ALCATEL-ENT1-AAA-MIB Table View

This table shows current configuration for each AAA server.

aaaServerEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1

An AAA server configuration identified by its protocol
and its index. An entry is created/removed when a server
is defined or undefined with IOS configuration commands
via CLI or by issuing appropriate sets to this tabl…

Indexes

No indexes recorded

Column	Syntax	OID
aaasName Name of the server. This name is given by the operator to refer the server.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.1
aaasProtocol Protocol used with the server: radius(1) - RADIUS ldap(2) - LDAP ace(3) - ACE tacacs(4) - TACACS+	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.2
aaasHostName DNS name of the server host.	OctetStringr/w Constraints: range: 0-3650	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.3
aaasIpAddress IP address of the server host.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.4
aaasHostName2 DNS name of the backup server host.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.5
aaasIpAddress2 IP address of the backup server host.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.6
aaasRetries Number of retries the switch makes to the server to authenticate a user before trying the next backup server. The default value is 3.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.7
aaasTimout Time-out for server replies to authentication requests. The default value is 2.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.8
aaasRadKey The shared secret is a string of characters known to the switch and to the RADIUS server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server. …	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.9
aaasRadAuthPort For RADIUS server only. Port number for authentication request; the host is not used for authentication if set to 0. The default value is 1645.	Integer32r/w Enumerated Values: 1 create 2 delete	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.10
aaasRadAcctPort For RADIUS server only. Port number for accounting request; the host is not used for authentication if set to 0. The default value is 1646.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.11
aaasLdapPort For LDAP server only. Port number for LDAP server host.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.12
aaasLdapDn For LDAP server only. the super user dn, i.e., the administrative distinguished name recognized by the LDAP-enabled directory servers (e.g., cn=manager)	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.13
aaasLdapPasswd For LDAP server only. the super user password, i.e., the administrative password recognized by LDAP-enabled directory servers (e.g., secret). The secret is stored encrypted using a two way algorithm.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.14
aaasLdapSearchBase For LDAP server only. Search base recognized by LDAP-enabled directory servers (e.g.,o=company, c=US).	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.15
aaasLdapServType For LDAP server only. Directory server type used in LDAP Authentication: ns(0) - non significant value generic(1) - Generic Schema netscape(2) - Netscape Directory Server novell(3) - Novell …	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.16
aaasLdapEnableSsl Only for LDAP server. Specify if the connection between the swtich and the LDAP server use a SSL session.	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.17
aaasRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Constraints: range: 2-2 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.18
aaasTacacsKey The shared secret is a string of characters known to the switch and to the TACACS+ server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server.…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.19
aaasTacacsPort For TACACS+ server only. Port number for LDAP server host.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.20
aaasVrfName Name of the VRF that the server is on. This VRF name is valid only when the server type is RADIUS. (aaasProtocol = 1 (Radius).	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.21
aaasRadKeyHash The encrypted version of the aaasRadKey attribute.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.22
aaasLdapPasswdHash The encrypted version of the aaasLdapPasswd attribute.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.23
aaasTacacsKeyHash The encrypted version of the aaasTacacsKey attribute.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.24

This table allow to display and modify the configuration of the
authentication servers for the switch accesses.

aaaAuthSAEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1

A switch access authentication entry is specified by the type
of access.

Indexes

No indexes recorded

Column	Syntax	OID
aaatsInterface Type of connection that must be authenticated default(1) -define the default authentication method for console, telnet, ftp, snmp , http and ssh. If the operator interface is not especially configured the default value …	Enumeration	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.1
aaatsName1 Name of the server. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.2
aaatsName2 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and loc…	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.3
aaatsName3 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and loc…	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.4
aaatsName4 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and loc…	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.5
aaatsRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.7
aaatsCertificate use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the certifiicate is used to access to the authorization data of the…	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.8

This table shows current configuration for Switch access accounting.

aaaAcctSAEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1

Accounting configuration for switch access.

Indexes

No indexes recorded

Column	Syntax	OID
aaacsInterface For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1).	Integer32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.1
aaacsName1 Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.2
aaacsName2 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.3
aaacsName3 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.4
aaacsName4 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.5
aaacsRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.6

This table stores the commands that will be logged during an accounting session.
This feature is valid only for Tacacs+ accounting

aaaAcctCmdEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1

Tacacs+ Accounting configuration for executed commands.

Indexes

No indexes recorded

Column	Syntax	OID
aaacmdInterface For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1).	Integer32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.1
aaacmdSrvName1 Name of the Tacacs+ server. Other name correspond to an index value of the aaaServerTable	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.2
aaacmdSrvName2 Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.3
aaacmdSrvName3 Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.4
aaacmdSrvName4 Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.5
aaacmdRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.6

This table shows current configuration for MAC/Onex/Captive Portal authentication.

aaaAuthDAEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1

configuration for MAC/Onex/Captive Portal authentication.

Indexes

No indexes recorded

Column	Syntax	OID
aaadaInterface one for mac , two for 1x, three for captive portal authentication	Integer32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.1
aaadaName1 Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.2
aaadaName2 Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.3
aaadaName3 Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.4
aaadaName4 Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.5
aaadaRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.6

This table shows current configuration for device access accounting.

aaaAcctDAEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1

Accounting configuration for device access.

Indexes

No indexes recorded

Column	Syntax	OID
aaacdInterface accounting for mac ,onex & captive portal	Integer32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.1
aaacdName1 Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.2
aaacdName2 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.3
aaacdName3 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.4
aaacdName4 Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable for accounting.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.5
aaacdRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.6
aaacdSyslogIPAddrType Accounting Syslog IpAddress type	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.7
aaacdSyslogIPAddr Accounting Syslog IpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.8
aaacdSyslogUdpPort Accounting Syslog Udp port	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.9
aaacdCallngStationId Raduis Calling Station ID	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.10

This table shows current configuration for the local user database.

aaaUserEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1

An user configuration identified by its user name.

Indexes

No indexes recorded

Column	Syntax	OID
aaauUserName Name of the user.	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.1
aaauPassword Password of the user. For get response the password in encoded in a one way method. This makes the password readable by noone.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.2
aaauReadRight1 Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.3
aaauReadRight2 Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.4
aaauWriteRight1 Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.5
aaauWriteRight2 Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.6
aaauSnmpLevel Specifies if the user is authorized to use SNMP and if yes its security level. no(1) - Not authorized to use SNMP. noauth(2) - SNMPv1,SNMPv2c or SNMPv3 without authentication. sha(3) - SNMPv3 with SHA authentication and…	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.7
aaauSnmpAuthKey Authentication key of the user. The key is encoded in a two way method. The encryption key is deducted from this key.	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.8
aaauRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.9
aaauOldPassword Internal use	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.10
aaauPasswordExpirationDate The local time of when the password would be expired. This date will be reset once the value of aaaAsaDefaultPasswordExpirationInDays is updated. Only the following format is valid: mm/dd/y…	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.11
aaauPasswordExpirationInMinute Number of minutes from now till the password expiration time. Setting this object will update aaauPasswordExpirationDate. If -1, password will not be expired. If 0, password has been expired.	Integer32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.12
aaauPasswordAllowModifyDate The local time of when the password can be start to be modified. This date will be reset once the value of aaauPasswordAllowModifyDate is updated. Only the following format is valid: mm/dd/…	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.13
aaauPasswordLockoutEnable Indicate whether this account is locked out.	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.14
aaauBadAtempts Number bad password attempts in the observation window.	Integer32	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.15
aaauReadRight3 Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.16
aaauReadRight4 Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.17
aaauWriteRight3 Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.18
aaauWriteRight4 Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.19
aaauSnmpPrivPassword Authentication key of the user. The key is encoded in a two way method. The encryption key is deducted from this key.	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.20

Table contain AAA profiles details for Onex/MAC/Captive Portal

alaAaaProfEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1

Each entry defines AAA profile for Onex/MAC

Indexes

No indexes recorded

Column	Syntax	OID
alaAaaProfName AAA profile name for Onex/MAC/Captive Portal authenticated sessions	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.1
alaAaaProfOnexReAuthSts AAA profile Re-auth Status for Onex authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.2
alaAaaProfOnexReAuthIntrvl AAA profile Re-auth Interval for Onex authenticated sessions	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.3
alaAaaProfOnexReAuthTrstRadSts AAA profile Re-auth Trust Radius Status for Onex authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.4
alaAaaProfOnexIntrmIntrvl AAA profile Interium Interval for Onex authenticated sessions	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.5
alaAaaProfOnexIntmItvlTstRadSts AAA profile Interium Interval Trust Radius Status for Onex authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.6
alaAaaProfMacIntrmIntrvl AAA profile Interium Interval for MAC authenticated sessions	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.7
alaAaaProfMacIntmItvlTrstRadSts AAA profile Interium Interval Trust Radius Status for MAC authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.8
alaAaaProfMacSessTimeoutSts AAA profile Session Timeout Status for MAC authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.9
alaAaaProfMacSessTimeoutIntrvl AAA profile Session Timeout Interval for MAC authenticated sessions	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.10
alaAaaProfMacSessTmoutTrstRadSts AAA profile Session Timeout Trust Radius Status for MAC authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.11
alaAaaProfMacInActLogoutSts AAA profile InActivity Logout Status for MAC authenticated sessions	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.12
alaAaaProfMacInActLogoutIntrvl AAA profile InActivity Logout Interval for MAC authenticated sessions	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.13
alaAaaProfCpSessTimeoutSts AAA profile Captive Portal Session Timeout Status.	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.14
alaAaaProfCpSessTimeoutIntrvl AAA profile Captive Portal Session Timeout Interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.15
alaAaaProfCpSessTmotTrstRadSts AAA profile Captive Portal Session Timeout Trust radius Status	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.16
alaAaaProfCpInActLogoutSts AAA profile Captive Portal Inactivity Logout Status.	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.17
alaAaaProfCpInActLogoutIntrvl AAA profile Captive Portal Inactivity Logout Interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.18
alaAaaProfCpIntrmIntrvl AAA profile Captive Portal Interim Interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.19
alaAaaProfCpItrmIntlTrstRadSts AAA profile Captive Portal Interim Interval Trust Radius Status.	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.20
alaAaaProfRadNasPortId Radius Client Attribute NAS Port Identifier	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.21
alaAaaProfRadNasIdentifier Radius Client Attribute NAS Identifier	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.22
alaAaaProfRadUserNameDelim Radius Client Attribute user name delimiter	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.23
alaAaaProfRadPasswrdDelim Radius Client Attribute Password delimiter	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.24
alaAaaProfRadCallnStnIdDelim Radius Client attribute Calling Station delimiter	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.25
alaAaaProfRadCalldStnIdDelim Radius Client attribute Called Station delimiter	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.26
alaAaaProfRadUserNameCase Radius client Attribute UserName case	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.27
alaAaaProfRadPasswordCase Radius client attribute Password case	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.28
alaAaaProfRadCallnStnIdCase Radius client attribute CallingStationId case	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.29
alaAaaProfRadCalldStnIdCase Radius client attribute CalledStationId case	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.30
alaAaaProfRowStatus Row status of table .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.1.1.31

This table shows aaa profiles for configuring authentication server for MAC/Onex/Captive Portal

alaAaaProfAuthEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1

configuration for MAC/Onex authentication.

Indexes

No indexes recorded

Column	Syntax	OID
alaAaaProfAuthInterface one for mac, two for 1x,threee for Captive Portal	Enumeration	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.1
alaAaaProfAuthSrvName1 Radius authenticated server	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.2
alaAaaProfAuthSrvName2 Radius authenticated server	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.3
alaAaaProfAuthSrvName3 Radius authenticated server	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.4
alaAaaProfAuthSrvName4 Radius authenticated server	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.5
alaAaaProfAuthRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.2.1.6

Profile Table for configuring radius accounting server for MAC/Onex authentication.

alaAaaProfAcctEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1

configuration for MAC/Onex/Captive Portal accounting.

Indexes

No indexes recorded

Column	Syntax	OID
alaAaaProfAcctInterface one for mac, two for 1x, three for Captive Portal	Enumeration	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.1
alaAaaProfAcctSrvName1 Radius accounting Server for Onex/MAC/Captive Portal accounting sessions.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.2
alaAaaProfAcctSrvName2 Radius accounting Server for Onex/MAC/Captive Portal accounting sessions.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.3
alaAaaProfAcctSrvName3 Radius accounting Server for Onex/MAC/Captive Portal accounting sessions.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.4
alaAaaProfAcctSrvName4 Radius accounting Server for Onex/MAC/Captive Portal accounting sessions.	OctetStringr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.5
alaAaaProfAcctSyslogIPAddrType Accounting Syslog IpAddress type	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.6
alaAaaProfAcctSyslogIPAddr Accounting Syslog IpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.7
alaAaaProfAcctSyslogUdpPort Accounting Syslog Udp port	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.8
alaAaaProfAcctCalingStationId Raduis Calling Station ID	Enumerationr/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.9
alaAaaProfAcctRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.6.1.3.1.10

This table is used to configure SwitchAccess management station's Ip address.

aaaSwitchAccessMgmtStationEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.1.1

SwitchAccessManagementStation configuration.

Indexes

No indexes recorded

Column	Syntax	OID
aaaSwitchAccessMgmtStationIpType The Ip Address Type for the SwitchAccess management station	Enumeration	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.1.1.1
aaaSwitchAccessMgmtStationIpAddress The Ip Address for the SwitchAccess management station	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.1.1.2
aaaSwitchAccessMgmtStationIpPrefixLength The prefix length that, when combined with aaaSwitchAccessMgmtStationIpAddress , gives the prefix for this entry. The InetAddressType is given by the aaaSwitchAccessMgmtStationIpType object. Currntly release supports o…	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.1.1.3
aaaSwitchAccessMgmtStationRowStatus The Rowstatus of the AaaSwitchAccessMgmtStationEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.1.1.4

This table is populated by software for Banned Ip address.

aaaSwitchAccessBannedIpEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.2.1

SwitchAccessManagementStation configuration.

Indexes

No indexes recorded

Column	Syntax	OID
aaaSwitchAccessBannedIpType IP address type of banned IP	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.2.1.1
aaaSwitchAccessBannedIpAddress IP address of banned IP	OctetString	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.2.1.2
aaaSwitchAccessBannedIpRowStatus Rowstatus of the AaaSwitchAccessBannedIpEntry, Since this table is populated by switch, only destroy action is allowed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.2.1.3

This table is used to define the user privilege based on access type along with users existing privilege level.

aaaSwitchAccessPrivMaskEntry row .1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1

Priv mask configuration identified by the access type

Indexes

No indexes recorded

Column	Syntax	OID
aaaSwitchAccessType Type of connection for which privilege mask should be applied for. If no specific privilege is configured, by default all the mode shall have all the privilege for the user.	Enumeration	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.1
aaaSwitchAccessReadRight1 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.2
aaaSwitchAccessReadRight2 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.3
aaaSwitchAccessReadRight3 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.4
aaaSwitchAccessReadRight4 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.5
aaaSwitchAccessWriteRight1 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.6
aaaSwitchAccessWriteRight2 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.7
aaaSwitchAccessWriteRight3 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.8
aaaSwitchAccessWriteRight4 Specifies the families through the access type can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, through the access type the user is allow…	Unsigned32r/w	.1.3.6.1.4.1.6486.801.1.2.1.15.1.1.7.3.1.9