ALCATEL-ENT1-TIMETRA-SAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
45
Rows
45
Columns
555

sapBaseInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.2 · 1 row entry · 42 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapBaseInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapBaseInfoTable' 
A table that contains basic SAP information.
sapBaseInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.2.1
Information about a specific SAP.
Indexes
Column Syntax OID
sapPortId
The ID of the access port where this SAP
is defined.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.1
sapEncapValue
The value of the label used to identify this
SAP on the access port specified by sapPortId.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.2
sapRowStatus
This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.3
sapType
This object indicates the type of service where
this SAP is defined.
ALCATEL-ENT1-TIMETRA-SERV-MIBServType
Type Values:
0unknown
1epipe
2p3pipe
3tls
4vprn
5ies
6mirror
7apipe
8fpipe
9ipipe
10cpipe
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.4
sapDescription
Generic information about this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.5
sapAdminStatus
The desired state of this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.6
sapOperStatus
The value of the object sapOperStatus indicates the
operating state of this SAP.
Enumeration
Enumerated Values:
1up
2down
3ingressQosMismatch
4egressQosMismatch
5portMtuTooSmall
6svcAdminDown
7iesIfAdminDown
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.7
sapIngressQosPolicyId
The value of the object sapIngressQosPolicyId specifies
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAPs that
cannot…
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.8
sapIngressMacFilterId
The value of the object sapIngressMacFilterId specifies
the row index in the tMacFilterTable corresponding to this
ingress filter, or zero if no filter is specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.9
sapIngressIpFilterId
The value of the object sapIngressIpFilterId specifies the
row index in the tIPFilterTable corresponding to this
ingress filter, or zero if no filter is specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.10
sapEgressQosPolicyId
The row index in the tSapEgressTable
corresponding to this egress QoS policy,
or one if no policy is specified.
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyIDr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.11
sapEgressMacFilterId
The row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.12
sapEgressIpFilterId
The row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.13
sapMirrorStatus
This object specifies whether traffic
mirroring has been enabled on this SAP.
Enumeration
Enumerated Values:
1ingress
2egress
3ingressAndEgress
4disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.14
sapIesIfIndex
When the value of sapType is 'ies' this
object specifies the index of the IES interface
where this SAP is defined. The value of this object
can be set only when the row is created and cannot
be changed while the row sta…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.15
sapLastMgmtChange
The value of sysUpTime at the time of the
most recent management-initiated change to
this SAP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.16
sapCollectAcctStats
When the value of this object is 'true' the agent
collects accounting statistics on this SAP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.17
sapAccountingPolicyId
This object specifies the policy to use to collect
accounting statistics on this SAP. The value zero
indicates that the agent should use the default
accounting policy, if one exists.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.18
sapVpnId
The VPN ID of the associated service.
ALCATEL-ENT1-TIMETRA-SERV-MIBVpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.19
sapCustId
The Customer ID of the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.20
sapCustMultSvcSite
The value of this object, when not null, indicates
the Multi-Service Site this SAP is a member of. This
information is used to configure the ingress and
egress QoS schedulers for this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.21
sapIngressQosSchedulerPolicy
This object can be set only when sapCustMultSvcSite
is null. It indicates the ingress QoS scheduler for
this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.22
sapEgressQosSchedulerPolicy
This object can be set only when sapCustMultSvcSite
is null. It indicates the egress QoS scheduler for
this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.23
sapSplitHorizonGrp
This object specifies the name of the split-horizon
group where the SAP belongs to. This object can be
set only at the time the row is created. Per default
a SAP does not belong to any split-horizon group. The
name spec…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.24
sapIngressSharedQueuePolicy
This object indicates the ingress shared queue policy
used by this SAP. When the value of this object is null
it means that the SAP will use individual ingress QoS
queues, instead of the shared ones.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.25
sapIngressMatchQinQDot1PBits
This object applies only to SAP's defined on a port
configured for qinq service encapsulation. It indicates
which 802.1P bits will be used to match a QoS or a MAC
filter policy when a double-tagged frame is received on
…
Enumerationr/w
Enumerated Values:
1default
2top
3bottom
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.26
sapOperFlags
This object specifies all the conditions that
affect the operating status of this SAP.
Bits
Enumerated Values:
0sapAdminDown
1svcAdminDown
2iesIfAdminDown
3portOperDown
4portMtuTooSmall
5l2OperDown
6ingressQosMismatch
7egressQosMismatch
8relearnLimitExceeded
9recProtSrcMac
10subIfAdminDown
11sapIpipeNoCeIpAddr
12sapTodResourceUnavail
13sapTodMssResourceUnavail
14sapParamMismatch
15sapCemNoEcidOrMacAddr
16sapStandbyForMcRing
17sapSvcMtuTooSmall
18ingressNamedPoolMismatch
19egressNamedPoolMismatch
20ipMirrorNoMacAddr
21sapEpipeNoRingNode
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.27
sapLastStatusChange
The value of sysUpTime at the time of the
most recent operating status change to this
SAP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.28
sapAntiSpoofing
The value of the object sapAntiSpoofing specifies
the type of anti-spoof filtering applicable on this SAP.

'nextHopIpAndMacAddr (4)' is not supported on SR-1, where
the value of ALCATEL-IND1-TIMETRA-CHASS…
Enumerationr/w
Enumerated Values:
0disabled
1sourceIpAddr
2sourceMacAddr
3sourceIpAndMacAddr
4nextHopIpAndMacAddr
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.29
sapIngressIpv6FilterId
The value of the object sapIngressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this ingress ipv6 filter, or zero if no ipv6 filter is
specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.30
sapEgressIpv6FilterId
The value of the object sapEgressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this egress ipv6 filter, or zero if no ipv6 filter is
specified.
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.31
sapTodSuite
The value of the object sapTodSuite specifies the Time of
Day (ToD) suite to be applied on this SAP.
An empty string indicates that no ToD suite is applied
on this SAP.
A set request will only be allowed, if the indicat…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.32
sapIngUseMultipointShared
When the value of sapIngressSharedQueuePolicy is not null,
the value of the object sapIngUseMultipointShared
specifies whether this SAP uses the multipoint-shared
queues of the shared policy.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.33
sapEgressQinQMarkTopOnly
When the encapsulation type of the access port where
this SAP is defined is qinq, the value of the object
sapEgressQinQMarkTopOnly specifies which P-bits to mark
during packet egress. When the value is false both set
of…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.34
sapEgressAggRateLimit
The value of the object sapEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit.
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..40000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.35
sapEndPoint
The value of the object sapEndPoint specifies the service
endpoint to which this SAP is attached. The svcId of the
SAP MUST match the svcId of the service endpoint.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.36
sapIngressVlanTranslation
The value of sapIngressVlanTranslation specifies the
desired Ingress Vlan Translation.

A value of 'vlanId' specifies that the value of
sapIngressVlanTranslationId is to be used to overwrite
the preserved…
Enumerationr/w
Enumerated Values:
1none
2vlanId
3copyOuter
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.37
sapIngressVlanTranslationId
The value of sapIngressVlanTranslationId specifies the
VLAN id to be used to overwrite the preserved VLAN id
in the packet.

An 'inconsistentValue' error is returned when an
attempt is made to set the valu…
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.38
sapSubType
The value of the object sapSubType indicates the
sub-type for this SAP.

A value of 'regular' indicates a standard SAP.

A value of 'capture' specifies a capturing SAP
in which triggering pac…
Enumerationr/w
Enumerated Values:
0regular
1capture
2managed
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.39
sapCpmProtPolicyId
The value of sapCpmProtPolicyId associates a CPM Protection policy
with a SAP.

A value of zero (0) specifies that no CPM Protection policy is
associated with this SAP.

A value of one (1) s…
ALCATEL-ENT1-TIMETRA-TC-MIBTCpmProtPolicyIDr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.40
sapCpmProtMonitorMac
The value of sapCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied.

If the value of sapCpmProtMonitorMac is 'true', the per-source rate lim…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.41
sapEgressFrameBasedAccounting
The value of sapEgressFrameBasedAccounting specifies whether
to use frame-based accounting when evaluating
sapEgressAggRateLimit for all egress queues for this SAP.

If the value is 'false', the default p…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.42

sapTlsInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.3 · 1 row entry · 73 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsInfoTable' 
A table that contains TLS SAP information.
sapTlsInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.3.1
TLS specific information about a SAP.
Indexes
Column Syntax OID
sapTlsStpAdminStatus
The value of the object sapTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1
sapTlsStpPriority
The value of the object sapTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP. As only the most significant 4
b…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2
sapTlsStpPortNum
The value of the object sapTlsStpPortNum specifies the
value of the port number field which is contained in the
least significant 12 bits of the 16-bit Port ID associated
with this SAP. Values in the range 2048..4094 ar…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3
sapTlsStpPathCost
The value of the object sapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port.
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4
sapTlsStpRapidStart
The value of the object sapTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on this SAP are driven by the value of the 'Hell…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5
sapTlsStpBpduEncap
The value of the object sapTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP.
Enumerationr/w
Enumerated Values:
1dynamic
2dot1d
3pvst
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6
sapTlsStpPortState
The value of the object sapTlsStpPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge …
ALCATEL-ENT1-TIMETRA-SERV-MIBTStpPortState
Type Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7
sapTlsStpDesignatedBridge
The value of the object sapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment.
ALCATEL-ENT1-TIMETRA-SERV-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8
sapTlsStpDesignatedPort
The value of the object sapTlsStpDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9
sapTlsStpForwardTransitions
The value of the object sapTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10
sapTlsStpInConfigBpdus
The value of the object sapTlsStpInConfigBpdus indicates
the number of Configuration BPDUs received on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11
sapTlsStpInTcnBpdus
The value of the object sapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12
sapTlsStpInBadBpdus
This object specifies the number of bad
BPDUs received on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13
sapTlsStpOutConfigBpdus
The value of the object sapTlsStpOutConfigBpdus indicates
the number of Configuration BPDUs sent out this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14
sapTlsStpOutTcnBpdus
This object specifies the number of Topology
Change Notification BPDUs sent out this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15
sapTlsStpOperBpduEncap
The value of the object sapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP.
Enumeration
Enumerated Values:
1dynamic
2dot1d
3pvst
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16
sapTlsVpnId
The value of the object sapTlsVpnId indicates the VPN ID
of the associated service.
ALCATEL-ENT1-TIMETRA-SERV-MIBVpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17
sapTlsCustId
The Customer ID of the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18
sapTlsMacAddressLimit
The value of the object sapTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP. When the value of
ALCATEL-IND1-TIMETRA-C…
Integer32r/w
Constraints:
range: 0-196607
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19
sapTlsNumMacAddresses
The value of the object sapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
addresses are counted).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20
sapTlsNumStaticMacAddresses
The value of the object sapTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21
sapTlsMacLearning
The value of the object sapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22
sapTlsMacAgeing
The value of the object sapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23
sapTlsStpOperEdge
The value of the object sapTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object
is initialized to the value of sapTlsStpRapidStart and is
set FALSE on reception of a BPDU.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24
sapTlsStpAdminPointToPoint
The value of the object sapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sap. The value
'forceTrue' means that this port should always be
treated as …
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25
sapTlsStpPortRole
sapTlsStpPortRole indicates the current role of the
sap as defined by the Rapid Spanning Tree Protocol.
ALCATEL-ENT1-TIMETRA-SERV-MIBStpPortRole
Type Values:
0master
1root
2designated
3alternate
4backup
5disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26
sapTlsStpAutoEdge
sapTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27
sapTlsStpOperProtocol
sapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned.
ALCATEL-ENT1-TIMETRA-SERV-MIBStpProtocol
Type Values:
0notApplicable
1stp
2rstp
3mstp
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28
sapTlsStpInRstBpdus
The value of the object sapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29
sapTlsStpOutRstBpdus
The value of the object sapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30
sapTlsLimitMacMove
When sapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When
the …
ALCATEL-ENT1-TIMETRA-SERV-MIBTlsLimitMacMover/w
Type Values:
1blockable
2nonBlockable
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31
sapTlsDhcpSnoopingobsolete
The value of the object sapTlsDhcpSnooping specifies
whether or not DHCP packets received on this SAP will be
snooped. This object was made obsolete in the 3.0 release.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32
sapTlsMacPinning
The value of the object sapTlsMacPinning specifies whether
or not MAC address pinning is active on this SAP. The
value will be set by default to disabled. However for a
SAP that belongs to a residential SHG, the value i…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33
sapTlsDiscardUnknownSource
with the object sapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets with unknown source MAC address are
forw…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34
sapTlsMvplsPruneState
The value of sapTlsMvplsPruneState indicates the mVPLS
prune state of the SAP. The object will be set to
notApplicable if the SAP is not managed by a mVPLS. If
the SAP is managed the state reflects whether or not
the SA…
ALCATEL-ENT1-TIMETRA-SERV-MIBMvplsPruneState
Type Values:
1notApplicable
2notPruned
3pruned
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35
sapTlsMvplsMgmtService
The value of sapTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is
running that is managing this SAP. This object is
only valid if sapTlsMvplsPruneState is different from
notApplicable.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36
sapTlsMvplsMgmtPortId
The value of sapTlsMvplsMgmtPortId indicates the SAP
port Id of the SAP in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP.
This object is only valid if sapTlsMvplsPruneState is
diffe…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37
sapTlsMvplsMgmtEncapValue
The value of sapTlsMvplsMgmtEncapValue indicates the
SAP Encap value of the SAP in the mVPLS instance
specified in sapTlsMvplsMgmtService that is
controlling this SAP. This object is only valid if
sapTlsMvplsPruneState …
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38
sapTlsArpReplyAgent
The value of the object sapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associated with this SAP.
disabled: the ARP reply…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3enabledWithSubscrIdent
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39
sapTlsStpException
The value of the object sapTlsStpException indicates
whether an STP exception condition is present on this
Sap.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
…
ALCATEL-ENT1-TIMETRA-SERV-MIBStpExceptionCondition
Type Values:
1none
2oneWayCommuniation
3downstreamLoopDetected
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40
sapTlsAuthenticationPolicy
The value of the object sapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authentication
policies must be defined in tmn…
ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41
sapTlsL2ptTermination
The value of the object sapTlsL2ptTermination specifies
whether received L2 Protocol Tunnel pdu's are terminated
on this port or sap
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42
sapTlsBpduTranslation
The value of the object sapTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or sap
Enumerationr/w
Enumerated Values:
1auto
2disabled
3pvst
4stp
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43
sapTlsStpRootGuard
The value of the object sapTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connectiv…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44
sapTlsStpInsideRegion
The value of the object sapTlsStpInsideRegion indicates
whether the network connected to the SAP is in the same
MST region. It corresponds to the parameter 'infoInternal'
in 802.1Q.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45
sapTlsEgressMcastGroup
The value of the object sapTlsEgressMcastGroup specifies
the Egress Multicast Group this SAP belongs to.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46
sapTlsStpInMstBpdus
The value of the object sapTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs received
on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47
sapTlsStpOutMstBpdus
The value of the object sapTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs sent out
on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48
sapTlsRestProtSrcMac
The value of the object sapTlsRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests to relearn a protected MAC address will be
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49
sapTlsRestUnprotDstMac
The value of the object sapTlsRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC address…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50
sapTlsStpRxdDesigBridge
The value of the object sapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connected to the SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51
sapTlsStpRootGuardViolation
The value of the object sapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when sapTlsStpRootGuard
is set to true.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52
sapTlsShcvAction
The value of the object sapTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails.
Enumerationr/w
Enumerated Values:
1alarm
2remove
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53
sapTlsShcvSrcIp
The value of the object sapTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54
sapTlsShcvSrcMac
The value of the object sapTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55
sapTlsShcvInterval
The value of the object sapTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking.
minutesUnsigned32r/w
Constraints:
range: 0-6000
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56
sapTlsMvplsMgmtMsti
The value of the object sapTlsMvplsMgmtMsti indicates the
MST-instance in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP. A
value of 0 indicates the CIST.
This object is only valid i…
ALCATEL-ENT1-TIMETRA-SERV-MIBMstiInstanceIdOrZero
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57
sapTlsMacMoveNextUpTime
The value of the object sapTlsMacMoveNextUpTime counts down
the time in seconds until a SAP that has been brought down
due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags
'relearnLimitExceeded', is automatically…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58
sapTlsMacMoveRateExcdLeft
The value of the object sapTlsMacMoveRateExcdLeft
counts down the number of times this SAP can exceed the
TLS svcTlsMacMoveMaxRate and still be automatically
brought up.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59
sapTlsRestProtSrcMacAction
The value of the object sapTlsRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP.
When the value of this object is 'disable' the SAP
will be …
Enumerationr/w
Enumerated Values:
1disable
2alarm-only
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60
sapTlsL2ptForceBoundary
The value of sapTlsL2ptForceBoundary specifies if
sapTlsL2ptTermination is enforced for its managed SAP's.
Setting the value of the object sapTlsL2ptForceBoundary of
a SAP in a Management VPLS to `true' forces all its…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61
sapTlsLimitMacMoveLevel
The value of the object sapTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind…
ALCATEL-ENT1-TIMETRA-SERV-MIBTlsLimitMacMoveLevelr/w
Type Values:
1primary
2secondary
3tertiary
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62
sapTlsBpduTransOper
The value of the object sapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames.
Enumeration
Enumerated Values:
1undefined
2disabled
3pvst
4stp
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63
sapTlsDefMsapPolicy
The value of sapTlsDefMsapPolicy specifies the
default Managed SAP policy to use to create
Managed SAPs when the response from the Radius
server does not specify a Managed SAP policy.

The value of sapTlsD…
ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64
sapTlsL2ptProtocols
The value of the object sapTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or sap
ALCATEL-ENT1-TIMETRA-SERV-MIBL2ptProtocolsr/w
Type Values:
0stp
1cdp
2vtp
3dtp
4pagp
5udld
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65
sapTlsL2ptForceProtocols
The value of the object sapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
sapTlsL2ptForceBoundar…
ALCATEL-ENT1-TIMETRA-SERV-MIBL2ptProtocolsr/w
Type Values:
0stp
1cdp
2vtp
3dtp
4pagp
5udld
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66
sapTlsPppoeMsapTrigger
The value of sapTlsPppoeMsapTrigger specifies whether
the receipt of PPPoE trigger packets on a VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context a…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67
sapTlsDhcpMsapTrigger
The value of sapTlsDhcpMsapTrigger specifies whether
the receipt of DHCP trigger packets on this VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context a…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68
sapTlsMrpJoinTime
The value of sapTlsMrpJoinTime specifies a timer value in
10ths of seconds which determines the maximum rate at
which attribute join messages can be sent on the SAP.
deci-secondsUnsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69
sapTlsMrpLeaveTime
The value of sapTlsMrpLeaveTime specifies a timer value in
10ths of seconds which determines the amount of time a
registered attribute is held in leave state before the
registration is removed.
deci-secondsUnsigned32r/w
Constraints:
range: 30-60
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70
sapTlsMrpLeaveAllTime
The value of sapTlsMrpLeaveAllTime specifies the a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SAP are all
refreshed.
deci-secondsUnsigned32r/w
Constraints:
range: 60-300
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71
sapTlsMrpPeriodicTime
The value of sapTlsMrpPeriodicTime specifies a timer value
in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations.
deci-secondsUnsigned32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72
sapTlsMrpPeriodicEnabled
The value of sapTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73

sapAtmInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.4 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapAtmInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapAtmInfoTable' 
A table that contains ATM SAP information.
sapAtmInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.4.1
Information about a specific ATM SAP.
Indexes
Column Syntax OID
sapAtmEncapsulation
This object specifies the data encapsulation used
over the AAL5 SSCS layer. The definition references
RFC 2684 Multiprotocol Encapsulation over ATM AAL5
and to the ATM Forum LAN Emulation specification.
Enumerationr/w
Enumerated Values:
1vcMultiplexRoutedProtocol
2vcMultiplexBridgedProtocol8023
7llcSnapRoutedProtocol
8multiprotocolFrameRelaySscs
10unknown
11llcSnapBridgedProtocol8023
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.1
sapAtmIngressTrafficDescIndex
This object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the ingress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulat…
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.2
sapAtmEgressTrafficDescIndex
This object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the egress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulati…
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.3
sapAtmOamAlarmCellHandling
A value of up specifies that the OAM status of a pvc
affects the sap operational status and OAM AIS/RDI
cell generation upon a sap operational status of down.
A value of down specifies that the OAM status of a pvc
w…
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.4
sapAtmOamTerminate
The sapAtmOamTerminate object specifies whether this
SAP will act as an OAM termination point.
If enabled, OAM cells will be sunk by the SAP and can
affect the SAP's operational status (if
sapAtmOamAlarmCellHandling is …
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5
sapAtmOamPeriodicLoopback
The sapAtmOamPeriodicLoopback object specifies whether
this SAP will run periodic OAM loopbacks or not. If
enabled, an ATM OAM loopback cell will be transmitted
every period as configured in tAtmSysOamLoopbackPeriod.
I…
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6

sapBaseStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.6 · 1 row entry · 28 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapBaseStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapBaseStatsTable' 
A table that contains basic SAP statistics.
In the descriptions below 'Pchip' refers
to the Alcatel 7x50 SR series Packet Processing
chip, while 'Qchip' refers to the Alcatel 7x50
SR series QoS Queueing Engine chip.
sapBaseStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.6.1
Basic statistics about a specific SAP.
Indexes
Column Syntax OID
sapBaseStatsIngressPchipDroppedPackets
The number of packets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.1
sapBaseStatsIngressPchipDroppedOctets
The number of octets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.2
sapBaseStatsIngressPchipOfferedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.3
sapBaseStatsIngressPchipOfferedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.4
sapBaseStatsIngressPchipOfferedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.5
sapBaseStatsIngressPchipOfferedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.6
sapBaseStatsIngressQchipDroppedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.7
sapBaseStatsIngressQchipDroppedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.8
sapBaseStatsIngressQchipDroppedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.9
sapBaseStatsIngressQchipDroppedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.10
sapBaseStatsIngressQchipForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.11
sapBaseStatsIngressQchipForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12
sapBaseStatsIngressQchipForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.13
sapBaseStatsIngressQchipForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14
sapBaseStatsEgressQchipDroppedInProfPackets
The number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.15
sapBaseStatsEgressQchipDroppedInProfOctets
The number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.16
sapBaseStatsEgressQchipDroppedOutProfPackets
The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.17
sapBaseStatsEgressQchipDroppedOutProfOctets
The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.18
sapBaseStatsEgressQchipForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.19
sapBaseStatsEgressQchipForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20
sapBaseStatsEgressQchipForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.21
sapBaseStatsEgressQchipForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22
sapBaseStatsCustId
The Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.23
sapBaseStatsIngressPchipOfferedUncoloredPackets
The number of uncolored packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.24
sapBaseStatsIngressPchipOfferedUncoloredOctets
The number of uncolored octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.25
sapBaseStatsAuthenticationPktsDiscarded
The number of DHCP packets discarded
as result of authentication.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.26
sapBaseStatsAuthenticationPktsSuccess
The number of DHCP packets successfully authenticated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.27
sapBaseStatsLastClearedTime
The value of sapBaseStatsLastClearedTime indicates
the sysUpTime when the counters in this table were
last cleared.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.28

sapIngQosQueueStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.7 · 1 row entry · 16 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngQosQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngQosQueueStatsTable' 
A table that contains ingress QoS queue SAP
statistics.
sapIngQosQueueStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.7.1
Ingress statistics about a specific SAP's
QoS queue.
Indexes
Column Syntax OID
sapIngQosQueueId
The index of the ingress QoS queue of
this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBTSapIngQueueId
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.1
sapIngQosQueueStatsOfferedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.2
sapIngQosQueueStatsDroppedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.3
sapIngQosQueueStatsOfferedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.4
sapIngQosQueueStatsDroppedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.5
sapIngQosQueueStatsOfferedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.6
sapIngQosQueueStatsDroppedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.7
sapIngQosQueueStatsOfferedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.8
sapIngQosQueueStatsDroppedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.9
sapIngQosQueueStatsForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.10
sapIngQosQueueStatsForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.11
sapIngQosQueueStatsForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.12
sapIngQosQueueStatsForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.13
sapIngQosCustId
The Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.14
sapIngQosQueueStatsUncoloredPacketsOffered
The number of uncolored packets offered to
the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.15
sapIngQosQueueStatsUncoloredOctetsOffered
The number of uncolored octets offered to
the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.16

sapEgrQosQueueStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.8 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosQueueStatsTable' 
A table that contains egress QoS queue SAP
statistics.
sapEgrQosQueueStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.8.1
Egress statistics about a specific SAP's
QoS queue.
Indexes
Column Syntax OID
sapEgrQosQueueId
The index of the egress QoS queue of
this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBTSapEgrQueueId
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.1
sapEgrQosQueueStatsForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.2
sapEgrQosQueueStatsDroppedInProfPackets
The number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.3
sapEgrQosQueueStatsForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.4
sapEgrQosQueueStatsDroppedOutProfPackets
The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.5
sapEgrQosQueueStatsForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.6
sapEgrQosQueueStatsDroppedInProfOctets
The number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.7
sapEgrQosQueueStatsForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.8
sapEgrQosQueueStatsDroppedOutProfOctets
The number of out-of-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.9
sapEgrQosCustId
The Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.10

sapIngQosSchedStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.9 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngQosSchedStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngQosSchedStatsTable' 
A table that contains ingress QoS queue SAP
statistics.
sapIngQosSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.9.1
Ingress statistics about a specific SAP's
QoS queue.
Indexes
Column Syntax OID
sapIngQosSchedName
The index of the ingress QoS scheduler of
this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.1
sapIngQosSchedStatsForwardedPackets
The number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.2
sapIngQosSchedStatsForwardedOctets
The number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.3
sapIngQosSchedCustId
The Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.4

sapEgrQosSchedStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.10 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosSchedStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosSchedStatsTable' 
A table that contains ingress QoS queue SAP
statistics.
sapEgrQosSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.10.1
Egress statistics about a specific SAP's
QoS queue.
Indexes
Column Syntax OID
sapEgrQosSchedName
The index of the egress QoS scheduler of
this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.1
sapEgrQosSchedStatsForwardedPackets
The number of forwarded packets by the
egress Qchip, as determined by the SAP
egress scheduler policy.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.2
sapEgrQosSchedStatsForwardedOctets
The number of forwarded octets by the
egress Qchip, as determined by the SAP
egress scheduler policy.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.3
sapEgrQosSchedCustId
The Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.4

sapTlsManagedVlanListTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.11 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsManagedVlanListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsManagedVlanListTable' 
This table is used only for SAPs that are part
of a management VPLS. It indicates for each SAP the
ranges of associated VLANs that will be affected when
the SAP changes state.
sapTlsManagedVlanListEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.11.1
Each row specifies a range of VLANS associated
with a SAP of a MVPLS. Ranges may contains overlapping
sections only for Mvpls SAPs that belong to the same
service.
Indexes
Column Syntax OID
sapTlsMvplsMinVlanTag
The value of sapTlsMvplsMinVlanTag specifies
the left bound (i.e. min. value) of a range of VLANs
that are associated with the Mvpls SAP.
sapTlsMvplsMinVlanTag must be smaller than (or equal
to) sapTlsMvplsMaxVlanTag.
S…
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.1
sapTlsMvplsMaxVlanTag
The value of sapTlsMvplsMaxVlanTag specifies the
right bound (i.e. max. value) of a range of VLANs that
are associated with the Mvpls SAP.
Special values are:
0: this value is reserved for the null tag.
4095: this value…
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.2
sapTlsMvplsRowStatus
The value of sapTlsMvplsRowStatus specifies
the status of this row. The only values supported
during a set operation are 'createAndGo' and
'destroy'. A row (i.e. a range of VLAN tags) can be
destroyed only if there are …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.3

sapAntiSpoofTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.12 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapAntiSpoofTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapAntiSpoofTable' 
The sapAntiSpoofTable contains information about
anti-spoofing filters on a SAP.
sapAntiSpoofEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.12.1
An entry in the sapAntiSpoofTable.
Indexes
Column Syntax OID
sapAntiSpoofIpAddress
The value of sapAntiSpoofIpAddress indicates the IP
address for which this table entry contains information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.4.3.12.1.1
sapAntiSpoofMacAddress
The value of sapAntiSpoofMacAddress indicates the MAC
address for which this table entry contains information.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.12.1.2

sapStaticHostTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.13 · 1 row entry · 18 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapStaticHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapStaticHostTable' 
The sapStaticHostTable is used to configure static hosts
on a SAP.
sapStaticHostEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.13.1
Each row entry represents information on a statically
configured host. Entries can be created and deleted via
SNMP SET operations.
Indexes
Column Syntax OID
sapStaticHostRowStatus
The value of the object sapStaticHostRowStatus controls
the creation and deletion of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.1
sapStaticHostIpAddress
The value of the object sapStaticHostIpAddress specifies
the IP address associated with this static host. The value
0.0.0.0 indicates that no host IP address is specified.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.2
sapStaticHostMacAddress
The value of the object sapStaticHostMacAddress specifies
the MAC address associated with this static host. The
value 0:0:0:0:0:0 indicates that no host MAC address is
specified.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.3
sapStaticHostSubscrIdent
The value of the object sapStaticHostSubscrIdent specifies
the subscriber identification for this static host.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.4
sapStaticHostSubProfile
The value of the object sapStaticHostSubProfile specifies
the subscriber profile for this static host. The specified
subscriber profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.5
sapStaticHostSlaProfile
The value of the object sapStaticHostSlaProfile specifies
the SLA profile for this static host. The specified
SLA profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.6
sapStaticHostShcvOperState
The value of the object sapStaticHostShcvOperState
gives the state of the subscriber host connectivity
check for this static host.
Enumeration
Enumerated Values:
1disabled
2undefined
3down
4up
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.7
sapStaticHostShcvChecks
The value of the object sapStaticHostShcvChecks specifies
the number of connectivity checks for this static host.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.8
sapStaticHostShcvReplies
The value of the object sapStaticHostShcvReplies specifies
the number of host replies for this static host.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.9
sapStaticHostShcvReplyTime
The value of the object sapStaticHostShcvReplyTime
gives the timestamp of the last successful connectivity
check for this static host.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.10
sapStaticHostDynMacAddress
The value of the object sapStaticHostDynMacAddress gives
the MAC address learned via ARP in case this is an IP-only
static host (sapStaticHostMacAddress is set to
0:0:0:0:0:0).
The value 0:0:0:0:0:0 indicates that no MA…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.11
sapStaticHostRetailerSvcId
The value of the object sapStaticHostRetailerSvcId
indicates the service ID of the retailer VPRN service
to which this static host belongs. When this object is
non zero, the static host belongs to a retailer VPRN.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.12
sapStaticHostRetailerIf
The value of the object sapStaticHostRetailerIf indicates
the interface index of the retailer VPRN interface to which
this static host belongs. When this object is non zero,
the static host belongs to a retailer VPRN.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.13
sapStaticHostFwdingState
The value of sapStaticHostFwdingState indicates the
forwarding state of this static host. When the value
is 'outOfService', host traffic is not forwarded.
When it is 'inService', host traffic is forwarded.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.14
sapStaticHostAncpString
The value of sapStaticHostAncpString specifies
the ancp-string associated to this SAP host.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.15
sapStaticHostSubIdIsSapId
The value of the object sapStaticHostSubIdIsSapId
specifies whether the SAP-id is taken as subscriber
identification for this static host.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.16
sapStaticHostAppProfile
The value of sapStaticHostAppProfile specifies
the application profile for this static host. The
specified application profile needs to exist in the
TIMETRA-BSX-MIB::tmnxBsxAppProfTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.17
sapStaticHostIntermediateDestId
The value of sapStaticHostIntermediateDestId specifies
to which intermediate destination (for example a DSLAM)
this host belongs.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.18

sapTlsDhcpInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.14 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsDhcpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsDhcpInfoTable' 
sapTlsDhcpInfoTable  contains  DHCP information related
to a TLS  SAP.  This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this
table are created and deleted automatically by the system.
sapTlsDhcpInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.14.1
DHCP specific information for a TLS SAP.
Indexes
Column Syntax OID
sapTlsDhcpAdminState
The value of the object sapTlsDhcpAdminState specifies
the overall enable/disable state of all DHCP related
actions on this Sap. The value 'disabled' allows
the user to configure individual DHCP commands but
adminis…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.1
sapTlsDhcpDescription
The value of the object sapTlsDhcpDescription specifies
a user provided description for DHCP on this Sap.
It consists of any printable, seven-bit ASCII characters
up to 80 characters in length.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.2
sapTlsDhcpSnoop
The value of the object sapTlsDhcpSnoop specifies
the enable/disable state for DHCP snooping on this Sap.
Note that in order for snooping to be enabled
the object sapTlsDhcpAdminState must also have the
value enabled.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.3
sapTlsDhcpLeasePopulate
The value of the object sapTlsDhcpLeasePopulate specifies
the maximum number of DHCP lease states allowed on this
SAP.
Unsigned32r/w
Constraints:
range: 0-8000
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.4
sapTlsDhcpOperLeasePopulate
The value of the object sapTlsDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP.
Unsigned32
Constraints:
range: 0-8000
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.5
sapTlsDhcpInfoAction
The value of the object sapTlsDhcpInfoAction specifies
the DHCP option reforwarding policy:
'replace' - replace existing information with
configured information
'drop' - discard messages with existing rel…
Enumerationr/w
Enumerated Values:
1replace
2drop
3keep
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.6
sapTlsDhcpCircuitId
The value of the object sapTlsDhcpCircuitId specifies
whether or not the circuit-id suboption is present, and if
it is present what information goes in it:
- 'none' the circuit-id suboption will not be part
…
Enumerationr/w
Enumerated Values:
0none
1asciiTuple
2vlanAsciiTuple
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.7
sapTlsDhcpRemoteId
The value of the object sapTlsDhcpRemoteId specifies
what information goes into the remote-id suboption in
the DHCP Relay packet.
If the value of this object is set to 'none',
the remote-id suboption will not be part of…
Enumerationr/w
Enumerated Values:
1none
2mac
3remote-id
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.8
sapTlsDhcpRemoteIdString
The value of the object sapTlsDhcpRemoteIdString specifies
the remote-id. This object exists only if
sapTlsDhcpRemoteId has a value of 'remote-id'.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.9
sapTlsDhcpProxyAdminState
The value of sapTlsDhcpProxyAdminState specifies the
desired administrative state of the proxy server on this
interface.

Note that in order for the proxy server to be enabled,
the value of sapTlsDhcpAdmi…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.10
sapTlsDhcpProxyServerAddr
The value of sapTlsDhcpProxyServerAddr specifies
the IP address which will be used as the source address
of the emulated DHCP server in the context of
this VPLS SAP.

This address is mandatory for the pr…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.11
sapTlsDhcpProxyLeaseTime
The value of sapTlsDhcpProxyLeaseTime specifies in seconds
how long a DHCP client is allowed to use the offered IP
address.

Value 0 means the lease time provided by a RADIUS or
an upstream DHCP server wi…
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 300-315446399
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.12
sapTlsDhcpProxyLTRadiusOverride
The value of sapTlsDhcpProxyLTRadiusOverride specifies
whether or not the lease time provided by the RADIUS
server is presented to the DHCP client.

By default the proxy-server will always make use of
sa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.13
sapTlsDhcpVendorIncludeOptions
The value of sapTlsDhcpVendorIncludeOptions specifies
what is encoded in the Alcatel vendor specific
sub-option of option 82.

The value of this object is only used when
sapTlsDhcpInfoAction is 'replace'.
Bitsr/w
Enumerated Values:
0systemId
1clientMac
2serviceId
3sapId
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.14
sapTlsDhcpVendorOptionString
The value of sapTlsDhcpVendorOptionString specifies the
string that goes into the Alcatel vendor specific
sub-option of option 82.

This string is only used when sapTlsDhcpInfoAction is set
to 'replace'.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.15

sapTlsDhcpStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.15 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsDhcpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsDhcpStatsTable' 
sapTlsDhcpStatsTable contains DHCP statistics related
to  a TLS SAP. This table complements sapTlsInfoTable,
and  contains  an entry for each Tls SAP. Rows in this
table  are  created  and  deleted automatically by the
system.
sapTlsDhcpStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.15.1
DHCP statistics for a TLS SAP.
Indexes
Column Syntax OID
sapTlsDhcpStatsClntSnoopdPckts
The value of the object sapTlsDhcpStatsClntSnoopdPckts
indicates the number of DHCP client packets that have
been snooped on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.1
sapTlsDhcpStatsSrvrSnoopdPckts
The value of the object sapTlsDhcpStatsSrvrSnoopdPckts
indicates the number of DHCP server packets that have
been snooped on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.2
sapTlsDhcpStatsClntForwdPckts
The value of the object sapTlsDhcpStatsClntForwdPckts
indicates the number of DHCP client packets that
have been forwarded on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.3
sapTlsDhcpStatsSrvrForwdPckts
The value of the object sapTlsDhcpStatsSrvrForwdPckts
indicates the number of DHCP server packets that have
been forwarded on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.4
sapTlsDhcpStatsClntDropdPckts
The value of the object sapTlsDhcpStatsClntDropdPckts
indicates the number of DHCP client packets that have
been dropped on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.5
sapTlsDhcpStatsSrvrDropdPckts
The value of the object sapTlsDhcpStatsSrvrDropdPckts
indicates the number of DHCP server packets that have
been dropped on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.6
sapTlsDhcpStatsClntProxRadPckts
The value of the object sapTlsDhcpStatsClntProxRadPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on data received from a
RADIUS server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.7
sapTlsDhcpStatsClntProxLSPckts
The value of the object sapTlsDhcpStatsClntProxLSPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on a lease state. The
lease itself can have been obtained from a DHCP or RADIUS…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.8
sapTlsDhcpStatsGenReleasePckts
The value of the object sapTlsDhcpStatsGenReleasePckts
indicates the number of DHCP RELEASE messages spoofed on
this SAP to the DHCP server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.9
sapTlsDhcpStatsGenForceRenPckts
The value of the object sapTlsDhcpStatsGenForceRenPckts
indicates the number of DHCP FORCERENEW messages spoofed
on this SAP to the DHCP clients.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.10

sapTlsDhcpLeaseStateTable

table obsolete
.1.3.6.1.4.1.6527.3.1.2.4.3.16 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsDhcpLeaseStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsDhcpLeaseStateTable' 
sapTlsDhcpLeaseStateTable contains DHCP lease state info
for a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this table
are created and deleted automatically by the system.
The content of this table is moved to the
svcDhcpLeaseStateTable.
sapTlsDhcpLeaseStateEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.16.1
DHCP Lease State information on a TLS SAP.
Indexes
Column Syntax OID
sapTlsDhcpLseStateCiAddrobsolete
The value of the object sapTlsDhcpLseStateCiAddr indicates
the IP address of the DHCP lease state.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.1
sapTlsDhcpLseStateChAddrobsolete
The value of the object sapTlsDhcpLseStateChAddr indicates
the MAC address of the DHCP lease state.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.2
sapTlsDhcpLseStateRemainLseTimeobsolete
The value of the object sapTlsDhcpLseStateRemainLseTime
indicates the remaining lease time of the Ip address of
the DHCP lease state.
This object was made obsolete in the 4.0 release.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.3
sapTlsDhcpLseStateOption82obsolete
The value of the object sapTlsDhcpLseStateOption82
indicates the content of the Option82 for this DHCP
lease state.
This object was made obsolete in the 4.0 release.
OctetString .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.4
sapTlsDhcpLseStatePersistKeyobsolete
The value of the object sapTlsDhcpLseStatePersistKey
indicates a key value that can be used to track this lease
state in the persistence file.
This object was made obsolete in the 4.0 release.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.5

sapPortIdIngQosSchedStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.17 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapPortIdIngQosSchedStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapPortIdIngQosSchedStatsTable' 
The sapPortIdIngQosSchedStatsTable contains ingress QoS
queue SAP statistics. This table is used when the SAP
is  a CCAG or LAG in 'link' mode, or an APS.
sapPortIdIngQosSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.17.1
Each entry represents the ingress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP.
Indexes
Column Syntax OID
sapPortIdIngQosSchedName
The value of sapPortIdIngQosSchedName is used as an index
of the ingress QoS scheduler of this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.1
sapPortIdIngPortId
The value of sapPortIdIngPortId is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
ap…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.2
sapPortIdIngQosSchedFwdPkts
The value of sapPortIdIngQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.3
sapPortIdIngQosSchedFwdOctets
The value of sapPortIdIngQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.4
sapPortIdIngQosSchedCustId
The value of sapPortIdIngQosSchedCustId indicates the
Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.5

sapPortIdEgrQosSchedStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.18 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapPortIdEgrQosSchedStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapPortIdEgrQosSchedStatsTable' 
The sapPortIdEgrQosSchedStatsTable contains egress QoS
queue SAP statistics. This table is used when the SAP
is  a CCAG or LAG in 'link' mode, or an APS.
sapPortIdEgrQosSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.18.1
Each entry represents the egress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP.
Indexes
Column Syntax OID
sapPortIdEgrQosSchedName
The value of sapPortIdEgrQosSchedName is used as an index
of the egress QoS scheduler of this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.1
sapPortIdEgrPortId
The value of sapPortIdEgrPortId is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
app…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.2
sapPortIdEgrQosSchedFwdPkts
The value of sapPortIdEgrQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.3
sapPortIdEgrQosSchedFwdOctets
The value of sapPortIdEgrQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.4
sapPortIdEgrQosSchedCustId
The value of sapPortIdEgrQosSchedCustId indicates the
Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.5

sapIngQosQueueInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.19 · 1 row entry · 11 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngQosQueueInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngQosQueueInfoTable' 
This table is used to override the base parameters
of a queue, as defined in the associated SAP
ingress QoS policy.
sapIngQosQueueInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.19.1
Override values for the specified SAP ingress QoS
queue. These values override the corresponding ones
specified in the associated SAP ingress QoS policy.
Indexes
Column Syntax OID
sapIngQosQId
The value of sapIngQosQId indicates the ID of the
queue whose parameters are to be overridden.
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueId
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.1
sapIngQosQRowStatus
The value of sapIngQosQRowStatus controls the creation
and deletion of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.2
sapIngQosQLastMgmtChange
The value of sapIngQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.3
sapIngQosQOverrideFlags
The value of sapIngQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value …
ALCATEL-ENT1-TIMETRA-SERV-MIBTQosQueueAttributer/w
Type Values:
0cbs
1cir
2cirAdaptRule
3mbs
4pir
5pirAdaptRule
6hiPrioOnly
7avgOverhead
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.4
sapIngQosQCBS
The value of sapIngQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue.
kilo bytesALCATEL-ENT1-TIMETRA-QOS-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.5
sapIngQosQMBS
The value of sapIngQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue.
kilo bytesALCATEL-ENT1-TIMETRA-QOS-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.6
sapIngQosQHiPrioOnly
The value of sapIngQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets.
percentALCATEL-ENT1-TIMETRA-QOS-MIBTBurstPercentOrDefaultr/w
Type Constraints:
range: -1..100
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.7
sapIngQosQCIRAdaptation
The value of sapIngQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset.
ALCATEL-ENT1-TIMETRA-QOS-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.8
sapIngQosQPIRAdaptation
The value of sapIngQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset.
ALCATEL-ENT1-TIMETRA-QOS-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.9
sapIngQosQAdminPIR
The value of sapIngQosQAdminPIR specifies the desired
PIR value for this queue.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.10
sapIngQosQAdminCIR
The value of sapIngQosQAdminCIR specifies the desired
CIR value for this queue.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.11

sapEgrQosQueueInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.20 · 1 row entry · 12 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosQueueInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosQueueInfoTable' 
This table is used to override the base parameters
of a queue, as defined in the associated SAP
egress QoS policy.
sapEgrQosQueueInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.20.1
Override values for the specified SAP egress QoS
queue. These values override the corresponding ones
specified in the associated SAP egress QoS policy.
Indexes
Column Syntax OID
sapEgrQosQId
The value of sapEgrQosQId indicates the ID of the
queue whose parameters are to be overridden.
ALCATEL-ENT1-TIMETRA-TC-MIBTEgressQueueId
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1
sapEgrQosQRowStatus
The value of sapEgrQosQRowStatus controls the creation
and deletion of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2
sapEgrQosQLastMgmtChange
The value of sapEgrQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3
sapEgrQosQOverrideFlags
The value of sapEgrQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value …
ALCATEL-ENT1-TIMETRA-SERV-MIBTQosQueueAttributer/w
Type Values:
0cbs
1cir
2cirAdaptRule
3mbs
4pir
5pirAdaptRule
6hiPrioOnly
7avgOverhead
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4
sapEgrQosQCBS
The value of sapEgrQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue.
kilo bytesALCATEL-ENT1-TIMETRA-QOS-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5
sapEgrQosQMBS
The value of sapEgrQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue.
kilo bytesALCATEL-ENT1-TIMETRA-QOS-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6
sapEgrQosQHiPrioOnly
The value of sapEgrQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets.
percentALCATEL-ENT1-TIMETRA-QOS-MIBTBurstPercentOrDefaultr/w
Type Constraints:
range: -1..100
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7
sapEgrQosQCIRAdaptation
The value of sapEgrQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset.
ALCATEL-ENT1-TIMETRA-QOS-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8
sapEgrQosQPIRAdaptation
The value of sapEgrQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset.
ALCATEL-ENT1-TIMETRA-QOS-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9
sapEgrQosQAdminPIR
The value of sapEgrQosQAdminPIR specifies the desired
PIR value for this queue.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10
sapEgrQosQAdminCIR
The value of sapEgrQosQAdminCIR specifies the desired
CIR value for this queue.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11
sapEgrQosQAvgOverhead
The value of sapEgrQosQAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent,
used to translate packet-based rate to frame-based
rate and vice versa.
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12

sapIngQosSchedInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.21 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngQosSchedInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngQosSchedInfoTable' 
This table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP ingress scheduler policy.
sapIngQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.21.1
Override values for the specified SAP ingress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP ingress scheduler
policy.
Indexes
Column Syntax OID
sapIngQosSName
The value of sapIngQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.1
sapIngQosSRowStatus
The value of sapIngQosSRowStatus controls the creation
and deletion of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.2
sapIngQosSLastMgmtChange
The value of sapIngQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.3
sapIngQosSOverrideFlags
The value of sapIngQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute t…
ALCATEL-ENT1-TIMETRA-SERV-MIBTVirtSchedAttributer/w
Type Values:
0cir
1pir
2summedCir
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.4
sapIngQosSPIR
The value of sapIngQosSPIR specifies the desired
PIR value for this virtual scheduler.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.5
sapIngQosSCIR
The value of sapIngQosSCIR specifies the desired
CIR value for this virtual scheduler.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.6
sapIngQosSSummedCIR
The value of sapIngQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapIngQosSCIR) loses its meaning.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.7

sapEgrQosSchedInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.22 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosSchedInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosSchedInfoTable' 
This table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP egress scheduler policy.
sapEgrQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.22.1
Override values for the specified SAP egress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP egress scheduler
policy.
Indexes
Column Syntax OID
sapEgrQosSName
The value of sapEgrQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.1
sapEgrQosSRowStatus
The value of sapEgrQosSRowStatus controls the creation
and deletion of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.2
sapEgrQosSLastMgmtChange
The value of sapEgrQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.3
sapEgrQosSOverrideFlags
The value of sapEgrQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute t…
ALCATEL-ENT1-TIMETRA-SERV-MIBTVirtSchedAttributer/w
Type Values:
0cir
1pir
2summedCir
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.4
sapEgrQosSPIR
The value of sapEgrQosSPIR specifies the desired
PIR value for this virtual scheduler.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.5
sapEgrQosSCIR
The value of sapEgrQosSCIR specifies the desired
CIR value for this virtual scheduler.
kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.6
sapEgrQosSSummedCIR
The value of sapEgrQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapEgrQosSCIR) loses its meaning.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.7

sapSubMgmtInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.23 · 1 row entry · 14 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapSubMgmtInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapSubMgmtInfoTable' 
A table that contains SAP subscriber management
information.
sapSubMgmtInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.23.1
Subscriber management specific information about a SAP.
Indexes
Column Syntax OID
sapSubMgmtAdminStatus
The value of sapSubMgmtAdminStatus specifies whether
enhanced subscriber management is enabled on this SAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.1
sapSubMgmtDefSubProfile
The value of sapSubMgmtDefSubProfile specifies the default
subscriber profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.

A value of '…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.2
sapSubMgmtDefSlaProfile
The value of sapSubMgmtDefSlaProfile specifies the default
SLA profile applicable on this SAP. The corresponding
profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.3
sapSubMgmtSubIdentPolicy
The value of sapSubMgmtSubIdentPolicy specifies the
subscriber identification policy applicable on this SAP.
The corresponding policy is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.4
sapSubMgmtSubscriberLimit
The value of sapSubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for this SAP.

If the value is 0, there is no limit. Only if the value is
1, the 'single-sub-parameters' defined w…
Unsigned32r/w
Constraints:
range: 0-8000
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.5
sapSubMgmtProfiledTrafficOnly
The value of sapSubMgmtProfiledTrafficOnly specifies
whether only profiled traffic is applicable for this SAP.
If set to 'true', all SAP queues will be deleted.

The value of this object is only meaningful…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.6
sapSubMgmtNonSubTrafficSubIdent
The value of sapSubMgmtNonSubTrafficSubIdent specifies the
subscriber identification applicable on this SAP for all
non-subscriber traffic.

The value of this object is only meaningful if
sapSubMgmtSubscri…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.7
sapSubMgmtNonSubTrafficSubProf
The value of sapSubMgmtNonSubTrafficSubProf specifies the
subscriber profile applicable on this SAP for all
non-subscriber traffic.

The value of this object is only meaningful if
sapSubMgmtSubscriberLimit…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.8
sapSubMgmtNonSubTrafficSlaProf
The value of sapSubMgmtNonSubTrafficSlaProf specifies the
SLA profile applicable on this SAP for all non-subscriber
traffic.

The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.9
sapSubMgmtMacDaHashing
The value of sapSubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG SAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id.

The val…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.10
sapSubMgmtDefSubIdent
The value of sapSubMgmtDefSubIdent specifies what is
used as the default subscriber identification applicable
on this SAP.

This value is used in case no other source (like Radius)
provides a subscriber id…
Enumerationr/w
Enumerated Values:
1useSapId
2useString
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.11
sapSubMgmtDefSubIdentString
The value of sapSubMgmtDefSubIdentString specifies the
default subscriber identification string applicable on
this SAP.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.12
sapSubMgmtDefAppProfile
The value of sapSubMgmtDefAppProfile specifies the default
application profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-BSX-MIB::tmnxBsxAppProfTable.
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.13
sapSubMgmtNonSubTrafficAppProf
The value of sapSubMgmtNonSubTrafficAppProf specifies the
application profile applicable on this SAP for all
non-subscriber traffic.

The value of this object is only meaningful if
sapSubMgmtSubscriberLimi…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.14

sapTlsMstiTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.24 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsMstiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsMstiTable' 
This table contains Multiple Spanning Tree Instance
information for the SAP. Each management VPLS running
MSTP can have upto 15 MSTI. An entry in this table is
automatically created when a tlsMstiEntry is created.
sapTlsMstiEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.24.1
Information about a specific MSTI for a SAP.
Indexes
Column Syntax OID
sapTlsMstiPriority
The value of the object sapTlsMstiPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP and MSTI. As only the most
signi…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.1
sapTlsMstiPathCost
The value of the object sapTlsMstiPathCost specifies the
contribution of this port to the MSTI path cost of paths
towards the spanning tree regional root which include this
port.
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.2
sapTlsMstiLastMgmtChange
The value of the object sapTlsMstiLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this SAP MSTI information.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.3
sapTlsMstiPortRole
sapTlsMstiPortRole indicates the current role of the
sap in the MSTI as defined by the Spanning Tree Protocol.
ALCATEL-ENT1-TIMETRA-SERV-MIBStpPortRole
Type Values:
0master
1root
2designated
3alternate
4backup
5disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.4
sapTlsMstiPortState
The value of the object sapTlsMstiPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge…
ALCATEL-ENT1-TIMETRA-SERV-MIBTStpPortState
Type Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.5
sapTlsMstiDesignatedBridge
The value of the object sapTlsMstiDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment for this MSTI.
ALCATEL-ENT1-TIMETRA-SERV-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.6
sapTlsMstiDesignatedPort
The value of the object sapTlsMstiDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment for this MSTI.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.7

sapIpipeInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.25 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIpipeInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIpipeInfoTable' 
A table that contains IPIPE specific SAP information.
sapIpipeInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.25.1
IPIPE specific information about a SAP.
Indexes
Column Syntax OID
sapIpipeCeInetAddressType
The value of the object sapIpipeCeInetAddressType
specifies the addresstype of the local end host IP
of an IPIPE.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.1
sapIpipeCeInetAddress
The type of this address is determined by the value of
the sapIpipeCeInetAddressType object.

This object specifies the IPv4 address of the
local end host of an IPIPE.
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.2
sapIpipeMacRefreshInterval
The value of sapIpipeMacRefreshInterval specifies the interval
between successive attempts to refresh the MAC address of the CE
device associated with an Ethernet ipipe SAP. If no other event
(such as reception of an AR…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.3
sapIpipeMacAddress
The value of the object sapIpipeMacAddress specifies
the MAC address of an IPIPE Ethernet SAP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.4
sapIpipeArpedMacAddress
The value of the object sapIpipeArpedMacAddress indicates
the MAC address of the local end host.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.5
sapIpipeArpedMacAddressTimeout
The value of the object sapIpipeArpedMacAddressTimeout
indicates the number of seconds to wait for the
sapIpipeArpedMacAddress to be re-refreshed.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.6

sapTodMonitorTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.26 · 1 row entry · 20 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTodMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTodMonitorTable' 
This table contains information on configurable objects
on SAP level, that can be modified by a scheduled policy.
sapTodMonitorEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.26.1
Information about ToD policy modifiable config data
for a SAP.
Indexes
Column Syntax OID
sapCurrentIngressIpFilterId
The value of the object sapCurrentIngressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the ingress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may devi…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.1
sapCurrentIngressIpv6FilterId
The value of the object sapCurrentIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.2
sapCurrentIngressMacFilterId
The value of the object sapCurrentIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter ma…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.3
sapCurrentIngressQosPolicyId
The value of the object sapCurrentIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter m…
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.4
sapCurrentIngressQosSchedPlcy
The value of the object sapCurrentIngressQosSchedPlcy
indicates the ingress QoS scheduler on this SAP, or zero
if none is currently active.
The active policy may deviate from
sapIngressQosSchedulerPolicy in case it is o…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.5
sapCurrentEgressIpFilterId
The value of the object sapCurrentEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may deviat…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.6
sapCurrentEgressIpv6FilterId
The value of the object sapCurrentEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter m…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.7
sapCurrentEgressMacFilterId
The value of the object sapCurrentEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter may …
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.8
sapCurrentEgressQosPolicyId
The value of the object sapCurrentEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter may …
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.9
sapCurrentEgressQosSchedPlcy
The value of the object sapCurrentEgressQosSchedPlcy
indicates the Egress QoS scheduler on this SAP, or zero if
none is currently active.
The active policy may deviate from
sapEgressQosSchedulerPolicy in case it is over…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.10
sapIntendedIngressIpFilterId
The value of the object sapIntendedIngressIpFilterId
indicates the index in the tIPFilterTable corresponding
to the ingress IP filter that should be applied on
this SAP.
If it deviates from sapCurrentIngressIpFilterId, …
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.11
sapIntendedIngressIpv6FilterId
The value of the object sapIntendedIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter that should be applied on this
SAP.
If it deviates from sapCurrentIngressIpv6F…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.12
sapIntendedIngressMacFilterId
The value of the object sapIntendedIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter that should be applied
on this SAP.
If it deviates from sapCurrentIngressMacFilte…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.13
sapIntendedIngressQosPolicyId
The value of the object sapIntendedIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos policy that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosPoli…
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.14
sapIntendedIngressQosSchedPlcy
The value of the object sapIntendedIngressQosSchedPlcy
indicates the ingress QoS scheduler that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosSchedPlcy, this
means that there was a problem when…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.15
sapIntendedEgressIpFilterId
The value of the object sapIntendedEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress IP filter scheduler that should be applied on
this SAP.
If it deviates from sapCurrentEgressIpFi…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.16
sapIntendedEgressIpv6FilterId
The value of the object sapIntendedEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress IPv6 filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgre…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17
sapIntendedEgressMacFilterId
The value of the object sapIntendedEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress mac filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgress…
ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.18
sapIntendedEgressQosPolicyId
The value of the object sapIntendedEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy that should be applied
on this SAP.
If it deviates from sapCurrentEgressQosPolicyId…
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19
sapIntendedEgressQosSchedPlcy
The value of the object sapIntendedEgressQosSchedPlcy
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Scheduler policy that should be applied
on this SAP.
If it deviates from sapCurrentEgres…
ALCATEL-ENT1-TIMETRA-SERV-MIBServObjName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.20

sapIngrQosPlcyStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.27 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngrQosPlcyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngrQosPlcyStatsTable' 
A table that contains Ingress Qos policy related
statistics for a SAP.
sapIngrQosPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.27.1
Statistics about a specific Ingress Qos Policy applied
on a specific SAP.
Indexes
Column Syntax OID
sapIgQosPlcyId
The value of the object sapIgQosPlcyId indicates
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.1
sapIgQosPlcyDroppedHiPrioPackets
The value of the object sapIgQosPlcyDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded,…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.2
sapIgQosPlcyDroppedHiPrioOctets
The value of the object sapIgQosPlcyDroppedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, e…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.3
sapIgQosPlcyDroppedLoPrioPackets
The value of the object sapIgQosPlcyDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.4
sapIgQosPlcyDroppedLoPrioOctets
The value of the object sapIgQosPlcyDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, et…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.5
sapIgQosPlcyForwardedInProfPackets
The value of the object sapIgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.6
sapIgQosPlcyForwardedInProfOctets
The value of the object sapIgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.7
sapIgQosPlcyForwardedOutProfPackets
The value of the object sapIgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.8
sapIgQosPlcyForwardedOutProfOctets
The value of the object sapIgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.9

sapEgrQosPlcyStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.28 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosPlcyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosPlcyStatsTable' 
A table that contains Egress Qos policy related
statistics for a SAP.
sapEgrQosPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.28.1
Statistics about a specific Egress Qos Policy applied
on a specific SAP.
Indexes
Column Syntax OID
sapEgQosPlcyId
The value of the object sapEgQosPlcyId indicates
the row index in the tSapEgressTable corresponding to this
egress QoS policy, or one if no policy is specified.
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.1
sapEgQosPlcyDroppedInProfPackets
The value of the object sapEgQosPlcyDroppedInProfPackets
indicates the number of in-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.2
sapEgQosPlcyDroppedInProfOctets
The value of the object sapEgQosPlcyDroppedInProfOctets
indicates the number of in-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.3
sapEgQosPlcyDroppedOutProfPackets
The value of the object sapEgQosPlcyDroppedOutProfPackets
indicates the number of out-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, e…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.4
sapEgQosPlcyDroppedOutProfOctets
The value of the object sapEgQosPlcyDroppedOutProfOctets
indicates the number of out-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.5
sapEgQosPlcyForwardedInProfPackets
The value of the object sapEgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.6
sapEgQosPlcyForwardedInProfOctets
The value of the object sapEgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.7
sapEgQosPlcyForwardedOutProfPackets
The value of the object sapEgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.8
sapEgQosPlcyForwardedOutProfOctets
The value of the object sapEgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.9

sapIngQosPlcyQueueStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.29 · 1 row entry · 17 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngQosPlcyQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngQosPlcyQueueStatsTable' 
A table that contains ingress QoS queue SAP
statistics, per Ingress QoS Policy the queue
was used by.
sapIngQosPlcyQueueStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.29.1
Ingress statistics about a specific SAP's
QoS queue for a given Qos policy.
Indexes
Column Syntax OID
sapIgQosPlcyQueuePlcyId
The value of the object sapIgQosPlcyQueuePlcyId indicates
the row index in the tSapIngressTable corresponding to
this ingress QoS policy.
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.1
sapIgQosPlcyQueueId
The index of the ingress QoS queue of this SAP used by the
policy indicated by sapIgQosPlcyQueuePlcyId.
ALCATEL-ENT1-TIMETRA-SERV-MIBTSapIngQueueId
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.2
sapIgQosPlcyQueueStatsOfferedHiPrioPackets
The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.3
sapIgQosPlcyQueueStatsDroppedHiPrioPackets
The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.4
sapIgQosPlcyQueueStatsOfferedLoPrioPackets
The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.5
sapIgQosPlcyQueueStatsDroppedLoPrioPackets
The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, e…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.6
sapIgQosPlcyQueueStatsOfferedHiPrioOctets
The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.7
sapIgQosPlcyQueueStatsDroppedHiPrioOctets
The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets
indicates the number ofhigh priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.8
sapIgQosPlcyQueueStatsOfferedLoPrioOctets
The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.9
sapIgQosPlcyQueueStatsDroppedLoPrioOctets
The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.10
sapIgQosPlcyQueueStatsForwardedInProfPackets
The value of sapIgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.11
sapIgQosPlcyQueueStatsForwardedOutProfPackets
The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.12
sapIgQosPlcyQueueStatsForwardedInProfOctets
The value of sapIgQosPlcyQueueStatsForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.13
sapIgQosPlcyQueueStatsForwardedOutProfOctets
The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.14
sapIgQosPlcyQueueCustId
The value of the object sapIgQosPlcyQueueCustId
indicates the Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.15
sapIgQosPlcyQueueStatsUncoloredPacketsOffered
The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered
indicates the number of uncolored packets offered to
the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.16
sapIgQosPlcyQueueStatsUncoloredOctetsOffered
The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered
indicates the number of uncolored octets offered to
the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.17

sapEgrQosPlcyQueueStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.30 · 1 row entry · 11 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrQosPlcyQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrQosPlcyQueueStatsTable' 
A table that contains egress QoS queue SAP
statistics per Egress QoS Policy the queue
was used by.
sapEgrQosPlcyQueueStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.30.1
Egress statistics about a specific SAP's
QoS queue for a given Qos policy.
Indexes
Column Syntax OID
sapEgQosPlcyQueuePlcyId
The row index in the tSapEgressTable
corresponding to this egress QoS policy.
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.1
sapEgQosPlcyQueueId
The value of sapEgQosPlcyQueueId indicates
index of the egress QoS queue of this SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBTSapEgrQueueId
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.2
sapEgQosPlcyQueueStatsForwardedInProfPackets
The value of sapEgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets (rate below
CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.3
sapEgQosPlcyQueueStatsDroppedInProfPackets
The value of sapEgQosPlcyQueueStatsDroppedInProfPackets
indicates the number of in-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.4
sapEgQosPlcyQueueStatsForwardedOutProfPackets
The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets (rate
above CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.5
sapEgQosPlcyQueueStatsDroppedOutProfPackets
The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets
indicates the number out-of-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.6
sapEgQosPlcyQueueStatsForwardedInProfOctets
The value of sapEgQosPlcyQueueStatsForwardedInProfOctets
indicates the number ofin-profile octets (rate below CIR)
forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.7
sapEgQosPlcyQueueStatsDroppedInProfOctets
The value of sapEgQosPlcyQueueStatsDroppedInProfOctets
indicates the number in-profile octets discarded by the
egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.8
sapEgQosPlcyQueueStatsForwardedOutProfOctets
The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets (rate
above CIR) forwarded by the egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.9
sapEgQosPlcyQueueStatsDroppedOutProfOctets
The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets
indicates the number out-of-profile octets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.10
sapEgQosPlcyQueueCustId
The value of the object sapEgQosPlcyQueueCustId indicates
the Customer ID for the associated service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.11

sapDhcpInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.31 · 1 row entry · 1 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapDhcpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapDhcpInfoTable' 
sapDhcpInfoTable contains DHCP information related to a
routed CO subscriber SAP.  This table complements
sapBaseInfoTable, and contains an entry for each
routed CO subscriber SAP. Rows in this table
are created and deleted automatically by the system.
sapDhcpInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.31.1
DHCP specific information for a routed CO subscriber SAP.
Indexes
Column Syntax OID
sapDhcpOperLeasePopulate
The value of the object sapDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.31.1.1

sapIngSchedPlcyStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.32 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngSchedPlcyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngSchedPlcyStatsTable' 
A table that contains ingress QoS queue
statistics for the SAP's, organized by
scheduler policy.
sapIngSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.32.1
Statistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Indexes
Column Syntax OID
sapIngSchedPlcyStatsFwdPkt
The number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.32.1.1
sapIngSchedPlcyStatsFwdOct
The number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.32.1.2

sapEgrSchedPlcyStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.33 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrSchedPlcyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrSchedPlcyStatsTable' 
A table that contains egress QoS scheduler 
statistics for the SAP's, organized by
scheduler policy.
sapEgrSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.33.1
Statistics about a specific SAP's egress QoS scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Indexes
Column Syntax OID
sapEgrSchedPlcyStatsFwdPkt
The number of packets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.33.1.1
sapEgrSchedPlcyStatsFwdOct
The number of octets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.33.1.2

sapIngSchedPlcyPortStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.34 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapIngSchedPlcyPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapIngSchedPlcyPortStatsTable' 
The sapIngSchedPlcyPortStatsTable contains 
ingress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is  a CCAG or LAG in 'link' mode, or an APS. 
Entries are created when a scheduler policy of a SAP 
is replaced with another one due to Time-Of-Day policies.
sapIngSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.34.1
Statistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Indexes
Column Syntax OID
sapIngSchedPlcyPortStatsPort
The value of sapIngSchedPlcyPortStatsPort is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the sched…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.1
sapIngSchedPlcyPortStatsFwdPkt
The value of sapIngSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.2
sapIngSchedPlcyPortStatsFwdOct
The value of sapIngSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.3

sapEgrSchedPlcyPortStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.35 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEgrSchedPlcyPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEgrSchedPlcyPortStatsTable' 
The sapEgrSchedPlcyPortStatsTable contains 
egress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is  a CCAG or LAG in 'link' mode, or an APS. 
Entries are created when a scheduler policy of a SAP 
is replaced with another one due to Time-Of-Day policies.
sapEgrSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.35.1
Statistics about a specific SAP's egress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Indexes
Column Syntax OID
sapEgrSchedPlcyPortStatsPort
The value of sapEgrSchedPlcyPortStatsPort is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the schedu…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.1
sapEgrSchedPlcyPortStatsFwdPkt
The value of sapEgrSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.2
sapEgrSchedPlcyPortStatsFwdOct
The value of sapEgrSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.3

sapCemInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.40 · 1 row entry · 14 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapCemInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapCemInfoTable' 
A table that contains CEM SAP information.
sapCemInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.40.1
Information about a specific CEM SAP.
Indexes
Column Syntax OID
sapCemLastMgmtChange
The value of the object sapCemLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this CEM SAP information.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.1
sapCemEndpointType
This object indicates the CEM SAP endpoint type.
Enumeration
Enumerated Values:
1unstructuredE1
2unstructuredT1
3unstructuredE3
4unstructuredT3
5nxDS0
6nxDS0WithCas
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.2
sapCemBitrate
This object indicates the bit-rate in multiples of
64 Kbit/s of the CEM SAP.
64 Kbits/sUnsigned32
Constraints:
range: 0-699
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.3
sapCemCasTrunkFraming
This object indicates the CAS trunk framing mode of
the CEM SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBTdmOptionsCasTrunkFraming
Type Values:
0noCas
1e1Trunk
2t1EsfTrunk
3t1SfTrunk
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.4
sapCemPayloadSize
This object specifies the payload size (in bytes) of
packets transmitted to the Packet Service Network (PSN)
by the CEM SAP. This determines the size of the data
that will be transmitted over the service. As well,
if …
bytesUnsigned32r/w
Constraints:
range: 0-0
range: 16-2048
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
sapCemJitterBuffer
This object specifies the jitter buffer size in
milliseconds (ms).

Default value depends on the CEM SAP endpoint type
(sapCemEndpointType), and if applicable, the number of
timeslots (sapCemBitrate):
----…
millisecondsUnsigned32r/w
Constraints:
range: 0-250
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.6
sapCemUseRtpHeader
This object specifies whether a RTP header is used when
packets are transmitted to the Packet Service Network
(PSN) by the CEM SAP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.7
sapCemDifferential
This object specifies whether this CEM SAP is in
differential mode.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.8
sapCemTimestampFreq
This object specifies whether the value of the timestamp
frequency in multiples of 8 KHz for this CEM SAP.
8 KHzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.9
sapCemReportAlarm
The value of sapCemReportAlarm determines when and if to
generate notifications for the CEM SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBCemSapReportAlarmr/w
Type Values:
0notUsed
1strayPkts
2malformedPkts
3pktLoss
4bfrOverrun
5bfrUnderrun
6rmtPktLoss
7rmtFault
8rmtRdi
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.10
sapCemReportAlarmStatus
The value of sapCemReportAlarmStatus indicates the current
alarms on this CEM SAP.
ALCATEL-ENT1-TIMETRA-SERV-MIBCemSapReportAlarm
Type Values:
0notUsed
1strayPkts
2malformedPkts
3pktLoss
4bfrOverrun
5bfrUnderrun
6rmtPktLoss
7rmtFault
8rmtRdi
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.11
sapCemLocalEcid
The value of the object sapCemLocalEcid specifies
the local ECID.

Only valid if CEM SAP belongs to an EPIPE service.
ALCATEL-ENT1-TIMETRA-SERV-MIBCemSapEcidr/w
Type Constraints:
range: 0..1048575
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.12
sapCemRemoteMacAddr
The value of the object sapCemRemoteMacAddr specifies
the remote MAC address.

Only valid if CEM SAP belongs to an EPIPE service.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.13
sapCemRemoteEcid
The value of the object sapCemRemoteEcid specifies
the remote ECID.

Only valid if CEM SAP belongs to an EPIPE service.
ALCATEL-ENT1-TIMETRA-SERV-MIBCemSapEcidr/w
Type Constraints:
range: 0..1048575
 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.14

sapCemStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.41 · 1 row entry · 18 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapCemStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapCemStatsTable' 
A table that contains CEM SAP statistics.
sapCemStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.41.1
Statistics for a specific CEM SAP.
Indexes
Column Syntax OID
sapCemStatsIngressForwardedPkts
The value of sapCemStatsIngressForwardedPkts indicates
the number of packets that were successfully forwarded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.1
sapCemStatsIngressDroppedPkts
The value of sapCemStatsIngressDroppedPkts indicates
the total number of packets that were dropped due to
errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.2
sapCemStatsEgressForwardedPkts
The value of sapCemStatsEgressForwardedPkts indicates the
number of packets that were successfully forwarded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.3
sapCemStatsEgressDroppedPkts
The value of sapCemStatsEgressDroppedPkts indicates
the total number of packets that were dropped due to
errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.4
sapCemStatsEgressMissingPkts
The value of sapCemStatsEgressMissingPkts indicates the
number of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.5
sapCemStatsEgressPktsReOrder
The value of sapCemStatsEgressPktsReOrder indicates the
number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.6
sapCemStatsEgressJtrBfrUnderruns
The value of sapCemStatsEgressJtrBfrUnderruns indicates
the number of times a packet needed to be played out and
the jitter buffer was empty.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.7
sapCemStatsEgressJtrBfrOverruns
The value of sapCemStatsEgressJtrBfrOverruns indicates
the number of times a packet was dropped because it could
not fit in the jitter buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.8
sapCemStatsEgressMisOrderDropped
The value of sapCemStatsEgressMisOrderDropped indicates
the number of packets detected out of order (via control
word sequence numbers), and could not be re-ordered, or
could not be placed in the jitter buffer because i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.9
sapCemStatsEgressMalformedPkts
The value of sapCemStatsEgressMalformedPkts indicates the
number of packets detected with unexpected size, or bad
headers' stack.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.10
sapCemStatsEgressLBitDropped
The value of sapCemStatsEgressLBitDropped indicates the
number of packets dropped due to the L bit set by the far
end.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.11
sapCemStatsEgressMultipleDropped
The value of sapCemStatsEgressMultipleDropped indicates
the number of packets dropped due to multiple sequence
numbers.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.12
sapCemStatsEgressESs
The value of sapCemStatsEgressESs indicates the number of
Error Seconds (ESs) encountered. Any malformed packet,
seq. error, LOPS and similar are considered as error
seconds.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.13
sapCemStatsEgressSESs
The value of sapCemStatsEgressSESs indicates the number
of Severely Error Seconds (SESs) encountered. This is
when more than 30 percent of the packets within a one
second window are missing.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.14
sapCemStatsEgressUASs
The value of sapCemStatsEgressUASs indicates the number of
Unavailable Seconds (UASs) encountered. Any consecutive
ten seconds of SESs are counted as one UAS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.15
sapCemStatsEgressFailureCounts
The value of sapCemStatsEgressFailureCounts indicates
the number failure events. A failure event begins when
the LOPS failure is declared, and ends when the failure
is cleared.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.16
sapCemStatsEgressUnderrunCounts
The value of sapCemStatsEgressUnderrunCounts indicates
the number of times the jitter buffer went into an
underrun state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.17
sapCemStatsEgressOverrunCounts
The value of sapCemStatsEgressOverrunCounts indicates
the number of times the jitter buffer went into an
overrun state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.18

sapTlsL2ptStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.42 · 1 row entry · 51 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsL2ptStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsL2ptStatsTable' 
A table that contains SAP Layer 2 Protocol Tunneling 
Statistics.
This table complements sapTlsInfoTable. Rows in this
table are created and deleted automatically by the
system.
sapTlsL2ptStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.42.1
Layer 2 Protocol Tunneling Statistics for a specific SAP.
The statistics are provided for each combination of
Destination Address and LLC SNAP type.
Indexes
Column Syntax OID
sapTlsL2ptStatsLastClearedTime
The value of sapTlsL2ptStatsLastClearedTime indicates
the last time that these stats were cleared. The value
zero indicates that they have not been cleared yet.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.1
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
number of L2PT encapsulated STP config bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.2
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
number of L2PT encapsulated STP config bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.3
sapTlsL2ptStatsL2ptEncapStpRstBpdusRx
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
number of L2PT encapsulated STP rst bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.4
sapTlsL2ptStatsL2ptEncapStpRstBpdusTx
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
number of L2PT encapsulated STP rst bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.5
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
number of L2PT encapsulated STP tcn bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.6
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
number of L2PT encapsulated STP tcn bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.7
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
number of L2PT encapsulated PVST config bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.8
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
number of L2PT encapsulated PVST config bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.9
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
number of L2PT encapsulated PVST rst bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.10
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
number of L2PT encapsulated PVST rst bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.11
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
number of L2PT encapsulated PVST tcn bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.12
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.13
sapTlsL2ptStatsStpConfigBpdusRx
The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the
number of STP config bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.14
sapTlsL2ptStatsStpConfigBpdusTx
The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the
number of STP config bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.15
sapTlsL2ptStatsStpRstBpdusRx
The value of sapTlsL2ptStatsStpRstBpdusRx indicates the
number of STP rst bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.16
sapTlsL2ptStatsStpRstBpdusTx
The value of sapTlsL2ptStatsStpRstBpdusTx indicates the
number of STP rst bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.17
sapTlsL2ptStatsStpTcnBpdusRx
The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the
number of STP tcn bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.18
sapTlsL2ptStatsStpTcnBpdusTx
The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the
number of STP tcn bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.19
sapTlsL2ptStatsPvstConfigBpdusRx
The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the
number of PVST config bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.20
sapTlsL2ptStatsPvstConfigBpdusTx
The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the
number of PVST config bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.21
sapTlsL2ptStatsPvstRstBpdusRx
The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the
number of PVST rst bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.22
sapTlsL2ptStatsPvstRstBpdusTx
The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the
number of PVST rst bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.23
sapTlsL2ptStatsPvstTcnBpdusRx
The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the
number of PVST tcn bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.24
sapTlsL2ptStatsPvstTcnBpdusTx
The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the
number of PVST tcn bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.25
sapTlsL2ptStatsOtherBpdusRx
The value of sapTlsL2ptStatsOtherBpdusRx indicates the
number of other bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.26
sapTlsL2ptStatsOtherBpdusTx
The value of sapTlsL2ptStatsOtherBpdusTx indicates the
number of other bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.27
sapTlsL2ptStatsOtherL2ptBpdusRx
The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the
number of other L2PT bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.28
sapTlsL2ptStatsOtherL2ptBpdusTx
The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the
number of other L2PT bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.29
sapTlsL2ptStatsOtherInvalidBpdusRx
The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the
number of other invalid bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.30
sapTlsL2ptStatsOtherInvalidBpdusTx
The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the
number of other invalid bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.31
sapTlsL2ptStatsL2ptEncapCdpBpdusRx
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
number of L2PT encapsulated CDP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.32
sapTlsL2ptStatsL2ptEncapCdpBpdusTx
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
number of L2PT encapsulated CDP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.33
sapTlsL2ptStatsL2ptEncapVtpBpdusRx
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
number of L2PT encapsulated VTP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.34
sapTlsL2ptStatsL2ptEncapVtpBpdusTx
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
number of L2PT encapsulated VTP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.35
sapTlsL2ptStatsL2ptEncapDtpBpdusRx
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
number of L2PT encapsulated DTP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.36
sapTlsL2ptStatsL2ptEncapDtpBpdusTx
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
number of L2PT encapsulated DTP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.37
sapTlsL2ptStatsL2ptEncapPagpBpdusRx
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
number of L2PT encapsulated PAGP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.38
sapTlsL2ptStatsL2ptEncapPagpBpdusTx
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
number of L2PT encapsulated PAGP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.39
sapTlsL2ptStatsL2ptEncapUdldBpdusRx
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
number of L2PT encapsulated UDLD bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.40
sapTlsL2ptStatsL2ptEncapUdldBpdusTx
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
number of L2PT encapsulated UDLD bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.41
sapTlsL2ptStatsCdpBpdusRx
The value of sapTlsL2ptStatsCdpBpdusRx indicates the
number of CDP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.42
sapTlsL2ptStatsCdpBpdusTx
The value of sapTlsL2ptStatsCdpBpdusTx indicates the
number of CDP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.43
sapTlsL2ptStatsVtpBpdusRx
The value of sapTlsL2ptStatsVtpBpdusRx indicates the
number of VTP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.44
sapTlsL2ptStatsVtpBpdusTx
The value of sapTlsL2ptStatsVtpBpdusTx indicates the
number of VTP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.45
sapTlsL2ptStatsDtpBpdusRx
The value of sapTlsL2ptStatsDtpBpdusRx indicates the
number of DTP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.46
sapTlsL2ptStatsDtpBpdusTx
The value of sapTlsL2ptStatsDtpBpdusTx indicates the
number of DTP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.47
sapTlsL2ptStatsPagpBpdusRx
The value of sapTlsL2ptStatsPagpBpdusRx indicates the
number of PAGP bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.48
sapTlsL2ptStatsPagpBpdusTx
The value of sapTlsL2ptStatsPagpBpdusTx indicates the
number of PAGP bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.49
sapTlsL2ptStatsUdldBpdusRx
The value of sapTlsL2ptStatsUdldBpdusRx indicates the
number of UDLD bpdus received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.50
sapTlsL2ptStatsUdldBpdusTx
The value of sapTlsL2ptStatsUdldBpdusTx indicates the
number of UDLD bpdus transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.51

sapEthernetInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.43 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapEthernetInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapEthernetInfoTable' 
A table that contains Ethernet SAP information.
sapEthernetInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.43.1
Information about a specific Ethernet SAP.
Indexes
Column Syntax OID
sapEthernetLLFAdminStatus
sapEthernetLLFAdminStatus specifies whether or not Link-
Loss Forwarding is enabled ('up'). When this object is set
to 'up' the underlying port will be forced into the
operationally 'down' state if the service is operat…
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.6527.3.1.2.4.3.43.1.1
sapEthernetLLFOperStatus
sapEthernetLLFOperStatus indicates whether or not the
underlying port is forced operationally 'down' due to the
service being operationally 'down' or an
sdpBindPwPeerStatusBits bit is set.
sapEthernetLLFOperStatus is s…
Enumeration
Enumerated Values:
1fault
2clear
 .1.3.6.1.4.1.6527.3.1.2.4.3.43.1.2

msapPlcyTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.44 · 1 row entry · 19 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapPlcyTable' 
The msapPlcyTable has an entry for each managed SAP(MSAP) policy
configured in the system.
msapPlcyEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.44.1
Each entry represents the configuration for a managed SAP(MSAP) policy.

The values for each entry will be used to populate the following
tables when the MSAP policy is applied to a MSAP:

ALCATE…
Indexes
Column Syntax OID
msapPlcyName
The value of msapPlcyName specifies the name of the MSAP policy.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.1
msapPlcyRowStatus
The value of msapPlcyRowStatus is used for the creation
and deletion of MSAP policies.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.2
msapPlcyLastChanged
The value of msapPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.

If no changes were made to the entry since the last
re-initialization of the local network mana…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.3
msapPlcyDescription
The value of msapPlcyDescription specifies the description
of the MSAP policy.
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.4
msapPlcyCpmProtPolicyId
The value of msapPlcyCpmProtPolicyId specifies a CPM Protection
policy for the MSAP policy.

If a corresponding policy is not defined in
TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue'
e…
ALCATEL-ENT1-TIMETRA-TC-MIBTCpmProtPolicyIDr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.5
msapPlcyCpmProtMonitorMac
The value of msapPlcyCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy,
as specified by msapPlcyCpmProtPolicyId, must be applied.

If the value of msapPlcy…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.6
msapPlcySubMgmtDefSubId
The value of msapPlcySubMgmtDefSubId specifies what will be used as
the default subscriber identification applicable on the MSAP.

This value is used in case no other source (like Radius) provides a
subsc…
Enumerationr/w
Enumerated Values:
1useSapId
2useString
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.7
msapPlcySubMgmtDefSubIdStr
The value of msapPlcySubMgmtDefSubIdStr specifies the default
subscriber identification string applicable on this MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.8
msapPlcySubMgmtDefSubProfile
The value of msapPlcySubMgmtDefSubProfile specifies the default
subscriber profile applicable on the MSAP.

If a corresponding profile is not defined in tmnxSubProfileTable, an
'inconsistentValue' error w…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.9
msapPlcySubMgmtDefSlaProfile
The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA
profile applicable on the MSAP.

If a corresponding profile is not defined in tmnxSLAProfileTable, an
'inconsistentValue' error will be…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.10
msapPlcySubMgmtDefAppProfile
The value of msapPlcySubMgmtDefAppProfile specifies the default
application profile applicable on the MSAP.

If a corresponding profile is not defined in
TIMETRA-BSX-MIB::tmnxBsxAppProfTable, an 'inconsis…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.11
msapPlcySubMgmtSubIdPlcy
The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber
identification policy applicable on the MSAP.

If a corresponding profile is not defined in tmnxSubIdentPolicyTable,
an 'inconsistentValue' e…
ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.12
msapPlcySubMgmtSubscriberLimit
The value of msapPlcySubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for the MSAP.

A value is 0 means there is no limit.

The values for the objects msapPlcySubMgm…
Unsigned32r/w
Constraints:
range: 0-8000
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.13
msapPlcySubMgmtProfiledTrafOnly
The value of msapPlcySubMgmtProfiledTrafOnly specifies
whether only profiled traffic is applicable for the MSAP.
If set to 'true', the MSAP queues will be deleted.

The value of this object is only meaning…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.14
msapPlcySubMgmtNonSubTrafSubId
The value of msapPlcySubMgmtNonSubTrafSubId specifies the
subscriber identification applicable on the MSAP for all
non-subscriber traffic.

The value of this object is only meaningful if
msapPlcySubMgmtSub…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.15
msapPlcySubMgmtNonSubTrafSubProf
The value of msapPlcySubMgmtNonSubTrafSubProf specifies the
subscriber profile applicable on the MSAP for all
non-subscriber traffic.

The value of this object is only meaningful if
msapPlcySubMgmtSubscrib…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.16
msapPlcySubMgmtNonSubTrafSlaProf
The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the
SLA profile applicable on the MSAP for all non-subscriber
traffic.

The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.17
msapPlcySubMgmtNonSubTrafAppProf
The value of msapPlcySubMgmtNonSubTrafAppProf specifies the
Application profile applicable on the MSAP for all
non-subscriber traffic.

The value of this object is only meaningful if
msapPlcySubMgmtSubscr…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.18
msapPlcyAssociatedMsaps
The value of msapPlcyAssociatedMsaps indicates the
number of MSAPs associated with this MSAP policy.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.19

msapTlsPlcyTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.45 · 1 row entry · 30 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapTlsPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapTlsPlcyTable' 
The msapTlsPlcyTable has an entry for each managed SAP (MSAP)
policy configured in the system.
msapTlsPlcyEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.45.1
Each entry represents the VPLS-related configuration for a managed
SAP (MSAP) policy.

The values for each entry will be used to populate the following
VPLS-related tables when the MSAP policy is applied to …
Indexes
No indexes recorded
Column Syntax OID
msapTlsPlcyLastChanged
The value of msapTlsPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.

If no changes were made to the entry since the last
re-initialization of the local network m…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1
msapTlsPlcySplitHorizonGrp
The value of msapTlsPlcySplitHorizonGrp specifies the name of the
split-horizon group for the MSAP.

If the name specified does not correspond to a tlsShgInfoEntry
for the VPLS service, the creation of th…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2
msapTlsPlcyArpReplyAgent
The value of msapTlsPlcyArpReplyAgent specifies the status of the special
ARP response mechanism in the system for ARP requests destined to
static or dynamic hosts associated with the MSAP.

'disabled' …
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3enabledWithSubscrIdent
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3
msapTlsPlcySubMgmtMacDaHashing
The value of msapTlsPlcySubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG MSAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4
msapTlsPlcyDhcpLeasePopulate
The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of
DHCP lease states allowed on the MSAP.
Unsigned32r/w
Constraints:
range: 0-8000
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5
msapTlsPlcyDhcpPrxyAdminState
The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired
administrative state of the proxy server on the interface.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6
msapTlsPlcyDhcpPrxyServAddrType
The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type
of msapTlsPlcyDhcpPrxyServAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7
msapTlsPlcyDhcpPrxyServAddr
The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the
which will be used as the source address of the emulated DHCP server
in the context of the VPLS MSAP.

This address is …
OctetStringr/w
Constraints:
range: 16-16
range: 0-0
range: 4-4
range: 20-20
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8
msapTlsPlcyDhcpPrxyLeaseTime
The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long
a DHCP client is allowed to use the offered IP address.

A value of 0 means the lease time provided by a RADIUS or an up…
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 300-315446399
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9
msapTlsPlcyDhcpPrxyLTRadOverride
The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the
lease time provided by the RADIUS server is presented to the DHCP
client.

By default the proxy-server will always make use of
m…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10
msapTlsPlcyDhcpInfoAction
The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option
reforwarding policy:

'replace' - replace existing information with configured
information
'drop' - discard messages with…
Enumerationr/w
Enumerated Values:
1replace
2drop
3keep
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11
msapTlsPlcyDhcpCircuitId
The value of msapTlsPlcyDhcpCircuitId specifies whether or not the
circuit-id suboption is present, and if it is present what
information goes in it:

none - the circuit-id suboption will not be…
Enumerationr/w
Enumerated Values:
0none
1asciiTuple
2vlanAsciiTuple
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12
msapTlsPlcyDhcpRemoteId
The value of msapTlsPlcyDhcpRemoteId specifies what information goes into
the remote-id suboption in the DHCP Relay packet.

If the value of this object is set to 'none', the remote-id suboption
will not b…
Enumerationr/w
Enumerated Values:
1none
2mac
3remote-id
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13
msapTlsPlcyDhcpRemoteIdString
The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The
value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have
the value of 'remote-id'.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14
msapTlsPlcyDhcpVendorInclOpts
The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the
Alcatel-Lucent vendor specific sub-option of option 82.

The value of this object is only used when msapTlsPlcyDhcpInfoAction is
…
Bitsr/w
Enumerated Values:
0systemId
1clientMac
2serviceId
3sapId
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15
msapTlsPlcyDhcpVendorOptStr
The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes
into the Alcatel-Lucent vendor specific sub-option of option 82.

This string is only used when msapTlsPlcyDhcpInfoAction is set to
'…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16
msapTlsPlcyEgressMcastGroup
The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast
Group for the MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17
msapTlsPlcyIgmpSnpgImportPlcy
The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement
that is be applied to all incoming IGMP messages on the MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18
msapTlsPlcyIgmpSnpgFastLeave
The value of msapTlsPlcyIgmpSnpgFastLeave specifies
whether fast leave is allowed on this MSAP.

If set to 'enabled', the system prunes the port on which an IGMP
'leave' message has been received without w…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19
msapTlsPlcyIgmpSnpgSendQueries
The value of msapTlsPlcyIgmpSnpgSendQueries specifies
whether the system generates General Queries by itself on
the MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20
msapTlsPlcyIgmpSnpgGenQueryIntv
The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies
the interval (in seconds) between two consecutive general queries sent
by the system on the MSAP.

The value of this object is only meaningful when th…
secondsUnsigned32r/w
Constraints:
range: 2-1024
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21
msapTlsPlcyIgmpSnpgQueryRespIntv
The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies
the maximum response time (in seconds) advertised in IGMPv2/v3
queries.

The value of this object is only meaningful when the value of
msapTlsPlcyIgm…
secondsUnsigned32r/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22
msapTlsPlcyIgmpSnpgRobustCount
The value of msapTlsPlcyIgmpSnpgRobustCount specifies
the robustness variable on the MSAP.

This object allows tuning for the expected packet loss on the MSAP.
If a MSAP is expected to be lossy, the Robust…
Unsigned32r/w
Constraints:
range: 2-7
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23
msapTlsPlcyIgmpSnpgLastMembIntvl
The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the
Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent in response
to 'leave' messages. This is also the amou…
deci-secondsUnsigned32r/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24
msapTlsPlcyIgmpSnpgMaxNbrGrps
The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group
addresses are allowed for the MSAP.

The value 0 means that no limit is imposed.
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25
msapTlsPlcyIgmpSnpgMvrFromVplsId
The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which
VPLS the multicast streams corresponding to the groups learned
via the MSAP are copied.

Groups which cannot be joined to the correspondin…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServIdr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26
msapTlsPlcyIgmpSnpgVersion
The value of msapTlsPlcyIgmpSnpgVersion specifies the version
of IGMP running on the MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxIgmpVersionr/w
Type Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27
msapTlsPlcyIgmpSnpgMcacPlcyName
The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name
of the multicast CAC (Connection Admission Control) policy.
ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28
msapTlsPlcyIgmpSnpgMcacUncnstBW
The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilo-bits per
second(kbps).

If the default value of '-1' is set, there is no …
kbpsInteger32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29
msapTlsPlcyIgmpSnpgMcacPrRsvMnBW
The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).

If the value of msapTlsPlcyIgmpS…
kbpsInteger32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30

msapIgmpSnpgMcacLevelTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.46 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapIgmpSnpgMcacLevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapIgmpSnpgMcacLevelTable' 
The msapIgmpSnpgMcacLevelTable has an entry for each
multicast CAC policy constraint level configured for
a Managed SAP policy.
msapIgmpSnpgMcacLevelEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.46.1
Each row entry represents a multicast CAC policy
bundle level constraints for a particular Managed
SAP policy. Entries are created and deleted by
the user.
Indexes
Column Syntax OID
msapIgmpSnpgMcacLevelId
The value of msapIgmpSnpgMcacLevelId indicates
the level id of the multicast CAC policy bundle
constraint.

The value of level 1 has the highest priority and
level 8 the lowest.
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.1
msapIgmpSnpgMcacLevelRowStatus
The value of msapIgmpSnpgMcacLevelRowStatus is
used for creation and deletion of level constraint
in a CAC for a Managed SAP policy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.2
msapIgmpSnpgMcacLevelLastChanged
The value of msapIgmpSnpgMcacLevelLastChanged indicates
the sysUpTime at the time of the last modification
of this entry.

If no changes were made to the entry since the last
re-initialization of the local…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.3
msapIgmpSnpgMcacLevelBW
The value of msapIgmpSnpgMcacLevelBW specifies
the bandwidth in kilo-bits per second (kbps) for
the level.
kbpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.4

msapIgmpSnpgMcacLagTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.47 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapIgmpSnpgMcacLagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapIgmpSnpgMcacLagTable' 
The msapIgmpSnpgMcacLagTable has an entry for each lag
port configured for a multicast CAC policy bundle configured
for a Managed SAP policy.
msapIgmpSnpgMcacLagEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.47.1
Each row entry represents a particular multicast CAC lag port
constraints for a Managed SAP policy.. Entries are
created and deleted by the user.
Indexes
Column Syntax OID
msapIgmpSnpgMcacLagPortsDown
The value of msapIgmpSnpgMcacLagPortsDown indicates
the configured number of ports in a lag group that are down.

If the number of ports available in the lag is reduced by the
number of ports configured …
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.1
msapIgmpSnpgMcacLagRowStatus
The value of msapIgmpSnpgMcacLagRowStatus is used for
creation and deletion of lag constraint in a CAC policy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.2
msapIgmpSnpgMcacLagLastChanged
The value of msapIgmpSnpgMcacLagLastChanged indicates the
sysUpTime at the time of the last modification of this entry.

If no changes were made to the entry since the last
re-initialization of the local …
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.3
msapIgmpSnpgMcacLagLevel
The value of msapIgmpSnpgMcacLagLevel specifies the level
id to use when the value of msapIgmpSnpgMcacLagPortsDown
matches the actual number of ports down in a lag.

Using the value of msapIgmpSnpgMcacLagL…
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.4

msapInfoTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.48 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapInfoTable' 
A table that contains Managed SAP information.
msapInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.48.1
Information about a specific Managed SAP.
Indexes
Column Syntax OID
msapInfoCreationSapPortEncapVal
The value of msapInfoCreationSapPortEncapVal indicates
the port encapsulation value of the SAP with a sapSubType
value of 'capture' that created this MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.1
msapInfoCreationPlcyName
The value of msapInfoCreationPlcyName indicates
the value of the msapPlcyName object for MSAP policy
used to create this MSAP.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.2
msapInfoReEvalPolicy
The value of msapInfoReEvalPolicy specifies whether
to re-apply the Managed SAP policy associated with
this MSAP.

When a SET of this object is done with a value of
'doAction', the system will attempt to r…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.3
msapInfoLastChanged
The value of msapInfoLastChanged indicates the
sysUpTime at the time of the last modification of this entry.

If no changes were made to the entry since the last
re-initialization of the local network man…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.4

msapCaptureSapStatsTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.49 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk msapCaptureSapStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::msapCaptureSapStatsTable' 
A table that contains statistics for SAPs 
with a sapSubType value of 'capture'.
msapCaptureSapStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.49.1
Statistics for a specific 'capture' SAP.
Indexes
Column Syntax OID
msapCaptureSapStatsTriggerType
The value of msapCaptureSapStatsTriggerType indicates the
type of trigger packets this entry is for.
Enumeration
Enumerated Values:
1dhcp
2pppoe
 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.1
msapCaptureSapStatsPktsRecvd
The value of msapCaptureSapStatsPktsRecvd indicates the
number of packets received on this 'capture' SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.2
msapCaptureSapStatsPktsRedirect
The value of msapCaptureSapStatsPktsRedirect indicates the
number of packets redirected on this 'capture' SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.3
msapCaptureSapStatsPktsDropped
The value of msapCaptureSapStatsPktsDropped indicates the
number of packets dropped on this 'capture' SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.4

sapTlsMrpTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.50 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsMrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsMrpTable' 
The sapTlsMrpTable augments sapTlsInfoTable with
attributes of the Multiple Registration Protocol (MRP)
feature for the TLS SAP.
sapTlsMrpEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.50.1
MRP specific information about a SAP in a TLS.
Indexes
No indexes recorded
Column Syntax OID
sapTlsMrpRxPdus
The value of sapTlsMrpRxPdus indicates the number of MRP packets
received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.1
sapTlsMrpDroppedPdus
The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP
packets on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.2
sapTlsMrpTxPdus
The value of sapTlsMrpTxPdus indicates the number of MRP packets
transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.3
sapTlsMrpRxNewEvent
The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP
events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.4
sapTlsMrpRxJoinInEvent
The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In'
MRP events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.5
sapTlsMrpRxInEvent
The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP
events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.6
sapTlsMrpRxJoinEmptyEvent
The value of sapTlsMrpRxJoinEmptyEvent indicates the number of
'Join Empty' MRP events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.7
sapTlsMrpRxEmptyEvent
The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty'
MRP events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.8
sapTlsMrpRxLeaveEvent
The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave'
MRP events received on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.9
sapTlsMrpTxNewEvent
The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP
events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.10
sapTlsMrpTxJoinInEvent
The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In'
MRP events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.11
sapTlsMrpTxInEvent
The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP
events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.12
sapTlsMrpTxJoinEmptyEvent
The value of sapTlsMrpTxJoinEmptyEvent indicates the number of
'Join Empty' MRP events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.13
sapTlsMrpTxEmptyEvent
The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty'
MRP events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.14
sapTlsMrpTxLeaveEvent
The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave'
MRP events transmitted on this SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.15

sapTlsMmrpTable

table
.1.3.6.1.4.1.6527.3.1.2.4.3.51 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk sapTlsMmrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-SAP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-SAP-MIB::sapTlsMmrpTable' 
This table contains an entry for each MAC address managed
by Multiple MAC Registration Protocol (MMRP) on the SAP
for the TLS.  Entries are dynamically created and
destroyed by the system as the MAC Addresses are registered
or declared in MMRP.
sapTlsMmrpEntry row .1.3.6.1.4.1.6527.3.1.2.4.3.51.1
MMRP specific information about a MAC address managed by
MMRP on a SAP in a TLS.
Indexes
Column Syntax OID
sapTlsMmrpMacAddr
The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which
is being managed by MMRP on this SAP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.1
sapTlsMmrpDeclared
The value of sapTlsMmrpDeclared indicates whether the MRP applicant
on this SAP is declaring this MAC address on behalf of MMRP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.2
sapTlsMmrpRegistered
The value of sapTlsMmrpRegistered indicates whether the MRP registrant
on this SAP has notified MMRP of a registration of this MAC address.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.3