aal2CidCompletedCalls
ZhoneAAL2-MIB ·
.1.3.6.1.4.1.5504.4.2.1.2.1.23
Object
column
SNMPv2-SMICounter32
Total number of completed calls made on the CID.
Context
- MIB
- ZhoneAAL2-MIB
- OID
.1.3.6.1.4.1.5504.4.2.1.2.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aal2CidEntry
- Table
- aal2CidTable
- Siblings
- 23
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2Cid The Channel Identifier is one of the indices for
the CID table.
The maximum number of connections allowed per ATM
VCL is 255. Note that there are restrictions in
t… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.1 |
| aal2CidCAS CAS (Channel Associated Signaling).
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.10 |
| aal2CidDTMFDialedDigits DTMF Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZM… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.11 |
| aal2CidMfR1DialedDigits MF-R1 Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or Z… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.12 |
| aal2CidMfR2DialedDigits MF-R2 Dialed Digits.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or Z… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.13 |
| aal2CidPCMEncoding PCM Encoding.
Refer to the corresponding object in the VCL
table.
Valid values are muLaw and aLaw. If this
value is not set by CLI or ZMS, the agent… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.14 |
| aal2CidMaxLengthFrame Max length frame mode data.
Refer to the corresponding object in the VCL
table.
Valid values are 1..65535. If this value is
not set by CLI or ZMS,… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.15 |
| aal2CidMaxSDULength Max_SDU_Length
Refer to the corresponding object in the VCL
table.
Valid values are 1..65568. If this value is
not set by CLI or ZMS, the agent wil… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.16 |
| aal2CidRasTimer Reassembly timer (RAS_Timer).
Refer to the corresponding object in the VCL
table.
If this value is not set by CLI or ZMS, the
agent will use the AA… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.2.1.17 |
| aal2CidPreferredApIndex Index for the preferred audio encoding format within
the Audio Profile. The Index must be an agreed
operating parameter between the transmitter and
receiver for both directions. A… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.2.1.18 |
| aal2CidCellsReceived Total cells received | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.2.1.19 |
| aal2CidAdminStatus This object is instantiated only for a VCL
which terminates a VCC (i.e., one which is NOT
cross-connected to other VCLs). Its value
specifies the desired administrative state of
… | column | ATM-TC-MIBAtmVorXAdminStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.2 |
| aal2CidCellsSent Total cells sent | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.2.1.20 |
| aal2CidStatsTimeElapsed The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.2.1.21 |
| aal2CidRowStatus Used to control row creation and deletion.
A row in this table is created using a
single SNMP SET request with varbinds for:
a) aal2CidRowStatus set to'CreateAndG… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.22 |
| aal2CidBlockedCallsNoBandwidth Total number of calls blocked on the CID because there
was not enough bandwidth to support the call. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.4.2.1.2.1.24 |
| aal2CidOperStatus The current operational status of the CID.
Valid values are up, down, and unknown. | column | ATM-TC-MIBAtmVorXOperStatus | .1.3.6.1.4.1.5504.4.2.1.2.1.3 |
| aal2CidLastChange The value of sysUpTime at the time this CID
entered its current operational state,
indicated by aal2CidOperStatus. | column | ATM-TC-MIBAtmVorXLastChange | .1.3.6.1.4.1.5504.4.2.1.2.1.4 |
| aal2CidSscsType The SSCS type that applies to each channel of
an AAL2 VCC will vary according to the usage
of that channel. Channels that are used to
carry media streams (POTS or ISDN B-chann… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.5 |
| aal2CidAudioService Audio Service.
Refer to the corresponding object in the VCL
table.
Valid values are:
- enabled.
- disabled.
- enabledEchoCancelOff: audio service ena… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.6 |
| aal2CidCircuitModeData Circuit Mode Data.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZMS… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.7 |
| aal2CidFrameModeData Frame Mode Data.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set by CLI or ZMS,… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.8 |
| aal2CidFaxDemoRemo Fax Demodulation/Remodulation.
Refer to the corresponding object in the VCL
table.
Valid values are enabled and disabled. If
this value is not set b… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.2.1.9 |