ALCATEL-IND1-IPRMV6-MIB
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IPRMv6 global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE
- Source file
ALCATEL-IND1-IPRMV6-MIB- Last revised
- Identity
alcatelIND1IPRMV6MIB- Base OID
1.3.6.1.4.1.6486.800.1.2.1.10.2.2
Imported Objects
| ALCATEL-IND1-BASE | routingIND1Iprm |
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| IPV6-TC | Ipv6Address Ipv6IfIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
Net-SNMP examples using the alcatel MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-IND1-IPRMV6-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-IND1-IPRMV6-MIB::alcatelIND1IPRMV6MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-IPRMV6-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-IPRMV6-MIB::alcatelIND1IPRMV6MIB'
Objects (31)
Showing 31 of 31 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.1 |
||
|
bitsInteger32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.2 |
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.3 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.4 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.5 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.6 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.1.1.7 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.2 |
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.3 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.4 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.5 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.6 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.7 |
||
|
OctetString
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.2.1.8 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.6 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.7 |
|
|
Integer32
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.1.1.8 |
|
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.2 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.2.1 |
||
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.2.2 |
Dependencies (7) 7 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ALCATEL-IND1-BASEalcatel
- SNMPv2-TCrfc
- IANA-RTPROTO-MIBrfc
- IPV6-TCrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- ALCATEL-IND1-IPRMV6-MIBalcatelselected
Conformance Groups (1)
|
alaIprmV6RouteMetric alaIprmV6RouteValid alaIprmV6StaticRouteMetric alaIprmV6StaticRouteStatus alaIprmV6RtPrefLocal alaIprmV6RtPrefStatic alaIprmV6RtPrefOspf alaIprmV6RtPrefRip alaIprmV6RtPrefEbgp alaIprmV6RtPrefIbgp alaIprmV6StaticRouteTag alaIprmV6StaticRouteName
A collection of objects to support management of global
configuration parameters of the IPRM Module supporting IPv6 routes. |
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.6486.800.1.2.1.10.2.2.2.1.1The compliance statement for routers running IPRM
and implementing the ALCATEL-IND1-IPRMV6 MIB.
and implementing the ALCATEL-IND1-IPRMV6 MIB.
Required groups
| mandatory | alaIprmV6ConfigMIBGroup |