A3COM-SWITCHING-SYSTEMS-FDDI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
36

a3ComFddiSMTTable

table mandatory
.1.3.6.1.4.1.43.29.10.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiSMTTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiSMTTable' 
A list of optional SMT entries.  The number of entries 
shall not exceed the value of snmpFddiSMTNumber.
a3ComFddiSMTEntry row .1.3.6.1.4.1.43.29.10.1.1.1
An optional SMT entry containing information common to
a given optional SMT.
Indexes
Column Syntax OID
a3ComFddiSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.1.1.1.1
a3ComFddiSMTManufacturerOUImandatory
The three octets of manufacturer data which make
up the manufacturerOUI component.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.43.29.10.1.1.1.2
a3ComFddiSMTManufacturerDatamandatory
The 29 octets of manufacturer data which make up the
manufacturerData component.
OctetString
Constraints:
range: 29-29
 .1.3.6.1.4.1.43.29.10.1.1.1.3
a3ComFddiSMTHoldStatemandatory
This variable indicates the current state of the
Hold function. The value 'not-holding' is the
default and initial value. The value must be set
to 'not-holding' as part of Active-Actions and
when the conditions cau…
Enumeration
Enumerated Values:
1not-implemented
2not-holding
3holding-prm
4holding-sec
 .1.3.6.1.4.1.43.29.10.1.1.1.4
a3ComFddiSMTSetCountmandatory
This variable is composed of a count incremented
in response to a Set operation on the MIB, and the
time of the change, however only the count is
reported here (refer to ANSI SMT 8.4.1).
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.10.1.1.1.5
a3ComFddiSMTLastSetStationIdmandatory
The Station ID of the station that effected the last
change in the FDDI MIB.
FDDI-SMT73-MIBFddiSMTStationIdType
Type Constraints:
range: 8
 .1.3.6.1.4.1.43.29.10.1.1.1.6

a3ComFddiMACBridgeFunctionTable

table mandatory
.1.3.6.1.4.1.43.29.10.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiMACBridgeFunctionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACBridgeFunctionTable' 
A list of MAC bridge function entries.
a3ComFddiMACBridgeFunctionEntry row .1.3.6.1.4.1.43.29.10.2.1.1
Bridge function information for a given MAC
within a given SMT.
Indexes
Column Syntax OID
a3ComFddiMACBridgeFunctionSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.1.1.1
a3ComFddiMACBridgeFunctionMACIndexmandatory
Index variable for uniquely identifying the MAC
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.1.1.2
a3ComFddiMACBridgeFunctionsmandatory
Indicates the MAC's optional bridging functions.

The Value -1 is used to indicate that bridging is
not supported by this MAC.

The value is a sum. This value initially takes
the value z…
Integer32
Constraints:
range: -1-7
 .1.3.6.1.4.1.43.29.10.2.1.1.3

a3ComFddiMACTPriTable

table mandatory
.1.3.6.1.4.1.43.29.10.2.2 · 1 row entry · 9 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiMACTPriTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACTPriTable' 
A list of MAC T-Pri entries.
a3ComFddiMACTPriEntry row .1.3.6.1.4.1.43.29.10.2.2.1
A collection of T-Pri information for a given MAC within
a given SMT.
Indexes
Column Syntax OID
a3ComFddiMACTPriSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.2.1.1
a3ComFddiMACTPriMACIndexmandatory
Index variable for uniquely identifying the MAC
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.2.1.2
a3ComFddiMACTPri0mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.3
a3ComFddiMACTPri1mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.4
a3ComFddiMACTPri2mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.5
a3ComFddiMACTPri3mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.6
a3ComFddiMACTPri4mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.7
a3ComFddiMACTPri5mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.8
a3ComFddiMACTPri6mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.9

a3ComFddiPATHRingTable

table mandatory
.1.3.6.1.4.1.43.29.10.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiPATHRingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiPATHRingTable' 
A list of PATH ring entries.
a3ComFddiPATHRingEntry row .1.3.6.1.4.1.43.29.10.3.1.1
Ring latency, trace status, and T-Rmode information for a
given PATH within a given SMT.
Indexes
Column Syntax OID
a3ComFddiPATHRingSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.3.1.1.1
a3ComFddiPATHRingPATHIndexmandatory
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.29.10.3.1.1.2
a3ComFddiPATHRingLatencymandatory
Gives the total accumulated latency of the ring
associated with this path. May be measured directly
by the station or calculated by a management station.
Values of this object are reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNanor/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.3.1.1.3
a3ComFddiPATHTraceStatusmandatory
This attribute indicates the current trace status of
the path.

The value is a sum which represents all of the trace
status information which applies. This value initially
takes the value zero, then f…
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.43.29.10.3.1.1.4
a3ComFddiPATHT-Rmodemandatory
Used by RMT to limit the duration of restricted dialogs
on a path. This object is reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNanor/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.3.1.1.5

a3ComFddiPATHSbaTable

table mandatory
.1.3.6.1.4.1.43.29.10.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiPATHSbaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiPATHSbaTable' 
A list of PATH Sba entries.
a3ComFddiPATHSbaEntry row .1.3.6.1.4.1.43.29.10.3.2.1
Sba information for a given PATH within a given SMT.
Indexes
Column Syntax OID
a3ComFddiPATHSbaSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.3.2.1.1
a3ComFddiPATHSbaPATHIndexmandatory
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.29.10.3.2.1.2
a3ComFddiPATHSbaPayloadmandatory
The payload portion of the Synchronous Bandwidth
Allocation for thi path. This value represents the
maximum number of bytes of data allocated for
transmission per 125 microseconds.
Integer32r/w
Constraints:
range: 0-1562
 .1.3.6.1.4.1.43.29.10.3.2.1.3
a3ComFddiPATHSbaOverheadmandatory
The overhead portion of the Synchronous Bandwith
Allocation for this path. This value repersents the
maximum number of bytes overhead (token capture, frame
header, etc.) used pre negotiated Target Token Rotation
Ti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.10.3.2.1.4
a3ComFddiPATHSbaAvailablemandatory
This value is the maximum Synchronous Bandwith available
for a path in bytes per second.
Integer32r/w
Constraints:
range: 0-12500000
 .1.3.6.1.4.1.43.29.10.3.2.1.5

a3ComFddiPORTTable

table mandatory
.1.3.6.1.4.1.43.29.10.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiPORTTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiPORTTable' 
A list of optional PORT entries.
a3ComFddiPORTEntry row .1.3.6.1.4.1.43.29.10.4.1.1
MAC loop time and EB error count information for a
given PORT within a given SMT.
Indexes
Column Syntax OID
a3ComFddiPORTSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.1.1.1
a3ComFddiPORTIndexmandatory
Index variable for uniquely identifying the PORT
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.1.1.2
a3ComFddiPORTMACLoopTimemandatory
This attribute controls the value used for T-Next(9)
(see 9.4.4.2.3). This object is reported in 1 ns
units.
FDDI-SMT73-MIBFddiTimeNanor/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.4.1.1.3
a3ComFddiPORTEBErrorCtmandatory
A count that should as closely as possible match the
times an Elasticity Buffer Error has occurred while in
active line state.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.10.4.1.1.4

a3ComFddiPORTLSTable

table mandatory
.1.3.6.1.4.1.43.29.10.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFddiPORTLSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiPORTLSTable' 
A list of optional PORT line state entries.
a3ComFddiPORTLSEntry row .1.3.6.1.4.1.43.29.10.4.2.1
Maintenance line state and PC line state information
for a given PORT within a given SMT.
Indexes
Column Syntax OID
a3ComFddiPORTLSSMTIndexmandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.2.1.1
a3ComFddiPORTLSPORTIndexmandatory
Index variable for uniquely identifying the PORT
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.2.1.2
a3ComFddiPORTMaintLSmandatory
The PORT Maintenance Line State specifies the line state
(Maint-LS) to be transmitted when the PCM state machine
for the port is in state PC9 Maint.
Enumerationr/w
Enumerated Values:
1quiet
2idle
3master
4halt
5receive-active
6receive-unknown
7receive-noise
 .1.3.6.1.4.1.43.29.10.4.2.1.3
a3ComFddiPORTPCLSmandatory
This attribute indicates the line state (PC-LS) received
by the port.
Enumeration
Enumerated Values:
1quiet
2idle
3master
4halt
5receive-active
6receive-unknown
7receive-noise
 .1.3.6.1.4.1.43.29.10.4.2.1.4