ALCATEL-ENT1-E-SERVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
16
Rows
16
Columns
98
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceSapProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceSapProfileTable'
A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined.
alaEServiceSapProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1
A E-Service Service Profile entry.
Column Syntax OID
A label given to uniquely identify this profile. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.1
The type of VLAN stacking operation to be performed on a customer frame entering
this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
frame before any existing 802.1Q tag. Translate (2) me…
Enumerationr/w
Enumerated Values:
1stackSVLAN
2translate
3changeCVLAN
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.2
The CVLAN ID to use when using the Change CVLAN treatment mode.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.3
This object describes the source of the value for the priority field of the SVLAN
802.1Q tag when pre-pended to the customer data frame.NotAssigned(0), MapInnerPtoOuterP (1) uses
the priority field of the incoming frame…
Enumerationr/w
Enumerated Values:
0notAssigned
1mapInnerPtoOuterP
2mapInnerDscpToOuterP
3fixedP
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.4
This object describes the value of the priority field of the 802.1Q SVLAN tag
pre-pended to customer data frames when the fixed priority mapping mode is selected.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.5
This object describes this limit of ingress bandwidth for the traffic to which
this profile is applied. If 0, no bandwidth limit is applied. This number represents
traffic in units of 1,000,000 bits per second. Note th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.6
This object describes the use of the bandwidth limit in how it is applied across
multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
to Shared (1), all the ports that are part of the SAP w…
Enumerationr/w
Enumerated Values:
0notApplicable
1shared
2notShared
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.7
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.8
This object describes this limit of egress bandwidth for each UNI
of the SAP to which this profile is applied. If 0, no bandwidth limit
is applied. This number represents traffic in units of Megabits per
second. Note t…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.9
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3 · 1 row entry · 24 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileTable'
A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined.
alaEServiceUNIProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1
A E-Service Service Profile entry.
Column Syntax OID
A label given to uniquely identify this profile. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.1
This object describes the behavior of the bridge in regards to the spanning tree
protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of t…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.2
This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the pr…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.3
This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the p…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.4
This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the p…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.5
This object describes the behavior of the bridge in regards to the GVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.6
This object describes the behavior of the bridge in regards to the Alcatel
propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the P…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.7
This object describes the behavior of the bridge in regards to the MVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.8
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.9
This object describes the behavior of the bridge in regards to the VTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol t…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.10
This object describes the behavior of the bridge in regards to the VLAN PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.11
This object describes the behavior of the bridge in regards to the UPLINK PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protoco…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.12
This object describes the behavior of the bridge in regards to the UDLD PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.13
This object describes the behavior of the bridge in regards to the PVST PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.14
This object describes the behavior of the bridge in regards to the PAGP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.15
This object describes the behavior of the bridge in regards to the LACP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol …
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.16
This object describes the behavior of the bridge in regards to the DTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol t…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.17
This object describes the behavior of the bridge in regards to the CDP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol t…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.18
This object specifies the tunnel MAC used to tunnel L2 protocol to NNI ports
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.19
This object describes the IEEEE Mac treatment
ieee-fwd-all (1) - Forwards all IEEE MAC's.
ieee-drop-all (2) - Discards all IEEE MAC's.
unknown (3) the type is not defined.
Enumerationr/w
Enumerated Values:
1ieeeFwdAll
2ieeeDropAll
3unknown
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.20
This object describes the behavior of the bridge in regards to the OAM PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol t…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.21
This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the p…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.22
This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel(1) is not supported.
Discard (2) causes the PDU of the protocol to be discarded
and not enter the pr…
AlaEServiceUNIProfileProtocolTreatmentr/w
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.23
This object describes the type of treatment being given to the IEEE 802.1AB PDU frames
received on the UNI. Default(1) means all IEEE 802.1AB PDU frames are being given default treatment.
Same(2) means all IEEE 802.1AB …
AlaEServiceUNIProfileProtocolTreatmentMode
Type Values:
1default
2same
3different
Description:
Describes the type of treatment being given to the IEEE 802.1AB PDU frames
received on the UNI. Default(1) means all IEEE 802.1AB PDU frames are being given default treatment.
Same(2) means all IEEE 802.1AB PDU frames a…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.24
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceTable'
A table that contains the services and their assigned SVLAN for the
E-Service feature.
alaEServiceEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1
The svlan/ipmvlan-port association.
Indexes
Column Syntax OID
A label given to uniquely identify this Service. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.1
The SVLAN number of the SVLAN chosen to the be transport for this service.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.2
The type of the vlan this service is going to attach to. When creating the service,
the type should match the vlanId specified in the request.
Enumerationr/w
Enumerated Values:
0unknown
1svlan
2ipmvlan
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.3
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a service. When
creating or deleting the service, the user needs to provide both
the svlan and the vlanty…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceSapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceSapTable'
A table that contains the Service Access Points (Sap) listed by ID.
This table is used to create, delete, and modify the SAP's profile
alaEServiceSapEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1
The list of SAP.
Column Syntax OID
A Number given to uniquely identify the SAP.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.1
A label given to uniquely identify the Service this SAP is for. Must
be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.2
The string identifying the SAP Profile this sap is to use. If specified, must match an existing
SAP Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.3
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a sap. When
creating the sap, the user needs to provide the service name in
the same set request.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceSapCvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceSapCvlanTable'
A table that contains the Service Access Points (Sap) where the CVLANs are bound
to their service.
alaEServiceSapCvlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1
The CVLAN to Sap binding.
Column Syntax OID
A Number given to uniquely identify this SAP.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.1
This object is the CVLAN ID that this binding is targeted at. The CVLAN ID
may be 0, which indicates an all or untagged only mapping type.
Integer32
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.2
This object is the mapping type that defines what CVLANs are mapped into this service.
Multiple mappings can be defined for CVLAN to service, however only one all (2) or
untaggedOnly (3) mapping entry can be created per…
Enumerationr/w
Enumerated Values:
1single
2all
3untaggedOnly
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.3
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a SAP.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServicePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServicePortTable'
A table that contains the ports used by the EService feature.  Both UNI and NNI
are listed here.
alaEServicePortEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1
The list of ports being used by EService.
Column Syntax OID
The IfIndex of this UNI or NNI Port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.1
The type of port for Vlan Stacking operation. uni (1) represents a customer facing
port on which traffic may enter the E-Service. nni (2) respresents a provider network
port over which the E-Service may be connected.
Enumerationr/w
Enumerated Values:
1uni
3nni
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.2
he TPID for this port if type is NNI. It is used for the incoming data
traffic parsing and it is substituted to the 802.1Q standard Tpid for
the outgoing data traffic. This is used for compatibility with other vendor
eq…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.3
The legacy STP BPDU treatment for this port if NNI. It defines the type of processing
applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
BPDUs with MAC address 01:80:c2:00:00:00 and…
Enumerationr/w
Enumerated Values:
0notApplicable
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.4
The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
applied to GVRP PDUs on network ports.
Enumerationr/w
Enumerated Values:
0notApplicable
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.5
The label of an existing UNI profile that which contains various properties to be
applied to this port if UNI.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.6
The Transparent Bridging status for the nni Port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.7
The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
applied to MVRP PDUs on network ports.
Enumerationr/w
Enumerated Values:
0notApplicable
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.8
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.9
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceSapUniTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceSapUniTable'
A table that contains the UNI that are bound to each SAP for classifying
traffic into each EService. Not that writing to this table may create
a new UNI.
alaEServiceSapUniEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1
The list of SAP-UNI bindings being used by EService.
Column Syntax OID
The SAP ID that is configured onto this port.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.1
The IfIndex of this UNI Port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.2
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.3
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceNniSvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceNniSvlanTable'
A table that contains the SVLANs bound to each NNI for use by the
EService feature.
alaEServiceNniSvlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1
The list of NNI-SVLAN bindings being used by EService.
Column Syntax OID
The IfIndex of this NNI Port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.1
The SVLAN bound to this port. SVLAN cannot be 1.
Integer32
Constraints:
range: 2-4094
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.2
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.3
The object is used to specify whether the VPA state is to
be controlled by an ERP or a STP. By default VPA state is
controlled by STP.
Enumerationr/w
Enumerated Values:
1stp
2erp
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.11 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileCustomL2ProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileCustomL2ProtocolTable'
A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined.
alaEServiceUNIProfileCustomL2ProtocolEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.11.1
A E-Service Service Profile entry.
Column Syntax OID
A label given to uniquely identify this profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.11.1.1
Tunnel (1) enables the PDU to be tunneled across the provider network.
Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network.
MAC-Tunnel (4) enables MAC-Tunneling.
Enumerationr/w
Enumerated Values:
1tunnel
2discard
4macTunnel
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.11.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.11.1.3
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceCustomL2ProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceCustomL2ProtocolTable'
A table that contains custom L2 protocol entries with name, MAC address, mask,
ether-type and ether sub-type.
alaEServiceCustomL2ProtocolEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1
An E-Service with custom L2 protocol entry.
Column Syntax OID
Name of the custom L2 protocol entry which is an identifier to this table.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.1
This object specifies the destination MAC address that needs L2 protocol handling.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.2
This object specifies the range of destination MAC address that needs
L2 protocol handling.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.3
Ether type value for generic ethertype.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.4
Sub-type value to specify ether sub-type.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.5
Source service access point value.
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
Description:
802.2 LLC SAP value, Source and Destination.
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.6
Destination service access point value.
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
Description:
802.2 LLC SAP value, Source and Destination.
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.7
Protocol identifier.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.8
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.12.1.9
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileL2CustomProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileL2CustomProtocolTable'
A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined.
alaEServiceUNIProfileL2CustomProtocolEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13.1
A E-Service Service Profile entry.
Column Syntax OID
The unique index value of a row in this table.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13.1.1
A label given to uniquely identify this profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13.1.2
Tunnel (1) enables the PDU to be tunneled across the provider network.
Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network.
MAC-Tunnel (4) enables MAC-Tunneling.
Enumerationr/w
Enumerated Values:
1tunnel
2discard
4macTunnel
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.13.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIPortL2ProtocolStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIPortL2ProtocolStatisticsTable'
A table, that contains UNI port L2 protocol frame statistics.
alaEServiceUNIPortL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1
An E-Service Service UNI port L2 protocol statistics entry associated with an L2 protocol and a port entry.
Column Syntax OID
Name of the L2 protocol entry. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.1
This object describes the total number of frames of this protocol received on this port and trapped to CPU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.2
This object describes the total number of frames of this protocol received on this port trapped to CPU and peered.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.3
This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC tunneled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.4
This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC de-tunneled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.5
This object specifies the source MAC address of last frame of this protocol on this port trapped to CPU
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.6
This object is used to clear the UNI port statistics of the interface.
Enumerationr/w
Enumerated Values:
1default
2reset
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.14.1.7
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.15 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceNNIPortL2ProtocolStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceNNIPortL2ProtocolStatisticsTable'
A table, that contains NNI port L2 protocol frame statistics.
alaEServiceNNIPortL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.15.1
An E-Service NNI port L2 protocol statistics entry associated with port.
Column Syntax OID
This object describes the total number of frames trapped to CPU with tunnel MAC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.15.1.1
This object describes the total number of discarded frames that are trapped to CPU with tunnel MAC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.15.1.2
This object is used to clear the NNI port statistics of the interface.
Enumerationr/w
Enumerated Values:
1default
2reset
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.15.1.3
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.16 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileL2ProtocolTotalStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileL2ProtocolTotalStatisticsTable'
A table, that contains UNI profile L2 protocol frame total RX statistics of all ports of the profile
alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.16.1
An E-Service UNI profile L2 protocol total RX statistics entry associated with all ports of the UNI profile.
Column Syntax OID
A label given to uniquely identify this profile. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.16.1.1
This object describes the total number of frames L2 protocol frames received by all the ports of bind to this profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.16.1.2
This object is used to clear the UNI profile statistics of the interface.
Enumerationr/w
Enumerated Values:
1default
2reset
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.16.1.3
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileCustomL2ProtocolStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileCustomL2ProtocolStatisticsTable'
A table, that contains UNI profile L2 protocol frame RX statistics of all ports of the profile.  Each entry
represents statistics collected for one protocol of the UNI profile.
alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17.1
An E-Service UNI profile L2 protocol RX statistics entry associated with all ports of the UNI profile.
Column Syntax OID
A label given to uniquely identify this profile. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17.1.1
Name of the L2 protocol entry. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17.1.2
This object describes the total number of frames of this protocol received on this port and trapped to CPU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17.1.3
This object describes the behavior of the bridge in regards to the destination Mac address
matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the
PDU to be tunneled across the provider…
AlaEServiceUNIProfileProtocolTreatment
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.17.1.4
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaEServiceUNIProfileL2ProtocolStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-E-SERVICE-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-E-SERVICE-MIB::alaEServiceUNIProfileL2ProtocolStatisticsTable'
A table, that contains UNI profile L2 well known protocol frame RX statistics of all ports of the profile
alaEServiceUNIProfileL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19.1
An E-Service UNI profile L2 well known protocol RX statistics entry associated with all ports of the UNI profile.
Column Syntax OID
A label given to uniquely identify this profile. Must be at least one character long.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19.1.1
This object specifies the well known protocol group this row corresponds to.
Enumeration
Enumerated Values:
1stp
2mvrp
3lldp
4amap
5lacpOamLacpMarker
6ieee802dot1x
7cisco
8taggedLldp
9untaggedLldp
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19.1.2
This object describes the number of frames this L2 well known protocol frames
received by all the ports of bind to this profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19.1.3
This object describes the behavior of the bridge in regards to the destination
MAC address matching with the L2 Custom protocol entry MAC address on the UNI.
Tunnel (1) enables the PDU to be tunneled across the provide…
AlaEServiceUNIProfileProtocolTreatment
Type Values:
1tunnel
2drop
3peer
4macTunnel
Description:
The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and no…
.1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.19.1.4