ALCATEL-ENT1-PIM-MIB

        This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
        
    This proprietary MIB contains management information for 
    the configuration of PIM-SM and PIM-DM global configuration 
    parameters.
        
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
        
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
        
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
        
            Copyright (C) 1995-2007 Alcatel-Lucent
            Copyright (C) 2015 ALE USA, Inc.
                ALL RIGHTS RESERVED WORLDWIDE
    
Source file
ALCATEL-ENT1-PIM-MIB
Last revised
Identity
alcatelIND1PIMMIB
Base OID
1.3.6.1.4.1.6486.801.1.2.1.10.6.1
Imported Objects
ALCATEL-ENT1-BASE routingIND1Pim
INET-ADDRESS-MIB InetAddress InetAddressPrefixLength InetAddressType
PIM-STD-MIB pimInterfaceEntry
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC RowStatus TruthValue
Net-SNMP examples using the alcatel-ent1 MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-ENT1-PIM-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-ENT1-PIM-MIB::alcatelIND1PIMMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PIM-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PIM-MIB::alcatelIND1PIMMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (58)
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.0
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10
secondsInteger32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12
secondsUnsigned32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.15
OctetString
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.16
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.17
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.18
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.19
Integer32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.20
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.21
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.22
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.24
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.25
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26
secondsInteger32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5
Integer32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.1
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.2
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.3
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.4
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.1
OctetString
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.2
Unsigned32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.3
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.4
Unsigned32
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.5
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5.1.6
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.2
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.3
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.4
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.5.1.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.6
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.7
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.8
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.3.9
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2
Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (5)
A collection of objects to support management of global
configuration parameters of PIM Sparse Mode routers.
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.1
A collection of objects to support management of global
configuration parameters of PIM Dense Mode routers.
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.2
A collection of objects to support management of global
configuration parameters of PIM routers.
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.3
PIM objects to stop the tools from complaining
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.4
PIM Notification objects
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2.5
Compliance Statements (2)

OID .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1.1
The compliance statement for routers running PIM Sparse
Mode and implementing the ALCATEL-IND1-PIM MIB.
Required groups

OID .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1.2
The compliance statement for routers running PIM Dense
Mode and implementing the ALCATEL-IND1-PIM MIB.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.0.1
An alaPimNonBidirHello notification signifies that
a bidir-capable router has received a PIM hello from
a non-bidir-capable router.

This notification is generated whenever the counter
alaPimsmNonBidirHelloMsgsRcvd is incremented, subject
to the rate limit specified by
alaPimsmNonBidirHelloNotificationPeriod.