ALCATEL-ENT1-INLINE-POWER-MIB Table View

A table of objects that augments the standard pethPsePortTable
entry.

alaPethPsePortEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1

A set of objects that display and control the power
characteristics of a power Ethernet PSE port.

Indexes

No indexes recorded

Column	Syntax	OID
alaPethPsePortPowerMaximum This object controls maximum amount of power per port.	Integer32r/w Constraints: range: 3000-95000	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.1
alaPethPsePortPowerActual This object contains the actual amount of power used by a port	Integer32 Constraints: range: 0-95000	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.2
alaPethPsePortPowerStatus This object contains the power status of a port	Enumeration Enumerated Values: 1 powerOn 2 powerOff 3 searching 4 fault 5 test 6 denied 7 badVoltInj	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.3
alaPethPsePortPowerClass This object controls class of poe device attached on a port. class0 - The device can draw PD power from 0.44W to 12.95W and current less than 5.0 mA. class1 - The device can draw PD power from 0.44W to 3.84W an…	Enumeration Enumerated Values: 0 class0 1 class1 2 class2 3 class3 4 class4 5 class5 6 classStop 7 classUnknown 8 portNotPowered 9 classDetectDisabled 10 niNotPowered	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.4
alaPethPsePort4PairStatus The object is used to enable or disable port as 4pair or 2pair port. Enabling will set the port as 4pair port and disabling will set the port as 2pair port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.5
alaPethPsePortPowerOverHdmi The object is used to enable or disable power over HDMI.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.6

This table augments the standard table PethMainPseTable by allowing the
admin status for a group to be set to on/off as well as
showing the values for the max power for that group.

alaPethMainPseEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1

A set of objects that display and control the Main power
of a PSE.

Indexes

No indexes recorded

Column	Syntax	OID
alaPethMainPseAdminStatus The object is used to set the status of the main PSE to ON or OFF.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.1
alaPethMainPseMaxPower The maximum amount of power allowed for main PSE.	WattsInteger32r/w Constraints: range: 26-1800	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.2
alaPethMainPsePriorityDisconnect The object is used to set the priority disconnect of the main PSE to Enabled or Disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.3
alaPethMainPseCapacitorDetect The object is used to enable or disable the PowerDsine Capacitor detection method.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.4
alaPethMainPsePriority The object is set the power down priority for the slot	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.5
alaPethMainPseComboPort The object is used to set the combo port option of the main PSE to Enable or Disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.6
alaPethMainPseClassDetection The object is used to set the class detection of the main PSE to Enabled or Disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.7
alaPethMainPseDot3bt The object is used to set the IEEE802.3BT of the main PSE to enabled or disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.8

A table of objects that display and control power 
characteristics per chassis.

alaPethMainChassisEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1

A set of objects that display and control the power
characteristics of a power Ethernet PSE chassis.

Indexes

alaPethMainChassisId

Column	Syntax	OID
alaPethMainChassisId The virtual chassis ID for this entry.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.1
alaPethMainChassisPowerRedundancy This object controls power supply redundancy for the power Ethernet PSE slots in a chassis.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.2
alaPethMainChassisDynamicPowerManagement This object controls dynamic power management for Ethernet PSE slots in a chassis.	Enumerationr/w Enumerated Values: 1 flat 2 nipri 3 dynamic	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.3
alaPethMainChassisNumberOfPowerSupply The number of power supplies this chassis.	scalerInteger32 Constraints: range: 1-8	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.4
alaPethMainChassisAvailableReservePower Available reserve power this chassis.	wattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1.5

A list of lanpower power rules that define specific
times at which to power on/off port(s) associated
in alaPethPowerPortTable with a policy defined in
alaPethPowerPolicyTable.

alaPethPowerRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1

A lanpower power rule to be bound to a policy.

Indexes

alaPethPowerRuleName

Column	Syntax	OID
alaPethPowerRuleName The name of the power policy rule of this entry.	SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 1-32	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.1
alaPethPowerRuleAdminStatus Whether this policy rule is enforced when enabled(1) or ignored when disabled(2).	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.2
alaPethPowerRulePowerStatus Whether to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.3
alaPethPowerRuleAtMinute At what minute of every hour (0..59) to power on/off the port(s) associated with the lanpower policy this rule is bound to. The value -1 is for Not Applicable. Mutually exclusive with alaPethPowerRuleAtTime; a set …	minutesInteger32r/w Constraints: range: -1-59	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.4
alaPethPowerRuleAtTime At what time minute of the day (0..1439), to power on/off the port(s) associated with the lanpower policy this rule is bound to. The value -1 is for Not Applicable. Mutually exclusive with alaPethPowerRuleAtMinute; a…	minutesInteger32r/w Constraints: range: -1-1439	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.5
alaPethPowerRuleDaysOfWeek On which days of the week to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Mutually exclusive with alaPethPowerRuleDaysOfMonth; a set of either will automatically set the o…	Bitsr/w Enumerated Values: 0 sun 1 mon 2 tue 3 wed 4 thu 5 fri 6 sat	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.6
alaPethPowerRuleDaysOfMonth On which days of the month to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Mutually exclusive with alaPethPowerRuleDaysOfWeek; a set of either will automatically set the o…	Bitsr/w Enumerated Values: 0 d1 1 d2 2 d3 3 d4 4 d5 5 d6 6 d7 7 d8 8 d9 9 d10 10 d11 11 d12 12 d13 13 d14 14 d15 15 d16 16 d17 17 d18 18 d19 19 d20 20 d21 21 d22 22 d23 23 d24 24 d25 25 d26 26 d27 27 d28 28 d29 29 d30 30 d31	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.7
alaPethPowerRuleMonths On which months to power on(1) or off(2) the port(s) associated with the lanpower policy this rule is bound to. Default is every month.	Bitsr/w Enumerated Values: 0 jan 1 feb 2 mar 3 apr 4 may 5 jun 6 jul 7 aug 8 sep 9 oct 10 nov 11 dec	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.8
alaPethPowerRuleTimezone The timezone to use when activating the rule minute/time. localServer(1) is the time given by the local server, originatorServer(2) is the time given by the originator server (which may or may not be the localServer) an…	Enumerationr/w Enumerated Values: 1 localServer 2 originatorServer 3 utc	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.9
alaPethPowerRuleRowStatus Create or delete a lanpower policy rule.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.4.1.10

A list of lanpower power policies to which
rules defined in alaPethPowerRuleTable are
bound to. Rules schedule power on/off of ports
associated with policies defined in alaPethPowerPortTable.

alaPethPowerPolicyEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1

A power policy to which a rule is bound.

Indexes

alaPethPowerPolicyName alaPethPowerRuleName

Column	Syntax	OID
alaPethPowerPolicyName The name of the power policy of this entry.	SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 1-32	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1.1
alaPethPowerPolicyRowStatus Create or delete a lanpower policy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.5.1.2

A list of lanpower ports associated with a policy
defined in alaPethPowerPolicyTable to which rules
defined in alaPethPowerRuleTable are bound to.
Rules schedule the power on/off of these ports.

alaPethPowerPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1

A port associated with a power policy.

Indexes

POWER-ETHERNET-MIBpethPsePortGroupIndex POWER-ETHERNET-MIBpethPsePortIndex

Column	Syntax	OID
alaPethPowerPortPolicyName The name of the power policy of this port. Cannot be modified - first delete entry with old name and then create entry with new name.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1.1
alaPethPowerPortRowStatus Create or delete a port lanpower policy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.6.1.2

A list of lanpower slots associated with a policy
defined in alaPethPowerPolicyTable to which rules
defined in alaPethPowerRuleTable are bound to.
Rules schedule the power on/off of these slots.

alaPethPowerSlotEntry row .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1

A slot associated with a power policy.

Indexes

POWER-ETHERNET-MIBpethPsePortGroupIndex

Column	Syntax	OID
alaPethPowerSlotPolicyName The name of the power policy defined in alaPethPowerPolicyTable to associate with this slot.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1.1
alaPethPowerSlotRowStatus Associate or disassociate slot to lanpower policy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.7.1.2