ALCATEL-IND1-IPRMV6-MIB Table View

IPRM's IPv6 Routing table. This table contains
an entry for each valid IPv6 unicast route that
can be used for packet forwarding determination.  
It is for display purposes only.

alaIprmV6RouteEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1

A routing entry.

Indexes

No indexes recorded

Column	Syntax	OID
alaIprmV6RouteDest The destination IPv6 address of this route.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.1
alaIprmV6RoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.2
alaIprmV6RouteNextHop On remote routes, the address of the next system en route; otherwise, ::0 ('00000000000000000000000000000000'H in ASN.1 string representation).	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.3
alaIprmV6RouteProtocol The protocol that this route was learned from	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.4
alaIprmV6RouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached.	IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.5
alaIprmV6RouteMetric The routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipv6RouteProtocol value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.6
alaIprmV6RouteValid If this value is true(1) IPRM believes the route is being used. If this value is false(2), the route is currently not being used and is considered a backup route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.7

Table allowing the creation and removal of IPv6 Static Routes.

alaIprmV6StaticRouteEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1

An IPv6 static route entered by the user

Indexes

No indexes recorded

Column	Syntax	OID
alaIprmV6StaticRouteDest The destination IPv6 address of this static route. This object may not take a multicast address value.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.1
alaIprmV6StaticRoutePfxLength Indicates the prefix length of the destination address.	Integer32	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.2
alaIprmV6StaticRouteNextHop The IPv6 address of the next hop towards the destination.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.3
alaIprmV6StaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached.	IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.4
alaIprmV6StaticRouteMetric The routing metric for this route. The lower the value, the higher the priority for the static route.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.5
alaIprmV6StaticRouteStatus Used to control the addition and removal of static routes.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.6
alaIprmV6StaticRouteTag Tag of the static route	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.7
alaIprmV6StaticRouteName Name of the static route.	OctetStringr/w	.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.8