ALCATEL-ENT1-OSPF3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

alaOspf3RouteTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaOspf3RouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-OSPF3-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-OSPF3-MIB::alaOspf3RouteTable' 
OSPF3 Routing table. This table contains
an entry for each valid OSPF unicast route that
can be used for packet forwarding determination.
It is for display purposes only.
alaOspf3RouteEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1
A routing entry.
Indexes
Column Syntax OID
alaOspf3RouteDest
The destination IPv6 address of this route.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.1
alaOspf3RoutePfxLength
Indicates the prefix length of the destination
address.
bitsInteger32
Constraints:
range: 0-128
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.2
alaOspf3RouteNextHop
On remote routes, the address of the next
system en route; otherwise, ::0
('00000000000000000000000000000000'H in ASN.1
string representation).
IPV6-TCIpv6Address
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.3
alaOspf3RouteIfIndex
The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached.
IPV6-TCIpv6IfIndexOrZero
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.4
alaOspf3RouteType
The type of this route.
Enumeration
Enumerated Values:
1host
2other
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.5
alaOspf3RoutePathType
The routing metric path type for this route.
Enumeration
Enumerated Values:
1intraArea
2interArea
3externalType1
4externalType2
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.6
alaOspf3RouteMetric1
The primary routing metric for this route.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.7
alaOspf3RouteMetric2
An alternate routing metric for this route. It's 0
for internal routes. For an external route, it's the metric
to reach the ASBR that announced the external route.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.8

alaOspf3IfAugTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaOspf3IfAugTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-OSPF3-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-OSPF3-MIB::alaOspf3IfAugTable' 
Expansion for ospf3IfTable
alaOspf3IfAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1
An entry of alaOspf3IfAugTable
Indexes
No indexes recorded
Column Syntax OID
alaOspf3IfBfdStatus
Enables/Disables OSP3F for a BFD interface
Enumerationr/w
Enumerated Values:
1enable
2disable
Constraints:
range: 0-160
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.1
alaOspf3IfBfdDrsOnly
Enables/Disables Drs Only option for a BFD interface
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.2

alaOspf3AreaAugTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaOspf3AreaAugTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-OSPF3-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-OSPF3-MIB::alaOspf3AreaAugTable' 
This table extends the ofpv3 area table and it is used to 
display very granular LSA Counts, Host and Interface counts
alaOspf3AreaAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1
An entry of alaOspf3AreaAugTable
Indexes
No indexes recorded
Column Syntax OID
alaOspf3AreaRouterLsaCount
This object indicates the Router LSA Count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.1
alaOspf3AreaNetworkLsaCount
This object indicates the Network LSA Count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.2
alaOspf3AreaIntraAreaPrefixLsaCount
This object indicates the Intra Area LSA Count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.3
alaOspf3AreaInterAreaPrefixLsaCount
This object indicates the Inter area LSA Count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.4
alaOspf3AreaInterAreaRouterLsaCount
This object indicates the inter area Router LSA Count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.5
alaOspf3AreaHostCount
This object indicates the host count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.6
alaOspf3AreaInterfaceCount
This object indicates the Interface count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.7
alaOspf3AreaSummarizationRangeCount
This object indicates the summarization range count.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.8