ALCATEL-ENT1-VRRP-MIB Table View

VRRP Tracking Policy table, which consists of a sequence
(i.e., one or more conceptual rows) of 'vrrpTrackEntry' items.

alaVrrpTrackEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1

An entry in the vrrpTrackTable containing the operational
characteristics of a VRRP tracking policy.

Rows in the table cannot be modified unless the value
of 'vrrpTrackAdminState' is 'disabled'.

Indexes

alaVrrpTrackId

Column	Syntax	OID
alaVrrpTrackId This object contains the Tracking Policy Identifier (TRACKID).	AlaVrTrackId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a tracking policy.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.1
alaVrrpTrackState The conditional state of the tracking policy entity.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.2
alaVrrpTrackAdminState This object will enable/disable the tracking policy function.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.3
alaVrrpTrackEntityType This object specifies the tracking policy entity type currently in use.	Enumeration Enumerated Values: 2 port 3 ipaddress 4 interface 5 ipv6Interface	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.4
alaVrrpTrackEntityPort This object contains the Tracking Policy Entity. A port ifIndex or 0 if not significant. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpA…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.6
alaVrrpTrackPriority This object specifies the value by which the priority of virtual routers associated with the tracking policy will be decremented when the tracked entity's operational state transitions from up to down, or will be increm…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.8
alaVrrpTrackRowStatus The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.9
alaVrrpTrackEntityInterface This object contains the Tracking Policy Entity. An interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.10
alaVrrpTrackEntityIpv6Interface This object contains the Tracking Policy Entity. An Ipv6 interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually excl…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.11
alaVrrpTrackEntityIpAddrType This object contains the Tracking Policy Entity IP Address type.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.12
alaVrrpTrackEntityIpAddr This object contains the Tracking Policy Entity. An IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.13
alaVrrpTrackBfdStatus Enables BFD for a VRRP track.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.14
alaVrrpTrackDelay This object specifies a delay value, in seconds, applied when an address tracking policy's operational state transitions to up. The effect is to delay incrementing the priority of the virtual routers associated with th…	secondsInteger32r/w Constraints: range: 0-60	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.15

The table of tracking policies associated with this virtual router.

alaVrrpAssoTrackEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1

An entry in the table contains a tracking policy id that is
associated with a virtual router. The number of rows for
a given ifIndex and VrId will equal the number of tracking
policies associated with the virtual router…

Indexes

IF-MIBifIndex VRRP-MIBvrrpOperVrId alaVrrpAssoTrackId

Column	Syntax	OID
alaVrrpAssoTrackId The identifier of the tracking policy the virtual router is responsible for monitoring.	AlaVrTrackId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a tracking policy.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.1
alaVrrpAssoTrackRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.2

The table of tracking policies associated with this virtual router.

alaVrrp3AssoTrackEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1

An entry in the table contains a tracking policy id that is
associated with a virtual router. The number of rows for
a given IP Version, VrId, and ifIndex will equal the number of tracking
policies associated with the v…

Indexes

ALCATEL-ENT1-VRRP3-MIBalaVrrp3OperIpVersion ALCATEL-ENT1-VRRP3-MIBalaVrrp3OperVrId IF-MIBifIndex alaVrrp3AssoTrackId

Column	Syntax	OID
alaVrrp3AssoTrackId The identifier of the tracking policy the virtual router is responsible for monitoring.	AlaVrTrackId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a tracking policy.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.1
alaVrrp3AssoTrackRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.2

The table of tracking policies associated with this virtual router.

alaVrrpv3AssoTrackEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1

An entry in the table contains a tracking policy id that is
associated with a virtual router. The number of rows for
a given IP Version, VrId, and ifIndex will equal the number of tracking
policies associated with the v…

Indexes

VRRPV3-MIBvrrpv3OperationsInetAddrType IF-MIBifIndex VRRPV3-MIBvrrpv3OperationsVrId alaVrrpv3AssoTrackId

Column	Syntax	OID
alaVrrpv3AssoTrackId The identifier of the tracking policy the virtual router is responsible for monitoring.	AlaVrTrackId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a tracking policy.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.1
alaVrrpv3AssoTrackRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.2

Table of virtual router configuration info.

alaVrrpOperEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1

An entry in the table, config information
about a given virtual router.

Indexes

No indexes recorded

Column	Syntax	OID
alaVrrpCurrentPriority This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master route…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.1
alaVrrpTrackCount The number of tracking policies associated with a virtual router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.2
alaVrrpGroupIdent The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.3

Table of virtual router configuration info.

alaVrrp3OperExEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1

An entry in the table, config information
about a given virtual router.

Indexes

No indexes recorded

Column	Syntax	OID
alaVrrp3CurrentPriority This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master route…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.1
alaVrrp3TrackCount The number of tracking policies associated with a virtual router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.2
alaVrrp3GroupIdent The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.3

Table of virtual router configuration info.

alaVrrpv3OperationsExEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1

An entry in the table, config information
about a given virtual router.

Indexes

No indexes recorded

Column	Syntax	OID
alaVrrpv3CurrentPriority This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master route…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.1
alaVrrpv3TrackCount The number of tracking policies associated with a virtual router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.2
alaVrrpv3GroupIdent The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.3
alaVrrpv3OperVersion The VRRP version for this IPv4 virtual router.	Enumerationr/w Enumerated Values: 1 vrrpv2 2 vrrpv3	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.4

VRRP Group table, which consists of a sequence (i.e., one
or more conceptual rows) of 'vrrpGroupEntry' items.

alaVrrpGroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1

An entry in the vrrpGroupTable containing the
characteristics of a VRRP group.

Indexes

alaVrrpGroupId

Column	Syntax	OID
alaVrrpGroupId This object contains the Tracking Policy Identifier (GROUPID).	AlaVrGroupId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a virtual router group.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.1
alaVrrpGroupInterval The VRRP Group time interval, in seconds, between sending advertisement messages.	secondsInteger32r/w Constraints: range: 1-255	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.2
alaVrrpGroupPriority This object specifies the VRRP Group priority to be used for the virtual router master election process. Higher values imply higher priority.	Integer32r/w Constraints: range: 1-254	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.3
alaVrrpGroupPreemptMode The VRRP Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.4
alaVrrpGroupAdminState This object is used to force a change in to the vrrpOperAdminState of virtual routers in the corresponding alaVRRPAssoGroupTable entry. Setting a value of allEnable will cause the vrrpOperAdminState of each vrrpOperEnt…	Enumerationr/w Enumerated Values: 1 allEnable 2 enable 3 disable	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.5
alaVrrpGroupSetParam This object is used to force the virtual routers in the corresponding alaVRRPAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. …	Enumerationr/w Enumerated Values: 1 none 2 all 3 interval 4 priority 5 preempt	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.6
alaVrrpGroupOverride This object is used in combination with the alaVrrpGroupSetParam object to force all virtual routers in the corresponding alaVrrpAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.7
alaVrrpGroupRowStatus The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.8

The table of virtual routers associated with this group.

alaVrrpAssoGroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1

An entry in the table contains a virtual router id that is
associated with a virtual router group.

Indexes

alaVrrpGroupId IF-MIBifIndex VRRP-MIBvrrpOperVrId

Column	Syntax	OID
alaVrrpAssoGroupRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1.1

VRRP version 3 Group table, which consists of a 
sequence (i.e., one or more conceptual rows) of
'alaVrrpv3GroupEntry' items.

alaVrrpv3GroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1

An entry in the vrrpv3GroupTable containing the
characteristics of a VRRP version 3 group.

Indexes

alaVrrpv3GroupId

Column	Syntax	OID
alaVrrpv3GroupId This object contains the VRRP version 3 Group Identifier (GROUPID).	AlaVrGroupId Type Constraints: range: 1..255 Description: A number that serves to uniquely identify a virtual router group.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.1
alaVrrpv3GroupInterval The VRRP version 3 Group time interval, in seconds, between sending advertisement messages.	centisecondsSNMPv2-TCTimeIntervalr/w Constraints: range: 1-4095 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.2
alaVrrpv3GroupPriority This object specifies the VRRP version 3 Group priority to be used for the virtual router master election process. Higher values imply higher priority.	Integer32r/w Constraints: range: 1-254	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.3
alaVrrpv3GroupPreemptMode The VRRP version 3 Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.4
alaVrrpv3GroupAcceptMode The VRRP version 3 Group accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.5
alaVrrpv3GroupVersion The IPv4 VRRP group version.	Enumerationr/w Enumerated Values: 1 vrrpv2 2 vrrpv3	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.6
alaVrrpv3GroupAdminState This object is used to force a change in to the vrrpv3OperationsRowStatus of virtual routers in the corresponding alaVRRPv3AssoGroupTable entry. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of …	Enumerationr/w Enumerated Values: 1 allEnable 2 enable 3 disable	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.7
alaVrrpv3GroupSetParam This object is used to force the virtual routers in the corresponding alaVRRPv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInterval, alaVrrpv3GroupPriority, alaVrrpv3GroupPreemptMo…	Enumerationr/w Enumerated Values: 1 none 2 all 3 interval 4 priority 5 preempt 6 accept 7 version	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.8
alaVrrpv3GroupOverride This object is used in combination with the alaVrrpv3GroupSetParam object to force all virtual routers in the corresponding alaVrrpv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInte…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.9
alaVrrpv3GroupRowStatus The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.10

The table of VRRP version 3 virtual routers 
associated with this group.

alaVrrpv3AssoGroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1

An entry in the table contains a virtual router id that is
associated with a VRRP version 3 virtual router group.

Indexes

alaVrrpv3GroupId VRRPV3-MIBvrrpv3OperationsInetAddrType IF-MIBifIndex VRRPV3-MIBvrrpv3OperationsVrId

Column	Syntax	OID
alaVrrpv3AssoGroupRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1.1