ALCATEL-IND1-STACK-MANAGER-MIB Table View

Maintains a list with information about all the switches 
that participate on the stack herein refered to as chassis.

alaStackMgrChassisEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1

Each entry corresponds to a chassis and lists its role and
neighbors in the stack.

Indexes

alaStackMgrSlotNINumber

Column	Syntax	OID
alaStackMgrSlotNINumber Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable - 1001..1008: swicthes operating in pass …	AlaStackMgrNINumber Type Constraints: range: 0..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.1
alaStackMgrSlotCMMNumber The numbers allocated for the stack CMMs are from 65..72 or 0 if not present	Integer32 Constraints: range: 0-72	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.2
alaStackMgrChasRole The current role of the chassis as follows: - unassigned(0), - primary(1), - secondary(2), - idle(3), - standalone(4), - passthrough(5).	AlaStackMgrSlotRole Type Values: 0 unassigned 1 primary 2 secondary 3 idle 4 standalone 5 passthrough	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.3
alaStackMgrLocalLinkStateA 1 indicates that the stacking link A is up, which means it knows its adjacent node. 2 indicates that the stacking link A is inactive and RemoteNISlotA and RemoteLinkA are not significants.	AlaStackMgrLinkStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.4
alaStackMgrRemoteNISlotA This is the remote NI slot seen by the current NI through its stacking link A. The numbers allocated for the Stack NIs are 1..8, 1001..1008 or 0 if not present	AlaStackMgrNINumber Type Constraints: range: 0..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.5
alaStackMgrRemoteLinkA This is the remote link of the remote NI slot seen through the stacking link A. The values for these ports are platform dependent. The possible values are: - 0: not present - linkA: 25, 27, 29, 31 or 51 - linkB: 26,…	AlaStackMgrLinkNumber Type Values: 1 linkA 2 linkB 11 linkA11 12 linkB12 25 linkA25 26 linkB26 27 linkA27 28 linkB28 29 linkA29 30 linkB30 31 linkA31 32 linkB32 51 linkA51 52 linkB52	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.6
alaStackMgrLocalLinkStateB 1 indicates that the stacking link B is up, which means it knows its adjacent node. 2 indicates that the stacking link B is inactive and RemoteNISlotB and RemoteLinkB are not significants.	AlaStackMgrLinkStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.7
alaStackMgrRemoteNISlotB This is the remote NI slot seen by the current NI through its stacking link B. The numbers allocated for the Stack NIs are 1..8, 1001..1008 or 0 if not present	AlaStackMgrNINumber Type Constraints: range: 0..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.8
alaStackMgrRemoteLinkB This is the remote link of the remote NI slot seen through the stacking link B. The values for these ports are platform dependent. The possible values are: - 0: not present - linkA: 25, 27, 29, 31 or 51 - linkB: 26, 28,…	AlaStackMgrLinkNumber Type Values: 1 linkA 2 linkB 11 linkA11 12 linkB12 25 linkA25 26 linkB26 27 linkA27 28 linkB28 29 linkA29 30 linkB30 31 linkA31 32 linkB32 51 linkA51 52 linkB52	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.9
alaStackMgrChasState This current state of the chassis: running (1), duplicateSlot (2), clearedSlot (3), outOfSlots (4), outOfTokens (5), badMix (6) or inc-Lic(7).	AlaStackMgrSlotState Type Values: 1 running 2 duplicateSlot 3 clearedSlot 4 outOfSlots 5 outOfTokens 6 badMix 7 inc-Lic	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.10
alaStackMgrSavedSlotNINumber Slot number stored in persistent memory that will be in effect if the stack element reboots. Only slot numbers in the range 1..8 are allowed.	AlaStackMgrNINumberr/w Type Constraints: range: 0..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.11
alaStackMgrCommandAction This object identifies which of the following Actions is to be performed: clearSlot(1), clearSlotImmediately (2) or reload (3). Whenever a new command is received, the value of the object alaStackMgrCommandStatus will …	AlaStackMgrCommandActionr/w Type Values: 0 notSignificant 1 clearSlot 2 clearSlotImmediately 3 reloadAny 4 reloadPassThru	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.12
alaStackMgrCommandStatus This object provides the current status of last command received from the management as follows: notSignificant(0), clearSlotInProgress(1), clearSlotFailed(2), clearSlotSuccess(3), setSlotInProgress(4), setSlotFailed(5…	AlaStackMgrCommandStatus Type Values: 0 notSignificant 1 clearSlotInProgress 2 clearSlotFailed 3 clearSlotSuccess 4 setSlotInProgress 5 setSlotFailed 6 setSlotSuccess	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.13
alaStackMgrOperStackingMode This object specifies the current running mode of the switch.	AlaStackMgrStackingMode Type Values: 1 stackable 2 standalone	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.14
alaStackMgrAdminStackingMode This object specifies the stack mode atained on reload.	AlaStackMgrStackingModer/w Type Values: 1 stackable 2 standalone	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.15

Stack port statistics table.

alaStackMgrStatsEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1

Stats table for stackable ports.

Indexes

alaStackMgrSlotNINumber alaStackMgrStatLinkNumber

Column	Syntax	OID
alaStackMgrStatLinkNumber Local link refers to the stacking port on each slot. The values of these ports are: - linkA: 25, 27, 29, 31 or 51 - linkB: 26, 28, 30, 32 or 52.	AlaStackMgrLinkNumber Type Values: 1 linkA 2 linkB 11 linkA11 12 linkB12 25 linkA25 26 linkB26 27 linkA27 28 linkB28 29 linkA29 30 linkB30 31 linkA31 32 linkB32 51 linkA51 52 linkB52	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.1
alaStackMgrStatPktsRx The total number of packets recieved on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.2
alaStackMgrStatPktsTx The total number of packets transmitted on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.3
alaStackMgrStatErrorsRx The total number of packets in error - received on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.4
alaStackMgrStatErrorsTx The total number of packets in error - transmitted on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.5
alaStackMgrStatDelayFromLastMsg The delay since the last message.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.6

Maintains a list with information about all the static 
routes in the stack.

alaStackMgrStaticRouteEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1

Each entry corresponds to a static route and lists its source and
destination in the stack.

Indexes

alaStackMgrStaticRouteSrcStartIf alaStackMgrStaticRouteSrcEndIf alaStackMgrStaticRouteDstStartIf alaStackMgrStaticRouteDstEndIf

Column	Syntax	OID
alaStackMgrStaticRouteSrcStartIf The physical identification number for start source range of the static route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.1
alaStackMgrStaticRouteSrcEndIf The physical identification number for end source range of the static route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.2
alaStackMgrStaticRouteDstStartIf The physical identification number for start destination range of the static route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.3
alaStackMgrStaticRouteDstEndIf The physical identification number for end destination range of the static route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.4
alaStackMgrStaticRoutePort This is the stack link to the destination NI slot . The values for these ports are platform dependent. The possible values are: - 0: not present - linkA: 25, 27, 29, 31 or 51 - linkB: 26, 28, 30, 32 or 52. Incase …	AlaStackMgrLinkNumberr/w Type Values: 1 linkA 2 linkB 11 linkA11 12 linkB12 25 linkA25 26 linkB26 27 linkA27 28 linkB28 29 linkA29 30 linkB30 31 linkA31 32 linkB32 51 linkA51 52 linkB52	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.5
alaStackMgrStaticRoutePortState 1 indicates that the static route stacking link is up . 2 indicates that the stacking link is inactive.	AlaStackMgrLinkStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.6
alaStackMgrStaticRouteStatus Whether this static route is enabled or disabled .	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.7
alaStackMgrStaticRouteRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.8

Maintains a list with information about the switch mode
for OS6850/OS6850E devices.

alaStackMgrStackModeEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1

Each entry corresponds to the switch mode for OS6850/OS6850E devices.

Indexes

alaStackMgrStackModeIndex

Column	Syntax	OID
alaStackMgrStackModeIndex This object specifies the slot number of the NI. Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbers corresponding to values from the e…	AlaStackMgrNINumber Type Constraints: range: 0..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.1
alaStackMgrAdminStackMode This object specifies the mode of the switch on the next reboot.	AlaStackMgrStackModer/w Type Values: 1 os6850 2 os6850e	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.2
alaStackMgrOperStackMode This object specifies the current running mode of the switch.	AlaStackMgrStackMode Type Values: 1 os6850 2 os6850e	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.3
alaStackMgrCmdAction This object specifies reboot of switch.	Enumerationr/w Enumerated Values: 3 reloadAny	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.4

Maintains a list with information about SSP state of all the switches.

alaSSPStateEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1

Each entry corresponds to a chassis and its SSP state.

Indexes

alaSSPTableSlotNINumber

Column	Syntax	OID
alaSSPTableSlotNINumber Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable - 1001..1008: swicthes operating in pass …	AlaSSPTableSlotNINumber Type Constraints: range: 0..8 range: 255 range: 1001..1008	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.1
alaSSPTableSspOpStatus This indicates the Active/Protection state of the current slot.	AlaSSPTableSspOpStatus Type Values: 0 none 1 active 2 protection 3 notinstack	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.2

This table lists the ssp helper enabled aggregate.

alaSspHelperqAggregateEntry row .1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1

An entry in ssp helper aggregate table.

Indexes

alaSspHelperAggregateId

Column	Syntax	OID
alaSspHelperAggregateId The aggreagte id of the aggregate.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.1
alaSspHelperAggregateStatus Helper status of the linkagg configured on DUT.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.2