ALCATEL-IND1-STACK-MANAGER-MIB

        This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
        
For the Birds Of Prey Product Line
Stack Manager
        
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
        
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
        
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
        
       Copyright (C) 1995-2007 Alcatel-Lucent
           ALL RIGHTS RESERVED WORLDWIDE
    
Source file
ALCATEL-IND1-STACK-MANAGER-MIB
Last revised
Identity
alcatelIND1StackMgrMIB
Base OID
1.3.6.1.4.1.6486.800.1.2.1.24.1
Imported Objects
ALCATEL-IND1-BASE softentIND1StackMgr
IF-MIB InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the alcatel MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-IND1-STACK-MANAGER-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-IND1-STACK-MANAGER-MIB::alcatelIND1StackMgrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-STACK-MANAGER-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-STACK-MANAGER-MIB::alcatelIND1StackMgrMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (71)
.1.3.6.1.4.1.6486.800.1.2.1.24.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.10
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.11
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.12
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.13
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.14
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.15
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.5
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.6
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.7
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.8
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.9
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.1
Enumeration
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.5
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.6
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.3
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.4
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.5
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.5
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.6
Enumeration
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.7
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.8
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.3
Enumeration
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.9
Enumeration
.1.3.6.1.4.1.6486.800.1.2.1.24.1.1.9.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8
Enumeration
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.1
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.2
Integer32
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.5
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.3.1
.1.3.6.1.4.1.6486.800.1.2.1.24.1.3.2
.1.3.6.1.4.1.6486.800.1.2.1.24.1.3.3
.1.3.6.1.4.1.6486.800.1.2.1.24.1.3.4
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ALCATEL-IND1-BASEalcatel
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. ALCATEL-IND1-STACK-MANAGER-MIBalcatelselected
Type Definitions (13)
Integer32 range: 0..8range: 255range: 1001..1008
Enumeration
none(0)
active(1)
protection(2)
notinstack(3)
Enumeration
notSignificant(0)
clearSlot(1)
clearSlotImmediately(2)
reloadAny(3)
reloadPassThru(4)
Enumeration
notSignificant(0)
clearSlotInProgress(1)
clearSlotFailed(2)
clearSlotSuccess(3)
setSlotInProgress(4)
setSlotFailed(5)
setSlotSuccess(6)
Enumeration
notSignificant(0)
metro(1)
Enumeration
linkA(1)
linkB(2)
linkA11(11)
linkB12(12)
linkA25(25)
linkB26(26)
linkA27(27)
linkB28(28)
linkA29(29)
linkB30(30)
linkA31(31)
linkB32(32)
linkA51(51)
linkB52(52)
Enumeration
up(1)
down(2)
Integer32 range: 0..1008
Enumeration
unassigned(0)
primary(1)
secondary(2)
idle(3)
standalone(4)
passthrough(5)
Enumeration
running(1)
duplicateSlot(2)
clearedSlot(3)
outOfSlots(4)
outOfTokens(5)
badMix(6)
inc-Lic(7)
Enumeration
os6850(1)
os6850e(2)
Enumeration
loop(1)
noloop(2)
Enumeration
stackable(1)
standalone(2)
Conformance Groups (8)
A collection of objects providing information about
the topology of the stack .
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.1
A collection of notifications for signaling Stack manager events.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.2
A collection of objects providing information about
the switch mode for OS6850/OS6850E devices.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.3
Stack Manager Trap Objects.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.4
Stack Mgr Statistics.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.5
Stack Static Route.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.6
Stack Mgr Global Objects.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.7
A collection of object providing information about stack split protection protocol.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.9
Compliance Statements (1)

OID .1.3.6.1.4.1.6486.800.1.2.1.24.1.2.2.1
The compliance statement for device support of Stack Manager.
Required groups
Notifications / Traps (12)
NameOIDDescription
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.1
The element specified by alaStackMgrSlotNINumber has the same slot number of
another element of the stack and it must relinquish its operational status
because it has a higher election key (up time, slot, mac).
The elements will be put in pass through mode.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.10
The element identified by alaStackMgrSlotNINumber will enter the pass through
mode because element license information is not same as primary element license information.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.11
The element identified by alaStackMgrSlotNINumber will enter into the SSP Protection state.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.12
The element identified by alaStackMgrSlotNINumber will enter into the SSP Active state.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.2
Indicates whether the stack is in loop or not.
In case of no loop, alaStackMgrSlotNINumber and alaStackMgrTrapLinkNumber
indicate where the Stack is broken
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.3
Role Change Trap. Indicates that a new primary or secondary is elected.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.4
The element identified by alaStackMgrSlotNINumber detected the presence of
two elements with the same primary or secondary role as specified by
alaStackMgrChasRole on the stack.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.5
The element identified by alaStackMgrSlotNINumber will enter the pass through
mode because its operational slot was cleared with immediate effect.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.6
One element of the stack will enter the pass through mode because there
are no slot numbers available to be assigned to this element.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.7
The element identified by alaStackMgrSlotNINumber will enter the pass through
mode because there are no tokens available to be assigned to this element.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.8
There are no pass through slots available to be assigned to an element
that is supposed to enter the pass through mode.
.1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.9
The element identified by alaStackMgrSlotNINumber will enter the pass through
mode because it is not compatible with the existing stack.