ALCATEL-ENT1-TIMETRA-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
32
Rows
32
Columns
513
tmnxPortTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.2
·
1 row entry
·
56 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortTable'
The port table has an entry for each port on each IOM card in each chassis in the TMNX system.
Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its support…
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its support…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxPortPortID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||
|
The tmnxPortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxPortEntry row for this port. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||
|
The type of port or optical pack installed.
|
TmnxPortType Description: The TmnxPortType data type is an enumerated integer that describes the values used to identify the specific type of hardware port. A TmnxPortType value specifies the index value for the entry in the tmnxPortTypeTable … |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||
|
The class of port or optical pack installed. This can be
derived from tmnxPortType. |
TmnxPortClass Type Values:
Description: The TmnxPortClass data type is an enumerated integer that describes the values used to identify the class of interface provided by this port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||
|
A textual string containing user supplied information about the
interface. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemLongDescriptionr/w Type Constraints: range: 0..160Description: Longer description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||
|
The textual name of the interface. The value of this
object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might … |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||
|
This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPor… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7 |
||||||||||||||||||||||||||||||||||||||||||||
|
When tmnxPortUserAssignedMac has a value of 'true', the value of
tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the sys… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8 |
||||||||||||||||||||||||||||||||||||||||||||
|
When tmnxPortUserAssignedMac has a value of 'true',
tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress ret… |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9 |
||||||||||||||||||||||||||||||||||||||||||||
|
The interface's hardware or system assigned MAC address at its
protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. … |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10 |
||||||||||||||||||||||||||||||||||||||||||||
|
The tmnxPortMode variable indicates if the interface on this port
is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11 |
||||||||||||||||||||||||||||||||||||||||||||
|
The type of encapsulation protocol configured on this
port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortLagId indicates which LAG or multi-link trunk
(MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this… |
Unsigned32r/w Constraints: range: 0-200 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortHoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transi… |
secondsUnsigned32r/w Constraints: range: 0-50 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortHoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent tr… |
secondsUnsigned32r/w Constraints: range: 0-50 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15 |
||||||||||||||||||||||||||||||||||||||||||||
|
The tmnxPortUpProtocols variable is a bitmap that indicates what
protocols can be used on this port type. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16 |
||||||||||||||||||||||||||||||||||||||||||||
|
The type of connector installed on this port.
|
TmnxPortConnectorType Description: The TmnxPortConnectorType data type is an enumerated integer that describes the values used to identify the connector type used on a port. A TmnxPortConnectorType value specifies the index value for the entry in the… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17 |
||||||||||||||||||||||||||||||||||||||||||||
|
Type of the transceiver.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortTransceiverCodeobsolete
The code for the transmission media.
tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26 |
||||||||||||||||||||||||||||||||||||||||||||
|
The light wavelength transmitted by the transceiver's laser.
A value of zero indicates that the port is not equipped with the transceiver. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27 |
||||||||||||||||||||||||||||||||||||||||||||
|
Indicates if the transceiver is capable of doing diagnostics.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28 |
||||||||||||||||||||||||||||||||||||||||||||
|
Model number of the transceiver.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29 |
||||||||||||||||||||||||||||||||||||||||||||
|
The external connector provided on the interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30 |
||||||||||||||||||||||||||||||||||||||||||||
|
The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31 |
||||||||||||||||||||||||||||||||||||||||||||
|
The vendor's date code.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32 |
||||||||||||||||||||||||||||||||||||||||||||
|
The media supported for the SFP.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33 |
||||||||||||||||||||||||||||||||||||||||||||
|
Indicates if the SFP is equipped.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34 |
||||||||||||||||||||||||||||||||||||||||||||
|
Indicates if there is an optics pack installed in this
port or not. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35 |
||||||||||||||||||||||||||||||||||||||||||||
|
Indicates whether or not the port has a physical link.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36 |
||||||||||||||||||||||||||||||||||||||||||||
|
The desired administrative status of this port.
|
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxPortAdminStatusr/w Type Values:
Description: The desired administrative status of this port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37 |
||||||||||||||||||||||||||||||||||||||||||||
|
The current operational status of this port.
|
TmnxPortOperStatus Type Values:
Description: The current operational status of this port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38 |
||||||||||||||||||||||||||||||||||||||||||||
|
The state level of this port. A value of 'none' indicates
the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This sta… |
TmnxPortState Type Values:
Description: The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This … |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39 |
||||||||||||||||||||||||||||||||||||||||||||
|
The tmnxPortPrevState indicates the state level that the port
transitioned from into the current tmnxPortState level. |
TmnxPortState Type Values:
Description: The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This … |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40 |
||||||||||||||||||||||||||||||||||||||||||||
|
The number of alarms currently outstanding on this port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortAlarmState indicates the current alarm
state for this port. |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxAlarmState Type Values:
Description: The TmnxAlarmState is an enumerated integer whose value indicates the current alarm state of a physical or logical component in the Alcatel 7x50 SR series system. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortLastAlarmEvent is an object identifier whose
object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tm… |
SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43 |
||||||||||||||||||||||||||||||||||||||||||||
|
Setting this action variable causes all the alarms
associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be remo… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values:
Description: The TmnxActionType data type is an enumerated integer that describes the values used to support action or operation style commands. Setting a variable of this type to 'doAction' causes the action to occur. GETs and GE… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortSFPVendorSerialNum contains ASCII characters,
defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45 |
||||||||||||||||||||||||||||||||||||||||||||
|
The vendor part number contains ASCII characters,
defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46 |
||||||||||||||||||||||||||||||||||||||||||||
|
The tmnxPortLastStateChanged variable contains the
value of the sysUpTime the last time the operational status of the port changed state. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48 |
||||||||||||||||||||||||||||||||||||||||||||
|
For SONET/SDH paths or TDM channels, tmnxPortNumChannels
contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPo… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortNetworkEgrQueues contains the network egress queue policy
if the tmnxPortMode is network. Otherwise this object has no significance. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortBundleNumber identifies the bundle for which this port is
a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero. |
Integer32 Constraints: range: 0-1280 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM'
bits in ALCATEL-ENT1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capabl… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM'
bits in ALCATEL-ENT1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of… |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxMDAChanType Type Values:
Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortParentPortID is applicable only when the 'isSonet'
and/or 'isTDM' bits in ALCATEL-ENT1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel … |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54 |
||||||||||||||||||||||||||||||||||||||||||||
|
tmnxPortOpticalCompliance is applicable only when the
tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms. |
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortLoadBalanceAlgorithm specifies the load
balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS
port-scheduler policy for this port. This object must correspond to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortLastClearedTime indicates the sysUpTime
when the counters in the IF-MIB:ifTable were last cleared. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortIngNamedPoolPlcy specifies a named pool
policy associated with an port ingress context. The policy governs the way named pools are created at the port level. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortEgrNamedPoolPlcy specifies a named pool
policy associated with an port egress context. The policy governs the way named pools are created at the port level. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortIngPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port. |
Unsigned32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortEgrPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port. |
Unsigned32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortDDMEventSuppression specifies whether or not an
inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true). |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64 |
||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSFPStatus indicates the operational status of
the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is d… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65 |
tmnxPortTestTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.3
·
1 row entry
·
8 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortTestTable'
The tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system.
Each row entry represents a port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The current testing status of this port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1 |
||||||||||
|
The type of test to be executed on this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2 |
||||||||||
|
A parameter to be passed to the test program.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3 |
||||||||||
|
The status of the last test executed on this port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4 |
||||||||||
|
The date and time the test started on this port.
Returns 0 if tmnxPortTestState is notInTest. |
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5 |
||||||||||
|
The date and time the last test completed. Returns 0
if a test is in progress or no tests have yet to be run on this port. |
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6 |
||||||||||
|
The number of seconds the port test is anticipated to last.
|
Integer32r/w Constraints: range: 0-256 |
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7 |
||||||||||
|
The operator sets this variable to perform the appropriate
type of testing. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8 |
tmnxPortEtherTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.4
·
1 row entry
·
26 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortEtherTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortEtherTable'
The tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system.
Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM card entry
can be deleted from the tmnxMDATable, its su…
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM card entry
can be deleted from the tmnxMDATable, its su…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The size of the largest packet which can be sent/received
on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest netw… |
bytesUnsigned32r/w Constraints: range: 0-0range: 512-9212 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1 |
||||||||||||
|
The tmnxPortEtherDuplex variable specifies the duplex mode used by
the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2 |
||||||||||||
|
The tmnxPortEtherSpeed variable specifies the link speed of the
Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parame… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3 |
||||||||||||
|
When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet
interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes s… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4 |
||||||||||||
|
The tmnxPortEtherOperDuplex variable indicates the operational duplex
mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the l… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5 |
||||||||||||
|
The tmnxPortEtherOperSpeed variable indicates the operational speed
of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link par… |
mega-bits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6 |
||||||||||||
|
The value of the accounting policy must be defined prior to associating
the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId… |
Unsigned32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7 |
||||||||||||
|
Enable/disable the collection of accounting and statistical data
for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the des… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8 |
||||||||||||
|
The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet
interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of E… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9 |
||||||||||||
|
The tmnxPortEtherXGigMode variable specifies whether the Ethernet
interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10 |
||||||||||||
|
The tmnxPortEtherEgressRate variable specifies the maximum egress
bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the pro… |
Integer32r/w Constraints: range: -1--1range: 1-10000000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11 |
||||||||||||
|
The tmnxPortEtherDot1qEtype variable indicates the ethertype expected
when the port's encapsulation type is dot1qEncap. |
Unsigned32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12 |
||||||||||||
|
The tmnxPortEtherQinqEtype variable indicates the ethertype expected
when the port's encapsulation type is qinqEncap. |
Unsigned32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13 |
||||||||||||
|
The tmnxPortEtherIngressRate variable specifies the maximum ingress
bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the pr… |
mega-bits per secondInteger32r/w Constraints: range: -1--1range: 1-10000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14 |
||||||||||||
|
The value of tmnxPortEtherReportAlarm determines when and if to
generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear. |
TmnxPortEtherReportStatusr/w Type Values:
Description: The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15 |
||||||||||||
|
The value of tmnxPortEtherReportAlarmStatus indicates the alarms on
this port. |
TmnxPortEtherReportStatus Type Values:
Description: The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16 |
||||||||||||
|
The total number of packets received that were longer than 1518 octets
but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were ot… |
PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17 |
||||||||||||
|
The number of times the associated tmnxPortEtherPkts1519toMax
counter has overflowed. |
PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18 |
||||||||||||
|
The total number of packets (including bad packets) received that were
between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). … |
PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19 |
||||||||||||
|
The value of tmnxPortEtherLacpTunnel specifies whether the LACP
packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20 |
||||||||||||
|
The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether
physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherTy… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21 |
||||||||||||
|
The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the
number of seconds between each keep alive PDU transmission. |
secondsUnsigned32r/w Constraints: range: 1-120 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22 |
||||||||||||
|
The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum
number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should no… |
secondsUnsigned32r/w Constraints: range: 0-0range: 10-160 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23 |
||||||||||||
|
The value of tmnxPortEtherDownWhenLoopedState indicates whether
a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24 |
||||||||||||
|
The tmnxPortEtherPBBEtype variable indicates the Ethertype expected
for Provider Backbone Bridging Frames. |
Unsigned32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25 |
||||||||||||
|
The tmnxPortEtherReasonDownFlags indicates why an ethernet port may
be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) … |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26 |
tmnxSonetTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.5
·
1 row entry
·
26 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxSonetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxSonetTable'
The tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system.
Each row entry represents a packet over Sonet port on a
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Before an IOM
tmnxMDAEntry can be deleted from the tmnxMDA…
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Before an IOM
tmnxMDAEntry can be deleted from the tmnxMDA…
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The rate of this optical facility.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1 |
||||||||||||||||||||||||||
|
tmnxSonetClockSource configures the clock for transmitted data from
either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed'). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2 |
||||||||||||||||||||||||||
|
The value of tmnxSonetFraming indicates the type of framing used
on this interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3 |
||||||||||||||||||||||||||
|
The value of tmnxSonetReportAlarm determines when and if to
generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational … |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4 |
||||||||||||||||||||||||||
|
The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a B… |
Unsigned32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5 |
||||||||||||||||||||||||||
|
The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a B… |
Unsigned32r/w Constraints: range: 3-6 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6 |
||||||||||||||||||||||||||
|
tmnxSonetApsobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7 |
||||||||||||||||||||||||||
|
tmnxSonetApsAdminStatusobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxPortAdminStatusr/w Type Values:
Description: The desired administrative status of this port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8 |
||||||||||||||||||||||||||
|
tmnxSonetApsOperStatusobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
TmnxPortOperStatus Type Values:
Description: The current operational status of this port. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9 |
||||||||||||||||||||||||||
|
tmnxSonetApsAuthKeyobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
OctetStringr/w Constraints: range: 0-256 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10 |
||||||||||||||||||||||||||
|
tmnxSonetApsNeighborAddrobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11 |
||||||||||||||||||||||||||
|
tmnxSonetApsAdvertiseIntervalobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
millisecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647Description: A period of time, measured in units of 0.01 seconds. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12 |
||||||||||||||||||||||||||
|
tmnxSonetApsAdvertiseTimeLeftobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
millisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647Description: A period of time, measured in units of 0.01 seconds. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13 |
||||||||||||||||||||||||||
|
tmnxSonetApsHoldTimeobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
millisecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647Description: A period of time, measured in units of 0.01 seconds. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14 |
||||||||||||||||||||||||||
|
tmnxSonetApsHoldTimeLeftobsolete
Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB. |
millisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647Description: A period of time, measured in units of 0.01 seconds. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15 |
||||||||||||||||||||||||||
|
Activate a loopback on the SONET port. The SONET port must be in a
shutdown state to activate any type of loopback. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16 |
||||||||||||||||||||||||||
|
The bits in this object are used for indicating the alarms. The bits
are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. la… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17 |
||||||||||||||||||||||||||
|
The tmnxSonetSectionTraceMode variable along with the
tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 by… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18 |
||||||||||||||||||||||||||
|
The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode
variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. I… |
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19 |
||||||||||||||||||||||||||
|
The tmnxSonetMonS1Byte variable reports the Synchronization Status
Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchroniza… |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20 |
||||||||||||||||||||||||||
|
The tmnxSonetMonJ0String variable reports the contents of the j0 byte
in the SONET Section Header. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21 |
||||||||||||||||||||||||||
|
The tmnxSonetMonK1Byte variable reports the Automatic Protection
Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header. |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22 |
||||||||||||||||||||||||||
|
The tmnxSonetMonK1Byte variable reports the Automatic Protection
Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header. |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23 |
||||||||||||||||||||||||||
|
tmnxSonetSingleFiber is used to enable/disable packet gathering and
redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state ro… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24 |
||||||||||||||||||||||||||
|
The value of tmnxSonetHoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent trans… |
100s of millisecondsUnsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25 |
||||||||||||||||||||||||||
|
The value of tmnxSonetHoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent t… |
100s of millisecondsUnsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26 |
tmnxSonetPathTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.6
·
1 row entry
·
17 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxSonetPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxSonetPathTable'
The tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system.
Each row entry represents a configured sonet path in a packet
over Sonet port on a IOM card in a chassis in the system.
The tmnxSonetPathEntry contains attributes that are
unique to a sonet path of a 'sonet' TmnxPortT…
over Sonet port on a IOM card in a chassis in the system.
The tmnxSonetPathEntry contains attributes that are
unique to a sonet path of a 'sonet' TmnxPortT…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxSonetPathRowStatus controls the creation and deletion of
row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 |
||||||||||||||||||||||||||||||||||||||
|
The tmnxSonetPathLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 |
||||||||||||||||||||||||||||||||||||||
|
The size of the largest packet which can be sent/received
on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be… |
bytesUnsigned32r/w Constraints: range: 0-0range: 512-9208 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 |
||||||||||||||||||||||||||||||||||||||
|
If the tmnxSonetPathScramble variable is set to 'true',
SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 |
||||||||||||||||||||||||||||||||||||||
|
The tmnxSonetPathC2Byte variable is used configure the value
used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled s… |
Unsigned32r/w Constraints: range: 0-254 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 |
||||||||||||||||||||||||||||||||||||||
|
The tmnxSonetPathJ1String variable is used to configure the sonet path
trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded wit… |
OctetStringr/w Constraints: range: 0-62 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 |
||||||||||||||||||||||||||||||||||||||
|
The value of tmnxSonetPathCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 |
||||||||||||||||||||||||||||||||||||||
|
The negotiated size of the largest packet which can be sent on
the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram t… |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 |
||||||||||||||||||||||||||||||||||||||
|
The negotiated size of the largest packet that can be received
on the sonet path, specified in octets. |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 |
||||||||||||||||||||||||||||||||||||||
|
The value of tmnxSonetPathReportAlarm determines when and if to
generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal error… |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 |
||||||||||||||||||||||||||||||||||||||
|
The value of the accounting policy must be defined prior to associating
the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicy… |
Unsigned32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 |
||||||||||||||||||||||||||||||||||||||
|
Enable/disable the collection of accounting and statistical data
for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the design… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 |
||||||||||||||||||||||||||||||||||||||
|
The bits in this object are used for indicating the alarms. The bits
are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) … |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 |
||||||||||||||||||||||||||||||||||||||
|
The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH
C2 header byte. |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 |
||||||||||||||||||||||||||||||||||||||
|
The tmnxSonetPathJ1String variable reports the sonet path
trace string received in the J1 Path Overhead bytes. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 |
||||||||||||||||||||||||||||||||||||||
|
tmnxSonetPathTypeobsolete
tmnxSonetPathType specifies if the associated SONET/SDH Path
is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 -… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 |
||||||||||||||||||||||||||||||||||||||
|
tmnxSonetPathChildType is used to configure the type of this path.
Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child pa… |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxMDAChanTyper/w Type Values:
Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA. |
.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 |
tmnxPortTypeTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.7
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortTypeTable'
The Port type table has an entry for each Alcatel 7x50 SR series port model.
Each row entry represents an Alcatel 7x50 SR series port model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The unique index value which identifies this type of Alcatel 7x50
SR series port model. |
TmnxPortType Description: The TmnxPortType data type is an enumerated integer that describes the values used to identify the specific type of hardware port. A TmnxPortType value specifies the index value for the entry in the tmnxPortTypeTable … |
.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1 |
||||
|
The administrative name that identifies this type of Alcatel
7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2 |
||||
|
A detailed description of this Alcatel 7x50 SR series port model.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3 |
||||
|
When tmnxPortTypeStatus has a value of 'true' it indicates that
this port model is supported in this revision of the management software. When it has a value of 'false' there is no support. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4 |
tmnxPortConnectTypeTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.8
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortConnectTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortConnectTypeTable'
The Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model.
Each row entry represents an Alcatel 7x50 SR series port
Connector model. Rows in this table are created by the agent
at initialization and cannot be created or destroyed by SNMP
Get or Set requests.
Connector model. Rows in this table are created by the agent
at initialization and cannot be created or destroyed by SNMP
Get or Set requests.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The unique index value which identifies this type of Alcatel
7x50 SR series port connector model. |
TmnxPortConnectorType Description: The TmnxPortConnectorType data type is an enumerated integer that describes the values used to identify the connector type used on a port. A TmnxPortConnectorType value specifies the index value for the entry in the… |
.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1 |
||||
|
The administrative name that identifies this type of Alcatel
7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2 |
||||
|
A detailed description of this Alcatel 7x50 SR series port
connector model. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3 |
||||
|
When tmnxPortConnectTypeStatus has a value of 'true' it indicates that
this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9
·
1 row entry
·
17 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortFCStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortFCStatsTable'
The Network Port FC Stats table has an entry for each forwarding class defined on each network port.
Each row entry represents a set of ingress and egress packet and
octet statistics for the given network port and forwarding class.
Rows in this table are created by the agent when the network port
is provisioned and can…
octet statistics for the given network port and forwarding class.
Rows in this table are created by the agent when the network port
is provisioned and can…
| Column | Syntax | OID |
|---|---|---|
|
tmnxPortFCStatsIndexobsolete
The forwarding class associated with these stats
on this network port. |
ALCATEL-ENT1-TIMETRA-TC-MIBTFCName Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1 |
|
tmnxPortFCStatsIngFwdInProfPktsobsolete
The number of in-profile packets (rate below CIR)
forwarded by the ingress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2 |
|
tmnxPortFCStatsIngFwdOutProfPktsobsolete
The number of out-of-profile packets (rate above CIR)
forwarded by the ingress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3 |
|
tmnxPortFCStatsIngFwdInProfOctsobsolete
The number of in-profile octets (rate below CIR)
forwarded by the ingress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4 |
|
tmnxPortFCStatsIngFwdOutProfOctsobsolete
The number of out-of-profile octets (rate above CIR)
forwarded by the ingress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5 |
|
tmnxPortFCStatsIngDroInProfPktsobsolete
The number of in-profile packets (rate below CIR)
dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6 |
|
tmnxPortFCStatsIngDroOutProfPktsobsolete
The number of out-of-profile packets (rate above CIR)
dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7 |
|
tmnxPortFCStatsIngDroInProfOctsobsolete
The number of in-profile octets (rate below CIR)
dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8 |
|
tmnxPortFCStatsIngDroOutProfOctsobsolete
The number of out-of-profile octets (rate above CIR)
dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9 |
|
tmnxPortFCStatsEgrFwdInProfPktsobsolete
The number of in-profile packets (rate below CIR)
forwarded by the egress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10 |
|
tmnxPortFCStatsEgrFwdOutProfPktsobsolete
The number of out-of-profile packets (rate above CIR)
forwarded by the egress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11 |
|
tmnxPortFCStatsEgrFwdInProfOctsobsolete
The number of in-profile octets (rate below CIR)
forwarded by the egress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12 |
|
tmnxPortFCStatsEgrFwdOutProfOctsobsolete
The number of out-of-profile octets (rate above CIR)
forwarded by the egress Qchip. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13 |
|
tmnxPortFCStatsEgrDroInProfPktsobsolete
The number of in-profile packets (rate below CIR)
dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14 |
|
tmnxPortFCStatsEgrDroOutProfPktsobsolete
The number of out-of-profile packets (rate above CIR)
dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15 |
|
tmnxPortFCStatsEgrDroInProfOctsobsolete
The number of in-profile octets (rate below CIR)
dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16 |
|
tmnxPortFCStatsEgrDroOutProfOctsobsolete
The number of out-of-profile octets (rate above CIR)
dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17 |
tmnxDS3Table
table.1.3.6.1.4.1.6527.3.1.2.2.4.10
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDS3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDS3Table'
The tmnxDS3Table has an entry for a DS3 physical port.
Each row entry represents a physical DS3 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tm…
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tm…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tmnxDS3Buildout configures the T3 line buildout. A T3 port has two
settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object appl… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1 |
||||
|
The tmnxDS3LastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxDS3Entry row for this port. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2 |
||||
|
tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3 |
tmnxDS3ChannelTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.11
·
1 row entry
·
39 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDS3ChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDS3ChannelTable'
The tmnxDS3ChannelTable has an entry for a DS3 channel.
Each row entry represents a DS3 channel. Entries can be created
and deleted via SNMP SET operations. The tmnxDS3ChannelEntry
contains attributes that are applicable to a DS3 channel which
can belong to the DS3 physic…
and deleted via SNMP SET operations. The tmnxDS3ChannelEntry
contains attributes that are applicable to a DS3 channel which
can belong to the DS3 physic…
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxDS3ChannelRowStatus controls the creation and deletion of
row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelType indicates whether the channel is
in DS3 or E3 mode. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelFraming indicates the type of framing
associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3 |
||||||||||||||||||||||
|
tmnxDS3ChannelClockSource configures the clock for transmitted data
from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'). |
TmnxDSXClockSourcer/w Type Values:
Description: The TmnxDSXClockSource data type is an enumerated type that indicates the clock for transmitted data on a DS3 or DS1 channel. loopTimed(1) - The clock is recovered from the line's receive data str… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4 |
||||||||||||||||||||||
|
tmnxDS3ChannelChannelized is used to create sub-channels of type
'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5 |
||||||||||||||||||||||
|
tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU)
compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6 |
||||||||||||||||||||||
|
tmnxDS3ChannelSubrate configures the subrate step.
tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbp… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7 |
||||||||||||||||||||||
|
tmnxDS3ChannelIdleCycleFlags configures the value that the
DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a de… |
TmnxDSXIdleCycleFlagsr/w Type Values:
Description: The TmnxDSXIdleCycleFlags data type is an enumerated integer that indicates the value that the DS3/DS1 port/channel or a DS0 channel group transmits during idle cycle. The value of 'none' is applicable to AT… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 |
||||||||||||||||||||||
|
tmnxDS3ChannelLoopback is used to put the channel into a loopback mode.
The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received … |
TmnxDS3Loopbackr/w Type Values:
Description: The TmnxDS3Loopback data type is an enumerated integer that indicates the type of loopback the DS3 port/channel currently is in. A 'line' loopback loops frames received on this port back to the remote system. A 'inte… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 |
||||||||||||||||||||||
|
tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits tran… |
Integer32r/w Constraints: range: 0-0range: 2-7 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTPattern indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates… |
TmnxDSXBertPatternr/w Type Values:
Description: The TmnxDSXBertPattern data type is an enumerated integer that indicates the pattern used for the Bit Error Rate Test (BERT). |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTDuration is used to set the duration of the
BERT test. |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the
Message Data Link (MDL). |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the
Message Data Link (MDL). |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-11Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the
Message Data Link (MDL). |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the
Message Data Link (MDL). |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-6Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in
the Message Data Link (MDL) Path message. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-38Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLPortString configures the port number string sent in
the Message Data Link (MDL) idle signal message. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-38Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLGenString configures the generator number string
sent in the Message Data Link (MDL) test signal message. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-38Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLMessageType configures the type of MDL message that
is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmis… |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20 |
||||||||||||||||||||||
|
When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 |
||||||||||||||||||||||
|
The size of the largest packet which can be sent/received
on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent … |
bytesUnsigned32r/w Constraints: range: 0-0range: 512-9208 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 |
||||||||||||||||||||||
|
The negotiated size of the largest packet which can be sent on
the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that ca… |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelReportAlarm determines when and if to
generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of sign… |
TmnxDSXReportAlarmr/w Type Values:
Description: The TmnxDSXReportAlarm data type indicates the type of TDM alarm: ais - alarm indication signal errors. los - loss of signal errors. oof - out-of-frame errors. rai - resource availability indicator events. looped - fa… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelReportAlarmStatus indicates the current
alarms on this port. |
TmnxDSXReportAlarm Type Values:
Description: The TmnxDSXReportAlarm data type indicates the type of TDM alarm: ais - alarm indication signal errors. los - loss of signal errors. oof - out-of-frame errors. rai - resource availability indicator events. looped - fa… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 |
||||||||||||||||||||||
|
The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 |
||||||||||||||||||||||
|
tmnxDS3ChannelInFEACLoop indicates whether the remote end has put
this channel in FEAC(Far End Alarm Control) loopback. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLMonPortString indicates the port number string
received in the Message Data Link (MDL) idle signal message. |
SNMPv2-TCDisplayString Constraints: range: 0-38Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 |
||||||||||||||||||||||
|
tmnxDS3ChannelMDLMonGenString indicates the generator number string
received in the Message Data Link (MDL) test signal message. |
SNMPv2-TCDisplayString Constraints: range: 0-38Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test
as specified by TmnxDSXBertOperStatus. |
TmnxDSXBertOperStatus Type Values:
Description: The TmnxDSXBertOperStatus data type is an enumerated integer that indicates the status of Bit Error Rate Test (BERT). When BERT is activated, the status will be 'active'. Otherwise the status will be 'idle' or 'noMdaRe… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperSta… |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 |
||||||||||||||||||||||
|
tmnxDS3ChannelBERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transition… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 |
||||||||||||||||||||||
|
When tmnxDS3ChannelScramble indicates whether scrambling
is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting
policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value in… |
Unsigned32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistic… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelClockSyncState indicates the current clock
synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'. |
TmnxDSXClockSyncState Type Values:
Description: The TmnxDSXClockSyncState data type is an enumeration type that indicates the clock synchronization state on a DS3 or DS1 channel. unknown(0) - Unsupported or unknown state normal(1) - Normal (locked) state… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 |
||||||||||||||||||||||
|
The value of tmnxDS3ChannelClockMasterPortId indicates the current
clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 |
tmnxDS1Table
table.1.3.6.1.4.1.6527.3.1.2.2.4.12
·
1 row entry
·
25 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDS1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDS1Table'
The tmnxDS1Table has an entry for each DS1 channel.
Each row entry represents a DS1 channel on a IOM card
in a chassis in the system. DS1 channel entries for DS3
ports cannot be created and deleted via SNMP SET operations.
Entries in this table will be created automati…
in a chassis in the system. DS1 channel entries for DS3
ports cannot be created and deleted via SNMP SET operations.
Entries in this table will be created automati…
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxDS1RowStatus controls the creation and deletion of
row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1 |
||||||||||||||||||||||
|
The value of tmnxDS1Type indicates whether the DS1 channel is
in DS1, E1 or J1 mode. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2 |
||||||||||||||||||||||
|
The value of tmnxDS1Framing indicates the type of framing associated
with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3 |
||||||||||||||||||||||
|
tmnxDS1IdleCycleFlagsobsolete
tmnxDS1IdleCycleFlags configures the value that the DS1
channel transmits during idle cycle. |
TmnxDSXIdleCycleFlagsr/w Type Values:
Description: The TmnxDSXIdleCycleFlags data type is an enumerated integer that indicates the value that the DS3/DS1 port/channel or a DS0 channel group transmits during idle cycle. The value of 'none' is applicable to AT… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4 |
||||||||||||||||||||||
|
tmnxDS1Loopback is used to put the channel into a loopback mode. The
value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this… |
TmnxDS1Loopbackr/w Type Values:
Description: The TmnxDS1Loopback data type is an enumerated integer that indicates the type of loopback the DS1 port/channel currently is in. A 'line' loopback loops frames received on this port back to the remote system. A 'inte… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5 |
||||||||||||||||||||||
|
Setting tmnxDS1InvertData to 'true' causes all data bits to
be inverted, to guarantee ones density. It is typically used with AMI line encoding. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6 |
||||||||||||||||||||||
|
tmnxDS1BitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted… |
Integer32r/w Constraints: range: 0-0range: 2-7 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7 |
||||||||||||||||||||||
|
tmnxDS1BERTPattern object indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test. |
TmnxDSXBertPatternr/w Type Values:
Description: The TmnxDSXBertPattern data type is an enumerated integer that indicates the pattern used for the Bit Error Rate Test (BERT). |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8 |
||||||||||||||||||||||
|
tmnxDS1BERTDuration is used to set the duration of the BERT test.
|
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9 |
||||||||||||||||||||||
|
The value of tmnxDS1ReportAlarm determines when and if to
generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal erro… |
TmnxDSXReportAlarmr/w Type Values:
Description: The TmnxDSXReportAlarm data type indicates the type of TDM alarm: ais - alarm indication signal errors. los - loss of signal errors. oof - out-of-frame errors. rai - resource availability indicator events. looped - fa… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10 |
||||||||||||||||||||||
|
The value of tmnxDS1ReportAlarmStatus indicates the current alarms
on this channel. |
TmnxDSXReportAlarm Type Values:
Description: The TmnxDSXReportAlarm data type indicates the type of TDM alarm: ais - alarm indication signal errors. los - loss of signal errors. oof - out-of-frame errors. rai - resource availability indicator events. looped - fa… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11 |
||||||||||||||||||||||
|
The tmnxDS1LastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxDS1Entry row for this channel. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12 |
||||||||||||||||||||||
|
tmnxDS1ClockSource configures the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the ra… |
TmnxDSXClockSourcer/w Type Values:
Description: The TmnxDSXClockSource data type is an enumerated type that indicates the clock for transmitted data on a DS3 or DS1 channel. loopTimed(1) - The clock is recovered from the line's receive data str… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13 |
||||||||||||||||||||||
|
tmnxDS1BERTOperStatus indicates the status of the BERT test as
specified by TmnxDSXBertOperStatus. |
TmnxDSXBertOperStatus Type Values:
Description: The TmnxDSXBertOperStatus data type is an enumerated integer that indicates the status of Bit Error Rate Test (BERT). When BERT is activated, the status will be 'active'. Otherwise the status will be 'idle' or 'noMdaRe… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14 |
||||||||||||||||||||||
|
tmnxDS1BERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transition… |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15 |
||||||||||||||||||||||
|
tmnxDS1BERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16 |
||||||||||||||||||||||
|
tmnxDS1BERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'activ… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17 |
||||||||||||||||||||||
|
When tmnxDS1RemoteLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18 |
||||||||||||||||||||||
|
tmnxDS1InRemoteLoop indicates whether the remote end has put
this channel in remote loopback. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19 |
||||||||||||||||||||||
|
tmnxDS1InsertSingleBitError is used to insert a single bit error for a
BERT test. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values:
Description: The TmnxActionType data type is an enumerated integer that describes the values used to support action or operation style commands. Setting a variable of this type to 'doAction' causes the action to occur. GETs and GE… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20 |
||||||||||||||||||||||
|
The value of tmnxDS1SignalMode indicates the type of signalling
associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The de… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21 |
||||||||||||||||||||||
|
The value of tmnxDS1ClockSyncState indicates the current clock
synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'. |
TmnxDSXClockSyncState Type Values:
Description: The TmnxDSXClockSyncState data type is an enumeration type that indicates the clock synchronization state on a DS3 or DS1 channel. unknown(0) - Unsupported or unknown state normal(1) - Normal (locked) state… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22 |
||||||||||||||||||||||
|
The value of tmnxDS1ClockMasterPortId indicates the current clock
synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23 |
||||||||||||||||||||||
|
The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER S… |
error bits in million bits receivedUnsigned32r/w Constraints: range: 1-1range: 5-5range: 10-10range: 50-50range: 100-100 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24 |
||||||||||||||||||||||
|
The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER S… |
error bits in million bits receivedUnsigned32r/w Constraints: range: 1-1range: 5-5range: 10-10range: 50-50range: 100-100 |
.1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25 |
tmnxDS0ChanGroupTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.13
·
1 row entry
·
15 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDS0ChanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDS0ChanGroupTable'
The tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel.
Each row entry represents one or more DS0 channels on a
DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or
remove DS0 channels from the group.
Entries can be created and deleted via SNMP SE…
DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or
remove DS0 channels from the group.
Entries can be created and deleted via SNMP SE…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxDS0ChanGroupRowStatus controls the creation and deletion of
row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1 |
||||||||||||
|
tmnxDS0ChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel g… |
TmnxDs0ChannelListr/w Type Constraints: range: 0..4Description: A list of ds0 timeslots on a DS1 line. The list is specified as an OCTET STRING in which each ds0 timeslot is represented by a single bit, where timeslots 1 through 8 are represented by the bits in the first… |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2 |
||||||||||||
|
tmnxDS0ChanGroupSpeed configures the required link speed
for all the time slots included in this channel group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3 |
||||||||||||
|
The value of tmnxDS0ChanGroupCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4 |
||||||||||||
|
The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that ca… |
bytesUnsigned32r/w Constraints: range: 0-0range: 512-9208 |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5 |
||||||||||||
|
The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network dat… |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6 |
||||||||||||
|
The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7 |
||||||||||||
|
tmnxDS0ChanGroupIdleCycleFlags configures the value that the
channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really… |
TmnxDSXIdleCycleFlagsr/w Type Values:
Description: The TmnxDSXIdleCycleFlags data type is an enumerated integer that indicates the value that the DS3/DS1 port/channel or a DS0 channel group transmits during idle cycle. The value of 'none' is applicable to AT… |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8 |
||||||||||||
|
tmnxDS0ChanGroupScramble indicates whether payload scrambling
is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9 |
||||||||||||
|
The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting
policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero … |
Unsigned32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10 |
||||||||||||
|
The value of tmnxDS0ChanGroupCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the s… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11 |
||||||||||||
|
The value of tmnxDS0ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the valu… |
TmnxDSXIdleFillTyper/w Type Values:
Description: The TmnxDSXIdleFillType data type is an enumerated integer that indicates the type of data fill that a CEM DS3/DS1 channel or a DS0 channel group plays out when the channel experiences underun. - The value o… |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12 |
||||||||||||
|
The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload
fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. T… |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13 |
||||||||||||
|
The value of tmnxDS0ChanGroupSignalFillType specifies the type of
idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the va… |
TmnxDSXIdleFillTyper/w Type Values:
Description: The TmnxDSXIdleFillType data type is an enumerated integer that indicates the type of data fill that a CEM DS3/DS1 channel or a DS0 channel group plays out when the channel experiences underun. - The value o… |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14 |
||||||||||||
|
The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. … |
Unsigned32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15 |
tmnxBundleTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.14
·
1 row entry
·
22 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBundleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBundleTable'
The tmnxBundleTable has an entry for a bundle created on the system.
Each row entry represents a multilink bundle on a MDA.
Entries can be created and deleted via SNMP SET operations
using the tmnxBundleRowStatus object. The tmnxBundleBundleID will
contain the bundle number encoded in …
Entries can be created and deleted via SNMP SET operations
using the tmnxBundleRowStatus object. The tmnxBundleBundleID will
contain the bundle number encoded in …
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxBundleBundleID identifies this multilink bundle. The value of
this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmn… |
TmnxBundleID Description: A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1 |
||||||||||||
|
tmnxBundleRowStatus controls the creation and deletion of
row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2 |
||||||||||||
|
tmnxBundleType specifies the type of this multilink bundle.
It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3 |
||||||||||||
|
tmnxBundleMinimumLinks is the minimum number of links that must be
active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down sta… |
Unsigned32r/w Constraints: range: 1-8 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4 |
||||||||||||
|
tmnxBundleNumLinks indicates the total number of links configured
for this bundle. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5 |
||||||||||||
|
tmnxBundleNumActiveLinks indicates the current number of active links
belonging to this bundle. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6 |
||||||||||||
|
tmnxBundleMRRU is used to configure the
Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of m… |
bytesUnsigned32r/w Constraints: range: 0-0range: 1500-9206 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7 |
||||||||||||
|
tmnxBundleOperMRRU indicates the operational value of
Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero. |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8 |
||||||||||||
|
tmnxBundlePeerMRRU indicates the MRRU value sent by the peer
during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero. |
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9 |
||||||||||||
|
tmnxBundleOperMTU indicates the operational MTU of the bundle.
|
bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10 |
||||||||||||
|
tmnxBundleRedDiffDelay configures the maximum acceptable differential
delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. … |
millisecondsUnsigned32r/w Constraints: range: 0-50range: 0-25 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11 |
||||||||||||
|
tmnxBundleRedDiffDelayAction specifies the action to be taken
when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12 |
||||||||||||
|
tmnxBundleYellowDiffDelay configures the yellow warning
threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded t… |
millisecondsUnsigned32r/w Constraints: range: 0-25 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13 |
||||||||||||
|
tmnxBundleShortSequence command specifies that the MLPPP bundle
should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType valu… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14 |
||||||||||||
|
The tmnxBundleLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15 |
||||||||||||
|
The value of tmnxBundleFragmentThreshold specifies the maximum length
of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragm… |
bytesUnsigned32r/w Constraints: range: 0-0range: 128-512 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16 |
||||||||||||
|
tmnxBundleUpTime indicates the time since the bundle is operationally
'inService'. |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17 |
||||||||||||
|
tmnxBundleInputDiscards indicates the number of LCP packets that
were discarded. This object is only supported for a tmnxBundleType value of mlppp. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18 |
||||||||||||
|
tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary
member of this bundle. The value of this object will be zero if there are no members configured in this bundle. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19 |
||||||||||||
|
tmnxBundleLFI specifies if Link Fragmentation and
Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a valu… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20 |
||||||||||||
|
tmnxBundleProtectedType identifies how this bundle is part
of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protec… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21 |
||||||||||||
|
tmnxBundleParentBundle specifies the parent to which this bundle belongs.
A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its … |
TmnxBundleIDr/w Description: A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22 |
tmnxBundleMemberTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.15
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBundleMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBundleMemberTable'
The tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle.
Each row represents a port associated with a bundle. Entries
can be added or removed from this table using SNMP SET operation.
can be added or removed from this table using SNMP SET operation.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxBundleMemberRowStatus controls the creation and deletion of
row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has t… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1 |
||||||||||||||
|
tmnxBundleMemberActive is set to 'false' for one of reasons in
tmnxBundleMemberDownReason. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2 |
||||||||||||||
|
tmnxBundleMemberDownReason contains the reason code for marking
the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberAc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3 |
||||||||||||||
|
tmnxBundleMemberUpTime indicates the time since the bundle member is
active as indicated by tmnxBundleMemberActive. |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4 |
tmnxPortToChannelTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.16
·
1 row entry
·
2 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortToChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortToChannelTable'
The tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable.
Each row represents a mapping of the physical port index and the
channel index string to the index of the channel.
channel index string to the index of the channel.
| Column | Syntax | OID |
|---|---|---|
|
tmnxChannelIdxString is an index into the table. It contains
a string identifying a channel on the physical port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1 |
|
tmnxChannelPortID contains the port ID of the channel. This value
is used to identify the entry for this channel in the ifTable or the tmnxPortTable. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17
·
1 row entry
·
32 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortIngrMdaQosStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortIngrMdaQosStatTable'
The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA.
Each row entry indicates the MDA QoS discard statistics for an
ethernet port located on an oversubscribed MDA.
tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates
the ingress rate configured for the port.
ethernet port located on an oversubscribed MDA.
tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates
the ingress rate configured for the port.
| Column | Syntax | OID |
|---|---|---|
|
tmnxPortIngrMdaQos00StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1 |
|
tmnxPortIngrMdaQos00StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2 |
|
tmnxPortIngrMdaQos01StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3 |
|
tmnxPortIngrMdaQos01StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4 |
|
tmnxPortIngrMdaQos02StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5 |
|
tmnxPortIngrMdaQos02StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6 |
|
tmnxPortIngrMdaQos03StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7 |
|
tmnxPortIngrMdaQos03StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8 |
|
tmnxPortIngrMdaQos04StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9 |
|
tmnxPortIngrMdaQos04StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10 |
|
tmnxPortIngrMdaQos05StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11 |
|
tmnxPortIngrMdaQos05StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12 |
|
tmnxPortIngrMdaQos06StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13 |
|
tmnxPortIngrMdaQos06StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14 |
|
tmnxPortIngrMdaQos07StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15 |
|
tmnxPortIngrMdaQos07StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16 |
|
tmnxPortIngrMdaQos08StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17 |
|
tmnxPortIngrMdaQos08StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18 |
|
tmnxPortIngrMdaQos09StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19 |
|
tmnxPortIngrMdaQos09StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20 |
|
tmnxPortIngrMdaQos10StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21 |
|
tmnxPortIngrMdaQos10StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22 |
|
tmnxPortIngrMdaQos11StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23 |
|
tmnxPortIngrMdaQos11StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24 |
|
tmnxPortIngrMdaQos12StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25 |
|
tmnxPortIngrMdaQos12StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26 |
|
tmnxPortIngrMdaQos13StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27 |
|
tmnxPortIngrMdaQos13StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28 |
|
tmnxPortIngrMdaQos14StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29 |
|
tmnxPortIngrMdaQos14StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30 |
|
tmnxPortIngrMdaQos15StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31 |
|
tmnxPortIngrMdaQos15StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32 |
tmnxSonetGroupTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.18
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxSonetGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxSonetGroupTable'
The tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3.
Each row entry represents a Tributary Unit Group(TUG3) on a path.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxSonetGroupType indicates the sonet group type of this entry.
For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'. |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxMDAChanType Type Values:
Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA. |
.1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1 |
||||||||||||||||||||||||||||||||||||||
|
tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of
this group. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2 |
||||||||||||||||||||||||||||||||||||||
|
tmnxSonetGroupChildType is used to configure the type of the children
of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the val… |
ALCATEL-ENT1-TIMETRA-CHASSIS-MIBTmnxMDAChanTyper/w Type Values:
Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA. |
.1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3 |
||||||||||||||||||||||||||||||||||||||
|
tmnxSonetGroupName is the textual name for this sonet group.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4 |
tmnxCiscoHDLCTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.20
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxCiscoHDLCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxCiscoHDLCTable'
The tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port.
The tmnxCiscoHDLCEntry specifies parameters for a particular
interfaces running Cisco HDLC encapsulation. Entries cannot be created
and deleted via SNMP SET operations.
interfaces running Cisco HDLC encapsulation. Entries cannot be created
and deleted via SNMP SET operations.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds
used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. … |
secondsUnsigned32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1 |
||||||||
|
tmnxCiscoHDLCUpCount specifies the number of continual
keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are prov… |
Unsigned32r/w Constraints: range: 1-3 |
.1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2 |
||||||||
|
tmnxCiscoHDLCDownCount specifies the number of
'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes a… |
Unsigned32r/w Constraints: range: 3-16 |
.1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3 |
||||||||
|
The value of tmnxCiscoHDLCOperState indicates the operational
status of the Cisco HDLC protocol for this port. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState Type Values:
Description: The TmnxOperState data type is an enumerated integer that describes the values used to identify the current operational state of functional modules. |
.1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4 |
tmnxBundleImaGrpTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.21
·
1 row entry
·
34 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBundleImaGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBundleImaGrpTable'
The tmnxBundleImaGrpTable contains IMA Group data
Each row entry contains data on an IMA Group.
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer
used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activat… |
millisecondsUnsigned32r/w Constraints: range: 1-30000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer
used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated. |
millisecondsUnsigned32r/w Constraints: range: 1-30000 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSymmetryMode specifies the type of cell rate
transfer over the virtual link. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTxId specifies the IMA Id generated at group
creation time used by the near-end. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpRxId specifies the IMA ID generated at group
creation time used by the far-end. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member
that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member
that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSmNeState specifies the current state
of the IMA Group for the near-end. |
TmnxImaGrpState Type Values:
Description: The TmnxImaGrpState indicates the current state of the IMA Group State Machine. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSmFeState specifies the current state
of the IMA Group for the far-end. |
TmnxImaGrpState Type Values:
Description: The TmnxImaGrpState indicates the current state of the IMA Group State Machine. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSmFailState specifies the current state
of the IMA Group. |
TmnxImaGrpFailState Type Values:
Description: The TmnxImaGrpFailState indcates the failure reason of an IMA group. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSmDownSecs specifies the number of seconds
that the IMA Group State Machine is not Operational. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpSmOperSecs specifies the number of seconds
that the IMA Group State Machine has been in the Operational State. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpAvailTxCR specifies the available transmit
bandwidth on this IMA group. It only considers members that are in the Active State. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpAvailRxCR specifies the available bandwidth
on this IMA group in the receive direction. It only considers members that are in the Active State. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpNeFails specifies the number of reported
IMA Group failures since boot time. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpFeFails specifies the number of reported
IMA Group far-end failures since boot time. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTxIcpCells specifies number of transmitted
ICP cells for this IMA Group. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpRxIcpCells specifies number of received
ICP cells for this IMA Group. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpErrorIcpCells specifies number of
ICP cells with HEC or CRC-10 errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpLostRxIcpCells specifies the number of
missing ICP cells at the expected offset. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTxOamLablVal specifies near-end value
to be transmitted. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpRxOamLablVal specifies far-end value
received. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpAlphaValue specifies the number of
consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpBetaValue specifies the number of
consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpGammaValue specifies the number of
consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpNeClockMode specifies near-end transmit
clock mode. |
TmnxImaGrpClockModesr/w Type Values:
Description: The TmnxImaGrpClockModes lists the types of clock modes available to IMA Groups. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpFeClockMode specifies far-end transmit
clock mode. |
TmnxImaGrpClockModesr/w Type Values:
Description: The TmnxImaGrpClockModes lists the types of clock modes available to IMA Groups. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpVersion specifies the IMA Version for
this group. |
TmnxImaGrpVersionr/w Type Values:
Description: The TmnxImaGrpVersion lists the types of Ima versions available per IMA Groups. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpMaxConfBw specifies the number of links
that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group. |
Unsigned32r/w Constraints: range: 1-8 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTestState specifies the current state of
the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure.… |
TmnxImaTestStater/w Type Values:
Description: The TmnxImaTestState indicates the current state of the test pattern procedure. |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTestMember specifies a member link to
be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not hav… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpTestPattern specifies the Transmit Test
Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpDiffDelayMaxObs indicates the latest
maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group. |
millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33 |
||||||||||||||||||||||||||||
|
tmnxBundleImaGrpLeastDelayLink indicates a member link
which has the smallest link propagation delay. If this delay has yet to be determined or no member link has been configured, a value of zero is returned. |
millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34 |
tmnxBundleMemberImaTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.22
·
1 row entry
·
29 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBundleMemberImaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBundleMemberImaTable'
The tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group.
Each row entry represents an IMA link associated with
an IMA Group.
an IMA Group.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxBundleMemberImaNeTxState indicates the state of near-end
transmit IMA link. |
TmnxImaLnkState Type Values:
Description: The TmnxImaLnkState indicates the current state of an IMA link. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1 |
||||||||||||||||||
|
tmnxBundleMemberImaNeRxState indicates the state of near-end
receive IMA link. |
TmnxImaLnkState Type Values:
Description: The TmnxImaLnkState indicates the current state of an IMA link. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2 |
||||||||||||||||||
|
tmnxBundleMemberImaFeTxState indicates the state of far-end
transmit IMA link. |
TmnxImaLnkState Type Values:
Description: The TmnxImaLnkState indicates the current state of an IMA link. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3 |
||||||||||||||||||
|
tmnxBundleMemberImaFeRxState indicates the state of far-end
receive IMA link. |
TmnxImaLnkState Type Values:
Description: The TmnxImaLnkState indicates the current state of an IMA link. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4 |
||||||||||||||||||
|
tmnxBundleMemberImaNeRxFailState indicates the IMA link failure
reason for the near-end. |
TmnxImaLnkFailState Type Values:
Description: The TmnxImaLnkFailState indicates the local failure status of a link belonging to an IMA group. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5 |
||||||||||||||||||
|
tmnxBundleMemberImaFeRxFailState indicates the IMA link failure
reason for the far-end. |
TmnxImaLnkFailState Type Values:
Description: The TmnxImaLnkFailState indicates the local failure status of a link belonging to an IMA group. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6 |
||||||||||||||||||
|
tmnxBundleMemberImaTxLid indicates the Link Identifier
assigned to the transmit IMA link. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7 |
||||||||||||||||||
|
tmnxBundleMemberImaRxLid indicates the Link Identifier
used on the receive IMA link. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8 |
||||||||||||||||||
|
tmnxBundleMemberImaViolations indicates the number of
ICP violations including errored, invalid or missing ICP cells. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9 |
||||||||||||||||||
|
tmnxBundleMemberImaNeSevErrSecs indicates the number
of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10 |
||||||||||||||||||
|
tmnxBundleMemberImaFeSevErrSecs indicates the number
of one second intervals in which the far-end contains IMA-RDI defects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11 |
||||||||||||||||||
|
tmnxBundleMemberImaNeUnavailSecs indicates the number
of unavailable seconds at the near-end. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12 |
||||||||||||||||||
|
tmnxBundleMemberImaFeUnavailSecs indicates the number
of unavailable seconds at the near-end. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13 |
||||||||||||||||||
|
tmnxBundleMemberImaNeTxUnuseSecs indicates the number
of unavailable seconds at the near-end transmit link state machine. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14 |
||||||||||||||||||
|
tmnxBundleMemberImaNeRxUnuseSecs indicates the number
of unavailable seconds at the near-end receive link state machine. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15 |
||||||||||||||||||
|
tmnxBundleMemberImaFeTxUnuseSecs indicates the number
of unavailable seconds at the far-end transmit link state machine. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16 |
||||||||||||||||||
|
tmnxBundleMemberImaFeRxUnuseSecs indicates the number
of unavailable seconds at the far-end receive link state machine. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17 |
||||||||||||||||||
|
tmnxBundleMemberImaNeTxNumFails indicates the number
of times that a near-end transmit alarm is set on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18 |
||||||||||||||||||
|
tmnxBundleMemberImaNeRxNumFails indicates the number
of times that a near-end receive alarm is set on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19 |
||||||||||||||||||
|
tmnxBundleMemberImaFeTxNumFails indicates the number
of times that a far-end transmit alarm is set on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20 |
||||||||||||||||||
|
tmnxBundleMemberImaFeRxNumFails indicates the number
of times that a far-end receive alarm is set on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21 |
||||||||||||||||||
|
tmnxBundleMemberImaTxIcpCells indicates the number
of ICP cells that have been transmitted on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22 |
||||||||||||||||||
|
tmnxBundleMemberImaRxIcpCells indicates the number
of ICP cells that have been received on the IMA link. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23 |
||||||||||||||||||
|
tmnxBundleMemberImaErrorIcpCells indicates the number
of ICP cells with HEC or CRC-10 errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24 |
||||||||||||||||||
|
tmnxBundleMemberImaLstRxIcpCells indicates the number
of lost ICP cells at the expected offset. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25 |
||||||||||||||||||
|
tmnxBundleMemberImaOifAnomalies indicates the number
of OIF anomalies at the near-end. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26 |
||||||||||||||||||
|
tmnxBundleMemberImaRxTestState indicates the current
state of the test pattern on this link. |
TmnxImaTestState Type Values:
Description: The TmnxImaTestState indicates the current state of the test pattern procedure. |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27 |
||||||||||||||||||
|
tmnxBundleMemberImaRxTestPattern indicates the received
test pattern value on this link. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28 |
||||||||||||||||||
|
tmnxBundleMemberImaRelDelay indicates the latest measured
delay on this member link relative to the member link with the least delay within the same IMA group |
millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29 |
tmnxDS1PortTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.23
·
1 row entry
·
6 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDS1PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDS1PortTable'
The tmnxDS1PortTable has an entry for a DS1 physical port.
Each row entry represents a physical DS1 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tm…
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tm…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxDS1PortBuildout configures the cable buildout length. A ds1 port
has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable l… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1 |
||||||||||||
|
The tmnxDS1PortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2 |
||||||||||||
|
tmnxDS1PortType configures the type of the physical port to 'ds1',
'e1' or 'j1'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3 |
||||||||||||
|
tmnxDS1PortLineLength configuration only applies to a ds1 port
configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4 |
||||||||||||
|
tmnxDS1PortLbo configuration only applies to a ds1 port
configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5 |
||||||||||||
|
tmnxDS1PortDbGain only applies to a ds1 port configured with a
'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss. |
dbSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6 |
.1.3.6.1.4.1.6527.3.1.2.2.4.24
·
1 row entry
·
21 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortSchedOverrideTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortSchedOverrideTable'
The tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system.
Each row represents a particular port-scheduler override. Entries
are created and deleted by the user.
are created and deleted by the user.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxPortSchedOverrideRowStatus is used for the
creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty s… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideSchedName indicates the name
of the port scheduler policy that this row entry overrides. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLastChanged indicates the value
of sysUpTime at the time of the most recent management change to this row. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideMaxRate specifies the explicit
maximum frame based bandwidth limit. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl1PIR specifies the total
bandwidth limit, PIR, for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir
bandwidth limit for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl2PIR specifies the total
bandwidth limit, PIR, for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir
bandwidth limit for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl3PIR specifies the total
bandwidth limit, PIR, for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir
bandwidth limit for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl4PIR specifies the total
bandwidth limit, PIR, for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir
bandwidth limit for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl5PIR specifies the total
bandwidth limit, PIR, for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir
bandwidth limit for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl6PIR specifies the total
bandwidth limit, PIR, for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir
bandwidth limit for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl7PIR specifies the total
bandwidth limit, PIR, for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir
bandwidth limit for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl8PIR specifies the total
bandwidth limit, PIR, for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir
bandwidth limit for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20 |
||||||||||||||||||||||||||||||||||
|
The value of tmnxPortSchedOverrideFlags specifies the set of
attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribut… |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21 |
tmnxBPGrpAssocTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.25
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBPGrpAssocTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBPGrpAssocTable'
The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system.
Each row displays the relationship between a Bundle Protection
group and its working and protection bundle.
group and its working and protection bundle.
| Column | Syntax | OID |
|---|---|---|
|
tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value
of zero is given if no working bundle is associated with the given tmnxBundleBundleID. |
TmnxBundleID Description: A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1 |
|
tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value
of zero is given if no protection bundle is associated with the given tmnxBundleBundleID. |
TmnxBundleID Description: A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2 |
|
tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered
the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active. |
TmnxBundleID Description: A TmnxBundleID is an unique 32 bit number encoded as shown below. |32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1| +-----+-------+-------+-------+-----------+-------+ |001 | slot | mda | 0 | bndl t… |
.1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3 |
tmnxBundleMlpppTable
table.1.3.6.1.4.1.6527.3.1.2.2.4.26
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxBundleMlpppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxBundleMlpppTable'
The tmnxBundleMlpppTable contains MLPPP specific data.
Each row entry contains data on an MLPPP Bundle.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator
identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. |
OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1 |
||||||||||||
|
tmnxBundleMlpppEndpointIDClass specifies the Link Control
Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this … |
TmnxMlpppEndpointIdClassr/w Type Values:
Description: TmnxMlpppEndpointIdClass indicates the MLPPP Endpoint Discriminator Class Field Type. |
.1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2 |
||||||||||||
|
The value of tmnxBundleMlpppClassCount specifies
whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP … |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3 |
||||||||||||
|
tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile
to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxB… |
ALCATEL-ENT1-TIMETRA-TC-MIBTMlpppQoSProfileIdr/w Type Constraints: range: 0..65535Description: This textual-convention uniquely identifies MLPPP Bundle QoS profile in the ingress and egress MLPPP QoS profile tables. The value 0 indicates default MLPPP QoS Profile as applicable to a given H/W |
.1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4 |
||||||||||||
|
tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile
to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks … |
ALCATEL-ENT1-TIMETRA-TC-MIBTMlpppQoSProfileIdr/w Type Constraints: range: 0..65535Description: This textual-convention uniquely identifies MLPPP Bundle QoS profile in the ingress and egress MLPPP QoS profile tables. The value 0 indicates default MLPPP QoS Profile as applicable to a given H/W |
.1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31
·
1 row entry
·
53 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxDigitalDiagMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxDigitalDiagMonitorTable'
The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
Each row represents a particular SFP/XFP that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tmnxDDMTemperature indicates the current temperature
of the SFP/XFP in degrees Celsius. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTempLowWarning indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a low-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTempLowAlarm indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a low-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTempHiWarning indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a hi-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTempHiAlarm indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMSupplyVoltage indicates the current supply
voltage of the SFP/XFP in micro-Volts (uV). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxOutputPower indicates the current Output
Power of the SFP/XFP in micro-Watts (uW). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a low-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in micro-Watts (uW). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMRxOpticalPowerType indicates whether the
tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1 indicates the Manufacturer specific
Auxiliary 1 information of the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific
Auxiliary 1 low-warning threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific
Auxiliary 1 low-alarm threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific
Auxiliary 1 hi-warning threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific
Auxiliary 1 hi-alarm threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux1Type indicates the measurement type of
the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2 indicates the Manufacturer specific
Auxiliary 2 information of the SFP/XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific
Auxiliary 2 low-warning threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific
Auxiliary 2 low-alarm threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific
Auxiliary 2 hi-warning threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific
Auxiliary 2 hi-alarm threshold for the XFP. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMAux2Type indicates the measurement type of
the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMFailedThresholds indicates which objects
of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExternallyCalibrated indicates whether the
SFP was externally calibrated (true) or internally calibrated (false). |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTxLaserBiasSlope indicates the
Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTxLaserBiasOffset indicates the
Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Integer32 Constraints: range: -32767-32768 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTxPowerSlope indicates the
Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTxPowerOffset indicates the
Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Integer32 Constraints: range: -32767-32768 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTemperatureSlope indicates the
T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalTemperatureOffset indicates the
T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Integer32 Constraints: range: -32767-32768 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
Integer32 Constraints: range: -32767-32768 |
.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53 |
tmnxFRDlcmiTable
table.1.3.6.1.4.1.6527.3.1.2.2.9.1
·
1 row entry
·
12 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxFRDlcmiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxFRDlcmiTable'
The tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port.
The Parameters for a particular Data Link Connection
Management Interface. Entries cannot be created and
deleted via SNMP SET operations.
Management Interface. Entries cannot be created and
deleted via SNMP SET operations.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
tmnxFRDlcmiMode is used to set the mode of the interface.
It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1 |
||||||
|
tmnxFRDlcmiN392Dce is used to configure the LMI error
threshold for DCE interface. |
Integer32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2 |
||||||
|
tmnxFRDlcmiN393Dce is used to configure the LMI monitored
event count for DCE interface. |
Integer32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3 |
||||||
|
tmnxFRDlcmiT392Dce is used to configure the polling verification
timer for the Frame Relay DCE interface. |
secondsInteger32r/w Constraints: range: 5-30 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4 |
||||||
|
tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages transmitted on this Frame Relay interface. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5 |
||||||
|
tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages received on this Frame Relay interface. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6 |
||||||
|
tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times
the LMI agent did not receive a Status Enquiry message within the allotted time. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7 |
||||||
|
tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status
messages transmitted on this Frame Relay interface. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8 |
||||||
|
tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status
messages received on this Frame Relay interface. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9 |
||||||
|
tmnxFRDlcmiStatusMsgTimeouts indicates the number of times
the LMI agent did not receive a Status message within the allotted time. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10 |
||||||
|
tmnxFRDlcmiDiscardedMsgs indicates the number of times
the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid. |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11 |
||||||
|
tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times
the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the … |
messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12 |
tmnxQosPoolAppTable
table.1.3.6.1.4.1.6527.3.1.2.2.10.2
·
1 row entry
·
8 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxQosPoolAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxQosPoolAppTable'
This table maintains associations of the buffer pools with the individual objects.
This entry maintains the specifics about the association of a
buffer pool and an object.
buffer pool and an object.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The object tmnxObjectType defines the type of object to which the
pool is being setup for. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1 |
||||||||||||
|
tmnxObjectId is used to identify the specific object. If
tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the descri… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2 |
||||||||||||
|
The object tmnxObjectAppType specifies the nature of usage the pool
would be used for. The pools could be used for access or network traffic at either ingress or egress. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3 |
||||||||||||
|
tmnxObjectAppPool specifies the name of the pool to be used/created.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4 |
||||||||||||
|
The object tmnxObjectAppPoolRowStatus is used to create or remove a
pool application to the object. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5 |
||||||||||||
|
The percentage of pool size reserved for CBS. The value '-1'
implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For '… |
Integer32r/w Constraints: range: -1-100 |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6 |
||||||||||||
|
tmnxObjectAppSlopePolicy specifies the slope policy being used for
this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7 |
||||||||||||
|
Size in percentage of buffer space. The value '-1' implies that
the pool size should be computed as per fair weighing between all other pools. |
Integer32r/w Constraints: range: -1-100 |
.1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8 |
tmnxATMIntfTable
table.1.3.6.1.4.1.6527.3.1.2.2.11.1
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxATMIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxATMIntfTable'
The tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters.
The Parameters for a particular ATM Cell
Management Interface. Entries cannot be created or
deleted via SNMP SET operations.
Entries will exist in this table when ATM encapsulation
is configured on the port/channel.
Management Interface. Entries cannot be created or
deleted via SNMP SET operations.
Entries will exist in this table when ATM encapsulation
is configured on the port/channel.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tmnxATMIntfCellFormat is used to set the cell format
(UNI or NNI) that is to be used on the ATM interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1 |
||||
|
tmnxATMIntfMinVpValue is used to set the minimum
allowable VPI value that can be used on the ATM interface for a VPC. |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2 |
||||
|
The value of tmnxATMIntfMapping specifies the cell
mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1
·
1 row entry
·
9 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortNetIngressStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortNetIngressStatsTable'
Defines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic.
Defines an entry in tmnxPortNetIngressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.
created and deleted by the system depending on the queue policy
being used at the specific port.
| Column | Syntax | OID |
|---|---|---|
|
tmnxPortNetIngressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system. |
ALCATEL-ENT1-TIMETRA-TC-MIBTQueueId Constraints: range: 1-16Description: The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP t… |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1 |
|
tmnxPortNetIngressFwdInProfPkts indicates the number of conforming
network ingress packets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2 |
|
tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding
network ingress packets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3 |
|
tmnxPortNetIngressFwdInProfOcts indicates the number of conforming
network ingress octets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4 |
|
tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding
network ingress octets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5 |
|
tmnxPortNetIngressDroInProfPkts indicates the number of conforming
network ingress packets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6 |
|
tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding
network ingress packets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7 |
|
tmnxPortNetIngressDroInProfOcts indicates the number of conforming
network ingress octets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8 |
|
tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding
network ingress octets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2
·
1 row entry
·
9 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxPortNetEgressStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxPortNetEgressStatsTable'
Defines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
Defines an entry in tmnxPortNetEgressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.
created and deleted by the system depending on the queue policy
being used at the specific port.
| Column | Syntax | OID |
|---|---|---|
|
tmnxPortNetEgressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system. |
ALCATEL-ENT1-TIMETRA-TC-MIBTQueueId Constraints: range: 1-8Description: The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP t… |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1 |
|
tmnxPortNetEgressFwdInProfPkts indicates the number of conforming
network egress packets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2 |
|
tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding
network egress packets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3 |
|
tmnxPortNetEgressFwdInProfOcts indicates the number of conforming
network egress octets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4 |
|
tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding
network egress octets forwarded on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5 |
|
tmnxPortNetEgressDroInProfPkts indicates the number of conforming
network egress packets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6 |
|
tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding
network egress packets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7 |
|
tmnxPortNetEgressDroInProfOcts indicates the number of conforming
network egress octets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8 |
|
tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding
network egress octets dropped on this port using this queue. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9 |
tmnxCiscoHDLCStatsTable
table.1.3.6.1.4.1.6527.3.1.2.2.12.3
·
1 row entry
·
6 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxCiscoHDLCStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxCiscoHDLCStatsTable'
The tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port.
An entry in the tmnxCiscoHDLCStatsTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
tmnxCiscoHDLCDiscardStatInPkts indicates the number of
inbound Cisco HDLC packets discarded. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1 |
|
tmnxCiscoHDLCDiscardStatOutPkts indicates the number of
outbound Cisco HDLC packets discarded. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2 |
|
tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco
HDLC packets. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3 |
|
tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco
HDLC packets. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4 |
|
tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco
HDLC octets. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5 |
|
tmnxCiscoHDLCStatOutOctets indicates the number of outbound
Cisco HDLC octets. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6 |
tmnxMcMlpppStatsTable
table.1.3.6.1.4.1.6527.3.1.2.2.12.4
·
1 row entry
·
7 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tmnxMcMlpppStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-PORT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-PORT-MIB::tmnxMcMlpppStatsTable'
Defines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic.
Defines an entry in tmnxMcMlpppStatsTable. Entries are
created and deleted by the system depending on the number of
classes being used by a given MLPPP bundle.
created and deleted by the system depending on the number of
classes being used by a given MLPPP bundle.
| Column | Syntax | OID |
|---|---|---|
|
tmnxMcMlpppClassIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system. |
TmnxMcMlpppClassIndex Type Constraints: range: 0..15Description: The TmnxMcMlpppClassIndex indicates the class of a Multiclass MLPPP bundle. For Multiclass MLPPP bundles with a non-zero tmnxBundleMlpppClassCount of classes, class index takes valid values from 0 to (tmnxB… |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1 |
|
The value of tmnxMcMlpppStatsIngressOct indicates the total
number of octets in all packets received on the bundle for the given class on ingress before reassembly. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2 |
|
The value of tmnxMcMlpppStatsIngressPkt indicates the total
number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3 |
|
The value of tmnxMcMlpppStatsIngressErrPkt indicates the total
number of packets discarded due to reassembly errors on the bundle for the given class on ingress. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4 |
|
The value of tmnxMcMlpppStatsEgressOct indicates the total
number of octets in all packets received on the bundle for the given class on egress before segmentation. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5 |
|
The value of tmnxMcMlpppStatsEgressPkt indicates the total
number of packets forwarded on the bundle for the given class on egress towards the line. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6 |
|
The value of tmnxMcMlpppStatsEgressErrPkt indicates the total
number of packets discarded due to segmentation errors on the bundle for the given class on egress. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7 |