ACKSYS-MIB Table View

Significant only in MAX-ACCESS POINT mode. This table shows information bridge AP filtering rules list.
[FW:E2080.AC.1:5.52.0]

bridgeAPFilteringEntry row .1.3.6.1.4.1.28097.1.1.2.8.9.1

Shows information of the rule.
[FW:E2080.AC.1:5.52.0]

Indexes

bridgeAPFilteringListId

Column	Syntax	OID
bridgeAPFilteringListId Rule index. [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.2.8.9.1.1
bridgeAPFilteringListName Show rule's name [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.28097.1.1.2.8.9.1.2
bridgeAPFilteringListMAC MAC address of the client. [FW:E2080.AC.1:5.52.0]	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.1.1.2.8.9.1.3
bridgeAPFilteringListEnable Show if a rule is enabled or not. [FW:E2080.AC.1:5.52.0]	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.1.1.2.8.9.1.4

Significant only in MAX-ACCESS POINT mode.
This table shows information AP bridge filtering rules list.
[FW:E2080.AC.1:5.52.0]

bridgeWirelessScanEntry row .1.3.6.1.4.1.28097.1.1.2.11.1.1

Shows information of the rule.
[FW:E2080.AC.1:5.52.0]

Indexes

bridgeWirelessScanAPMac

Column	Syntax	OID
bridgeWirelessScanAPMac MAC address of the access point. [FW:E2080.AC.1:5.52.0]	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.1.1.2.11.1.1.1
bridgeWirelessScanSSID [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-33	.1.3.6.1.4.1.28097.1.1.2.11.1.1.2
bridgeWirelessScanChannel [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.2.11.1.1.3
bridgeWirelessScanMode Show AP's IEEE 802.11x compatibility mode. [FW:E2080.AC.1:5.52.0]	Enumeration Enumerated Values: 1 b-only 2 g-only 3 mixed-b-g 4 a-only	.1.3.6.1.4.1.28097.1.1.2.11.1.1.4
bridgeWirelessScanSecurity [FW:E2080.AC.1:5.52.0]	Enumeration Enumerated Values: 0 none 1 wep 2 wpa	.1.3.6.1.4.1.28097.1.1.2.11.1.1.5
bridgeWirelessScanRssi [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.2.11.1.1.6

This table show information on port forwading rules
[FW:E2080.AC.1:5.52.0]

bridgeNatPortForwardingEntry row .1.3.6.1.4.1.28097.1.1.2.12.11.1.1

Shows information of rule.
[FW:E2080.AC.1:5.52.0]

Indexes

bridgeNatPortForwardingListId

Column	Syntax	OID
bridgeNatPortForwardingListId Rule index [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.1
bridgeNatPortForwardingListName Show rule's name [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.2
bridgeNatPortForwardingListIpAddr Show ipaddress to forward data [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.3
bridgeNatPortForwardingListPublicTcpPort Show public TCP port [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.4
bridgeNatPortForwardingListPrivateTcpPort Show private TCP port [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.5
bridgeNatPortForwardingListPublicUdpPort Show public TCP port [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.6
bridgeNatPortForwardingListPrivateUdpPort Show private TCP port [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.7
bridgeNatPortForwardingListEnable Rule state [FW:E2080.AC.1:5.52.0]	Enumeration Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.1.1.2.12.11.1.1.8

Significant only in MAX-ACCESS POINT mode. This table shows information about connected clients.
[FW:E2080.AC.1:5.52.0]

apClientEntry row .1.3.6.1.4.1.28097.1.1.3.1.1

Shows information about the connected client.
[FW:E2080.AC.1:5.52.0]

Indexes

clientMacAddr

Column	Syntax	OID
clientMacAddr MAC address of the client connected to the AP. [FW:E2080.AC.1:5.52.0]	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.1.1.3.1.1.1
client80211Mode Show client's IEEE 802.11x compatibility mode. [FW:E2080.AC.1:5.52.0]	Enumeration Enumerated Values: 1 b-only 2 g-only 3 mixed-b-g 4 a-only	.1.3.6.1.4.1.28097.1.1.3.1.1.2
clientTxRate Client's communication speed in bits per second [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.3.1.1.3
clientRssiPercent Client's RSSI (percent) [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.28097.1.1.3.1.1.4

Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list.
[FW:E2080.AC.1:5.52.0]

apClientFilteringEntry row .1.3.6.1.4.1.28097.1.1.3.4.11.1

Shows information of the rule.
[FW:E2080.AC.1:5.52.0]

Indexes

apClientFilteringListId

Column	Syntax	OID
apClientFilteringListId Rule index. [FW:E2080.AC.1:5.52.0]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.1.1.3.4.11.1.1
apClientFilteringListName Show rule's name [FW:E2080.AC.1:5.52.0]	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.28097.1.1.3.4.11.1.2
apClientFilteringListMAC MAC address of the client. [FW:E2080.AC.1:5.52.0]	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.1.1.3.4.11.1.3
apClientFilteringListEnable Show if the rule is enabled or not. [FW:E2080.AC.1:5.52.0]	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.1.1.3.4.11.1.4

A table that contains information of logical networks (level 3).
[FW:E2148.AC.1:3.14.0.1]

statusIpSubnetEntry row .1.3.6.1.4.1.28097.7.1.1

A table that contains network information.

Indexes

statusIpSubnetIndex

Column	Syntax	OID
statusIpSubnetIndex Network index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.1.1.1
statusIpSubnetName Network interface name	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.1.1.2
statusIpSubnetLabel Network friendly name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.1.1.3
statusIpSubnetIfIndex Network kernel index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.1.1.4
statusIpSubnetAddrMode Ip address protocol of this network	Enumeration Enumerated Values: 1 static 2 dhcp 3 none 4 vrrp	.1.3.6.1.4.1.28097.7.1.1.5
statusIpSubnetIPv4Addr Current IPv4 address of this network	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.28097.7.1.1.6
statusIpSubnetIPv4Mask Current IPv4 subnet mask of this network	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.28097.7.1.1.7
statusIpSubnetDNS Space-separated list of DNS IP addresses	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.1.1.8
statusIpSubnetMember Space-separated list that contains name of interfaces related to this network	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.1.1.9
statusIpSubnetMemberIndex Space-separated list that contains kernel index of interfaces related to this network	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.1.1.10

List of Wi-Fi service sets (ESSID, ISSID)
with an IP address
[FW:E2148.AC.1:2.8.0.1]

statusIfWlanEntry row .1.3.6.1.4.1.28097.7.2.1

Details about a Wi-Fi service set

Indexes

statusIfWlanIndex

Column	Syntax	OID
statusIfWlanIndex Wlan index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.1
statusIfWlanSSID SSID string	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.28097.7.2.1.2
statusIfWlanMode STA role	Enumeration Enumerated Values: 0 undefined 1 infra-client 2 access-point 3 ad-hoc 5 monitor 6 ieee80211s 7 repeater 8 isolating-access-point	.1.3.6.1.4.1.28097.7.2.1.3
statusIfWlanBand Wlan band/modulation type mix	WifiFlavor Type Values: 1 b-only 2 g-only 3 mixed-b-g 4 a-only 10 n-g 11 n-bg 12 n-a 16 ac	.1.3.6.1.4.1.28097.7.2.1.4
statusIfWlanChannel Wlan channel (frequency span index): -1 channel indicates that the product is searching for a channel	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.5
statusIfWlanFrequency Radio frequency: 0 frequency indicates that the product is searching for a radio frequency	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.6
statusIfWlanEnable Operational state	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.7.2.1.7
statusIfWlanPhy PHY index for this wlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.8
statusIfWlanSecurityMode Security policy	SecurityModes Type Values: 1 none 2 wep 3 wpa-wpa2-psk 4 wpa-wpa2 5 sae-wpa3-psk 6 wpa3 7 owe	.1.3.6.1.4.1.28097.7.2.1.9
statusIfWlanWpaVersion WPA version (version 1 is deprecated)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.10
statusIfWlanNPeers Number of peer clients	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.11
statusIfWlanQuality Radio link quality	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.12
statusIfWlanBssid BSSID	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.2.1.13
statusIfWlanState Connection state	Enumeration Enumerated Values: 0 not-connected 9 connected	.1.3.6.1.4.1.28097.7.2.1.14
statusIfStaFastBSSTransitionActivated 802.11r support (dot11FastBSSTransitionActivated)	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.7.2.1.15
statusIfWlanBeaconSignalAvg Signal level average in dBm of the last few beacons received Before WaveOS V2.8.0.1, this OID gives the last beacon signal After WaveOS V2.8.0.1, this OID gives the avg of the last few beacons received	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.16
statusIfWlanNoise Noise level in dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.17
statusIfWlanWpaCipher WPA cipher	CipherTypes Type Values: 1 tkip 2 aes 3 aestkip	.1.3.6.1.4.1.28097.7.2.1.18
statusIfWlanWpaPreSharedKey WPA PSK pre-shared key	OctetString	.1.3.6.1.4.1.28097.7.2.1.19
statusIfWlanName Wireless interface name [FW:E2148.AC.1:3.14.0.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.2.1.20
statusIfWlanIfIndex Wireless interface kernel index [FW:E2148.AC.1:3.14.0.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.2.1.21

This table contains information about Wi-Fi adapters.
[FW:E2148.AC.1:2.8.0.1]

statusPhyWifiEntry row .1.3.6.1.4.1.28097.7.3.1

Details about a Wi-Fi service set

Indexes

statusPhyWifiIndex

Column	Syntax	OID
statusPhyWifiIndex Radio device index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.3.1.1
statusPhyWifiLabel Friendly name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.3.1.2
statusPhyWifiEnable Operational state	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.7.3.1.3
statusPhyWifiName Friendly name	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.3.1.4
statusPhyWifiClusterMode Cluster mode, empty for none, 'dualscan' for data/scan separation	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.28097.7.3.1.5
statusPhyWifiClusterList List of device names in the cluster, e.g. 'radio0 radio1'	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.28097.7.3.1.6
statusPhyWifiClusterArgs Cluster params for this device. For 'dualscan' mode, one device must be set to 'scan', the others in the cluster must be set to 'data'.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.28097.7.3.1.7
statusPhyWifiMAC MAC address of the radio device [FW:E2148.AC.1:3.14.0.1]	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.3.1.8
statusPhyWifiWids WIDS services state. 0: not started. 1: currently monitoring for rogue APs. [FW:E2148.AC.1:4.16.0.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.3.1.9

List of Wi-Fi access points devices around
[FW:E2148.AC.1:2.8.0.1]

statusPhyWifiScanEntry row .1.3.6.1.4.1.28097.7.4.1

Details about a Wi-Fi access point

Indexes

statusPhyWifiScanTableIndex

Column	Syntax	OID
statusPhyWifiScanTableIndex Radio device index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.4.1.1
statusPhyWifiScanSSID Radio device SSID	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.28097.7.4.1.2
statusPhyWifiScanSignal Radio device signal power in dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.4.1.3
statusPhyWifiScanFreq Radio device central frequency (in MHz)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.4.1.4
statusPhyWifiScanMode Radio device mode	Enumeration Enumerated Values: 1 unknown 2 infrastructure 3 adhoc 4 mesh	.1.3.6.1.4.1.28097.7.4.1.5
statusPhyWifiScanSecurity Radio device mode	SecurityModes Type Values: 1 none 2 wep 3 wpa-wpa2-psk 4 wpa-wpa2 5 sae-wpa3-psk 6 wpa3 7 owe	.1.3.6.1.4.1.28097.7.4.1.6
statusPhyWifiScanBssid Radio device bssid	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.4.1.7
statusPhyWifiScanPhyNum Scan phy index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.4.1.8
statusPhyWifiScanChWidth Radio device channel width [FW:E2148.AC.1:4.8.0.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.4.1.9

A table that contains information related to STP
about every bridge
[FW:E2148.AC.1:2.8.0.1]

statusSpanningTreeEntry row .1.3.6.1.4.1.28097.7.7.1

A list of objects containing information for each Bridge
about the Spanning Tree Protocol for that Bridge.

Indexes

statusSpanningTreeBridgeName

Column	Syntax	OID
statusSpanningTreeBridgeName Symbolic name of the bridge for which this entry contains Spanning Tree Protocol management information. Referred to in the general Interfaces table.	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.7.1.1
statusSpanningTreeNetworkLabel The network label that contains the current bridge.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.7.1.2
statusSpanningTreeBridgeId The bridge Id. It is made up using the bridge priority and the base MAC address of the bridge.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.28097.7.7.1.3
statusSpanningTreeDesignatedRoot Root Bridge for the Spanning tree. It is made up using the bridge priority and the base MAC address of the bridge.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.28097.7.7.1.4
statusSpanningTreeRootPort The root port name of the current bridge. none is set if there is no root port in the bridge	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.7.1.5

A table that contains port-specific information
for the Spanning Tree Protocol.
[FW:E2148.AC.1:2.8.0.1]

statusSpanningTreePortEntry row .1.3.6.1.4.1.28097.7.8.1

A list of objects containing information maintained by
every port about the Spanning Tree Protocol state
for that port.

Indexes

statusSpanningTreePortBridgeName statusSpanningTreePortName

Column	Syntax	OID
statusSpanningTreePortBridgeName Symbolic name of the bridge for which this entry contains Spanning Tree Protocol management information. Referred to in the general Interfaces table.	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.8.1.1
statusSpanningTreePortNetworkLabel The network label that contains the current bridge.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.8.1.2
statusSpanningTreePortName The name of the port for which this entry contains Spanning Tree Protocol management information. Referred to in the general Interfaces table.	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.8.1.3
statusSpanningTreePortLabel Port label for the specified port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.8.1.4
statusSpanningTreePortId Port identifier for the specified port, it is made up from the port priority and the interface number of the port.	PortId Type Constraints: range: 2	.1.3.6.1.4.1.28097.7.8.1.5
statusSpanningTreePortRole The port's current role in the Spanning Tree	Enumeration Enumerated Values: 0 disabled 1 root 2 designated 3 alternate 4 backup 5 master	.1.3.6.1.4.1.28097.7.8.1.6
statusSpanningTreePortState The port's current state in the Spanning Tree	Enumeration Enumerated Values: 0 discarding 1 learning 2 forwarding	.1.3.6.1.4.1.28097.7.8.1.7
statusSpanningTreePortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.28097.7.8.1.8
statusSpanningTreePortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.28097.7.8.1.9
statusSpanningTreePortDesignatedCost The path cost of the Designated Port of the segment connected to this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.8.1.10
statusSpanningTreePortDesignatedBridge The Bridge Identifier of the Bridge that this port considers to be the Designated Bridge for this port's segment.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.28097.7.8.1.11
statusSpanningTreePortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	PortId Type Constraints: range: 2	.1.3.6.1.4.1.28097.7.8.1.12
statusSpanningTreePortOperEdgePort The operational value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.8.1.13
statusSpanningTreePortOperPointToPoint The operational value of the Point to Point parameter. A value of true(1) indicates that this port is point to point, otherwise set to false(2)	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.8.1.14

A table that contains information of associated stations.
[FW:E2148.AC.1:3.12.0.1]

statusAssociationEntry row .1.3.6.1.4.1.28097.7.9.1

A table that contains information of associated stations.

Indexes

statusAssociationIndex

Column	Syntax	OID
statusAssociationIndex Associated station index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.9.1.1
statusAssociationMacAddr MAC address of the associated station	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.9.1.2
statusAssociationSSID SSID of the associated station	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.9.1.3
statusAssociationBSSID BSSID of the associated station	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.9.1.4
statusAssociationPhy radio name of the radio that the station connects	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.9.1.5
statusAssociationSignaldBm RSSI level in dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.9.1.6
statusAssociationNoisedBm Noise level in dBm	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.9.1.7
statusAssociationSNR Signal-to-noise ratio	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.9.1.8
statusAssociationWlanIndex Index of the role that the station connects [FW:E2148.AC.1:3.12.9.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.9.1.9
statusAssociationSecurityMode Security policy [FW:E2148.CA.1:4.8.0.1-R3]	SecurityModes Type Values: 1 none 2 wep 3 wpa-wpa2-psk 4 wpa-wpa2 5 sae-wpa3-psk 6 wpa3 7 owe	.1.3.6.1.4.1.28097.7.9.1.10

A table that contains information of physical ethernet adapter.
[FW:E2148.AC.1:3.12.0.1]

statusPhyLanEntry row .1.3.6.1.4.1.28097.7.10.1

A table that contains information of physical ethernet adapter.

Indexes

statusPhyLanIndex

Column	Syntax	OID
statusPhyLanIndex Physical ethernet index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.10.1.1
statusPhyLanName Physical ethernet adapter interface name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.10.1.2
statusPhyLanLabel Physical ethernet adapter friendly name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.10.1.3
statusPhyLanIfIndex Physical ethernet kernel index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.10.1.4

A table that contains information of mesh survey.
[FW:E2148.AC.1:3.12.9.1]

statusMeshSurveyEntry row .1.3.6.1.4.1.28097.7.11.1

A table that contains information of mesh survey.

Indexes

statusMeshSurveyIndex

Column	Syntax	OID
statusMeshSurveyIndex Mesh survey index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.11.1.1
statusMeshSurveyDstMacAddr Destination MAC address of the mesh path	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.11.1.2
statusMeshSurveyNextHopMacAddr MAC address of the next mesh point to reach destination MAC address	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.7.11.1.3
statusMeshSurveyPhy Radio name of the mesh path	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.11.1.4
statusMeshSurveyMetric Total cost of the mesh path	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.11.1.5
statusMeshSurveyDiscoveryTimeout Current discovery timeout for the mesh path	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.11.1.6
statusMeshSurveyDiscoveryRetries The number of discovery retries	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.11.1.7
statusMeshSurveyStateActive State Active: a value of true(1) indicates that the mesh path can be used for forwording	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.11.1.8
statusMeshSurveyStateResolving State Resolving: a value of true(1) indicates that the discovery process for the mesh path is running	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.11.1.9
statusMeshSurveyStateDSNValid State DSN Valid: a value of true(1) indicates that the mesh path contains a valid destination sequence number	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.11.1.10
statusMeshSurveyStateFixed State Fixed: a value of true(1) indicates that the status of the mesh path is fixed	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.11.1.11
statusMeshSurveyStateResolved State Resolved: a value of true(1) indicates that the discovery process ends successfully	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.28097.7.11.1.12
statusMeshSurveyMeshId Mesh ID string of the mesh path	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.11.1.13
statusMeshSurveyWlanIndex Wlan index of the mesh path	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.11.1.14

This table contains information about cellular adapters.
[FW:E2148.AC.1:3.16.1.1]

statusPhyCellEntry row .1.3.6.1.4.1.28097.7.12.1

Details about a cellular adapter
[FW:E2148.AC.1:3.16.1.1]

Indexes

statusPhyCellIndex

Column	Syntax	OID
statusPhyCellIndex Cellular adapter index [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.1
statusPhyCellLabel The label physically identifying the antennas set on the device [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.2
statusPhyCellFriendlyName Friendly name for this cellular adapter [FW:E2148.AC.1:3.16.1.1]	OctetString	.1.3.6.1.4.1.28097.7.12.1.3
statusPhyCellEnable Administrative state [FW:E2148.AC.1:3.16.1.1]	DisableEnable Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.7.12.1.4
statusPhyCellIMEI Adapter IMEI [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.5
statusPhyCellModel Manufacturer adapter ID [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.6
statusPhyCellName Symbolic identifier for the adapter [FW:E2148.AC.1:3.16.1.1]	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.7.12.1.7
statusPhyCellSimSelected SIM card currently in use (1 or 2, 0=unknown) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.8
statusPhyCellSimState SIM state, see 3GPP TS27.007 +CPIN [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.9
statusPhyCellSimIMSI Subscriber identity (IMSI) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.10
statusPhyCellAttachMode Network registration state, see 3GPP TS27.007 +CREG [FW:E2148.AC.1:3.16.1.1]	CellAttachMode Type Values: 0 reg-hung 1 reg-home 2 reg-searching 3 reg-denied 4 reg-noCell 5 reg-roaming 6 reg-homeSMS 7 reg-roamingSMS 8 reg-emgOnly 9 reg-homeNoCSFB 10 reg-roamingNoCSFB	.1.3.6.1.4.1.28097.7.12.1.11
statusPhyCellOperator Telecom operator name [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.12
statusPhyCellMcc Mobile Country Code [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.13
statusPhyCellMnc Mobile Network (Operator) Code [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.14
statusPhyCellBaseLAC Location Area Code [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.15
statusPhyCellBaseCID Cell ID [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.16
statusPhyCellRegistrationClass Registration class (gsm, cdma) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.17
statusPhyCellAccessTech Access Technology, see 3GPP TS27.007 +CREG [FW:E2148.AC.1:3.16.1.1]	CellAccessTech Type Values: 0 at-gsm 1 at-gsmCompact 2 at-UTRAN 3 at-EGPRS 4 at-HSDPA 5 at-HSUPA 6 at-HSPA 7 at-EUTRAN 8 at-GSM-IoT 9 at-EUTRAN-NB-S1	.1.3.6.1.4.1.28097.7.12.1.18
statusPhyCellBandName Radio band [FW:E2148.AC.1:3.16.1.1]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.7.12.1.19
statusPhyCellARFCN Channel (ARFCN) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.20
statusPhyCellRSSI Signal quality (RSSI) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.21
statusPhyCellBER Bit Error Rate Estimator (see 3GPP TS45.008) [FW:E2148.AC.1:3.16.1.1]	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.7.12.1.22

List of network interfaces currently associated
with an IP address
[FW:E2148.AC.1:2.8.0.1]

configIpSubnetEntry row .1.3.6.1.4.1.28097.8.1.1.1

Details about an IP address
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpSubnetName

Column	Syntax	OID
configIpSubnetName Interface attached to this subnet	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.8.1.1.1.1
configIpSubnetRowStatus row addition/deletion support [net]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.1.1.2
configIpAddressMode Ip address protocol of this subnet	Enumerationr/w Enumerated Values: 1 static 2 dhcp 3 none 4 vrrp	.1.3.6.1.4.1.28097.8.1.1.1.3
configIpSubnetIPv4Addr IPv4 address given to the interface	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.1.1.4
configIpSubnetIPv4Mask IPv4 subnet mask	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.1.1.5
configIpSubnetMetric Subnet metric	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.1.1.6
configIpSubnetDnsList Space-separated list of DNS IP addresses	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.1.1.7
configIpSubnetInterface Interface related to this ipSubnet. This field must be left blank for bridge interfaces	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.1.1.8
configIpSubnetIPv4Gateway IPv4 gateway	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.1.1.9
configIpSubnetFriendlyName Friendly name of this subnet	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.1.1.10
configIpSubnetBridgeEnable Write 2 (Enable) to configure this subnet as a bridge type interface: create a bridge over specified interface(s) in this subnet. Write 1 (Disable) to configure this subnet as an IP subnet type interface:…	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.11
configIpSubnetPersistence Define the behaviour of the IP layer when the lower interface loses its connection. - When enabled, the IP settings (IP addresses, routes through this interface...) remain in place. - When disabled, the IP settings ar…	TriStater/w Type Values: 0 default 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.12
configIpSubnetEnable Set to Enable to install the layer 3 network. If disabled, this subnet will not be initialized (thus not useable) after the configuration is applied. [FW:E2148.AC.1:4.12.0.1]	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.13
configIpSubnetAutoStart Define whether, after installation and initialization, the subnet is activated immediately (when configuration is applied) or only when a suitable event happens. See the 'L3 network toggle' action in the Alarms/Events s…	TriStater/w Type Values: 0 default 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.14
configIpSubnetPeerDns If this subnet is a DHCP client, should the DNS obtained from the DHCP server replace the currently configured one? Set to 'Enable' to give preference to the DHCP-provided DNS. [FW:E2148.AC.1:4.12.0.1]	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.15
configIpSubnetDefaultRoute If this subnet is a DHCP client, should the server-provided default route replace the currently configured one? Set to 'Enable' to give preference to the DHCP server route. [FW:E2148.AC.1:4.12.0.1]	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.1.1.16

List of user defined network zones
[FW:E2148.AC.1:2.8.0.1]

configIpZonesEntry row .1.3.6.1.4.1.28097.8.1.2.3.1

Details about an IpFactory Zone
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpZoneIndex

Column	Syntax	OID
configIpZoneIndex Zone index	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.3.1.1
configIpZoneRowStatus row addition/deletion support [PF:zone_:1]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.3.1.2
configIpZoneFriendlyName Friendly name	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.3.1.3
configIpZoneNAT Enable / Disable network address translation	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.2.3.1.4
configIpZoneMSSClamping Enable / Disable MSS Clamping	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.2.3.1.5
configIpZoneDefaultAcceptancePolicy Default packet acceptance policy	Enumerationr/w Enumerated Values: 1 allenable 2 alldisable	.1.3.6.1.4.1.28097.8.1.2.3.1.6
configIpZoneRestrictedAddressFamily Restrict action on the given IP address family. Attention:WaveOS supports only IPV4.	Enumerationr/w Enumerated Values: 1 ipv4ipv6 2 ipv4 3 ipv6	.1.3.6.1.4.1.28097.8.1.2.3.1.7
configIpZoneConnectionTracking Enable / Disable connection tracking	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.2.3.1.8
configIpZoneLogging Enable / Disable logging for this zone	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.1.2.3.1.9
configIpZoneLoggingLimit Defines the limit of logging messages per unit of time for this zone. This octet string is defined as : N[/T]. Where N is the number of messages and T is one of:second, minute, hour or day. If the time unit (slash inclu…	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.3.1.10
configIpZoneInterfaces The (space separated) interface list of network devices using this zone	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.3.1.11

List of IP forward rules, allows to redirect the input traffic on one zone to a device on private zone.
Attention: This rule can be set when NAT is disabled but it's used only if NAT is enabled
[FW:E2148.AC.1:2.8.0.1]

configIpNatIpForwardEntry row .1.3.6.1.4.1.28097.8.1.2.4.1

Details about an IP forward rule
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpNatIpForwardIndex

Column	Syntax	OID
configIpNatIpForwardIndex IP forward rule index	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.4.1.1
configIpNatIpForwardRowStatus row addition/deletion support [PF:rule_:1]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.4.1.2
configIpNatIpForwardFriendlyName Friendly name	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.4.1.3
configIpNatIpForwardZoneName Zone this rule belongs to	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.4.1.4
configIpNatIpForwardSrcIp Source IP	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.4.1.5
configIpNatIpForwardProtocol IP protocol	Enumerationr/w Enumerated Values: 1 all 2 tcp 3 udp 4 tcpudp 5 icmp	.1.3.6.1.4.1.28097.8.1.2.4.1.6
configIpNatIpForwardPublicPort Public port	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.4.1.7
configIpNatIpForwardPrivatePort Private port	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.4.1.8
configIpNatIpForwardTargetIp The destination IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.4.1.9

List of ip firewall rules on specified zone
[FW:E2148.AC.1:2.8.0.1]

configIpFirewallEntry row .1.3.6.1.4.1.28097.8.1.2.5.1

Details about an IP firewall rule
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpFirewallIndex

Column	Syntax	OID
configIpFirewallIndex Ip forward rule index	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.5.1.1
configIpFirewallRowStatus row addition/deletion support [PF:rule_:1]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.5.1.2
configIpFirewallZoneName Zone this rule belongs to	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.5.1.3
configIpFirewallProtocol Transport protocol	Enumerationr/w Enumerated Values: 1 all 2 tcp 3 udp 4 tcpudp 5 icmp 6 gre	.1.3.6.1.4.1.28097.8.1.2.5.1.4
configIpFirewallPort IP port	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.5.1.5
configIpFirewallAction Action to take when the rule applies	Enumerationr/w Enumerated Values: 1 forward 2 reject 3 drop	.1.3.6.1.4.1.28097.8.1.2.5.1.6
configIpFirewallDestZone Destination zone. If left blank, local interface is selected.	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.5.1.7
configIpFirewallSrcIP The source IP of this firewall rule [FW:E2148.AC.1:3.12.8.1]	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.5.1.8
configIpFirewallTargetIP The destination IP of this firewall rule [FW:E2148.AC.1:3.12.8.1]	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.5.1.9

List of IP static routes
[FW:E2148.AC.1:2.8.0.1]

configIpRoutesEntry row .1.3.6.1.4.1.28097.8.1.2.6.1

Details about an IP static route
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpRoutesIndex

Column	Syntax	OID
configIpRoutesIndex Static route index	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.2.6.1.1
configIpRoutesRowStatus row addition/deletion support	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.6.1.2
configIpRoutesNetwork Network this rule is attached to	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.6.1.3
configIpRoutesTarget Target IP or network	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.6.1.4
configIpRoutesNetmask Target network. If target is a network	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.6.1.5
configIpRoutesGateway IP gateway	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.6.1.6
configIpRoutesMetric Packet metric	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.2.6.1.7
configIpRoutesMTU Packet MTU	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.2.6.1.8

List of zone forward rules
[FW:E2148.AC.1:2.8.0.1]

configIpZoneForwardEntry row .1.3.6.1.4.1.28097.8.1.2.7.1

Details about a zone forward rule
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpZoneForwardIndex

Column	Syntax	OID
configIpZoneForwardIndex Zone forwarding index	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.2.7.1.1
configIpZoneForwardRowStatus row addition/deletion support	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.7.1.2
configIpZoneForwardSrc Source Zone	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.7.1.3
configIpZoneForwardDst Destination Zone	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.7.1.4

List of DSCP tagging rules
[FW:E2148.AC.1:2.8.0.1]

configIpDscpTaggingEntry row .1.3.6.1.4.1.28097.8.1.2.8.1

Details about a DSCP tagging rule
[FW:E2148.AC.1:2.8.0.1]

Indexes

configIpDscpTaggingIndex

Column	Syntax	OID
configIpDscpTaggingIndex DSCP tagging rule index Enter a memonic name for this rule. Only letters, digits and underscores	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.8.1.1
configIpDscpTaggingRowStatus row addition/deletion support	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.1.2.8.1.2
configIpDscpTaggingFriendlyName Rule friendly name	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.8.1.3
configIpDscpTaggingProtocol The protocol filter	Enumerationr/w Enumerated Values: 1 all 2 tcp 3 udp 4 icmp	.1.3.6.1.4.1.28097.8.1.2.8.1.4
configIpDscpTaggingSrcIP The source IP filter	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.8.1.5
configIpDscpTaggingDstIP The destination IP filter	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.1.2.8.1.6
configIpDscpTaggingSrcPort The source port filter	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.8.1.7
configIpDscpTaggingDstPort The destination port filter	OctetStringr/w	.1.3.6.1.4.1.28097.8.1.2.8.1.8
configIpDscpTaggingDscpValue The DSCP value applied by this rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.1.2.8.1.9

List of Wi-Fi radio devices
[FW:E2148.AC.1:2.8.0.1]

configPhyWifiEntry row .1.3.6.1.4.1.28097.8.2.1.1

Details about a Wi-Fi service set
[FW:E2148.AC.1:2.8.0.1]

Indexes

configPhyWifiName

Column	Syntax	OID
configPhyWifiName Symbolic identifier for the radio device	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.8.2.1.1.2
configPhyWifiLabel The label physically identifying the antennas set on the device [phywifi]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.1.1.3
configPhyWifiMAC MAC address of the radio device	PhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.28097.8.2.1.1.4
configPhyWifiEnable Configured state	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.2.1.1.5
configPhyWifiMode Configured 802.11 flavor. -1 indicates invalid value.	WifiFlavorr/w Type Values: 1 b-only 2 g-only 3 mixed-b-g 4 a-only 10 n-g 11 n-bg 12 n-a 16 ac	.1.3.6.1.4.1.28097.8.2.1.1.6
configPhyWifiCountry Country for regulatory checks on channel/power	OctetStringr/w Constraints: range: 0-5	.1.3.6.1.4.1.28097.8.2.1.1.7
configPhyWifiChannel Configured radio channel (frequency span index) A value of 0 indicates that your radio device is configured on multiple channels or automatic channel select. See configPhyWifiChannelList for more channel details. Ignore…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.2.1.1.8
configPhyWifiHTMode 802.11n channel width. Double (40) width is subject to automatic availability checking before use.	Enumerationr/w Enumerated Values: 1 ht20 2 ht40-below 3 ht40-above 4 ht40-auto 5 vht20 6 vht40 7 vht80	.1.3.6.1.4.1.28097.8.2.1.1.9
configPhyWifiTxPowerDBM Configured radio transmit power limit in dBm. To transmit with the maximum allowed power, use value '-1'.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.2.1.1.10
configPhyWifiDistance Configured maximum distance between AP and stations (meters)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.2.1.1.11
configPhyWifiClusterMode Cluster mode, empty for none, 'dualscan' for data/scan separation	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.28097.8.2.1.1.12
configPhyWifiClusterList List of device names in the cluster, e.g. 'radio0 radio1'	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.28097.8.2.1.1.13
configPhyWifiClusterArgs Cluster params for this device. For 'dualscan' mode, one device must be set to 'scan', the others in the cluster must be set to 'data'.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.28097.8.2.1.1.14
configPhyWifiAntennaPorts Antenna port configuration.	Enumerationr/w Enumerated Values: 1 port1 3 ports12 7 ports123	.1.3.6.1.4.1.28097.8.2.1.1.15
configPhyWifiABGBasicRates Space separated list of basic rates (in kbps). A value of 0 indicates that your radio device is configured on automatic basic rate.	OctetStringr/w Constraints: range: 4-66	.1.3.6.1.4.1.28097.8.2.1.1.16
configPhyWifiABGSupportedRates Space separated list of supported rates (in kbps). A value of 0 indicates that your radio device is configured on automatic supported rate.	OctetStringr/w Constraints: range: 4-66	.1.3.6.1.4.1.28097.8.2.1.1.17
configPhyWifiChannelList Configured radio channel list: Display/enter one or several channels, separated by spaces. 'auto' or '0' indicates automatic channel select. Ignored in client roaming mode, see configIfStaScanChannels instead.	OctetStringr/w	.1.3.6.1.4.1.28097.8.2.1.1.18
configPhyWifiWids WIDS functions selection. 0: radio is not reserved for WIDS (default). 1: radio is reserved for rogue AP monitoring. [FW:E2148.AC.1:4.16.0.1]	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.2.1.1.19

List of Cellular radio devices
[FW:E2148.AC.1:4.12.0.1]

configPhyCellEntry row .1.3.6.1.4.1.28097.8.2.2.1

Details about a cellular radio device

Indexes

configPhyCellName

Column	Syntax	OID
configPhyCellName Symbolic identifier for the radio device	NetifName Type Constraints: range: 0..32	.1.3.6.1.4.1.28097.8.2.2.1.1
configPhyCellLabel The label physically identifying the plugs/indicators on the device box [PF:wwan:0]	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.2
configPhyCellDisableAtBoot Set the card to be forcibly disabled at boot time. If set to Enable, the associated network will be initially disabled after reboots. If set to Disable, the associated network will obey its existing configuration.	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.2.2.1.3
configPhyCellLogAT Enable logging of internal AT commands/responses	DisableEnabler/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.28097.8.2.2.1.4
configPhyCellSIM Default SIM/UICC activated at startup (for Dual SIM Single Standby radios)	Enumerationr/w Enumerated Values: 1 sim1 2 sim2	.1.3.6.1.4.1.28097.8.2.2.1.5
configPhyCellSetPIN Not implemented. New PIN code value to set in the *currently selected* SIM card. Reading this OID returns nothing. WARNING 1: the corresponding configPhyCellSim(1/2)Pin OID will retain its previous value; you must set i…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.6
configPhyCellSetPUK Not implemented. PUK code required to reset the PIN code of the *currently selected* SIM card to the value of configPhyCellSetPIN. Use this only if the SIM is locked after an excessive number of PIN code errors Reading …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.7
configPhyCellSetPINStatus Not implemented. Status of a write operation to configPhyCellSetPIN / configPhyCellSetPUK. set-init: no operation was requested yet set-more: more data (PUK code) needed set-wait: operation in progress set-ok: operation…	AsyncSetStatus Type Values: 0 set-init 1 set-more 2 set-wait 3 set-ok 4 set-fail	.1.3.6.1.4.1.28097.8.2.2.1.8
configPhyCellSim1Pin PIN code required to enable the SIM card	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.9
configPhyCellSim1Apn APN - Name of the cellular sub-service for IP. If left empty, the default subscriber's APN will be used	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.10
configPhyCellSim1Authentication Authentication type towards the Telecom network	CellSecurityProtocolr/w Type Values: 0 none 1 pap 2 chap	.1.3.6.1.4.1.28097.8.2.2.1.11
configPhyCellSim1Identity User name for PAP/CHAP authentication	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.12
configPhyCellSim1Password User password for PAP/CHAP authentication	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.13
configPhyCellSim2Pin PIN code required to enable the SIM card	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.14
configPhyCellSim2Apn APN - Name of the cellular sub-service for IP. If left empty, the default subscriber's APN will be used	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.15
configPhyCellSim2Authentication Authentication type towards the Telecom network	CellSecurityProtocolr/w Type Values: 0 none 1 pap 2 chap	.1.3.6.1.4.1.28097.8.2.2.1.16
configPhyCellSim2Identity User name for PAP/CHAP authentication	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.17
configPhyCellSim2Password User password for PAP/CHAP authentication	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.28097.8.2.2.1.18

List of radius servers currently defined
[FW:E2148.AC.1:2.8.0.1]

configRadiusEntry row .1.3.6.1.4.1.28097.8.3.1.1.1

Details about a radius server
[FW:E2148.AC.1:2.8.0.1]

Indexes

configRadiusIndex

Column	Syntax	OID
configRadiusIndex Radius index, maximum 4 items support	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.3.1.1.1.1
configRadiusRowStatus row addition/deletion support	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.3.1.1.1.2
configRadiusIpAddress Radius IPv4 address	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.1.1.3
configRadiusPort Radius UDP port	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.28097.8.3.1.1.1.4
configRadiusSecret Radius shared secret	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.1.1.5

List of filter group.
[FW:E2148.AC.1:2.8.0.1]

configFilterGroupEntry row .1.3.6.1.4.1.28097.8.3.1.3.1

Details about a filter group
[FW:E2148.AC.1:2.8.0.1]

Indexes

configFilterGroupIndex

Column	Syntax	OID
configFilterGroupIndex filter group index	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.3.1.1
configFilterGroupRowStatus row addition/deletion support [PF:fgroup_:1]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.3.1.3.1.2
configFilterGroupFriendlyName Filter group friendly name (as displayed in the web UI)	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.3.1.3

List of filter group rules.
[FW:E2148.AC.1:2.8.0.1]

configFilterGroupRuleEntry row .1.3.6.1.4.1.28097.8.3.1.4.1

Details about a filter rule
[FW:E2148.AC.1:2.8.0.1]

Indexes

configFilterGroupRuleIndex

Column	Syntax	OID
configFilterGroupRuleIndex filter group rule index	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.4.1.1
configFilterGroupRuleRowStatus row addition/deletion support [PF:frule_:1]	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.28097.8.3.1.4.1.2
configFilterGroupGroupIndex Filter group to which the rule belongs to	OctetStringr/w	.1.3.6.1.4.1.28097.8.3.1.4.1.3
configFilterGroupRuleMACFrameType Type of frame	Enumerationr/w Enumerated Values: -255 invalid 1 nofilter 2 unicast 3 broadcast 4 multicast	.1.3.6.1.4.1.28097.8.3.1.4.1.4
configFilterGroupRuleCheckMAC frame MAC field to check	Enumerationr/w Enumerated Values: -255 invalid 1 source 2 destination	.1.3.6.1.4.1.28097.8.3.1.4.1.5
configFilterGroupRuleNetworkProtocol Network protocol. nofilter(-1), IP(-2), ARP(-3), (>0) for custom protocol. IP and ARP are shortcuts for 2048 (0x800) and 2054 (0x806) -255: invalid value	Enumerationr/w Enumerated Values: -255 invalid -3 arp -2 ip -1 nofilter	.1.3.6.1.4.1.28097.8.3.1.4.1.6
configFilterGroupRuleIpAddress Group rule filter IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.3.1.4.1.7
configFilterGroupRuleNetmask Group rule filter netmask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.28097.8.3.1.4.1.8
configFilterGroupRuleCheckIP IP frame field to check	Enumerationr/w Enumerated Values: -255 invalid 1 source 2 destination	.1.3.6.1.4.1.28097.8.3.1.4.1.9
configFilterGroupRuleTransportProtocol Type of transport protocol	Enumerationr/w Enumerated Values: -255 invalid 1 nofilter 2 udp 3 tcp 4 icmp	.1.3.6.1.4.1.28097.8.3.1.4.1.10
configFilterGroupRuleFirstPort Lower bound of port selection -255: invalid value	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.28097.8.3.1.4.1.11
configFilterGroupRuleLastPort Upper bound of port selection -255: invalid value	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.28097.8.3.1.4.1.12
configFilterGroupRuleCheckPort Transport field to check	Enumerationr/w Enumerated Values: -255 invalid 1 source 2 destination	.1.3.6.1.4.1.28097.8.3.1.4.1.13