ADTRAN-GEN-ETHERNET-MIB Table View

This table contains Ethernet local Module
configuration parameters, one entry per Ethernet
Module port.

adGenEthernetModuleConfEntry row .1.3.6.1.4.1.664.5.67.1.15.1.1.1

This list contains Ethernet Module configuration
parameters and state variables and is indexed
by the module's slot index.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetModuleMaxEvpls The maximum number of EVPLs supported by this module.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.1.1.1
adGenEthernetModuleMaxEvcls The maximum number of EVCLs supported by this module.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.1.1.2
adGenEthernetModuleConfEvpls The number of EVPLs currently in use by this module.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.1.1.3
adGenEthernetModuleConfEvcls The number of EVCLs currently in use by this module.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.1.1.4

This table contains Ethernet local interface
configuration parameters, one entry per Ethernet
interface port.

adGenEthernetInterfaceConfEntry row .1.3.6.1.4.1.664.5.67.1.15.1.2.1

This list contains Ethernet interface configuration
parameters and state variables and is indexed
by an ethernet IfIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenEthernetInterfaceMaxEvpls The maximum number of EVPLs supported at this Ethernet interface.	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.2.1.1
adGenEthernetInterfaceMaxEvcls The maximum number of EVCCs supported at this Ethernet interface. The maximum number of EVCLs ranges from 0 to ??? only.	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.2.1.2
adGenEthernetInterfaceConfEvpls The number of EVPLs currently in use at this Ethernet interface.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.2.1.3
adGenEthernetInterfaceConfEvcls The number of EVCLs currently in use at this Ethernet interface.	Integer32 Constraints: range: 0-4096	.1.3.6.1.4.1.664.5.67.1.15.1.2.1.4

The Ethernet Virtual Path Link (EVPL) table.  A
bi-directional EVPL is modeled as one entry
in this table. This table can be used for
EVPL end-points for cross-connects and bridge
associations. In general, evp-evp cross-connects are needed
ONLY if tag translation is required, as direct-mapping is inherent.

adGenEthernetVplEntry row .1.3.6.1.4.1.664.5.67.1.15.1.4.1

An entry in the EVPL table. This entry is
used to model a bi-directional EVPL.

Indexes

IF-MIBifIndex adGenEthernetVplStag

Column	Syntax	OID
adGenEthernetVplStag The S-tag value of the EVPL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.1
adGenEthernetVplName The textual name given to this Ethernet VPL.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.2
adGenEthernetVplOperStatus The current operational status of the EVPL.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.3
adGenEthernetVplLastChange The value of sysUpTime at the time this EVPL entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.4
adGenEthernetVplCrossConnectType This object is instantiated only for an EVPL which is cross-connected to other entities. The value of this object is initialized by the agent after the associated entries in a cross connect table have been created. This…	AdGenEthernetCrossConnectType Type Values: 1 none 2 vplCrossConnect 3 vclCrossConnect 4 evplCrossConnect 5 evclCrossConnect 6 vplEvplCrossConnect 7 vclEvclCrossConnect	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.5
adGenEthernetVplCrossConnectIdentifier This object is instantiated only for an EVPL which is cross-connected to other entities. The value of this object is initialized by the agent after the associated entries in a cross-connect table have been created.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.6
adGenEthernetVplLastError The string describing the last error experienced for this particular entry in the table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.7
adGenEthernetVplRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.4.1.8

The Ethernet Virtual Circuit Link (EVCL) table.  A
bi-directional EVCL is modeled as one entry
in this table. This table can be used for
EVCL end-points for cross-connects to other endpoints
including, EVCLs, VCLs, bridges, etc.

adGenEthernetVclEntry row .1.3.6.1.4.1.664.5.67.1.15.1.6.1

An entry in the EVCL table. This entry is
used to model a bi-directional EVCL.

Indexes

IF-MIBifIndex adGenEthernetVclStag adGenEthernetVclCtag

Column	Syntax	OID
adGenEthernetVclStag The S-tag value of the EVCL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.1
adGenEthernetVclCtag The C-tag value of the EVCL.	AdGenEthernetCtag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.2
adGenEthernetVclName The textual name given to this Ethernet VCL.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.3
adGenEthernetVclOperStatus The current operational status of the EVCL.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.4
adGenEthernetVclLastChange The value of sysUpTime at the time this EVCL entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.5
adGenEthernetVclCrossConnectType This object is instantiated only for an EVCL which is cross-connected to other entities. The value of this object is initialized by the agent after the associated entries in a cross connect table have been created. This…	AdGenEthernetCrossConnectType Type Values: 1 none 2 vplCrossConnect 3 vclCrossConnect 4 evplCrossConnect 5 evclCrossConnect 6 vplEvplCrossConnect 7 vclEvclCrossConnect	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.6
adGenEthernetVclCrossConnectIdentifier This object is instantiated only for an EVCL which is cross-connected to other entities. The value of this object is initialized by the agent after the associated entries in a cross connect table have been created.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.7
adGenEthernetVclLastError The string describing the last error experienced.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.8
adGenEthernetVclRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.6.1.9

The VCL Cross Connect table for ATM vcl to Ethernet EVCL endpoints.
Endpoints are defined against interfaces, which may equate to physical
(Ethernet, DSL) or logical (bridge) entities.
An entry in this table models a
cross-connected vcl to evcl pair.  RFC 2515 covers vcl to vcl cross-
connects, while evcl to evcl is supported in a subsequent table.
This cross-connect type implies interworking from VPI/VCI to S-tag/C-tag).
Each vcl/evcl must have its vclCrossConnect set to point to the associated
cross-connect table and index.

adGenEthernetVclEvclCrossConnectEntry row .1.3.6.1.4.1.664.5.67.1.15.1.10.1

An entry in the VCL to EVCL Cross Connect table.
This entry is used to model a bi-directional ATM to Ethernet
VCL cross-connect between two end points.

Indexes

adGenEthernetVclEvclCrossConnectIndex adGenEthernetVclEvclCrossConnectAtmIfIndex adGenEthernetVclEvclCrossConnectAtmVpi adGenEthernetVclEvclCrossConnectAtmVci adGenEthernetVclEvclCrossConnectEthIfIndex adGenEthernetVclEvclCrossConnectEthStag adGenEthernetVclEvclCrossConnectEthCtag

Column	Syntax	OID
adGenEthernetVclEvclCrossConnectIndex A unique value to identify this VCL-EVCL cross-connect. For each EVCL/VCL associated with this cross-connect, the agent reports this cross-connect index value in the CrossConnectIdentifier attribute and adGenEthernetVcl…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.1
adGenEthernetVclEvclCrossConnectAtmIfIndex The ifIndex value of the ATM interface for this cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.2
adGenEthernetVclEvclCrossConnectAtmVpi The VPI value of the Atm VCL.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.3
adGenEthernetVclEvclCrossConnectAtmVci The VCI value of the Atm VCL.	ATM-TC-MIBAtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.4
adGenEthernetVclEvclCrossConnectEthIfIndex The ifIndex value of the Ethernet interface for this cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.5
adGenEthernetVclEvclCrossConnectEthStag The S-tag value of the EVCL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.6
adGenEthernetVclEvclCrossConnectEthCtag The C-tag value of the EVCL.	AdGenEthernetCtag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.7
adGenEthernetVclEvclCrossConnectName The textual name given to this cross-connect.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.8
adGenEthernetVclEvclCrossConnectOperStatus The current operational status of the EVCL cross-connect.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.9
adGenEthernetVclEvclCrossConnectLastChange The value of sysUpTime at the time this EVCL cross-connect entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.10
adGenEthernetVclEvclCrossConnectLastError The string describing the last error experienced.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.11
adGenEthernetVclEvclCrossConnectRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.12
adGenEthernetVclEvclCrossConnectOption82Insert Enable/disable Option 82 Insertion.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.67.1.15.1.10.1.13

The VP Cross Connect table for ATM vp and Ethernet evp endpoints.
An entry in this table models cross-connects between ATM vpl
and Ethernet evpls (interworking from VPI to S-tag). Each vpl/evpl
must have its vplCrossConnectIdentifier set to point to the
associated cross-connect index and vplCrossConnectType set to the
adGenEthernetVplEvplCrossConnectTable type.

adGenEthernetVplEvplCrossConnectEntry row .1.3.6.1.4.1.664.5.67.1.15.1.14.1

An entry in the VP Cross Connect table.
This entry is used to model a bi-directional ATM to Ethernet mixed
VP cross-connect cross-connecting two end points.

Indexes

adGenEthernetVplEvplCrossConnectIndex adGenEthernetVplEvplCrossConnectAtmIfIndex adGenEthernetVplEvplCrossConnectAtmVp adGenEthernetVplEvplCrossConnectEthIfIndex adGenEthernetVplEvplCrossConnectEthStag

Column	Syntax	OID
adGenEthernetVplEvplCrossConnectIndex A unique value to identify this VPL-EVPL cross-connect. For each EVPL/VPL associated with this cross-connect, the agent reports this cross-connect index value in the CrossConnectIdentifier attribute and adGenEthernetVpl…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.1
adGenEthernetVplEvplCrossConnectAtmIfIndex The ifIndex value of the ATM interface for this cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.2
adGenEthernetVplEvplCrossConnectAtmVp The VPI value of the VP.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.3
adGenEthernetVplEvplCrossConnectEthIfIndex The ifIndex value of the Ethernet interface for this cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.4
adGenEthernetVplEvplCrossConnectEthStag The S-tag value of the EVPL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.5
adGenEthernetVplEvplCrossConnectName The textual name given to this cross-connect.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.6
adGenEthernetVplEvplCrossConnectOperStatus The current operational status of the EVCL cross-connect.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.7
adGenEthernetVplEvplCrossConnectLastChange The value of sysUpTime at the time this EVCL cross-connect entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.8
adGenEthernetVplEvplCrossConnectLastError The string describing the last error experienced.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.9
adGenEthernetVplEvplCrossConnectRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.10
adGenEthernetVplEvplCrossConnectOption82Insert Enable/disable Option 82 Insertion.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.67.1.15.1.14.1.11

The VPL Cross Connect table for Ethernet Evpl endpoints.
Endpoints are defined against interfaces, which may equate to physical
(Ethernet) or logical (bridge) entities.
An entry in this table models a cross-connected Evpl pair.
Each Evpl must have its vclCrossConnect set to point to the associated
cross-connect table and index.

adGenEthernetEvplCrossConnectEntry row .1.3.6.1.4.1.664.5.67.1.15.1.18.1

An entry in the Evpl Cross Connect table.
This entry is used to model a bi-directional Ethernet
VPL cross-connect between two end points.

Indexes

adGenEthernetEvplCrossConnectIndex adGenEthernetEvplCrossConnectIfIndex1 adGenEthernetEvplCrossConnectStag1 adGenEthernetEvplCrossConnectIfIndex2 adGenEthernetEvplCrossConnectStag2

Column	Syntax	OID
adGenEthernetEvplCrossConnectIndex A unique value to identify this Evpl cross-connect. For each Evpl associated with this cross-connect, the agent reports this cross-connect index value in the CrossConnectIdentifier attribute and adGenEthernetEvplCrossCo…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.1
adGenEthernetEvplCrossConnectIfIndex1 The ifIndex value of an Ethernet/Logical interface for this EVP cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.2
adGenEthernetEvplCrossConnectStag1 The Stag value of an Evpl.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.3
adGenEthernetEvplCrossConnectIfIndex2 The ifIndex value of an Ethernet/Logical interface for this EVP cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.4
adGenEthernetEvplCrossConnectStag2 The S-tag value of an Evpl.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.5
adGenEthernetEvplCrossConnectName The textual name given to this cross-connect.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.6
adGenEthernetEvplCrossConnectOperStatus The current operational status of the Evpl cross-connect.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.7
adGenEthernetEvplCrossConnectLastChange The value of sysUpTime at the time this Evpl cross-connect entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.8
adGenEthernetEvplCrossConnectLastError The string describing the last error experienced.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.9
adGenEthernetEvplCrossConnectRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.18.1.10

The VCL Cross Connect table for Ethernet EVCL endpoints.
Endpoints are defined against interfaces, which may equate to physical
(Ethernet) or logical (bridge) entities.
An entry in this table models a cross-connected evcl pair.
Each evcl must have its vclCrossConnect set to point to the associated
cross-connect table and index.

adGenEthernetEvclCrossConnectEntry row .1.3.6.1.4.1.664.5.67.1.15.1.22.1

An entry in the EVCL Cross Connect table.
This entry is used to model a bi-directional Ethernet
VCL cross-connect between two end points.

Indexes

adGenEthernetEvclCrossConnectIndex adGenEthernetEvclCrossConnectIfIndex1 adGenEthernetEvclCrossConnectStag1 adGenEthernetEvclCrossConnectCtag1 adGenEthernetEvclCrossConnectIfIndex2 adGenEthernetEvclCrossConnectStag2 adGenEthernetEvclCrossConnectCtag2

Column	Syntax	OID
adGenEthernetEvclCrossConnectIndex A unique value to identify this EVCL cross-connect. For each EVCL associated with this cross-connect, the agent reports this cross-connect index value in the CrossConnectIdentifier attribute and adGenEthernetEvclCrossCo…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.1
adGenEthernetEvclCrossConnectIfIndex1 The ifIndex value of an Ethernet/Logical interface for this EVC cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.2
adGenEthernetEvclCrossConnectStag1 The Stag value of an EVCL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.3
adGenEthernetEvclCrossConnectCtag1 The Ctag value of an EVCL.	AdGenEthernetCtag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.4
adGenEthernetEvclCrossConnectIfIndex2 The ifIndex value of an Ethernet/Logical interface for this EVC cross-connect.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.5
adGenEthernetEvclCrossConnectStag2 The S-tag value of an EVCL.	AdGenEthernetStag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.6
adGenEthernetEvclCrossConnectCtag2 The C-tag value of an EVCL.	AdGenEthernetCtag Type Constraints: range: 0..4095	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.7
adGenEthernetEvclCrossConnectName The textual name given to this cross-connect.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.8
adGenEthernetEvclCrossConnectOperStatus The current operational status of the EVCL cross-connect.	AdGenEthernetOperStatus Type Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.9
adGenEthernetEvclCrossConnectLastChange The value of sysUpTime at the time this EVCL cross-connect entered its current operational state.	AdGenEthernetLastChange	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.10
adGenEthernetEvclCrossConnectLastError The string describing the last error experienced.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.11
adGenEthernetEvclCrossConnectRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.67.1.15.1.22.1.12

This table contains status information for S-tag membership.

adGenEthernetStagMembershipEntry row .1.3.6.1.4.1.664.5.67.1.15.1.23.1

...

Indexes

adGenEthernetVplStag IF-MIBifIndex

Column	Syntax	OID
adGenEthernetStagMembershipCount This variable returns a count of the number of items that are connected to this EVPL. The count is incremented, for example, when a VclEvclCrossConnect is created. The value is decremented when the cross-connect is del…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.67.1.15.1.23.1.1