmnxPtpOutOfResourcesClear notification is generated when both the
total number of active PTP peers and the total negotiated unicast
packet rate goes below 90% of the system limit.
.1.3.6.1.4.1.6527.3.1.3.74.0.7
The tmnxPtpDynamicChange notification is generated when an object
dynamically (i.e. not by configuration) changes state. This
notification identifies the affected row.
.1.3.6.1.4.1.6527.3.1.3.74.0.8
[CAUSE] The tmnxPtpPortNoTimestamping notification is generated when a
PTP port is created and the associated Ethernet port does not support
IEEE 1588-2008 port-based timestamping.

[EFFECT] The PTP port is created but the performance may be degraded
due to timestamping at the CPM. For optimal performance, ensure PTP is
enabled on ports with IEEE 1588-2008 port-based timestamping
capability.

[RECOVERY] The Ethernet port used for the PTP port should be changed
to a port on an MDA that supports IEEE 1588-2008 port-based
timestamping.
.1.3.6.1.4.1.6527.3.1.3.74.0.9
[CAUSE] The PTP process detected excessive noise between the local
port and the indicated external Master port.

[EFFECT] Any Announce messages received from the indicated neighbor
shall be excluded from the BMCA algorithm until this condition is
cleared.

[RECOVERY] The cause of the excessive noise should be identified and
corrected. Once resolved, the clear command for this neighbor port must
be executed to clear the condition and allow Announces from this neighbor
to be considered in the BMCA.