ALCATEL-ENT1-OPENFLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
33

alaOpenflowLogicalSwitchTable

table
.1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2 · 1 row entry · 16 columns
Open in standard view 
This table contains one row for each Logical Switch.
alaOpenflowLogicalSwitchEntry entry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1
Information about the Openflow Logical Switches.
Indexes
alaOpenflowLogicalSwitch
Column Syntax OID
alaOpenflowLogicalSwitch
Openflow Logical Switch Name.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.1
alaOpenflowLogicalSwitchAdminState
Logical Switch Admin State. Enable or disable the Logical Switch.
When disabled, all controllers for the Logical Switch will be
operationally disabled and flows added by those controllers will
be removed.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.2
alaOpenflowLogicalSwitchMode
Openflow Logical Switch Mode. Normal is regular Openflow,
API is for ACL-like flow operation. Only one Logical Switch
can be in api mode at a time.
PFC-Channel mode is to indicate the Logical Switch
is operating in …
Enumerationr/w
Enumerated Values:
1normal
2api
3pfcChannel
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.3
alaOpenflowLogicalSwitchVersions
Openflow Logical Switch Bitmap of enabled Openflow versions.
At least one version must be enabled.
Bitsr/w
Enumerated Values:
0v1dot0
1v1dot3dot1
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.4
alaOpenflowLogicalSwitchVlan
Openflow Logical Switch VLAN. The value 0 indicates that no
VLAN has been specified, it is not a valid value to write.
This object is not valid to write when creating/modifying an
entry with alaOpenflowLogicalSwitchMode…
Integer32r/w
Constraints:
range: 2-4093
range: 0-0
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.5
alaOpenflowLogicalSwitchControllerCount
Count of the configured controllers for the Logical Switch.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.6
alaOpenflowLogicalSwitchInterfaceCount
Count of the configured interfaces (ports and link aggregations) for the Logical Switch.
Integer32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.7
alaOpenflowLogicalSwitchFlowCount
Count of the flows pushed to the Logical Switch by its controllers.
Integer32
Constraints:
range: 0-511
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.8
alaOpenflowLogicalSwitchRowStatus
Deleting a row from this table will also remove associated entries from other tables in this mib
that have a logical switch as part of their index.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.9
alaOpenflowLogicalSwitchLearnedMacUpdate
This object is only applicable to Logical Switches in api(2) mode.
When enabled(1), learned MACs will be forwarded to controllers
via a Packet-In message.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.10
alaOpenflowLogicalSwitchProbeTime
Probe-time for a logical switch in the pfc-channel mode in seconds,
which will override the existing global idle-probe-time for sending
echo-request to the OpenFlow Controller.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.11
alaOpenflowLogicalSwitchFailureDetectTime
Failure detect time, in seconds, is configured for a logical switch
in the pfc-channel mode for detecting disconnection to the
OpenFlow Controller if there was no echo reply or message from the controller.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.12
alaOpenflowLogicalSwitchDPID
An unique 8 bytes DPID for a logical switch.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.13
alaOpenflowLogicalSwitchTableMissAction
The action to be taken when an Openflow Table Miss occurs. When set to drop
if any packet has a table miss, it will be dropped. If set to controller
it will be forwarded to the controller.
Enumerationr/w
Enumerated Values:
1drop
2controller
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.14
alaOpenflowLogicalSwitchTCPBufferSizeTx
TCP send buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers
in the logical switch.
Kilo BytesUnsigned32r/w
Constraints:
range: 2-32
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.15
alaOpenflowLogicalSwitchTCPBufferSizeRx
TCP receive buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers
in the logical switch.
Kilo BytesUnsigned32r/w
Constraints:
range: 2-32
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.16

alaOpenflowControllerTable

table
.1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3 · 1 row entry · 9 columns
Open in standard view 
This table contains one row for each controller on each logical switch.
Currently, up to three controllers per logical switch are supported per logical switch.
alaOpenflowControllerEntry entry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1
Information about the Openflow Controllers attached to Logical Switches.
Indexes
alaOpenflowControllerLogicalSwitch alaOpenflowControllerIpType alaOpenflowControllerIp alaOpenflowControllerPort
Column Syntax OID
alaOpenflowControllerLogicalSwitch
Openflow Logical Switch Name.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.1
alaOpenflowControllerIpType
Openflow Controller IP Address Type. The only type currently supported is ipv4(1)
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.2
alaOpenflowControllerIp
Openflow Controller IP Address. As specified by alaOpenflowControllerIpType,
only ipv4 is currently supported
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.3
alaOpenflowControllerPort
Openflow Controller Port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.4
alaOpenflowControllerRole
Role of the Controller for the Logical Switch. The role is negotiated by the
controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers
will always have the role of equal. Only one controller per Lo…
Enumeration
Enumerated Values:
1equal
2master
3slave
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.5
alaOpenflowControllerAdminState
Controller Admin State. Enable or disable connection to the controller.
The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc
continues unaffected when the controller is administratively disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.6
alaOpenflowControllerOperState
State of the Logical Switch connection to the Controller.
Enumeration
Enumerated Values:
1invalid
2disabled
3sendError
4init
5connecting
6backoff
7exchangingHello
8active
9idle
10disconnected
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.7
alaOpenflowControllerRowStatus
On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.8
alaOpenflowControllerPriority
Openflow Controller Priority. Priority value of 0 implies highest pririoty and 2 implies lowest.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.9

alaOpenflowInterfaceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4 · 1 row entry · 6 columns
Open in standard view 
This table contains one row for each interface (port or link aggregation) assigned to
a logical switch. An interface can only belong to one logical switch at a time.
If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it;
instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch.
Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch
(by adding it to that normal mode logical switch) but not directly reassigned from one normal mode
logical switch to another normal mode logical switch.
alaOpenflowInterfaceEntry entry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1
Information about the interfaces assigned to Openflow Logical Switches.
Indexes
alaOpenflowInterfaceLogicalSwitch alaOpenflowInterface
Column Syntax OID
alaOpenflowInterfaceLogicalSwitch
Openflow Logical Switch Name.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.1
alaOpenflowInterface
Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values,
Link Aggregations start at 32769.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.2
alaOpenflowInterfaceMode
Openflow Interface Mode. Normal is regular Openflow,
API is for ACL like flow operation and PFC-Channel is for NEC OFC.
Enumeration
Enumerated Values:
1normal
2api
3pfcChannel
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.3
alaOpenflowInterfaceRowStatus
On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.4
alaOpenflowInterfaceType
Openflow Interface Type.
Enumerationr/w
Enumerated Values:
1trunk
2access
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.5
alaOpenflowInterfaceNativeVlan
Native VLAN for Openflow Interface.
Unsigned32r/w
Constraints:
range: 2-4093
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.6

alaOpenflowInterfaceVlanTable

table
.1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5 · 1 row entry · 2 columns
Open in standard view 
This table contains a list of Tag VLANs for an OpenFlow Interface (port or link-aggregation) Entry.
logical switch belongs to.
alaOpenflowInterfaceVlanEntry entry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1
Information about the Tag VLANs associated with an OpenFlow Interface.
Indexes
alaOpenflowInterfaceLogicalSwitch alaOpenflowInterface alaOpenflowInterfaceVlanVlanID
Column Syntax OID
alaOpenflowInterfaceVlanVlanID
Tag VLAN for an Openflow Interface.
Unsigned32
Constraints:
range: 2-4093
range: 0-0
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1.1
alaOpenflowInterfaceVlanRowStatus
On create, the specified logical switch interface must exist in alaOpenflowInterfaceTable,
otherwise an entry creation in this table would not be allowed. Deletion of an interface entry in
alaOpenflowInterfaceTable wou…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.5.1.2