A3COM-SWITCHING-SYSTEMS-MIB Table View

This table provides information on recorded system events.

a3ComSysSystemLogEntry row .1.3.6.1.4.1.43.29.4.1.27.4.1

A system log entry.

Indexes

a3ComSysSystemLogIndex

Column	Syntax	OID
a3ComSysSystemLogIndexmandatory The index of the log entry relative to this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.1.27.4.1.1
a3ComSysSystemLogSeverityLevelmandatory Indicates the severity level of the log entry.	Enumeration Enumerated Values: 1 information 2 warning 3 error 4 fatal	.1.3.6.1.4.1.43.29.4.1.27.4.1.2
a3ComSysSystemLogDateTimemandatory Indicates the date and time of the log event and is formatted as follows: MM:DD:YY HH:MM:SS.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.1.27.4.1.3
a3ComSysSystemLogFacilitymandatory The facility which entered the event in the log. fcmlmm(6) represents those events which may be common to the Lanplex Management Module (LMM) and the FDDI Concentrator Module (FCM). lmmfddi(6) represents those events …	Enumeration Enumerated Values: 1 exception 2 operatingSystem 3 assertion 4 spanningTree 5 fcmlmm 6 lmmfddi 7 lmmboard 8 esm 9 trsm 10 efsm 11 fsm 12 hsi	.1.3.6.1.4.1.43.29.4.1.27.4.1.4
a3ComSysSystemLogMessagemandatory The recorded log message.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.1.27.4.1.5

A list of slot entries.  A single entry exists in this
list for each slot in the chassis.

a3ComSysSlotEntry row .1.3.6.1.4.1.43.29.4.2.2.1

A slot entry contains information about a particular
slot.

Indexes

a3ComSysSlotIndex

Column	Syntax	OID
a3ComSysSlotIndexmandatory The index of the slot identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.2.2.1.1
a3ComSysSlotBoardTypemandatory The type of board residing in the slot identified by this entry.	Enumeration Enumerated Values: 1 other 2 emptyLocation 7 esmBoard 8 fcmBoard 9 lmmBoard 10 efsmBoard 11 trsmBoard 12 tmmBoard 13 fsmBoard 14 fesmBoard	.1.3.6.1.4.1.43.29.4.2.2.1.2
a3ComSysSlotBoardRevisionmandatory The revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length string.	OctetString Constraints: range: 0-1	.1.3.6.1.4.1.43.29.4.2.2.1.3
a3ComSysSlotBoardStatusmandatory The status of the board in the slot identified by this entry.	Enumeration Enumerated Values: 1 notPresent 2 testing 3 offline 4 online	.1.3.6.1.4.1.43.29.4.2.2.1.4
a3ComSysSlotBoardNamemandatory The text string describing the board in the slot identified by this entry.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.43.29.4.2.2.1.5
a3ComSysSlotBoardNameAbbrevmandatory The abbreviation used to describe the board in the slot identified by this entry.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.43.29.4.2.2.1.6
a3ComSysSlotEthernetPortCountmandatory The count of ethernet ports in the slot identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.2.2.1.7
a3ComSysSlotFddiMacCountmandatory The count of FDDI MACs in the slot identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.2.2.1.8
a3ComSysSlotFddiPortCountmandatory The count of FDDI ports in the slot identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.2.2.1.9
a3ComSysSlotOvertemperaturemandatory This object indicates the current overtemperature status for the slot. If the slot does not support overtemperature detection, this object returns notSupported.	Enumeration Enumerated Values: 1 true 2 false 3 notSupported	.1.3.6.1.4.1.43.29.4.2.2.1.10
a3ComSysSlotTokenRingPortCountmandatory The count of TokenRing ports in the slot identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.2.2.1.11
a3ComSysSlotBoardRevStrmandatory This revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length string. The format of the string is XX.YY, where the XX is the…	OctetString Constraints: range: 0-5	.1.3.6.1.4.1.43.29.4.2.2.1.12
a3ComSysSlotConverterBadmandatory This object indicates the current status +12V->+5V converter for the slot. If the slot does not support +12V->+5V converter detection, this object returns notSupported.	Enumeration Enumerated Values: 1 true 2 false 3 notSupported	.1.3.6.1.4.1.43.29.4.2.2.1.13

A list of power supply status entries.

a3ComSysPowerSupplyStatusEntry row .1.3.6.1.4.1.43.29.4.4.2.1

A power supply status entry contains information about a
particular power supply.

Indexes

a3ComSysPowerSupplyStatusIndex

Column	Syntax	OID
a3ComSysPowerSupplyStatusIndexmandatory The unique index of the power supply identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.4.2.1.1
a3ComSysPowerSupplyStatusmandatory This object represents the power supply status. The value is a sum. It initially takes on the value 0, then for each type which is active, 2 raised to a power is added to the sum. The powers are according to the follo…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.4.2.1.2
a3ComSysPowerSupplyStatusSupportedmandatory This object represents the various power supply status types which are supported. The value is a sum. It initially takes on the value 0, then for each type which is supported, 2 raised to a power is added to the sum.…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.4.2.1.3

A list of SNMP internal agent proxy entries.  An entry in
this table exists for each agent in the system that can be
reached by this agent via the internal proxy mechanism.

a3ComSysSnmpInternalProxyEntry row .1.3.6.1.4.1.43.29.4.5.7.1

An entry identifies the communities available for
communicating with another agent in the system via the
internal proxy mechanism.

Indexes

a3ComSysSnmpInternalProxyAgentId a3ComSysSnmpInternalProxyAccessClass

Column	Syntax	OID
a3ComSysSnmpInternalProxyAgentIdmandatory The id of the agent identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.5.7.1.1
a3ComSysSnmpInternalProxyAccessClassmandatory The access to MIB objects supported by the agent identified by this entry provided by this agent, when using the community string identified by the corresponding value of a3ComSysSnmpInternalProxyCommunity.	Enumeration Enumerated Values: 1 readOnly 2 readWrite	.1.3.6.1.4.1.43.29.4.5.7.1.2
a3ComSysSnmpInternalProxyCommunitymandatory A community which allows access to MIB objects supported by the agent identified by this entry.	OctetString	.1.3.6.1.4.1.43.29.4.5.7.1.3

This table contains a listing of trap descriptions for
each trap supported by this agent.  This 
provides a relationship between a trap index, and the trap
enterprise oid and trap number for a given trap.  In all
cases except for the MIB-2 generic traps, the enterprise
under which a trap is defined is the same as that
appearing in the ENTERPRISE portion of the trap.

a3ComSysAgentTrapDescriptionTableEntry row .1.3.6.1.4.1.43.29.4.6.5.1

Information relating a trap index to a specific trap
enterprise oid and trap number.

Indexes

a3ComSysAgentTrapDescriptionIndex

Column	Syntax	OID
a3ComSysAgentTrapDescriptionIndexmandatory A unique index corresponding to the trap described by this entry. This value of this object corresponding to a particular trap will remain constant accross system resets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.6.5.1.1
a3ComSysAgentTrapEnterprisemandatory The enterpise under which the trap identified by this entry is defined.	ObjectIdentifier	.1.3.6.1.4.1.43.29.4.6.5.1.2
a3ComSysAgentTrapNumbermandatory The number of the trap identified by this entry, within the enterprise where it is defined.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.6.5.1.3

This table contains information specifying which traps
will be transmitted to a given destination address.  The
table is indexed by the destination address type and
destination address.  Each entry in the table with a
status of valid identifies a set of traps which, when
generated, will be transmitted to the corresponding
destination address listed in that entry.

a3ComSysAgentTrapDestinationTableEntry row .1.3.6.1.4.1.43.29.4.6.6.1

Information relating a set of traps and a destination
address to which each trap in ths set will be transmitted
when it is generated. To create a new entry, set a
non-existent instance of a3ComSysAgentTrapDestinationTr…

Indexes

a3ComSysAgentTrapDestinationAddressType a3ComSysAgentTrapDestinationAddress

Column	Syntax	OID
a3ComSysAgentTrapDestinationAddressTypemandatory The type of address identified by this entry.	Enumeration Enumerated Values: 1 ip	.1.3.6.1.4.1.43.29.4.6.6.1.1
a3ComSysAgentTrapDestinationAddressmandatory The address, of the type specified by the corresponding value of a3ComSysAgentTrapDestinationAddressType, to which the set of traps identified by this entry are to be transmitted.	OctetString	.1.3.6.1.4.1.43.29.4.6.6.1.2
a3ComSysAgentTrapDestinationTrapMaskmandatory This value is a bit string that indicates which traps are enabled for the address identified by this entry. The octet string value is treated as a 64-bit value. The value is a sum. It initially takes on the value 0, t…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.43.29.4.6.6.1.3
a3ComSysAgentTrapDestinationEntryStatusmandatory The status of the trap destination table entry. Setting this object to invalid(1) has the effect of removing the corresponding entry from the table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.6.6.1.4

A list of interface location entries.  A single entry
exists in this list for each interface managed by this
agent.

a3ComSysInterfaceLocationEntry row .1.3.6.1.4.1.43.29.4.7.1.1

An interface location entry describes the location of
a particular interface managed by this agent.

Indexes

a3ComSysInterfaceLocationIfIndex

Column	Syntax	OID
a3ComSysInterfaceLocationIfIndexmandatory The value of the MIB-II ifIndex corresponding to the interface identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.7.1.1.1
a3ComSysInterfaceLocationInterfaceTypemandatory The type of the physical implementation of the interface identified by this entry.	Enumeration Enumerated Values: 1 other 2 ethernetPort 3 fddiMac 4 tokenringPort 5 atmPort	.1.3.6.1.4.1.43.29.4.7.1.1.2
a3ComSysInterfaceLocationTypemandatory The type of location where the interface identified by this entry is physically located.	Enumeration Enumerated Values: 1 other 2 modularSlot 3 chassis 4 modularCard	.1.3.6.1.4.1.43.29.4.7.1.1.3
a3ComSysInterfaceLocationTypeIndexmandatory The index of the location identified by the corresponding instance of a3ComSysInterfaceLocationType where the interface identified by this entry is physically located.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.7.1.1.4
a3ComSysInterfaceLocationLocalIndexmandatory The local index of the interface identified by this entry relative to its type specified by the corresponding value of a3ComSysInterfaceLocationInterfaceType, and the location specified by the corresponding values of a3…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.7.1.1.5
a3ComSysInterfaceLocationSystemModuleIndexmandatory The system module index of the interface idnetified by this entry. Ths index can be used to acquire the module information from the s2SysModuleCardGroup and the a3ComSysDiagnosticsGroup groups.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.7.1.1.6

A list of ethernet port entries.  A single entry exists
in this list for each ethernet port managed by this agent.

a3ComSysEthernetPortEntry row .1.3.6.1.4.1.43.29.4.8.2.1

An ethernet port entry contains information about a
particular ethernet port managed by this agent.

Indexes

a3ComSysEthernetPortIndex

Column	Syntax	OID
a3ComSysEthernetPortIndexmandatory The index of the ethernet port identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.2.1.1
a3ComSysEthernetPortIfIndexmandatory The value of the MIB-II ifIndex corresponding to the ethernet port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.2.1.2
a3ComSysEthernetPortLabelmandatory An ASCII text string describing the ethernet port identified by this entry.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.43.29.4.8.2.1.3
a3ComSysEthernetPortLinkStatusmandatory The current value of the link status for the ethernet port identified by this entry.	Enumeration Enumerated Values: 1 active 2 inActive	.1.3.6.1.4.1.43.29.4.8.2.1.4
a3ComSysEthernetPortTypemandatory Specific port type description for the ethernet port identified by this entry.	Enumeration Enumerated Values: 1 rj2110BaseT 2 rj4510BaseT 3 st10BaseFL 4 aui 5 bnc10Base2 6 other 7 rj45100BaseT 8 sc100BaseFx 9 untermBnc10Base2 10 sc1000BaseLxSm 11 sc1000BaseLxMm 12 sc1000BaseLxSmMm 13 sc1000BaseLx10km 14 sc1000BaseSx 15 hssdc1000BaseCx 16 db91000BaseCx 17 gbicNotPresent 18 gbic1000BaseCxDb9 19 gbic1000BaseCxHssdc 20 gbic1000BaseLx10Km 21 gbic1000BaseLx 22 gbic1000BaseSx 23 rj451000BaseT 24 port1000NotPresent	.1.3.6.1.4.1.43.29.4.8.2.1.5

A list of ethernet port rate entries.  A single entry
exists in this list for each ethernet port, managed by
this agent, which supports rate information.

a3ComSysEthernetPortRateEntry row .1.3.6.1.4.1.43.29.4.8.3.1

An ethernet port rate entry contains rate statistics for a
particular ethernet port managed by this agent. Rate
statistics are calculated based on a one second sampling
interval.

Indexes

a3ComSysEthernetPortRateIndex

Column	Syntax	OID
a3ComSysEthernetPortRateIndexmandatory The index of the ethernet port identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.1
a3ComSysEthernetPortRateByteReceiveRatemandatory The average number of bytes received per second by the ethernet port identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.2
a3ComSysEthernetPortRatePeakByteReceiveRatemandatory The peak value of a3ComSysEthernetPortRateByteReceiveRate since the system was last initialized for the ethernet port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.3
a3ComSysEthernetPortRateFrameReceiveRatemandatory The average number of frames received per second by the ethernet port identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.4
a3ComSysEthernetPortRatePeakFrameReceiveRatemandatory The peak value of a3ComSysEthernetPortRateFrameReceiveRate since the system was last initialized for the ethernet port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.5
a3ComSysEthernetPortRateByteTransmitRatemandatory The average number of bytes transmitted per second by the ethernet port identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.6
a3ComSysEthernetPortRatePeakByteTransmitRatemandatory The peak value of a3ComSysEthernetPortRateByteTransmitRate since the system was last initialized for the ethernet port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.7
a3ComSysEthernetPortRateFrameTransmitRatemandatory The average number of frames transmitted per second by the ethernet port identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.8
a3ComSysEthernetPortRatePeakFrameTransmitRatemandatory The peak value of a3ComSysEthernetPortRateFrameTransmitRate since the system was last initialized for the ethernet port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.8.3.1.9

A list of FDDI MAC beacon entries.  A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports MAC beacon history.

a3ComSysSmtFddiMacBeaconEntry row .1.3.6.1.4.1.43.29.4.9.4.1

An FDDI MAC beacon entry contains information about a
particular FDDI MAC's beacon history.

Indexes

a3ComSysSmtFddiMacBeaconSmtIndex a3ComSysSmtFddiMacBeaconIndex

Column	Syntax	OID
a3ComSysSmtFddiMacBeaconSmtIndexmandatory The index of the SMT instance identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.4.1.1
a3ComSysSmtFddiMacBeaconIndexmandatory The index of the FDDI MAC identified by this entry, within the SMT identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.4.1.2
a3ComSysSmtFddiMacBeaconHistorymandatory This object gives a history of the most recent beacon information received on the FDDI MAC identified by this entry. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes …	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.43.29.4.9.4.1.3

A list of FDDI MAC rate entries.  A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports rate statistics.

a3ComSysSmtFddiMacRateEntry row .1.3.6.1.4.1.43.29.4.9.5.1

An FDDI MAC rate entry contains rate statistics for a
particular FDDI MAC managed by this agent. Rate statistics
are calculated based on a one second sampling interval.

Indexes

a3ComSysSmtFddiMacRateSmtIndex a3ComSysSmtFddiMacRateIndex

Column	Syntax	OID
a3ComSysSmtFddiMacRateSmtIndexmandatory The index of the SMT instance identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.1
a3ComSysSmtFddiMacRateIndexmandatory The index of the FDDI MAC identified by this entry, within the SMT identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.2
a3ComSysSmtFddiMacRateByteReceiveRatemandatory The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.3
a3ComSysSmtFddiMacRatePeakByteReceiveRatemandatory The peak value of a3ComSysSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.4
a3ComSysSmtFddiMacRateFrameReceiveRatemandatory The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.5
a3ComSysSmtFddiMacRatePeakFrameReceiveRatemandatory The peak value of a3ComSysSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.6
a3ComSysSmtFddiMacRateByteTransmitRatemandatory The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.7
a3ComSysSmtFddiMacRatePeakByteTransmitRatemandatory The peak value of a3ComSysSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.8
a3ComSysSmtFddiMacRateFrameTransmitRatemandatory The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.9
a3ComSysSmtFddiMacRatePeakFrameTransmitRatemandatory The peak value of a3ComSysSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.5.1.10

A list of FDDI port entries.  A single entry exists in
this list for each FDDI port managed by this agent.

a3ComSysSmtFddiPortEntry row .1.3.6.1.4.1.43.29.4.9.6.1

An FDDI port entry contains information about a particular
FDDI port managed by this agent.

Indexes

a3ComSysSmtFddiPortSmtIndex a3ComSysSmtFddiPortIndex

Column	Syntax	OID
a3ComSysSmtFddiPortSmtIndexmandatory The index of the SMT instance identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.6.1.1
a3ComSysSmtFddiPortIndexmandatory The index of the FDDI port identified by this entry, within the SMT identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.6.1.2
a3ComSysSmtFddiPortLocationTypemandatory The type of location where the FDDI port identified by this entry is physically located.	Enumeration Enumerated Values: 1 other 2 modularSlot 3 chassis 4 modularCard	.1.3.6.1.4.1.43.29.4.9.6.1.3
a3ComSysSmtFddiPortLocationTypeIndexmandatory The index of the location identified by the corresponding instance of a3ComSysSmtFddiPortLocationType where the FDDI port identified by this entry is physically located.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.6.1.4
a3ComSysSmtFddiPortLocationLocalIndexmandatory The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of a3ComSysSmtFddiPortLocationType and a3ComSysSmtFddiPortLocationTypeIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.6.1.5
a3ComSysSmtFddiPortLabelmandatory An ASCII text string describing the FDDI port identified by this entry.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.43.29.4.9.6.1.6

An FDDI MAC Location table contains information to assign
an FDDI MAC to a different Location.  The system must be
rebooted after all changes to this table are completed
in order that the changes take effect.

a3ComSysSmtFddiMacLocationEntry row .1.3.6.1.4.1.43.29.4.9.7.1

An FDDI MAC entry contains information to assign
an FDDI MAC to a different Location.

Indexes

a3ComSysSmtFddiMacLocationSmtIndex a3ComSysSmtFddiMacLocationIndex

Column	Syntax	OID
a3ComSysSmtFddiMacLocationSmtIndexmandatory The index of the SMT instance identified by this entry, relative to the agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.7.1.1
a3ComSysSmtFddiMacLocationIndexmandatory The index of the FDDI MAC instance identified by this entry, relative to the SMT identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.7.1.2
a3ComSysSmtFddiMacCurrentLocationmandatory Indicates whether the MAC identified by this entry is assigned to a backplane FDDI station (internal) or an FDDI station configured on a module (external.)	Enumeration Enumerated Values: 1 internalBackplane 2 externalFddiPort	.1.3.6.1.4.1.43.29.4.9.7.1.3
a3ComSysSmtFddiMacRequestedLocationmandatory The Location which the MAC identified by this entry is to be assigned to during the next reboot.	Enumerationr/w Enumerated Values: 1 internalBackplane 2 externalFddiPort	.1.3.6.1.4.1.43.29.4.9.7.1.4
a3ComSysSmtFddiMacAvailableLocationmandatory Indicates the Location(s) available for this MAC. A mac Location which can be modified to either the interanl backplane or an external FDDI port is indicated by internalOrExternal(3).	Enumeration Enumerated Values: 1 internalBackplane 2 externalFddiPort 3 internalOrExternal	.1.3.6.1.4.1.43.29.4.9.7.1.5

An FDDI station MAC table contains information to assign
an FDDI MAC to an FDDI Station.  The system must be
rebooted after all changes to this table are completed 
in order that the changes take effect.

a3ComSysSmtFddiMacStationEntry row .1.3.6.1.4.1.43.29.4.9.8.1

An FDDI MAC entry contains information to assign
an FDDI MAC to an FDDI Station.

Indexes

a3ComSysSmtFddiMacStationSmtIndex a3ComSysSmtFddiMacStationIndex

Column	Syntax	OID
a3ComSysSmtFddiMacStationSmtIndexmandatory The index of the SMT instance identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.8.1.1
a3ComSysSmtFddiMacStationIndexmandatory The index of the MAC instance identified by this entry, relative to the SMT identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.8.1.2
a3ComSysSmtFddiMacCurrentStationmandatory Indicates which FDDI station that the FDDI MAC identified by this entry is assigned to. A value of 0 indicates that the mac is assigned to an external station. Otherwise the value represents the internal backplane stati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.8.1.3
a3ComSysSmtFddiMacRequestedStationmandatory Indicates which FDDI station the FDDI MAC identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. Otherwise the value represents the internal backplane station …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.8.1.4
a3ComSysSmtFddiMacAvailableStationsmandatory This value is a sum. Setting of the first bit (LSB) indicates that the MAC can be assigned to an external station. Available backplane stations are indicated by adding 2^StationNumber to the sum. Where StationNumber re…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.8.1.5

An FDDI station Port table contains information to assign
an FDDI Port to an FDDI Station.  The system must be
rebooted after all changes to this table are completed 
in order that the changes take effect.

a3ComSysSmtFddiPortStationEntry row .1.3.6.1.4.1.43.29.4.9.9.1

An FDDI Port entry contains information to assign
an FDDI Port to an FDDI Station.

Indexes

a3ComSysSmtFddiPortStationSmtIndex a3ComSysSmtFddiPortStationIndex

Column	Syntax	OID
a3ComSysSmtFddiPortStationSmtIndexmandatory The index of the SMT instance identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.9.1.1
a3ComSysSmtFddiPortStationIndexmandatory The index of the Port instance identified by this entry, relative to the SMT indentified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.9.1.2
a3ComSysSmtFddiPortCurrentStationmandatory Indicates which FDDI station the FDDI Port identified by this entry is assigned to. A value of 0 indicates that the Port is assigned to an external station. Otherwise the value represents the internal backplane station …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.9.1.3
a3ComSysSmtFddiPortRequestedStationmandatory Indicates which FDDI station the FDDI port identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. Otherwise the value represents the internal backplane station…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.9.1.4
a3ComSysSmtFddiPortAvailableStationsmandatory This value is a sum. Setting of the first bit indicates that the port can be assigned to an external station. Available backplane stations are indicated by adding 2^StationNumber to the sum. Where StationNumber represe…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.9.9.1.5

A list of bridge entries.  A single entry exists in this
list for each bridge managed by this agent.

a3ComSysBridgeEntry row .1.3.6.1.4.1.43.29.4.10.2.1

A bridge entry contains information about a particular
bridge managed by this agent.

Indexes

a3ComSysBridgeIndex

Column	Syntax	OID
a3ComSysBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.1
a3ComSysBridgePortCountmandatory The number of bridge ports that the bridge identified by this entry controls.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.2
a3ComSysBridgeAddressTableSizemandatory The size of the address table for the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.3
a3ComSysBridgeAddressTableCountmandatory The current count of addresses in the address table for the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.4
a3ComSysBridgeAddressTablePeakCountmandatory The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.5
a3ComSysBridgeAddressThresholdmandatory A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid val…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.6
a3ComSysBridgeModemandatory The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operat…	Enumerationr/w Enumerated Values: 1 expressMode 2 ieee8021dBridgeMode 3 notSupported 4 ieee8021dSRTBridgeMode 5 ieee8021dSRBridgeMode 6 ibmSRBridgeMode 7 srtBBridgeMode 8 srExpressBridgeMode	.1.3.6.1.4.1.43.29.4.10.2.1.7
a3ComSysBridgeBackbonePortmandatory The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object can range from 1 to the corresponding value of a3ComSysBrid…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.8
a3ComSysBridgeIpFragmentationEnabledmandatory A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value …	Enumerationr/w Enumerated Values: 1 true 2 false 3 notSupported	.1.3.6.1.4.1.43.29.4.10.2.1.9
a3ComSysBridgeTrFddiTranslationModemandatory The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whether they are left alone (used for traffic f…	Enumerationr/w Enumerated Values: 1 native 2 backbone	.1.3.6.1.4.1.43.29.4.10.2.1.10
a3ComSysBridgeSTPGroupAddressmandatory Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.10.2.1.11
a3ComSysBridgeSTPEnablemandatory This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1).	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.12
a3ComSysBridgeIpxSnapTranslationEnablemandatory This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.13
a3ComSysBridgeLowLatencyEnablemandatory This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.14
a3ComSysBridgeVlanModemandatory This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs within this bridge will share the same address table. Closed mod…	Enumerationr/w Enumerated Values: 1 open 2 closed 3 mixed 4 notSupported	.1.3.6.1.4.1.43.29.4.10.2.1.15

A list of bridge port entries.  A single entry exists in
this list for each bridge port managed by this agent.

a3ComSysBridgePortEntry row .1.3.6.1.4.1.43.29.4.10.3.1

A bridge port entry contains information about a
particular bridge port managed by this agent.

Indexes

a3ComSysBridgePortBridgeIndex a3ComSysBridgePortIndex

Column	Syntax	OID
a3ComSysBridgePortBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.3.1.1
a3ComSysBridgePortIndexmandatory The index of the bridge port identified by this entry, within the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.3.1.2
a3ComSysBridgePortIfIndexmandatory The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.3.1.3
a3ComSysBridgePortReceiveMulticastLimitmandatory This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, but can be determined by multiplying this value by the a3ComS…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.29.4.10.3.1.4
a3ComSysBridgePortAddressActionmandatory This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresse…	Enumerationr/w Enumerated Values: 1 other 2 freezeAddress 3 flushAddress 4 flushDynamicAddress	.1.3.6.1.4.1.43.29.4.10.3.1.5
a3ComSysBridgePortSpanningTreeFrameReceivedCountsmandatory The number of spanning tree frames received by the bridge port identified by this entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.6
a3ComSysBridgePortReceiveBlockedDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.7
a3ComSysBridgePortReceiveMulticastLimitExceededsmandatory The number of times the value of a3ComSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.8
a3ComSysBridgePortReceiveMulticastLimitExceededDiscardsmandatory The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of a3ComSysBridgePortReceiveMulticastLimit was exceeded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.9
a3ComSysBridgePortReceiveSecurityDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), whi…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.10
a3ComSysBridgePortReceiveUnknownDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid for backbone ports, and only when the bridge is operating in …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.11
a3ComSysBridgePortReceiveOtherDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.12
a3ComSysBridgePortReceiveErrorDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.13
a3ComSysBridgePortSameSegmentDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.14
a3ComSysBridgePortTransmitBlockedDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.15
a3ComSysBridgePortReceiveAllPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.16
a3ComSysBridgePortReceiveMulticastPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.17
a3ComSysBridgePortTransmitAllPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.18
a3ComSysBridgePortTransmitMulticastPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.19
a3ComSysBridgePortForwardedUnicastFramesmandatory The number of unicast frames which this port forwarded to a single destination port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.20
a3ComSysBridgePortForwardedUnicastOctetsmandatory The number of octets contained in unicast frames which this port forwarded to a single destination port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.21
a3ComSysBridgePortForwardedMulticastFramesmandatory The number of multicast frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.22
a3ComSysBridgePortForwardedMulticastOctetsmandatory The number of octets contained in multicast frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.23
a3ComSysBridgePortFloodedUnicastFramesmandatory The number of unicast frames which this port flooded to all other ports in the bridge.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.24
a3ComSysBridgePortFloodedUnicastOctetsmandatory The number of octets contained in unicast frames which this port flooded to all other ports in the bridge.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.25
a3ComSysBridgePortStpModemandatory The mode of the bridge port.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 remove	.1.3.6.1.4.1.43.29.4.10.3.1.26
a3ComSysBridgePortReceiveMulticastLimitFrameTypemandatory This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Devices attached to networks with predominantly high multicast tr…	Enumerationr/w Enumerated Values: 1 broadcastAndMulticast 2 broadcastOnly	.1.3.6.1.4.1.43.29.4.10.3.1.27
a3ComSysBridgePortForwardedFramesmandatory The number of frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.28
a3ComSysBridgePortReceiveMulticastLimitMultipliermandatory This variable determines the minimum setting for the multicast limit threshold. For example if this value equals 1000, and the a3ComSysBridgePortReceiveMulticastLimit variable equals 2 then no more than 2000 multicast …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.3.1.29

A list of bridge port address information.  A single
entry exists in this list for each learned address,
accross all bridge ports and all bridges managed by this
agent.

a3ComSysBridgePortAddressEntry row .1.3.6.1.4.1.43.29.4.10.5.1

An bridge port address entry contains information about a
particular bridge port address. To create a new entry,
set an instance of a3ComSysBridgePortAddressRemoteAddress with
the address index portion of the instance …

Indexes

a3ComSysBridgePortAddressBridgeIndex a3ComSysBridgePortAddressPortIndex a3ComSysBridgePortAddressIndex

Column	Syntax	OID
a3ComSysBridgePortAddressBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.1
a3ComSysBridgePortAddressPortIndexmandatory The index of the bridge port identified by this entry, within the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.2
a3ComSysBridgePortAddressIndexmandatory The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.3
a3ComSysBridgePortAddressRemoteAddressmandatory The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determ…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.10.5.1.4
a3ComSysBridgePortAddressTypemandatory This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.10.5.1.5
a3ComSysBridgePortAddressIsStaticmandatory A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) it the only valid for set operations.	Enumerationr/w Enumerated Values: 1 isStatic 2 isDynamic	.1.3.6.1.4.1.43.29.4.10.5.1.6
a3ComSysBridgePortAddressStaticPortmandatory If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.7
a3ComSysBridgePortAddressAgemandatory This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.8

A list of analyzer entries.  A single entry exists in this
list for each bridge port configured for an analyzer.

a3ComSysNetworkAnalyzerTableEntry row .1.3.6.1.4.1.43.29.4.12.1.1

An analyzer table entry contains information relating an
analyzer port address to the bridge and port index for that
analyzer.

The effect of creating an entry for a particular port is
to configure that port…

Indexes

a3ComSysNetworkAnalyzerBridgeIndex a3ComSysNetworkAnalyzerBridgePortIndex

Column	Syntax	OID
a3ComSysNetworkAnalyzerBridgeIndexmandatory The index of the bridge relative to this agent where the analyzer identified by this entry is configured.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.12.1.1.1
a3ComSysNetworkAnalyzerBridgePortIndexmandatory The index of the port relative to the bridge identified by this entry where the analyzer identified by this entry is configured.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.12.1.1.2
a3ComSysNetworkAnalyzerPhysicalAddressmandatory The physical address of the bridge port identified by the corresponding values of a3ComSysNetworkAnalyzerBridgeIndex and a3ComSysNetworkAnayzerBridgePortIndex.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.12.1.1.3
a3ComSysNetworkAnalyzerStatusmandatory The status of the entry. Setting the value of a non-existent instance of this object to valid(1) attempts to add the corresponding entry to the table. The effect of adding an entry to the table is to configure the por…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.12.1.1.4

A list of monitor port entries.  A single entry exists in
this for each bridge port being monitored.

a3ComSysNetworkPortMonitorTableEntry row .1.3.6.1.4.1.43.29.4.12.2.1

A port monitor table entry contains information relating a
bridge port being monitored with the address of the analyzer
which is being used to monitor the port.

The effect of creating an entry for a particu…

Indexes

a3ComSysNetworkPortMonitorBridgeIndex a3ComSysNetworkPortMonitorBridgePortIndex

Column	Syntax	OID
a3ComSysNetworkPortMonitorBridgeIndexmandatory The index of the bridge relative to this agent where the monitored port identified by this entry is located.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.12.2.1.1
a3ComSysNetworkPortMonitorBridgePortIndexmandatory The index of the port which is being monitored relative to the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.12.2.1.2
a3ComSysNetworkPortMonitorAnalyzerAddressmandatory The physical address of the port where the analyzer, which is monitoring the port identified by this entry, is located. Setting the value of a non-existent instance of this object attempts to add an entry to the table.…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.12.2.1.3
a3ComSysNetworkPortMonitorStatusmandatory The status of the entry. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of removing an entry from the table is to disable monitoring of …	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.12.2.1.4

A list of token ring port entries.  A single entry exists
in this list for each token ring port managed by this agent.

a3ComSysTokenRingPortEntry row .1.3.6.1.4.1.43.29.4.13.2.1

A token ring port entry contains information about a
particular token ring port managed by this agent.

Indexes

a3ComSysTokenRingPortIndex

Column	Syntax	OID
a3ComSysTokenRingPortIndexmandatory The index of the token ring port identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.13.2.1.1
a3ComSysTokenRingPortIfIndexmandatory The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.13.2.1.2
a3ComSysTokenRingPortLabelmandatory An ASCII text string describing the token ring port identified by this entry.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.43.29.4.13.2.1.3
a3ComSysTokenRingPortInsertStatusmandatory The current value of the link status for the token ring port identified by this entry.	Enumeration Enumerated Values: 1 inserted 2 deinserted	.1.3.6.1.4.1.43.29.4.13.2.1.4
a3ComSysTokenRingPortTypemandatory Specific port type description for the token ring port identified by this entry.	Enumeration Enumerated Values: 1 rj45 2 other	.1.3.6.1.4.1.43.29.4.13.2.1.5
a3ComSysTokenRingPortModemandatory The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into the port. This selection can only be made on ports 1 and 2 o…	Enumerationr/w Enumerated Values: 1 station 2 lobe	.1.3.6.1.4.1.43.29.4.13.2.1.6
a3ComSysTokenRingPortSpeedmandatory The current speed of the port. The default speed is sixteenMegabit.	Enumerationr/w Enumerated Values: 1 fourMegabit 2 sixteenMegabit 3 sixteenMegabitETR	.1.3.6.1.4.1.43.29.4.13.2.1.7
a3ComSysTokenRingPortLineErrorsmandatory This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between t…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.8
a3ComSysTokenRingPortBurstErrorsmandatory This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.9
a3ComSysTokenRingPortACErrorsmandatory This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is equal to C is equal to 0 without first receiving an AMP frame…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.10
a3ComSysTokenRingPortAbortTransErrorsmandatory This counter is incremented when a station transmits an abort delimiter while transmitting.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.11
a3ComSysTokenRingPortInternalErrorsmandatory This counter is incremented when a station recognizes an internal error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.12
a3ComSysTokenRingPortLostFrameErrorsmandatory This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip mode does not receive the trailer of the frame before the TR…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.13
a3ComSysTokenRingPortReceiveCongestionErrorsmandatory This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station is congested.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.14
a3ComSysTokenRingPortFrameCopiedErrorsmandatory This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a possible line hit or duplicate address.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.15
a3ComSysTokenRingPortTokenErrorsmandatory This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.16
a3ComSysTokenRingPortSoftErrorsmandatory The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Soft Errors are those which are recoverable by the MAC layer pr…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.17
a3ComSysTokenRingPortHardErrorsmandatory The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or receiving beacon MAC frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.18
a3ComSysTokenRingPortTransmitBeaconsmandatory The number of times this interface has transmitted a beacon frame.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.19
a3ComSysTokenRingPortLobeWiresmandatory The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed when this condition occurs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.20
a3ComSysTokenRingPortRemovesmandatory The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.21
a3ComSysTokenRingPortSinglesmandatory The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if there is a hardware problem.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.22
a3ComSysTokenRingPortFreqErrorsoptional The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.13.2.1.23
a3ComSysTokenRingPortRingStatusmandatory The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an open is completed, this object has the v…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.13.2.1.24

A list of entries which describe file transfers.

a3ComSysFtTableEntry row .1.3.6.1.4.1.43.29.4.14.1.1

A description of a particular file transfer entry.

Indexes

a3ComSysFtIndex

Column	Syntax	OID
a3ComSysFtIndexmandatory A unique index used to identifying this entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.14.1.1.1
a3ComSysFtDirectionmandatory Specifies the direction of the file transfer.	Enumerationr/w Enumerated Values: 1 localToRemote 2 remoteToLocal	.1.3.6.1.4.1.43.29.4.14.1.1.2
a3ComSysFtLocalStorageTypemandatory The type of storage on the local system to be used as the source/destination for the file transfer.	A3ComSysStorageTyper/w Type Constraints: range: 1..3	.1.3.6.1.4.1.43.29.4.14.1.1.3
a3ComSysFtLocalResourceTypemandatory The type of resource on the local system to be used as the source/destination for the file transfer.	A3ComSysResourceTyper/w Type Constraints: range: 1..3	.1.3.6.1.4.1.43.29.4.14.1.1.4
a3ComSysFtLocalResourceMaskmandatory The indices of the resources on the local system to be used as the source/destination for the file transfer. The type of resource to which these indices apply is specified by the corresponding value of a3ComSysFtLocalRe…	A3ComSysResourceBitMaskr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.29.4.14.1.1.5
a3ComSysFtLocalResourceAttributemandatory An identifier which specifies the particular resource attribute on the local system which is the source/destination of the file transfer. The resource(s) to which this attribute applies is specified by the corresponding…	ObjectIdentifierr/w	.1.3.6.1.4.1.43.29.4.14.1.1.6
a3ComSysFtRemoteAddressTypemandatory The type of address which is specified by the corresponding value of a3ComSysFtRemoteAddress.	A3ComSysAddressTyper/w Type Constraints: range: 1..2	.1.3.6.1.4.1.43.29.4.14.1.1.7
a3ComSysFtRemoteAddressmandatory The address of the source/destination file on the remote system.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.43.29.4.14.1.1.8
a3ComSysFtRemoteFileNamemandatory The full path name of the source/destination file on the remote system.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.43.29.4.14.1.1.9
a3ComSysFtRemoteUserNamemandatory The user name to be used when requesting the file transfer to/from the remote system.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.43.29.4.14.1.1.10
a3ComSysFtRemoteUserPasswordmandatory The password to be used when requesting the file transfer to/from the remote system. When read, this object returns a zero length string. Note that, for security reasons, some ftp servers may insist on a non-zero length…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.43.29.4.14.1.1.11
a3ComSysFtForceTransfermandatory Setting this object to true makes the agent ignore non-fatal (i.e. version/id mismatch) errors encountered during a file transfer request.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.14.1.1.12
a3ComSysFtBytesTransferredmandatory The number of bytes successfully transferred.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.14.1.1.13
a3ComSysFtStatusmandatory The status of the file transfer.	Enumeration Enumerated Values: 1 statusSuccessfulCompletion 2 statusInProgress 3 statusLocalInvalid 4 statusRemoteInvalid 5 statusRemoteUnreachable 6 statusUserAuthFailed 7 statusFileNotFound 8 statusFileTooBig 9 statusFileIncompatible 10 statusError	.1.3.6.1.4.1.43.29.4.14.1.1.14
a3ComSysFtDetailedStatusmandatory Detailed status for the transfer for the particular local resource attribute specified by the corresponding values of a3ComSysFtLocalStorageType, a3ComSysFtLocalResourceType, a3ComSysFtLocalResourceMask, and a3ComSysFt…	ObjectIdentifier	.1.3.6.1.4.1.43.29.4.14.1.1.15
a3ComSysFtDetailedStatusStringmandatory Detailed status description for the requested transfer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.14.1.1.16
a3ComSysFtOwnerStringmandatory A string describing the creator/owner of this entry.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.43.29.4.14.1.1.17
a3ComSysFtRowStatusmandatory The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAnd…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.29.4.14.1.1.18

A list of configured IP interfaces.

a3ComSysIpInterfaceEntry row .1.3.6.1.4.1.43.29.4.15.2.2.1

An individual IP interface.

Indexes

a3ComSysIpInterfaceIpStackIndex a3ComSysIpInterfaceAddr a3ComSysIpInterfaceNetMask

Column	Syntax	OID
a3ComSysIpInterfaceIpStackIndexmandatory The index of the IP stack identified by this entry relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.15.2.2.1.1
a3ComSysIpInterfaceAddrmandatory The IP address of this entry within the IP stack identified within this entry.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.29.4.15.2.2.1.2
a3ComSysIpInterfaceNetMaskmandatory The subnet mask associated with this IP interface. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.29.4.15.2.2.1.3
a3ComSysIpInterfaceIndexmandatory The index value which uniquely identifies the interface to which this entry is applicable. lspIPInterfaceIndex maps to the same interface as identified by ifIndex in the ifTable. Currently, this object can not be modi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.15.2.2.1.4
a3ComSysIpInterfaceBcastAddrmandatory This object represents the value of the least significant bit of this entry's direct broadcast address. For example, a value of one signifies that the host portion of the broadcast address is set to all ones.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.15.2.2.1.5
a3ComSysIpInterfaceCostmandatory The route cost metric used for this entry.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.43.29.4.15.2.2.1.6
a3ComSysIpInterfaceStatusmandatory The status column for this IP interface. This object can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object to createAndGo(4) causes the ag…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.29.4.15.2.2.1.7

A list of configured IPX interfaces.

a3ComSysIpxInterfaceEntry row .1.3.6.1.4.1.43.29.4.16.2.2.1

An individual IPX interface.

Indexes

a3ComSysIpxInterfaceIpxStackIndex a3ComSysIpxInterfaceNetNumber

Column	Syntax	OID
a3ComSysIpxInterfaceIpxStackIndexmandatory The index of the IPX stack identified by this entry relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.16.2.2.1.1
a3ComSysIpxInterfaceNetNumbermandatory The IPX Network Number of this entry.	IpxNetworkNumber Type Constraints: range: 4	.1.3.6.1.4.1.43.29.4.16.2.2.1.2
a3ComSysIpxInterfaceIfIndexmandatory The ifIndex of the virtual interface that this IPX interface is is configured over. The a3ComSysIpxInterfaceIfIndex identifies a virtual interface, for example a VLAN, that this local address is associated with for pu…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.16.2.2.1.3
a3ComSysIpxInterfaceCostmandatory The cost associated with the IPX address of this entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.16.2.2.1.4
a3ComSysIpxInterfaceFrameTypemandatory The frame format used for routing frames on this IPX interface. The framing formats are for ethernet ports. There are two frame formats for FDDI ports: 802.2 and FDDI SNAP. The correct FDDI format is automatically ch…	Enumerationr/w Enumerated Values: 1 frame-ethernetII 2 frame-802-2 3 frame-802-3-Raw 4 frame-SNAP	.1.3.6.1.4.1.43.29.4.16.2.2.1.5
a3ComSysIpxInterfaceStatusmandatory The status column for this IPX interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object ot createAndGo(4) causes the a…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.29.4.16.2.2.1.6

A list of AppleTalk ports for this entity.

a3ComSysAtInterfaceEntry row .1.3.6.1.4.1.43.29.4.17.2.2.1

An individual appletalk interface entry.
Appletalk entries with row status of active(1)
cannot be modified but must set to destroy(6)
and recreated.

Indexes

a3ComSysAtInterfaceAtStackIndex a3ComSysAtInterfaceIfIndex

Column	Syntax	OID
a3ComSysAtInterfaceAtStackIndexmandatory The index of the Appletalk stack identified by this entry relative to this agent. Setting of this object is required for all interface creations.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.17.2.2.1.1
a3ComSysAtInterfaceNetAddressmandatory The AppleTalk network address configured for this port.	DdpNodeAddress Type Constraints: range: 3	.1.3.6.1.4.1.43.29.4.17.2.2.1.2
a3ComSysAtInterfaceTypemandatory The type of interface that is configured for this port. Setting of this object is required for all interface creations.	Enumerationr/w Enumerated Values: 1 seedInterface 2 nonseedInterface	.1.3.6.1.4.1.43.29.4.17.2.2.1.3
a3ComSysAtInterfaceNetStartmandatory The first AppleTalk network address in the range configured for this port. If this port is not a native AppleTalk port, this object shall have the value of two octets of zero. Setting of this object is mandatory only f…	ATNetworkNumberr/w Type Constraints: range: 2	.1.3.6.1.4.1.43.29.4.17.2.2.1.4
a3ComSysAtInterfaceNetEndmandatory The last AppleTalk network address in the range configured for this port. If the network to which this AppleTalk port is connected is a non-extended network, or if it is not a native AppleTalk port, the value for a3Com…	ATNetworkNumberr/w Type Constraints: range: 2	.1.3.6.1.4.1.43.29.4.17.2.2.1.5
a3ComSysAtInterfaceZoneDefaultmandatory The name of the default zone for this port. If this port only has one zone, that zone is represented here. Setting of this object is mandatory for interfaces with a3ComSysAtInterfaceType equal to seedInt…	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.6
a3ComSysAtInterfaceZone1mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.7
a3ComSysAtInterfaceZone2mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.8
a3ComSysAtInterfaceZone3mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.9
a3ComSysAtInterfaceZone4mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.10
a3ComSysAtInterfaceZone5mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.11
a3ComSysAtInterfaceZone6mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.12
a3ComSysAtInterfaceZone7mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.13
a3ComSysAtInterfaceZone8mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.14
a3ComSysAtInterfaceZone9mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.15
a3ComSysAtInterfaceZone10mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.16
a3ComSysAtInterfaceZone11mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.17
a3ComSysAtInterfaceZone12mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.18
a3ComSysAtInterfaceZone13mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.19
a3ComSysAtInterfaceZone14mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.20
a3ComSysAtInterfaceZone15mandatory Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1).	ATNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.43.29.4.17.2.2.1.21
a3ComSysAtInterfaceIfIndexmandatory The interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the ifTable. Setting o…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.17.2.2.1.22
a3ComSysAtInterfaceStatemandatory The current state of the appletalk interface.	Enumeration Enumerated Values: 1 unused 2 initialize 3 terminate 4 failed 5 down 6 validate 7 discover 8 waiting 9 enabled	.1.3.6.1.4.1.43.29.4.17.2.2.1.23
a3ComSysAtInterfaceStatusmandatory The status column for this IP interface. This object can be set to: createAndGo(4) createAndWait(5) destroy(6) The following value may be read: active(1) notInService(2) Setting this objec…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.29.4.17.2.2.1.24

A list of module card information entries.  A single entry exists in
this list for each modular component in the system.

a3ComSysModuleCardInfoEntry row .1.3.6.1.4.1.43.29.4.18.2.1

A module card info entry contains information about a
particular modular component within the system.

Indexes

a3ComSysModuleCardInfoIndex

Column	Syntax	OID
a3ComSysModuleCardInfoIndexmandatory The index of the modular component identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.18.2.1.1
a3ComSysModuleCardInfoFamilymandatory The family code for this module.	Enumeration Enumerated Values: 1 coreBuilder3500 2 superStack7000 3 superStack9000 17 coreBuilder9000-RF12R 18 coreBuilder9000-RF6MC 19 coreBuilder9000-LF20R 20 coreBuilder9000-LF10MC 21 coreBuilder9000-LF36T 22 coreBuilder9000-FG24 23 coreBuilder9000-FG9 24 coreBuilder9000-LG9MC 25 coreBuilder9000-LG9	.1.3.6.1.4.1.43.29.4.18.2.1.2
a3ComSysModuleCardInfoGenericTypemandatory The generic type code for this module.	Enumeration Enumerated Values: 1 backplaneOrMotherboard 2 processorBoard 3 enet10MbAnd100MbAdaptor 4 enet1GbAdaptor 5 fddiAdaptor 6 atmAdaptor	.1.3.6.1.4.1.43.29.4.18.2.1.3
a3ComSysModuleCardInfoSpecificTypemandatory The specific type code for this module.	Enumeration Enumerated Values: 1 notApplicable 161 atmSonetOC3Fiber 162 atmSonetOC12Fiber 163 atmSonetOC3Copper 164 atmSonetOC12Copper 177 enet1Gb850nMMultimodeFiber 178 enet1Gb1300nMFiber 179 enet1GbCoax 180 packetSwitchingFabric1000BaseBackplane 181 enet1Gb1000BaseTx 183 enet1000BaseSxMmfSCandGBIC 225 enet100Mb100BaseTx 226 enet10or100BaseTxTelco 227 enet100Mb100BaseFx 228 enet100Mb100BaseT4 229 enet100Mb100BaseTxSTP 230 enet100Mb100BaseT2 241 fddiMultimodeSC 242 fddiSingleModeSC 243 fddiCopperUTP 244 fddiCopperSTP	.1.3.6.1.4.1.43.29.4.18.2.1.4
a3ComSysModuleCardInfoPartNumbermandatory The specific part number for this module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.18.2.1.5
a3ComSysModuleCardInfoManufacturingDatemandatory The date that this module was manufactured in the format mm/dd/yyyy.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.18.2.1.6
a3ComSysModuleCardInfoModuleSerialNumbermandatory 3Com serial number.	OctetString Constraints: range: 12-12	.1.3.6.1.4.1.43.29.4.18.2.1.7
a3ComSysModuleCardInfoTLASerialNumbermandatory TOP level assembly serial number for boards with non-removable daughter cards. Null string for all other board types.	OctetString Constraints: range: 12-12	.1.3.6.1.4.1.43.29.4.18.2.1.8
a3ComSysModuleCardInfo3CNumbermandatory On a backplane or non-removable module this is the 3C number of the chassis. On a removable module this is the 3C number of the module.	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.43.29.4.18.2.1.9
a3ComSysModuleCardInfoICTTestStatusmandatory 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.18.2.1.10
a3ComSysModuleCardInfoICTTestRevisionmandatory Manufacturing ATE test revision number (XX.XX).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.18.2.1.11
a3ComSysModuleCardInfoSystemTestStatusmandatory 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.18.2.1.12
a3ComSysModuleCardInfoFunctionalTestStatusmandatory 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.18.2.1.13
a3ComSysModuleCardInfoFunctionalTestRevisionmandatory Manufacturing functional test revision number (XX.XX).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.18.2.1.14
a3ComSysModuleCardInfoBoardRevisionmandatory Board revision code.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.18.2.1.15
a3ComSysModuleCardInfoRuntimeHoursmandatory A total count of the number of hours this module has been in operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.18.2.1.16

A list of module card information entries.  A single entry exists in
this list for each modular component in the system.

a3ComSysDiagnosticsInfoEntry row .1.3.6.1.4.1.43.29.4.19.1.1

A diagnostics info entry contains information about a particular
diagnostics event on a modular component within the system.

Indexes

a3ComSysDiagnosticsInfoIndex

Column	Syntax	OID
a3ComSysDiagnosticsInfoIndexmandatory The index of the diagnostics modular component identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.19.1.1.1
a3ComSysDiagnosticsInfoPOVDiagnosticsRevisionmandatory The revision of the POV (power on verification) diagnostics software at the most recent failure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.19.1.1.2
a3ComSysDiagnosticsInfoExtendedDiagnosticsRevisionmandatory The revision of the extended diagnostics software at the most recent failure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.19.1.1.3
a3ComSysDiagnosticsInfoDiagnosticFailureCodemandatory The code written by the diagnostics at the most recent failure. This identifies both the test number and failure code in the following format: <testNumber>-<errorCode>. If there is no failure then 000-000 is displaye…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.19.1.1.4
a3ComSysDiagnosticsInfoDiagnosticFailureDateTimemandatory The date and time of the most recent diagnostic failure for the module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.29.4.19.1.1.5
a3ComSysDiagnosticsInfoDiagnosticFailureSlotNumbermandatory The slot number (network adapter cards only) of the most recent diagnostic failure for the module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.19.1.1.6
a3ComSysDiagnosticsInfoDiagnosticFailureCountermandatory The total number of diagnostic failures logged against this module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.19.1.1.7
a3ComSysDiagnosticsInfoDiagnosticFieldDOACountermandatory The total number of failures occurring at this module during the first 48 hours of operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.19.1.1.8